All MIBs › LaserJet-Series2100-MIB › prtgeneralserviceperson
prtgeneralserviceperson
Module: LaserJet-Series2100-MIB
OID (symbolic): LaserJet-Series2100-MIB::prtgeneralserviceperson
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The name of the person responsible for servicing this
printer. It is suggested that this string include information
that would enable other humans to reach the service person, such
as a phone number. As a convention to facilitate automatic
notification of the service person by the agent or a network
management station, the phone number, fax number or email address
should be placed on a separate line starting with ASCII LF (hex
0x0A) and the ASCII text string (without the quotes): 'phone: ',
'fax: ', and 'email: ', respectively. Phone numbers may contain
digits, whitespace and parentheses, which shall be ignored. Phone
numbers can also include one or more ASCII comma characters(hex
2C) to indicate a two-second pause during the dialing sequence.
If either the phone,fax, or email information is not available,
then a line should not included for this information.
NOTE: For interoperability purposes, it is advisable to use email
addresses formatted according to RFC 822 requirements.
Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details.
Additional information:
The maximum supported string length is 32
characters. Length of 32 was chosen so a phone number could
be included with the name.
If the user entered string is too long, the device will store
as much as possible and will return the
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5 snmpwalk -v2c -c public <target> LaserJet-Series2100-MIB::prtgeneralserviceperson
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5.1 snmpget -v2c -c public <target> LaserJet-Series2100-MIB::prtgeneralserviceperson.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> prtgeneralserviceperson.1
Start monitoring Hewlett-Packard LaserJet 2100-series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet-Series2100-MIB::prtgeneralserviceperson OID value, configure state conditions and alerts, and monitor any Hewlett-Packard LaserJet 2100-series printer from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | printmib | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5 | prtGeneral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1 | prtGeneralTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1 | prtGeneralEntry | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5 | prtgeneralserviceperson | LaserJet-Series2100-MIB |