All MIBs › LaserJet-Series8000-Stapler-MIB › prtoutputmindimxfeeddir
prtoutputmindimxfeeddir
Module: LaserJet-Series8000-Stapler-MIB
OID (symbolic): LaserJet-Series8000-Stapler-MIB::prtoutputmindimxfeeddir
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The minimum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (DimUnit). If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed with management protocol operations. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: The value returned by this object depends on the value of prtOutputDimUnit. For example, for the built-in output trays, it is 36700 if prtOutputDimUnit is ePtenThousandthsOfInches or 93000 if prtOutputDimUnit is ePmicrometers.
What is prtoutputmindimxfeeddir?
The narrowest sheet width, measured across the feed direction, that this output sub-unit can accept. It defines the lower bound of a bin's media envelope, which an admin can use to verify that narrow custom-size or envelope jobs will still be delivered correctly. For example, the built-in output trays report 36700 (ten-thousandths of an inch), about 3.67 inches, the minimum supported cross-feed width.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18 snmpwalk -v2c -c public <target> LaserJet-Series8000-Stapler-MIB::prtoutputmindimxfeeddir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18.1 snmpget -v2c -c public <target> LaserJet-Series8000-Stapler-MIB::prtoutputmindimxfeeddir.1
Start monitoring HP LaserJet 8000 series printer with stapler/finisher accessory with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet-Series8000-Stapler-MIB::prtoutputmindimxfeeddir OID value, configure state conditions and alerts, and monitor any HP LaserJet 8000 series printer with stapler/finisher accessory from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | printmib | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9 | prtOutput | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2 | prtOutputTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1 | prtOutputEntry | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18 | prtoutputmindimxfeeddir | LaserJet-Series8000-Stapler-MIB |