All MIBs › LIEBERT-UPSTATION-GXT-UPS-MIB › lcUpsTestBattery
lcUpsTestBattery
Module: LIEBERT-UPSTATION-GXT-UPS-MIB
OID (symbolic): LIEBERT-UPSTATION-GXT-UPS-MIB::lcUpsTestBattery
OID (numeric): 1.3.6.1.4.1.476.1.1.1.1.7.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this variable to 'start' will initiate the battery test. Setting this variable to 'abort' will stop the battery test if the test is in- progress, otherwise it has no effect. Setting this variable to 'unknown' has no effect. Reading this variable will always result in a return value of 'unknown'. If 'lcUpsTestBatteryStatus' is 'failed' the test may not be performed again and the status will remain in the failure state.
What is lcUpsTestBattery?
This read-write field starts (start) or stops (abort) a UPS battery self-test; writing unknown has no effect, and reading it always returns unknown regardless of what was last written. Admins use it to trigger an on-demand battery test, then check lcUpsTestBatteryStatus for the result — note that once a test reports failed, the battery test can't be run again until the failure is cleared.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.476.1.1.1.1.7.1 snmpwalk -v2c -c public <target> LIEBERT-UPSTATION-GXT-UPS-MIB::lcUpsTestBattery
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.476.1.1.1.1.7.1.1 snmpget -v2c -c public <target> LIEBERT-UPSTATION-GXT-UPS-MIB::lcUpsTestBattery.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.476.1.1.1.1.7.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> lcUpsTestBattery.1
Start monitoring Liebert UPStation GXT uninterruptible power supply with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LIEBERT-UPSTATION-GXT-UPS-MIB::lcUpsTestBattery OID value, configure state conditions and alerts, and monitor any Liebert UPStation GXT uninterruptible power supply from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.476 | emerson | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1 | liebertCorp | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1.1 | liebertUps | LIEBERT-MICRO-UPS-MIB |
| 1.3.6.1.4.1.476.1.1.1 | luExtensions | LIEBERT-MICRO-UPS-MIB |
| 1.3.6.1.4.1.476.1.1.1.1 | luCore | LIEBERT-MICRO-UPS-MIB |
| 1.3.6.1.4.1.476.1.1.1.1.7 | lcUpsTest | LIEBERT-SERIES-300-UPS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.476.1.1.1.1.7.1 | lcUpsTestBattery | LIEBERT-UPSTATION-GXT-UPS-MIB |