KBRIDGE-MIB

All MIBs › KBRIDGE-MIB

Organization: KarlNet Incorporated

Last Updated: 2002-01-28

Category: Wireless and WLAN

Description: KarlNet Incorporated MIB for managing wireless bridge configuration and link status on KarlNet Wi-Fi bridging products.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is KBRIDGE-MIB?

KBRIDGE-MIB is a KarlNet Incorporated enterprise MIB for managing KarlNet's wireless Ethernet bridging products, which were used to extend LANs over point-to-point or point-to-multipoint wireless radio links. The available source only identifies the module's placement in KarlNet's enterprise OID tree and does not list concrete object or table names, but modules of this kind typically expose radio/link configuration and wireless link status. Its likely purpose is to help confirm whether a wireless bridge link is up and performing acceptably, i.e., monitoring the software/link-layer status of the bridging function rather than deep hardware sensor data. No explicit dependency on other standard MIBs is indicated. It would have been deployed on KarlNet wireless bridge units linking remote LAN segments, largely a legacy product line by current standards, though the KBRIDGE-MIB download is still available for administrators maintaining these older wireless bridges.

IPNetwork Monitor allows you to monitor SNMP objects defined in KBRIDGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

KarlNet wireless Ethernet bridge

Monitoring Examples

No usable sample object names were provided for this module (the source objects list is empty/placeholder), so a concrete polling example referencing real OIDs cannot be given honestly.

Imported Objects

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

How to Use in IPNetwork Monitor

Example using kbWirelessStationExclHellos OID:

Select a KarlNet wireless Ethernet bridge as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type kbWirelessStationExclHellos into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of Hello packets from the KarlBridge that were received by the remote station with Excellent signal quality. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
karlnet	1.3.6.1.4.1.762			The MIB module for KarlNet entities. iso(1).org(3).dod(6).internet(1).mgmt(4).enterprises(1).karlnet(762)
kbridge_mib	1.3.6.1.4.1.762.2
karlNetKBControl	1.3.6.1.4.1.762.2.1
INT kbControlReboot	1.3.6.1.4.1.762.2.1.6	INTEGER	write-only	Set this OID value to 1 to reboot the KarlBridge.
INT kbControlTestSNMPWrite	1.3.6.1.4.1.762.2.1.9	INTEGER	write-only	This OID is provided to test whether your SNMP software can successfully set an OID on the KarlBridge by setting its value to 1.
INT kbControlShutdown	1.3.6.1.4.1.762.2.1.11	INTEGER	write-only	Set this OID to 1 to shutdown the KarlBridge.
INT kbControlTemperature	1.3.6.1.4.1.762.2.1.12	INTEGER	read-only	For KarlBridges equipped with a Dallas temperature chip, returns the temperature of the Dallas chip in 1/2 degree centigrade increments (+/- 0.5 degrees C). To determine the correct temperature in Centigrade, divide by 2. To determine the correct temperature in Fahrenheit, divide by 2, then multiply by 9/5 and add 32. KarlBridges that are not equipped with the Dallas chip return a 'noSuchName' error.
kbWireless	1.3.6.1.4.1.762.2.5
INT kbWirelessStationNumber	1.3.6.1.4.1.762.2.5.1	INTEGER	read-only	The number of registered stations (i.e. valid entries) in the kbWirelessStationTable.
kbWirelessStationTable	1.3.6.1.4.1.762.2.5.2		not-accessible	List of wireless connections and their attributes. Each entry in the table corresponds to a particular wireless station (usually a satellite) that is attached to a particular wireless interface.
kbWirelessStationEntry	1.3.6.1.4.1.762.2.5.2.1		not-accessible	An entry in the kbWirelessStationTable. Each entry corresponds to a particular wireless station connected to one of the KarlBridge's interfaces. The entries are indexed by kbWirelessStationIndex and also can be generally considered unique based upon the kbWirelessStationMACAddress field.
U32 kbWirelessStationIndex	1.3.6.1.4.1.762.2.5.2.1.1	Unsigned32	read-only	The index of this entry in the kbWirelessStationTable. Each entry in the table has a unique kbWirelessStationIndex.
U32 kbWirelessStationInterfaceNumber	1.3.6.1.4.1.762.2.5.2.1.2	Unsigned32	read-only	The interface number of the wireless network interface that this entry is attached to. When a KarlBridge contains multiple wireless network interfaces, different entries may contain different values for this field. Interface numbering includes non-wireless interfaces, with the first network interface being number 1.
OCT kbWirelessStationName	1.3.6.1.4.1.762.2.5.2.1.3	OCTET STRING	read-only	The name of the remote wireless station as reported to the KarlBridge.
C32 kbWirelessStationExclHellosEx	1.3.6.1.4.1.762.2.5.2.1.4	Counter32	read-only	The number of Hello packets from the KarlBridge that were received by the remote station with Excellent signal quality.
C32 kbWirelessStationGoodHellos	1.3.6.1.4.1.762.2.5.2.1.5	Counter32	read-only	The number of Hello packets from the KarlBridge that were received by the remote station with Good signal quality.
C32 kbWirelessStationLowHellos	1.3.6.1.4.1.762.2.5.2.1.6	Counter32	read-only	The number of Hello packets from the KarlBridge that were received by the remote station with Low signal quality.
G32 kbWirelessStationSignalLevel	1.3.6.1.4.1.762.2.5.2.1.7	Gauge32	read-only	The radio signal level in percentage.
G32 kbWirelessStationNoiseLevel	1.3.6.1.4.1.762.2.5.2.1.8	Gauge32	read-only	The radio noise level in percentage.
G32 kbWirelessStationSignalQuality	1.3.6.1.4.1.762.2.5.2.1.9	Gauge32	read-only	The relative signal quality of the radio transmissions.
C32 kbWirelessStationPktTransmits	1.3.6.1.4.1.762.2.5.2.1.10	Counter32	read-only	The number of Ethernet packets the remote station has transmitted through the wireless interface connected to the KarlBridge.
OCT kbWirelessStationMACAddress	1.3.6.1.4.1.762.2.5.2.1.11	OCTET STRING	read-only	The Ethernet (MAC) address of the remote station's wireless interface that is connected to the KarlBridge.
C32 kbWirelessStationTransmits	1.3.6.1.4.1.762.2.5.2.1.12	Counter32	read-only	The total number of wireless transmissions the KarlBridge has made to the remote station through this interface. This number does not necessarily correspond to the number of Ethernet packets transmitted through this interface (see kbWirelessStationPktTransmits).
C32 kbWirelessStationBadTransmits	1.3.6.1.4.1.762.2.5.2.1.13	Counter32	read-only	The total number of failed wireless transmissions the KarlBridge has made to the remote station through this interface. If a wireless transmission is not received after 10 attempts, this counter is incremented.
C32 kbWirelessStationReTransmits	1.3.6.1.4.1.762.2.5.2.1.14	Counter32	read-only	The total number of wireless re-transmissions the KarlBridge has attempted to the remote station through this interface.
IP kbWirelessStationIPAddress	1.3.6.1.4.1.762.2.5.2.1.15	IpAddress	read-only	The IP address of the remote station, if any.
INT kbWirelessStationType	1.3.6.1.4.1.762.2.5.2.1.16	INTEGER	read-only	The remote station's mode of operation on this radio interface. Possible values are: compatibility-Mode(1) -- IEEE 802.11 mode or legacy Wireless(-I) mode tc-Peer-to-Peer(2) -- TurboCell Peer-to-Peer Station (no base stations, no polling) tc-Base-Station(3) -- TurboCell Base Station tc-Satellite-Station(4) -- TurboCell Satellite Station tc-Polling-Base-Station(5) -- TurboCell Polling Base Station tc-PtP-Controller(6) -- TurboCell Point-to-Point Controller (Single-User Base Station)
INT kbWirelessStationSNR	1.3.6.1.4.1.762.2.5.2.1.17	INTEGER	read-only	The relative Signal-to-Noise Ratio of the wireless connection between the remote station and the KarlBridge.
INT kbWirelessStationState	1.3.6.1.4.1.762.2.5.2.1.18	INTEGER	read-only	The remote station's wireless connection status. The remote station is said to be offline when it appears to cease wireless communication, either because it no longer acknowledges poll packets or no longer sends poll packets
C32 kbWirelessPoll	1.3.6.1.4.1.762.2.5.2.1.19	Counter32	read-only	The number of times the KarlBridge has polled the remote station.
C32 kbWirelessPollData	1.3.6.1.4.1.762.2.5.2.1.20	Counter32	read-only	The number of times the KarlBridge has polled the remote station that the remote station has responded with data, after which the remote station's transmit queue is empty.
C32 kbWirelessPollNoData	1.3.6.1.4.1.762.2.5.2.1.21	Counter32	read-only	The number of times the KarlBridge has polled the remote station that the remote station has not responded with data.
C32 kbWirelessPollMoreData	1.3.6.1.4.1.762.2.5.2.1.22	Counter32	read-only	The number of times the KarlBridge has polled the remote station that the remote station has had more data in its transmit queue than it could transmit in a single poll response.
C32 kbWirelessPollTimeouts	1.3.6.1.4.1.762.2.5.2.1.23	Counter32	read-write	The number of times the KarlBridge has polled the remote station and the remote station has not responded before the timeout period expired.
C32 kbWirelessPollOfflines	1.3.6.1.4.1.762.2.5.2.1.24	Counter32	read-write	The number of times the remote station has gone offline. The value is relevant only when the KarlBridge is in one of the Base Station modes (polling or non-polling).
C32 kbWirelessTestTime	1.3.6.1.4.1.762.2.5.2.1.25	Counter32	read-write	The number of seconds remaining in the wireless link test. This value is read-writable, and is decremented by the device every second until it reaches 0, at which point the test is finished. To stop the test, set this value to 0.
U32 kbWirelessTestInterval	1.3.6.1.4.1.762.2.5.2.1.26	Unsigned32	read-write	The duration (in hundredths of seconds) of the radio link test performed between the KarlBridge and the remote station.
I32 kbWirelessTestPacketSize	1.3.6.1.4.1.762.2.5.2.1.27	Integer32	read-write	The size of the radio link test packets sent between the KarlBridge and the remote station.
C32 kbWirelessTestOurTx	1.3.6.1.4.1.762.2.5.2.1.28	Counter32	read-only	The radio transmit rate of the KarlBridge's radio when performing the radio link test.
C32 kbWirelessTestOurRx	1.3.6.1.4.1.762.2.5.2.1.29	Counter32	read-only	The radio receive rate used by the KarlBridge when performing the radio link test.
C32 kbWirelessTestHisTx	1.3.6.1.4.1.762.2.5.2.1.30	Counter32	read-only	The radio transmit rate of the remote station's radio when performing the radio link test.
C32 kbWirelessTestHisRx	1.3.6.1.4.1.762.2.5.2.1.31	Counter32	read-only	The radio receive rate used by the remote station when performing the radio link test.
G32 kbWirelessTestOurCurSignalLevel	1.3.6.1.4.1.762.2.5.2.1.32	Gauge32	read-only	The current local signal level for the radio link test as recorded by the KarlBridge.
G32 kbWirelessTestOurCurNoiseLevel	1.3.6.1.4.1.762.2.5.2.1.33	Gauge32	read-only	The current local noise level for the radio link test as recorded by the KarlBridge.
G32 kbWirelessTestOurCurSignalQuality	1.3.6.1.4.1.762.2.5.2.1.34	Gauge32	read-only	The current relative signal quality for the radio link test as recorded by the KarlBridge.
G32 kbWirelessTestOurCurSNR	1.3.6.1.4.1.762.2.5.2.1.35	Gauge32	read-only	The current local Signal-to-Noise Ratio (SNR) for the radio link test as recorded by the KarlBridge.
G32 kbWirelessTestOurMinSignalLevel	1.3.6.1.4.1.762.2.5.2.1.36	Gauge32	read-only	The minimum local signal level recorded by the KarlBridge during the radio link test.
G32 kbWirelessTestOurMinNoiseLevel	1.3.6.1.4.1.762.2.5.2.1.37	Gauge32	read-only	The minimum local noise level recorded by the KarlBridge during the radio link test.
G32 kbWirelessTestOurMinSignalQuality	1.3.6.1.4.1.762.2.5.2.1.38	Gauge32	read-only	The minimum local signal quality recorded by the KarlBridge during the radio link test.
G32 kbWirelessTestOurMinSNR	1.3.6.1.4.1.762.2.5.2.1.39	Gauge32	read-only	The minimum local Signal-to-Noise Ratio (SNR) recorded by the KarlBridge during the radio link test.
G32 kbWirelessTestOurMaxSignalLevel	1.3.6.1.4.1.762.2.5.2.1.40	Gauge32	read-only	The maximum local signal level recorded by the KarlBridge during the radio link test.
G32 kbWirelessTestOurMaxNoiseLevel	1.3.6.1.4.1.762.2.5.2.1.41	Gauge32	read-only	The maximum local noise level recorded by the KarlBridge during the radio link test.
G32 kbWirelessTestOurMaxSignalQuality	1.3.6.1.4.1.762.2.5.2.1.42	Gauge32	read-only	The maximum local signal quality recorded by the KarlBridge during the radio link test.
G32 kbWirelessTestOurMaxSNR	1.3.6.1.4.1.762.2.5.2.1.43	Gauge32	read-only	The maximum local Signal-to-Noise Ratio (SNR) recorded by the KarlBridge during the radio link test.
G32 kbWirelessTestHisCurSignalLevel	1.3.6.1.4.1.762.2.5.2.1.44	Gauge32	read-only	The current signal level at the remote station for the radio link test.
G32 kbWirelessTestHisCurNoiseLevel	1.3.6.1.4.1.762.2.5.2.1.45	Gauge32	read-only	The current noise level at the remote station for the radio link test.
G32 kbWirelessTestHisCurSignalQuality	1.3.6.1.4.1.762.2.5.2.1.46	Gauge32	read-only	The current signal quality at the remote station for the radio link test.
G32 kbWirelessTestHisCurSNR	1.3.6.1.4.1.762.2.5.2.1.47	Gauge32	read-only	The current Signal-to-Noise Ratio (SNR) at the remote station for the radio link test.
G32 kbWirelessTestHisMinSignalLevel	1.3.6.1.4.1.762.2.5.2.1.48	Gauge32	read-only	The minimum signal level recorded at the remote station during the radio link test.
G32 kbWirelessTestHisMinNoiseLevel	1.3.6.1.4.1.762.2.5.2.1.49	Gauge32	read-only	The minimum noise level recorded at the remote station during the radio link test.
G32 kbWirelessTestHisMinSignalQuality	1.3.6.1.4.1.762.2.5.2.1.50	Gauge32	read-only	The minimum signal quality recorded at the remote station during the radio link test.
G32 kbWirelessTestHisMinSNR	1.3.6.1.4.1.762.2.5.2.1.51	Gauge32	read-only	The minimum signal level recorded at the remote station during the radio link test.
G32 kbWirelessTestHisMaxSignalLevel	1.3.6.1.4.1.762.2.5.2.1.52	Gauge32	read-only	The maximum signal level recorded at the remote station during the radio link test.
G32 kbWirelessTestHisMaxNoiseLevel	1.3.6.1.4.1.762.2.5.2.1.53	Gauge32	read-only	The maximum remote noise level recorded at the remote station during the radio link test.
G32 kbWirelessTestHisMaxSignalQuality	1.3.6.1.4.1.762.2.5.2.1.54	Gauge32	read-only	The maximum signal quality recorded at the remote station during the radio link test.
G32 kbWirelessTestHisMaxSNR	1.3.6.1.4.1.762.2.5.2.1.55	Gauge32	read-only	The maximum Signal-to-Noise Ratio (SNR) recorded at the remote station during the radio link test.
INT kbWirelessTestLinkUp	1.3.6.1.4.1.762.2.5.2.1.56	INTEGER	read-only	The status of the radio link test. Possible values are: down(0) -- the radio link test IS NOT currently running up(1) -- the radio link test IS currently running
INT kbWirelessTestLostLink	1.3.6.1.4.1.762.2.5.2.1.57	INTEGER	read-only	The number of time this link was lost while performing the radio link test.
INT kbWirelessTestLostTestPkts	1.3.6.1.4.1.762.2.5.2.1.58	INTEGER	read-only	The total number of radio link test packets that were lost during the test interval.
INT kbWirelessStationRadioType	1.3.6.1.4.1.762.2.5.2.1.59	INTEGER	read-only	The type of radio the remote station is using on this interface. Possible values include: waveLAN-I(0) -- legacy Lucent Wireless-I radio (900 MHz) clarion-M10(1) -- Clarion M10 radio waveLAN-IEEE(2) -- Lucent ORiNOCO (WaveLAN) IEEE 802.11 radio (2.4 GHz) microwave(3) -- some type of microwave radio radioLAN(4) -- some type of RadioLAN radio
INT kbWirelessRecordType	1.3.6.1.4.1.762.2.5.2.1.60	INTEGER	read-only	The type of this record entry. Possible values include: linktest(1) -- This record contains ONLY LinkTest results turboCell(2) -- This record contains ONLY a TurboCell station entry combination(3) -- This record contains BOTH LinkTest results AND a TurboCell station entry
C32 kbWirelessStationPktReceives	1.3.6.1.4.1.762.2.5.2.1.61	Counter32	read-only	The number of packets the KarlBridge has received on this link.
C32 kbWirelessStationReceives	1.3.6.1.4.1.762.2.5.2.1.62	Counter32	read-only	The number of wireless transmissions the KarlBridge has received on this link.
C32 kbWirelessStationBytesReceives	1.3.6.1.4.1.762.2.5.2.1.63	Counter32	read-only	The number of bytes received by the KarlBridge on this link, including wireless packet headers.
C32 kbWirelessStationBytesTransmits	1.3.6.1.4.1.762.2.5.2.1.64	Counter32	read-only	The number of bytes transmitted by the KarlBridge on this link, including wireless packet headers.
OCT kbWirelessRegistrationRecord	1.3.6.1.4.1.762.2.5.2.1.65	OCTET STRING	read-only	For testing purposes only.
C32 kbWirelessStationFragmentDiscards	1.3.6.1.4.1.762.2.5.2.1.66	Counter32	read-only	The number of times on this connection that the KarlBridge has discarded a fragment. A fragment is discarded because not all fragments needed to reconstruct a packet are present or we need room for a more recent fragment.
C32 kbWirelessStationFragmentMissings	1.3.6.1.4.1.762.2.5.2.1.67	Counter32	read-only	The number of times on this connection that the KarlBridge has detected that a fragment needed to recontruct a packet is missing.
C32 kbWirelessStationFragmentLostFrames	1.3.6.1.4.1.762.2.5.2.1.68	Counter32	read-only	The number of times on this connection that the KarlBridge detected that a frame containing fragments needed to reconstruct a packet is lost.
C32 kbWirelessStationFragmentErrors	1.3.6.1.4.1.762.2.5.2.1.69	Counter32	read-only	The number of times on this connection the KarlBridge has encountered an error while reconstructing a packet from fragments.
kbSEC	1.3.6.1.4.1.762.2.8
kbSECClientTable	1.3.6.1.4.1.762.2.8.1		not-accessible	A table that contains information about Super Ethernet Converter (SEC) clients and the SEC station through which they are connected.
kbSECClientEntry	1.3.6.1.4.1.762.2.8.1.1		not-accessible	An entry in the kbSECClientTable. Each entry contains the client's MAC address (which is the table index) and the MAC address of the SEC through which the client is connected.
MAC kbSECClientAddress	1.3.6.1.4.1.762.2.8.1.1.1	MacAddress	read-only	The unicast MAC address of the client station that is connecting through the SEC unit denoted by kbSECStationAddress.
MAC kbSECStationAddress	1.3.6.1.4.1.762.2.8.1.1.2	MacAddress	read-only	The unicast MAC address of the SEC station through which the client is connected.
kbClientInfo	1.3.6.1.4.1.762.2.9
kbClientInfoByNumberTable	1.3.6.1.4.1.762.2.9.1		not-accessible	A table that contains information about (wireless) clients that pass traffic through this KarlBridge, indexed by a virtual port number that is unique only within this table.
kbClientInfoByNumberEntry	1.3.6.1.4.1.762.2.9.1.1		not-accessible	An entry in the kbClientInfoByNumberTable. Each entry contains information for a particular client station indexed by the client's virtual port number.
U32 kbCIbyNumberVirtualPort	1.3.6.1.4.1.762.2.9.1.1.1	Unsigned32	read-only	The virtual port number to which the client is connected. Used as the index for this table.
MAC kbCIbyNumberMACAddress	1.3.6.1.4.1.762.2.9.1.1.2	MacAddress	read-only	The client's unique unicast MAC Address. This value can be used as the index in the kbClientInfoByMacTable.
U32 kbCIByNumberInterfaceNum	1.3.6.1.4.1.762.2.9.1.1.3	Unsigned32	read-only	The KarlBridge interface to which the client is connected.
OCT kbCIbyNumberStationName	1.3.6.1.4.1.762.2.9.1.1.4	OCTET STRING	read-only	The client's ASCII Station Name.
C32 kbCIbyNumberTotalBytes	1.3.6.1.4.1.762.2.9.1.1.5	Counter32	read-only	The total number of bytes that have been passed through the KarlBridge for this client (clientTotalBytes = clientSentBytes + clientRecvBytes)
C32 kbCIbyNumberTotalPackets	1.3.6.1.4.1.762.2.9.1.1.6	Counter32	read-only	The total number of packets that have been passed through the KarlBridge for this client (clientTotalPackets = clientSentPackets + clientRecvPackets)
G32 kbCIbyNumberSNRAverage	1.3.6.1.4.1.762.2.9.1.1.7	Gauge32	read-only	The running average of the Signal-to-Noise Ratio (SNR) for this client, if the client is connected directly to the KarlBridge on a wireless interface. 0 otherwise.
C32 kbCIbyNumberTimeLastRecv	1.3.6.1.4.1.762.2.9.1.1.8	Counter32	read-only	The number of time ticks (in 1/100ths of a second) since a packet was last received from this client.
kbClientInfoByMacTable	1.3.6.1.4.1.762.2.9.2		not-accessible	A table that contains information about (wireless) clients that pass traffic through this KarlBridge, indexed by client MAC Address.
kbClientInfoByMacEntry	1.3.6.1.4.1.762.2.9.2.1		not-accessible	An entry in the kbClientInfoByMacTable. Each entry contains information for a particular client station indexed by the client's unique MAC Address.
MAC kbCIbyMacMACAddress	1.3.6.1.4.1.762.2.9.2.1.1	MacAddress	read-only	The client's unique unicast MAC Address. Used as the index for this table.
U32 kbCIbyMacVirtualPort	1.3.6.1.4.1.762.2.9.2.1.2	Unsigned32	read-only	The virtual port number to which the client is connected. This value can be used as the index in the kbClientInfoByNumberTable.
U32 kbCIbyMacInterfaceNum	1.3.6.1.4.1.762.2.9.2.1.3	Unsigned32	read-only	The KarlBridge interface to which the client is connected.
OCT kbCIbyMacStationName	1.3.6.1.4.1.762.2.9.2.1.4	OCTET STRING	read-only	The client's ASCII Station Name.
C32 kbCIbyMacTotalBytes	1.3.6.1.4.1.762.2.9.2.1.5	Counter32	read-only	The total number of bytes that have been passed through the KarlBridge for this client (clientTotalBytes = clientSentBytes + clientRecvBytes)
C32 kbCIbyMacTotalPackets	1.3.6.1.4.1.762.2.9.2.1.6	Counter32	read-only	The total number of packets that have been passed through the KarlBridge for this client (clientTotalPackets = clientSentPackets + clientRecvPackets)
G32 kbCIbyMacSNRAverage	1.3.6.1.4.1.762.2.9.2.1.7	Gauge32	read-only	The running average of the Signal-to-Noise Ratio (SNR) for this client, if the client is connected directly to the KarlBridge on a wireless interface. 0 otherwise.
C32 kbCIbyMacTimeLastRecv	1.3.6.1.4.1.762.2.9.2.1.8	Counter32	read-only	The number of time ticks (in 1/100ths of a second) since a packet was last received from this client.

RFC description

A proprietary bridge management MIB, likely an extension or vendor-specific variant of the standard IEEE 802.1D bridge MIB (RFC 1493/RFC 4188), providing additional SNMP monitoring for bridge switching functions.

Start monitoring KarlNet wireless Ethernet bridge with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download KBRIDGE-MIB

What Is KBRIDGE-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description