All MIBs › LJ9055-MIB › marking_agent_density_setting
marking_agent_density_setting
Module: LJ9055-MIB
OID (symbolic): LJ9055-MIB::marking_agent_density_setting
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Returns or sets the marking agent density setting for each of the marking agents installed. The Marking Agent (aka Print) density is the instantaneous amount of marking agent applied to the media while printing. A value of zero has the lowest print density, yielding a lighter page. A value of 10 has the highest print density, yielding a darker page. The device POS will document what values are supported. Additional information: Returns or sets the print density setting. Print density is the instantaneous amount of marking agent applied to the paper while printing. A value of zero has the lowest print density, yielding a lighter page. A value of 10 has the highest print density, yielding a darker page.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9.1 snmpwalk -v2c -c public <target> LJ9055-MIB::marking_agent_density_setting
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9.1.1 snmpget -v2c -c public <target> LJ9055-MIB::marking_agent_density_setting.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9.1.1 i <value>
Start monitoring HP LaserJet 9055 multifunction printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ9055-MIB::marking_agent_density_setting OID value, configure state conditions and alerts, and monitor any HP LaserJet 9055 multifunction printer from a single console.
OID Breakdown
Upper-level ancestors (17 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | destination_subsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | print_engine | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1 | settings_prt_eng | IJ8060-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9 | marking_agent_density | LJ2300-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9.1 | marking_agent_density_setting | LJ9055-MIB |