LaserJet-Series4000-MIB :: prtinputtype

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsLaserJet-Series4000-MIBprtinputtype

prtinputtype

Module: LaserJet-Series4000-MIB

OID (symbolic): LaserJet-Series4000-MIB::prtinputtype

OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for a descriptor field to further qualify the other choice. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: Tray 1 is the multi-purpose tray and is always present. It supports both sheets and envelopes. Its type is ePsheetFeedAutoNonRemovableTray. Tray 2 is a removable tray that comes standard with the printer, although it is usually not removed from the printer. It is of type ePsheetFeedAutoRemovableTray. Tray 3 is either a 250-sheet standard tray in the 2x250 base engine configuration or a 500-sheet optional tray in the 1x500 base engine configuration. (The optional tray is only recognized if it's installed before the printer is powered on.) It is of type ePsheetFeedAutoRemovableTray. The 4th tray in this array is the envelope feeder. It can be detected even when it is installed while the printer is powered on. Tray 5 is a 500-sheet optional tray that cannot be installed while the printer is powered on. It is of type ePsheetFeedAutoRemovableTray.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2
snmpwalk -v2c -c public <target> LaserJet-Series4000-MIB::prtinputtype

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2.1
snmpget -v2c -c public <target> LaserJet-Series4000-MIB::prtinputtype.1

Start monitoring HP LaserJet Series 4000 printer (JetDirect-connected) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet-Series4000-MIB::prtinputtype OID value, configure state conditions and alerts, and monitor any HP LaserJet Series 4000 printer (JetDirect-connected) from a single console.

OID Breakdown

Upper-level ancestors (16 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9net_peripheralCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4netdmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2dmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2printmibCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2.8prtInputCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2prtInputTableCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1prtInputEntryCLJ8500-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2prtinputtypeLaserJet-Series4000-MIB