All MIBs › LaserJet-Series8000-Stapler-MIB › prtinputmedialoadtimeout
prtinputmedialoadtimeout
Module: LaserJet-Series8000-Stapler-MIB
OID (symbolic): LaserJet-Series8000-Stapler-MIB::prtinputmedialoadtimeout
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer will wait for the duration (in seconds) specified by this object. Upon expiration of the timeout, the printer will take the action specified by prtInputNextIndex. The event which causes the printer to enter the waiting state is product specific. If the printer is not waiting for manually fed media, it may switch from an empty subunit to a different subunit without waiting for the timeout to expire. A value of (-1) implies 'other' or 'infinite' which translates to 'wait forever'. The action which causes printing to continue is product specific. A value of (-2) implies 'unknown'.
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: This object simply reflects the value of the JOB-INPUT-AUTO-CONTINUE-TIMEOUT object. See the description of that object for additional information.
What is prtinputmedialoadtimeout?
Specifies, in seconds, how long the printer will wait for a required input tray to be manually loaded before acting on the timeout, with -1 meaning wait forever and -2 meaning unknown. It mirrors the printer's JOB-INPUT-AUTO-CONTINUE-TIMEOUT setting, so an admin who wants unattended jobs to fail fast rather than hang indefinitely should configure a defined timeout instead of -1. For example, a value of 300 means the printer waits five minutes for someone to load legal-size paper before triggering the action specified by prtinputnextindex.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24 snmpwalk -v2c -c public <target> LaserJet-Series8000-Stapler-MIB::prtinputmedialoadtimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24.1 snmpget -v2c -c public <target> LaserJet-Series8000-Stapler-MIB::prtinputmedialoadtimeout.1
Start monitoring HP LaserJet 8000 series printer with stapler/finisher accessory with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet-Series8000-Stapler-MIB::prtinputmedialoadtimeout OID value, configure state conditions and alerts, and monitor any HP LaserJet 8000 series printer with stapler/finisher accessory from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | printmib | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8 | prtInput | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2 | prtInputTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1 | prtInputEntry | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24 | prtinputmedialoadtimeout | LaserJet-Series8000-Stapler-MIB |