LaserJet-Series4000-MIB :: prtgeneralserviceperson

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsLaserJet-Series4000-MIBprtgeneralserviceperson

prtgeneralserviceperson

Module: LaserJet-Series4000-MIB

OID (symbolic): LaserJet-Series4000-MIB::prtgeneralserviceperson

OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: The name of the person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the service person, such as a phone number. As a convention to facilitate automatic notification of the service person by the agent or a network management station, the phone number, fax number or email address should be placed on a separate line starting with ASCII LF (hex 0x0A) and the ASCII text string (without the quotes): 'phone: ', 'fax: ', and 'email: ', respectively. Phone numbers may contain digits, whitespace and parentheses, which shall be ignored. Phone numbers can also include one or more ASCII comma characters(hex 2C) to indicate a two-second pause during the dialing sequence. If either the phone,fax, or email information is not available, then a line should not included for this information. NOTE: For interoperability purposes, it is advisable to use email addresses formatted according to RFC 822 requirements. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The maximum supported string length is 32 characters. Length of 32 was chosen so a phone number could be included with the name. If the user entered string is too long, the device will store as much as possible and will return the status.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5
snmpwalk -v2c -c public <target> LaserJet-Series4000-MIB::prtgeneralserviceperson

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5.1
snmpget -v2c -c public <target> LaserJet-Series4000-MIB::prtgeneralserviceperson.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> prtgeneralserviceperson.1

Start monitoring HP LaserJet Series 4000 printer (JetDirect-connected) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet-Series4000-MIB::prtgeneralserviceperson OID value, configure state conditions and alerts, and monitor any HP LaserJet Series 4000 printer (JetDirect-connected) from a single console.

OID Breakdown

Upper-level ancestors (16 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9net_peripheralCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4netdmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2dmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2printmibCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2.5prtGeneralCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2.5.1prtGeneralTableCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1prtGeneralEntryCLJ8500-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5prtgeneralservicepersonLaserJet-Series4000-MIB