AP553-MIB

All MIBs › AP553-MIB

Category: Wireless and WLAN

Description: Aironet/Telco AP553 wireless access point configuration and radio status management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AP553-MIB?

AP553-MIB is a General DataComm (Frame Relay probe/access-product heritage) proprietary MIB configuring Frame Relay LMI (Local Management Interface) probe parameters. Its objects cover MIB version, LMI operation/DLCI/IP-DLCI/IP-encapsulation, channel aggregate rate, LMI type, N391/N392/N393 counters, T391/T392 timers, max info length, unit type, probe mode, poll period, PVC count, probe token size, and PVC add/delete/discovery actions with a configurable operational-state-change trap severity. As a configuration/status MIB it lets an administrator confirm Frame Relay LMI polling parameters and PVC discovery settings on a General DataComm access probe. It is deployed on General DataComm Frame Relay access/probe equipment. Engineers can download the AP553-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in AP553-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General DataComm Frame Relay access/probe equipment

Monitoring Examples

An administrator checks lmiType and t391Timer to confirm the Frame Relay LMI polling configuration matches the carrier's switch on a General DataComm access probe.

What Can Be Monitored

Frame Relay LMI configuration and PVC discovery

Imported Objects

From INNOVX-CORE-MIB

linkProbe

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT alarmCurrentStatusBitsMap	1.3.6.1.4.1.498.22.1.2.4.1.1	INTEGER	read-only	This parameter is a bitmap for the 6 enterprise specific traps. A bit value of one means the trap is active. A bit value of zero means the trap is clear. 1st bit = avgChanLoadToDTE_trap; 2nd bit = realTimeChanLoadToDTE_trap; 3rd bit = avgChanLoadToDCE_trap; 4th bit = realTimeChanLoadToDCE_trap; 5th bit = networkLmiInterfaceDown_trap; 6th bit = userLmiInterfaceDown_trap;
alarmCurrentStatusTable	1.3.6.1.4.1.498.22.1.2.4.1.2		not-accessible	PVC table which lists PVCs and alarm status.
alarmStatus	1.3.6.1.4.1.498.22.1.2.4.1
alarmStatusEntry	1.3.6.1.4.1.498.22.1.2.4.1.2.1		not-accessible	Identifies an entry (row) in PVC alarm status table.
INT alarmStatusTableIndex	1.3.6.1.4.1.498.22.1.2.4.1.2.1.1	INTEGER	read-only	Identifies an entry (row) in the alarm status table.
INT avgChanLoadToDCEThresh	1.3.6.1.4.1.498.22.1.2.1.4.6	INTEGER	read-write	Defines the maximum allowed frame relay channel utilization in a 15 minute period, expressed in percentage. If the actual average utilization is more than this threshold, an avgChanLoadToDCETrap trap may be sent as specified by the avgChanLoadToDCETrapSeverity object value.
INT avgChanLoadToDCETrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.5	INTEGER	read-write	Controls the reporting of and defines severity of the 15 minute average load exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgChanLoadToDTEThresh	1.3.6.1.4.1.498.22.1.2.1.4.10	INTEGER	read-write	Defines the maximum allowed frame relay channel utilization in a 15 minute period, expressed in percentage. If the actual average utilization is more than this threshold, an avgChanLoadToDTETrap trap may be sent as specified by the avgChanLoadToDTETrapSeverity object value.
INT avgChanLoadToDTETrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.9	INTEGER	read-write	Controls the reporting of and defines severity of the 15 minute average load exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcBecnFramesThresh	1.3.6.1.4.1.498.22.1.2.1.4.30	INTEGER	read-write	Defines the maximum allowed number of BECN frames which may be received in a 15 minute period.
INT avgPvcBecnFramesTrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.29	INTEGER	read-write	Controls the reporting of and defines severity of the avgPvcBecnFrames exception trap. This condition may be reported when the avgPvcFecnFramesThresh object value is exceeded within a 15 minute period. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcCIRExceedToDTETrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.31	INTEGER	read-write	Controls the reporting of and defines severity of the avgPvcCIRExceedToDTE exception trap. This trap may be reported if this condition occurs over a 15 minute period. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcEIRExceedToDTETrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.32	INTEGER	read-write	Controls the reporting of and defines severity of the avgPvcEIRExceedToDTE exception trap. This trap may be reported if this condition occurs over a 15 minute period. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcFecnFramesThresh	1.3.6.1.4.1.498.22.1.2.1.4.28	INTEGER	read-write	Defines the maximum allowed number of FECN frames which may be received in a 15 minute period.
INT avgPvcFecnFramesTrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.27	INTEGER	read-write	Controls the reporting of and defines severity of the avgPvcFecnFrames exception trap. This condition may be reported when the avgPvcFecnFramesThresh object value is exceeded within a 15 minute period. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcLoadToDCEThresh	1.3.6.1.4.1.498.22.1.2.1.4.14	INTEGER	read-write	Defines the maximum allowed PVC load in a 15 minute period, expressed in percentage. If the actual average PVC loading is more than this threshold, an avgPvcLoadToDCETrap trap may be sent as specified by the avgPvcLoadToDCETrapSeverity object value.
INT avgPvcLoadToDCETrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.13	INTEGER	read-write	Controls the reporting of and defines severity of the 15 minute average load exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcLoadToDTEThresh	1.3.6.1.4.1.498.22.1.2.1.4.18	INTEGER	read-write	Defines the maximum allowed PVC load in a 15 minute period, expressed in percentage. If the actual average utilization is more than this threshold, an avgPvcLoadToDTETrap trap may be sent as specified by the avgPvcLoadToDTETrapSeverity object value.
INT avgPvcLoadToDTETrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.17	INTEGER	read-write	Controls the reporting of and defines severity of the 15 minute average load exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcLossFrameRxTrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.34	INTEGER	read-write	Controls the reporting of and defines severity of the avgPvcLossFrameTx exception trap. This trap may be reported if this condition occurs over a 15 minute period. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcLossFrameTxTrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.33	INTEGER	read-write	Controls the reporting of and defines severity of the avgPvcLossFrameTx exception trap. This trap may be reported if this condition occurs over a 15 minute period. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcNotAvailToDCEThresh	1.3.6.1.4.1.498.22.1.2.1.4.24	INTEGER	read-write	Defines the maximum allowed average unavailability in a 15 minute period, expressed in percentage. If the actual value is more than this threshold, an avgPvcNotAvailToDCE trap may be sent as specified by the avgPvcNotAvailToDCETrapSeverity object value.
INT avgPvcNotAvailToDCETrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.23	INTEGER	read-write	Controls the reporting of and defines severity of the avgPvcNotAvailToDCE exception trap. This condition may be reported when the avgPvcNotAvailToDCEThresh object value is exceeded within a 15 minute period. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcNotAvailToDTEThresh	1.3.6.1.4.1.498.22.1.2.1.4.26	INTEGER	read-write	Defines the maximum allowed average unavailability in a 15 minute period, expressed in percentage. If the actual value is more than this threshold, an avgPvcNotAvailToDTE trap may be sent as specified by the avgPvcNotAvailToDTETrapSeverity object value.
INT avgPvcNotAvailToDTETrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.25	INTEGER	read-write	Controls the reporting of and defines severity of the avgPvcNotAvailToDTE exception trap. This condition may be reported when the avgPvcNotAvailToDTEThresh object value is exceeded within a 15 minute period. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT avgPvcRoundTripDelayThresh	1.3.6.1.4.1.498.22.1.2.1.4.22	INTEGER	read-write	Defines the maximum allowed PVC round trip delay in a 15 minute period, expressed in percentage. If the actual average PVC round trip delay is more than this threshold, an avgPvcRoundTripDelayTrap trap may be sent as specified by the avgPvcRoundTripDelayTrapSeverity object value.
INT avgPvcRoundTripDelayTrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.21	INTEGER	read-write	Controls the reporting of and defines severity of the 15 minute average round trip delay exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT chanAggregateRate	1.3.6.1.4.1.498.22.1.2.1.1.5	INTEGER	read-only	Displays the current aggregate channel rate.
chanConfig	1.3.6.1.4.1.498.22.1.2.1.1
chanPerfCurr	1.3.6.1.4.1.498.22.1.2.3.1
chanPerfIntvEntry	1.3.6.1.4.1.498.22.1.2.3.2.1		not-accessible	Identifies an entry (row) in probe channel performance table.
chanPerfIntvTable	1.3.6.1.4.1.498.22.1.2.3.2		not-accessible	Probe channel performance table, which displays the performance statistic data based on the probe channel within previous 24 hours.
CTR chCurrBecnFrames	1.3.6.1.4.1.498.22.1.2.2.1.12	Counter	read-only	Identifies total number of frames with BECN set received within current 15 minutes interval.
CTR chCurrDceFrames	1.3.6.1.4.1.498.22.1.2.2.1.2	Counter	read-only	Identifies total frames received from DCE device within current 15 minutes interval.
CTR chCurrDCELmiTimeout	1.3.6.1.4.1.498.22.1.2.2.1.10	Counter	read-only	Identifies the total number of lmi timeouts received within current 15 minutes interval.
CTR chCurrDceOctets	1.3.6.1.4.1.498.22.1.2.2.1.4	Counter	read-only	Identifies total octets received from DTE device within current 15 minutes interval.
CTR chCurrDteFrames	1.3.6.1.4.1.498.22.1.2.2.1.1	Counter	read-only	Identifies total frames received from DTE device within current 15 minutes interval.
CTR chCurrDTELmiTimeout	1.3.6.1.4.1.498.22.1.2.2.1.9	Counter	read-only	Identifies the total number of lmi timeouts received within current 15 minutes interval.
CTR chCurrDteOctets	1.3.6.1.4.1.498.22.1.2.2.1.3	Counter	read-only	Identifies total octets received from DTE device within current 15 minutes interval.
CTR chCurrFecnFrames	1.3.6.1.4.1.498.22.1.2.2.1.11	Counter	read-only	Identifies total number of frames with FECN set received within current 15 minutes interval.
CTR chCurrLmiRxEnq	1.3.6.1.4.1.498.22.1.2.2.1.7	Counter	read-only	Identifies the total number of LMI enquiries from the DTE within current 15 minutes interval.
CTR chCurrLmiRxResp	1.3.6.1.4.1.498.22.1.2.2.1.8	Counter	read-only	Identifies the total number of LMI status responses received from the DCE within current 15 minutes interval.
CTR chCurrLmiTxEnq	1.3.6.1.4.1.498.22.1.2.2.1.5	Counter	read-only	Identifies the total number of LMI enquiries sent to DCE within current 15 minutes interval.
CTR chCurrLmiTxResp	1.3.6.1.4.1.498.22.1.2.2.1.6	Counter	read-only	Identifies the total number of LMI responses sent to DTE within current 15 minutes interval.
CTR chCurrRxIp	1.3.6.1.4.1.498.22.1.2.2.1.14	Counter	read-only	Identifies total number of IP packets received on inband DLCI within current 15 minutes interval.
CTR chCurrRxPoll	1.3.6.1.4.1.498.22.1.2.2.1.17	Counter	read-only	Identifies total number of probe polls received from DCE within current 15 minutes interval.
CTR chCurrRxResp	1.3.6.1.4.1.498.22.1.2.2.1.18	Counter	read-only	Identifies total number of probe responses received from DCE within current 15 minutes interval.
CTR chCurrTxIp	1.3.6.1.4.1.498.22.1.2.2.1.13	Counter	read-only	Identifies total number of IP packets sent on inband DLCI within current 15 minutes interval.
CTR chCurrTxPoll	1.3.6.1.4.1.498.22.1.2.2.1.15	Counter	read-only	Identifies total number of probe polls sent to DCE within current 15 minutes interval.
CTR chCurrTxResp	1.3.6.1.4.1.498.22.1.2.2.1.16	Counter	read-only	Identifies total number of probe responses sent to DCE within current 15 minutes interval.
CTR chIntvBecnFrames	1.3.6.1.4.1.498.22.1.2.2.2.1.13	Counter	read-only	Identifies total number of frames with BECN set received within a 15 minutes interval.
CTR chIntvDceFrames	1.3.6.1.4.1.498.22.1.2.2.2.1.3	Counter	read-only	Identifies total frames received from DCE device within a 15 minutes interval.
CTR chIntvDCELmiTimeout	1.3.6.1.4.1.498.22.1.2.2.2.1.11	Counter	read-only	Identifies the total number of LMI timeouts received within a 15 minutes interval.
CTR chIntvDceOctets	1.3.6.1.4.1.498.22.1.2.2.2.1.5	Counter	read-only	Identifies total octets received from DTE device within a 15 minutes interval.
CTR chIntvDteFrames	1.3.6.1.4.1.498.22.1.2.2.2.1.2	Counter	read-only	Identifies total frames received from DTE device within a 15 minutes interval.
CTR chIntvDTELmiTimeout	1.3.6.1.4.1.498.22.1.2.2.2.1.10	Counter	read-only	Identifies the total number of LMI timeouts received within a 15 minutes interval.
CTR chIntvDteOctets	1.3.6.1.4.1.498.22.1.2.2.2.1.4	Counter	read-only	Identifies total octets received from DTE device within a 15 minutes interval.
CTR chIntvFecnFrames	1.3.6.1.4.1.498.22.1.2.2.2.1.12	Counter	read-only	Identifies total number of frames with FECN set received within a 15 minutes interval.
INT chIntvIndex	1.3.6.1.4.1.498.22.1.2.2.2.1.1	INTEGER	read-only	Identifies an entry (row) in channel statistic table, 1-96 time intervals.
CTR chIntvLmiRxEnq	1.3.6.1.4.1.498.22.1.2.2.2.1.8	Counter	read-only	Identifies the total number of LMI enquiries received within a 15 minutes interval.
CTR chIntvLmiRxResp	1.3.6.1.4.1.498.22.1.2.2.2.1.9	Counter	read-only	Identifies the total number of LMI status responses received from the DCE within a 15 minutes interval.
CTR chIntvLmiTxEnq	1.3.6.1.4.1.498.22.1.2.2.2.1.6	Counter	read-only	Identifies the total number of LMI enquiries sent to DCE within a 15 minutes interval.
CTR chIntvLmiTxResp	1.3.6.1.4.1.498.22.1.2.2.2.1.7	Counter	read-only	Identifies the total number of LMI responses send to DTE within a 15 minutes interval.
CTR chIntvRxIp	1.3.6.1.4.1.498.22.1.2.2.2.1.15	Counter	read-only	Identifies total number of IP packets received on inband DLCI within a 15 minutes interval.
CTR chIntvRxPoll	1.3.6.1.4.1.498.22.1.2.2.2.1.18	Counter	read-only	Identifies total number of probe polls received from DCE within a 15 minutes interval.
CTR chIntvRxResp	1.3.6.1.4.1.498.22.1.2.2.2.1.19	Counter	read-only	Identifies total number of probe responses received from DCE within a 15 minutes interval.
CTR chIntvTxIp	1.3.6.1.4.1.498.22.1.2.2.2.1.14	Counter	read-only	Identifies total number of IP packets sent on inband DLCI within a 15 minutes interval.
CTR chIntvTxPoll	1.3.6.1.4.1.498.22.1.2.2.2.1.16	Counter	read-only	Identifies total number of probe polls sent to DCE within a 15 minutes interval.
CTR chIntvTxResp	1.3.6.1.4.1.498.22.1.2.2.2.1.17	Counter	read-only	Identifies total number of probe response sent to DCE within a 15 minutes interval.
INT chPerfCurrLoadToDceRealTime	1.3.6.1.4.1.498.22.1.2.3.1.7	INTEGER	read-only	This object displays the channel load tx within current TC ( 1 sec.), this variable is calculated by total octets transmitted over the capacity of this channel.
INT chPerfCurrLoadToDteRealTime	1.3.6.1.4.1.498.22.1.2.3.1.8	INTEGER	read-only	This object displays the channel load rx within current TC ( 1 sec.), this variable is calculated by total octets received over the capacity of this channel.
INT chPerfCurrRxLoad	1.3.6.1.4.1.498.22.1.2.3.1.4	INTEGER	read-only	Channel average user rx load within the latest 15 minutes, this statistic datum is calculated by user data octets received by the channel within the 15 minutes over the total channel available load ( which depends on physical interface speed).
INT chPerfCurrTotalRxLoad	1.3.6.1.4.1.498.22.1.2.3.1.6	INTEGER	read-only	channel total rx load within the latest 15 minutes, this statistic datum is calculated by total data octets received by the channel within the 15 minutes over the channel total available load ( which depends on physical interface speed).
INT chPerfCurrTotalTxLoad	1.3.6.1.4.1.498.22.1.2.3.1.5	INTEGER	read-only	channel total tx load within the latest 15 minutes, this statistic datum is calculated by the total data octets sent by the channel within the 15 minutes over the channel available load ( which depends on physical interface speed).
INT chPerfCurrTxLoad	1.3.6.1.4.1.498.22.1.2.3.1.3	INTEGER	read-only	channel average user tx load within the latest 15 minutes, this statistic datum is calculated by user data octets sent by the channel within the 15 minutes over the total channel available load ( which depends on physical interface speed).
INT chPerfCurrUnavailToDce	1.3.6.1.4.1.498.22.1.2.3.1.2	INTEGER	read-only	This object identifies the channel unavailability due to local DTE fault within the latest 15 minutes. This statistic datum is calculated by the channel unavailable time over the full time interval.
INT chPerfCurrUnavailToDte	1.3.6.1.4.1.498.22.1.2.3.1.1	INTEGER	read-only	This object identifies the channel unavailability due to remote DTE fault within the latest 15 minutes. This statistic datum is calculated by the channel unavailable time over the full time interval.
INT chPerfIntvIndex	1.3.6.1.4.1.498.22.1.2.3.2.1.1	INTEGER	read-only	Identifies an entry (row) in historical PVC performance table, total 96 time intervals, where 1 is the most recently completed 15 minutes interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).
INT chPerfIntvRxLoad	1.3.6.1.4.1.498.22.1.2.3.2.1.5	INTEGER	read-only	channel average user rx load within a 15 minutes interval, this statistic datum is calculated by user data octets received by the channel within the 15 minutes over the total channel available load( which depends on physical interface speed).
INT chPerfIntvTotalRxLoad	1.3.6.1.4.1.498.22.1.2.3.2.1.7	INTEGER	read-only	Channel total rx load within a 15 minutes interval, this statistic datum is calculated by the total data octets received by the channel within the 15 minutes over the total channel available load ( which depends on physical interface speed).
INT chPerfIntvTotalTxLoad	1.3.6.1.4.1.498.22.1.2.3.2.1.6	INTEGER	read-only	channel total tx load within a 15 minutes interval, this statistic datum is calculated by the total data octets sent by the channel within the 15 minutes over the total channel available load ( which depends on physical interface speed).
INT chPerfIntvTxLoad	1.3.6.1.4.1.498.22.1.2.3.2.1.4	INTEGER	read-only	channel average user tx load within a 15 minutes interval,this statistic datum is calculated by user data octets sent by the channel within the 15 minutes over the total channel available load ( which depends on physical interface speed).
INT chPerfIntvUnavailToDce	1.3.6.1.4.1.498.22.1.2.3.2.1.3	INTEGER	read-only	This object identifies the channel unavailability due to local DTE fault within a 15 minutes interval. This statistic datum is calculated by the channel unavailable time over the full time interval.
INT chPerfIntvUnavailToDte	1.3.6.1.4.1.498.22.1.2.3.2.1.2	INTEGER	read-only	This object identifies the channel unavailability due to remote DTE fault within a 15 minutes interval. This statistic datum is calculated by the channel unavailable time over the full time interval.
chStCurrent	1.3.6.1.4.1.498.22.1.2.2.1
chStIntervalEntry	1.3.6.1.4.1.498.22.1.2.2.2.1		not-accessible	Identifies an entry (row) in probe statistic table.
chStIntervalTable	1.3.6.1.4.1.498.22.1.2.2.2		not-accessible	probe statistic table, row 1 to row 96, which defines the time interval for every 15 minutes.
INT currentStatusBitsMap	1.3.6.1.4.1.498.22.1.2.4.1.2.1.2	INTEGER	read-only	This parameter is a bitmap for the 14 enterprise specific traps. A bit value of one means the trap is active. A bit value of zero means the trap is clear. 1st bit = avgPvcNotAvailToDCE_trap; 2nd bit = avgPvcNotAvailToDTE_trap; 3rd bit = avgPvcRoundTripDelay_trap; 4th bit = realTimePvcRoundTripDelay_trap; 5th bit = avgPvcBecnFrames_trap; 6th bit = avgPvcFecnFrames_trap; 7th bit = avgPvcLoadToDTE_trap; 8th bit = realTimePvcLoadToDTE_trap; 9th bit = avgPvcLoadToDCE_trap; 10th bit = realTimePvcLoadToDCE_trap; 11th bit = avgPvcCIRExceedToDTE_trap; 12th bit = avgPvcEIRExceedToDTE_trap; 13th bit = avgPvcLossFrameTx_trap; 14th bit = avgPvcLossFrameRx_trap;
STR frProbeMIBversion	1.3.6.1.4.1.498.22.1.2.1.6.1	DisplayString	read-write	Identifies the version of the MIB as 'X.YZT' where: X: Major Revision (1-9) Y: Minor Revision (0-9) Z: Typographical Revision (0-9) T: Test Revision (A-Z)
INT globalTC	1.3.6.1.4.1.498.22.1.2.1.3.4	INTEGER	read-only	This parameter defines the committed rate measurement time interval (in seconds) which can be calculated as Bc/CIR, currently we only allow this value to be 1 sec.
INT intervalComplete	1.3.6.1.4.1.498.22.1.2.2.1.19	INTEGER	read-only	This object identifies the the percent completeion of the interval.
INT ipDLCI	1.3.6.1.4.1.498.22.1.2.1.1.3	INTEGER	read-write	Valid Inband IP DLCI ranges from 16 to 991
INT ipEncapp	1.3.6.1.4.1.498.22.1.2.1.1.4	INTEGER	read-write	Defines the IP DLCI Encapsulation method WEBFLAG RAW IETF SNAP WEBEND
lmiConfig	1.3.6.1.4.1.498.22.1.2.1.2
INT lmiDLCI	1.3.6.1.4.1.498.22.1.2.1.1.2	INTEGER	read-write	The DLCI # used for LMI polls, the default value is dlci-0 WEBFLAG DLCI-0 WEBEND
INT lmiN391	1.3.6.1.4.1.498.22.1.2.1.2.2	INTEGER	read-write	N391 Full Enquiry Interval Counter ranges from 1 to 255, the default value is 6.
INT lmiNet392	1.3.6.1.4.1.498.22.1.2.1.2.3	INTEGER	read-write	N392 Network Interface Down Threshold Counter ranges from 1 to 10, the default value is 3.
INT lmiNet393	1.3.6.1.4.1.498.22.1.2.1.2.5	INTEGER	read-write	N393 Network Interface Down Window Counter ranges from 1 to 10, the default value is 4.
INT lmiOperation	1.3.6.1.4.1.498.22.1.2.1.1.1	INTEGER	read-write	LMI operation, on -- enabled, off -- disabled WEBFLAG Off On WEBEND
INT lmiType	1.3.6.1.4.1.498.22.1.2.1.2.1	INTEGER	read-write	Defines the network's LMI type. WEBFLAG Annex-A Annex-D WEBEND
INT lmiUser392	1.3.6.1.4.1.498.22.1.2.1.2.4	INTEGER	read-write	N392 User Interface Down Threshold Counter ranges from 1 to 10, the default value is 3.
INT lmiUser393	1.3.6.1.4.1.498.22.1.2.1.2.6	INTEGER	read-write	N393 User Interface Down Window Counter ranges from 1 to 10, the default value is 4.
INT maxInfoLength	1.3.6.1.4.1.498.22.1.2.1.2.9	INTEGER	read-write	Maximum supported frame information length ranges from 400 to 4000, the default value is 4000.
INT networkLmiInterfaceDownTrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.35	INTEGER	read-write	Controls the reporting of and defines severity of the networkLmiInterfaceDown exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT pollPeriod	1.3.6.1.4.1.498.22.1.2.1.3.3	INTEGER	read-only	Defines the frequency of sending the polling frame by the link probe, from 1 to 60 seconds. pollPeriod applies to all PVCs that are probed.
probeConfig	1.3.6.1.4.1.498.22.1.2.1
INT probeMode	1.3.6.1.4.1.498.22.1.2.1.3.2	INTEGER	read-write	Defines the probe mode as a generator, responder, or both or disabled. WEBFLAG Generator Responder Generator & Responder Disabled WEBEND
probePerform	1.3.6.1.4.1.498.22.1.2.3
probeStat	1.3.6.1.4.1.498.22.1.2.2
INT probeTokenSize	1.3.6.1.4.1.498.22.1.2.1.3.6	INTEGER	read-only	Defines the probe token size.
probeVersion	1.3.6.1.4.1.498.22.1.2.1.6
proFunConfig	1.3.6.1.4.1.498.22.1.2.1.3
INT pvcAdd	1.3.6.1.4.1.498.22.1.2.1.3.7	INTEGER	write-only	This object allows for manual addition of a PVC to the existing PVC table, the added PVC must not exist before it is added.
pvcCirEirEntry	1.3.6.1.4.1.498.22.1.2.1.5.1.1		not-accessible	Identifies an entry (row) in PVC CIR/EIR table.
pvcCirEirTable	1.3.6.1.4.1.498.22.1.2.1.5.1		not-accessible	PVC table, which lists PVCs for which the statistic data are collected.
INT pvcCirEirTableIndex	1.3.6.1.4.1.498.22.1.2.1.5.1.1.1	INTEGER	read-only	Identifies an entry (row) in PVC table.
INT pvcCirToDCE	1.3.6.1.4.1.498.22.1.2.1.5.1.1.3	INTEGER	read-write	Defines the committed information rate, in bps, under normal conditions in the direction of to DCE.
INT pvcCirToDTE	1.3.6.1.4.1.498.22.1.2.1.5.1.1.2	INTEGER	read-write	Defines the committed information rate, in bps, under normal conditions in the direction of to DTE.
pvcConfig	1.3.6.1.4.1.498.22.1.2.1.5
INT pvcCount	1.3.6.1.4.1.498.22.1.2.1.3.5	INTEGER	read-only	PVC count defines the total number of PVCs which are being probed. The value is between 1 to 127.
CTR pvcCurrBecnFrames	1.3.6.1.4.1.498.22.1.2.2.3.1.9	Counter	read-only	Identifies total number of frames for a specific PVC with BECN set received within current 15 minutes interval.
CTR pvcCurrDceFrames	1.3.6.1.4.1.498.22.1.2.2.3.1.3	Counter	read-only	Identifies total frames received from DCE device for a specific PVC within current 15 minutes interval.
CTR pvcCurrDceFramesWithDE	1.3.6.1.4.1.498.22.1.2.2.3.1.7	Counter	read-only	Identifies total frames with DE bit set received from DCE device for a specific PVC within current 15 minutes interval.
CTR pvcCurrDceOctets	1.3.6.1.4.1.498.22.1.2.2.3.1.5	Counter	read-only	Identifies total octets received from DTE device for a specific PVC within current 15 minutes interval.
INT pvcCurrDlciIndex	1.3.6.1.4.1.498.22.1.2.2.3.1.1	INTEGER	read-only	Index in PVC statistics table, which identifies the PVC number, up to 20 PVCs can exist.
CTR pvcCurrDteFrames	1.3.6.1.4.1.498.22.1.2.2.3.1.2	Counter	read-only	Identifies total frames received from DTE device for a specific PVC within current 15 minutes interval.
CTR pvcCurrDteFramesWithDE	1.3.6.1.4.1.498.22.1.2.2.3.1.6	Counter	read-only	Identifies total frames with DE bit set received from DTE device for a specific PVC within current 15 minutes interval.
CTR pvcCurrDteOctets	1.3.6.1.4.1.498.22.1.2.2.3.1.4	Counter	read-only	Identifies total octets received from DTE device for a specific PVC within current 15 minutes interval.
CTR pvcCurrFecnFrames	1.3.6.1.4.1.498.22.1.2.2.3.1.8	Counter	read-only	Identifies total number of frames for a specific PVC with FECN set received within current 15 minutes interval.
INT pvcCurrLoopback	1.3.6.1.4.1.498.22.1.2.2.3.1.14	INTEGER	read-only	Identifies whether the specific PVC has been found to be in a loop back state by link probe's generator process.
CTR pvcCurrRxPoll	1.3.6.1.4.1.498.22.1.2.2.3.1.12	Counter	read-only	Identifies total number of probe polls received from DCE on a specific PVC within current 15 minutes interval.
CTR pvcCurrRxResp	1.3.6.1.4.1.498.22.1.2.2.3.1.13	Counter	read-only	Identifies total number of probe responses received from DCE on a specific PVC within current 15 minutes interval.
CTR pvcCurrTxPoll	1.3.6.1.4.1.498.22.1.2.2.3.1.10	Counter	read-only	Identifies total number of probe polls sent to DCE within current 15 minutes interval.
CTR pvcCurrTxResp	1.3.6.1.4.1.498.22.1.2.2.3.1.11	Counter	read-only	Identifies total number of probe responses sent to DCE within current 15 minutes interval.
INT pvcDelete	1.3.6.1.4.1.498.22.1.2.1.3.8	INTEGER	write-only	This object allows for manual deletion of a PVC from the existing PVC table, the deleted PVC must exist before it was deleted.
INT pvcDiscovery	1.3.6.1.4.1.498.22.1.2.1.3.9	INTEGER	read-write	This object automatically adds PVCs as seen by the LMI protocol. It controls the probe ability to read all pvcs as reported by the LMI process and update the probe pvc data table as controlled by the pvcCirEirTable. Values of 2 and 3 cannot be set and have no affect.
INT pvcEirToDCE	1.3.6.1.4.1.498.22.1.2.1.5.1.1.5	INTEGER	read-write	Defines the maximum transfer information rate, in bps, which the network is accepting in the direction of to DCE.
INT pvcEirToDTE	1.3.6.1.4.1.498.22.1.2.1.5.1.1.4	INTEGER	read-write	Defines the maximum transfer information rate, in bps, which the network is accepting in the direction of to DTE.
STR pvcIdentifier	1.3.6.1.4.1.498.22.1.2.1.5.1.1.8	DisplayString	read-write	Comment field for annotation.
CTR pvcIntvBecnFrames	1.3.6.1.4.1.498.22.1.2.2.4.1.10	Counter	read-only	Identifies total number of frames for a specific PVC with BECN set received within a 15 minutes interval.
CTR pvcIntvDceFrames	1.3.6.1.4.1.498.22.1.2.2.4.1.4	Counter	read-only	Identifies total frames received from DCE device for a specific PVC within a 15 minutes interval.
CTR pvcIntvDceFramesWithDE	1.3.6.1.4.1.498.22.1.2.2.4.1.8	Counter	read-only	Identifies the frames with DE bit set received from DCE device for a specific PVC within a 15 minutes interval.
CTR pvcIntvDceOctets	1.3.6.1.4.1.498.22.1.2.2.4.1.6	Counter	read-only	Identifies total octets received from DCE device for a specific PVC within a 15 minutes interval.
INT pvcIntvDlciIndex	1.3.6.1.4.1.498.22.1.2.2.4.1.1	INTEGER	read-only	This index value which uniquely identifies the PVC number to which this entry is applicable.
CTR pvcIntvDteFrames	1.3.6.1.4.1.498.22.1.2.2.4.1.3	Counter	read-only	Identifies total frames received from DTE device for a specific PVC within a 15 minutes interval.
CTR pvcIntvDteFramesWithDE	1.3.6.1.4.1.498.22.1.2.2.4.1.7	Counter	read-only	Identifies the frames with DE bit set received from DTE device for a specific PVC within a 15 minutes interval.
CTR pvcIntvDteOctets	1.3.6.1.4.1.498.22.1.2.2.4.1.5	Counter	read-only	Identifies total octets received from DTE device for a specific PVC within a 15 minutes interval.
CTR pvcIntvFecnFrames	1.3.6.1.4.1.498.22.1.2.2.4.1.9	Counter	read-only	Identifies total number of frames for a specific PVC with FECN set received within a 15 minutes interval.
INT pvcIntvIndex	1.3.6.1.4.1.498.22.1.2.2.4.1.2	INTEGER	read-only	A number between 1 and 96, where 1 is the most recently completed 15 minutes interval and 96 is the least recently completed 15 minutes interval.
INT pvcIntvLoopback	1.3.6.1.4.1.498.22.1.2.2.4.1.15	INTEGER	read-only	Identifies whether the specific PVC has been found to be in a loop back state by link probe's generator process.
CTR pvcIntvRxPoll	1.3.6.1.4.1.498.22.1.2.2.4.1.13	Counter	read-only	Identifies total number of probe polls received from DCE on a specific PVC within a 15 minutes interval.
CTR pvcIntvRxResp	1.3.6.1.4.1.498.22.1.2.2.4.1.14	Counter	read-only	Identifies total number of probe responses received from DCE on a specific PVC within a 15 minutes interval.
CTR pvcIntvTxPoll	1.3.6.1.4.1.498.22.1.2.2.4.1.11	Counter	read-only	Identifies total number of probe polls sent to DCE within a 15 minutes interval.
CTR pvcIntvTxResp	1.3.6.1.4.1.498.22.1.2.2.4.1.12	Counter	read-only	Identifies total number of probe responses sent to DCE within a 15 minutes interval.
INT pvcOperation	1.3.6.1.4.1.498.22.1.2.1.5.1.1.6	INTEGER	read-write	Defines the monitored state of a PVC. pvcNotProbed - specifies that the PVC will not be probed, round trip delay and frame loss measurements will not be tabulated. pvcWaitForProbe specifies that this PVC is in a transition state, and will be probed at the start of the next 15 minute poll cycle for statistic data collection. pvcProbed is a read only value that indicates this PVC is used for both statistic data and probing. WEBFLAG Not Probed Probe Pending Probed WEBEND
INT pvcOperStateChangeTrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.1	INTEGER	read-write	Controls the reporting of and defines the severity of the pvc state change trap which may be sent when a PVC's operational status is changed via the pvcOperation object. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT pvcPerfCurrCirToNetExceed	1.3.6.1.4.1.498.22.1.2.3.3.1.9	INTEGER	read-only	This object identifies the number of exceeding CIR times that the network detected within the current interval. The measurement is done for every Tc, and the direction is to the network.
INT pvcPerfCurrDlciIndex	1.3.6.1.4.1.498.22.1.2.3.3.1.1	INTEGER	read-only	This index value which uniquely identifies the PVC number to which this entry is applicable.
INT pvcPerfCurrEirToNetExceed	1.3.6.1.4.1.498.22.1.2.3.3.1.10	INTEGER	read-only	This object identifies the number of exceeding EIR times that the network detected within the current interval. The measurement is done for every Tc, and the direction is to the network.
pvcPerfCurrEntry	1.3.6.1.4.1.498.22.1.2.3.3.1		not-accessible	Identifies an entry (row) in pvc statistic table
INT pvcPerfCurrRtd	1.3.6.1.4.1.498.22.1.2.3.3.1.2	INTEGER	read-only	Probe token average round trip time within the latest 15 minutes for a specific PVC.
INT pvcPerfCurrRxFrameLoss	1.3.6.1.4.1.498.22.1.2.3.3.1.12	INTEGER	read-only	This object identifies the percentage of rx loss of frames within the total rx frames for this PVC.
INT pvcPerfCurrRxLoad	1.3.6.1.4.1.498.22.1.2.3.3.1.6	INTEGER	read-only	This object identifies the PVC average user rx load within the latest 15 minutes. This statistic datum is calculated by user data octets received by a specific PVC within the 15 minutes over the PVC total available load. If the CIR is correctly defined for this PVC, PVC available load will depend on CIR, otherwise, it will get from interface speed.
pvcPerfCurrTable	1.3.6.1.4.1.498.22.1.2.3.3		not-accessible	PVC performance table, which displays the performance statistic data based on each PVC.
INT pvcPerfCurrTotalRxLoad	1.3.6.1.4.1.498.22.1.2.3.3.1.8	INTEGER	read-only	This object identifies the PVC total rx load within the latest 15 minutes. This statistic datum is calculated by total data octets received by a specific PVC within the 15 minutes over the PVC total available load. If the CIR is correctly defined for this PVC, PVC available load will depend on CIR, otherwise, it will get from interface speed.
INT pvcPerfCurrTotalTxLoad	1.3.6.1.4.1.498.22.1.2.3.3.1.7	INTEGER	read-only	This object identifies the PVC total tx load within the latest 15 minutes. This statistic datum is calculated by total data octets sent by a specific PVC within the 15 minutes over the PVC total available load. If the CIR is correctly defined for this PVC, PVC available load will depend on CIR, otherwise, it will get from interface speed.
INT pvcPerfCurrTxFrameLoss	1.3.6.1.4.1.498.22.1.2.3.3.1.11	INTEGER	read-only	This object identifies the percentage of tx loss of frames within the total tx frames for this PVC.
INT pvcPerfCurrTxLoad	1.3.6.1.4.1.498.22.1.2.3.3.1.5	INTEGER	read-only	This object identifies the PVC average user tx load within the latest 15 minutes. This statistic datum is calculated by user data octets sent by a specific PVC within the 15 minutes over the PVC total available load. If the CIR is correctly defined for this PVC, PVC available load will depend on CIR, otherwise, it will get from interface speed.
INT pvcPerfCurrUnavailToDce	1.3.6.1.4.1.498.22.1.2.3.3.1.4	INTEGER	read-only	This object identifies the PVC average unavailability within the latest 15 minutes. This statistic datum is calculated by a PVC unavailable time due to the local DTE fault over the full time interval.
INT pvcPerfCurrUnavailToDte	1.3.6.1.4.1.498.22.1.2.3.3.1.3	INTEGER	read-only	This object identifies the PVC average unavailability within the latest 15 minutes. This statistic datum is calculated by a PVC unavailable time due to the network or remote DTE fault over the full time interval.
INT pvcPerfIntvCirToNetExceed	1.3.6.1.4.1.498.22.1.2.3.4.1.10	INTEGER	read-only	This object identifies the number of exceeding CIR times that the network detected within an interval. The measurement is done for every Tc, and the direction is to the network.
INT pvcPerfIntvDlciIndex	1.3.6.1.4.1.498.22.1.2.3.4.1.1	INTEGER	read-only	This index value which uniquely identifies the PVC number to which this entry is applicable.
INT pvcPerfIntvEirToNetExceed	1.3.6.1.4.1.498.22.1.2.3.4.1.11	INTEGER	read-only	This object identifies the number of exceeding EIR times that the network detected within an interval. The measurement is done for every Tc, and the direction is to the network.
pvcPerfIntvEntry	1.3.6.1.4.1.498.22.1.2.3.4.1		not-accessible	Identifies an entry (row) in pvc statistic table
INT pvcPerfIntvIndex	1.3.6.1.4.1.498.22.1.2.3.4.1.2	INTEGER	read-only	Identifies an entry (row) in historical PVC performance table,total 96 time intervals, where 1 is the most recently completed 15 minutes interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).
INT pvcPerfIntvRtd	1.3.6.1.4.1.498.22.1.2.3.4.1.3	INTEGER	read-only	Probe token average round trip time within a 15 minutes interval for a specific PVC.
INT pvcPerfIntvRxFrameLoss	1.3.6.1.4.1.498.22.1.2.3.4.1.13	INTEGER	read-only	This object identifies the percentage of rx loss of frames within the total rx frames for this PVC in this interval.
INT pvcPerfIntvRxLoad	1.3.6.1.4.1.498.22.1.2.3.4.1.7	INTEGER	read-only	This object identifies the PVC average user rx load within a 15 minutes interval. This statistic datum is calculated by user data octets received by a specific PVC within the 15 minutes over the PVC total available load. If the CIR is correctly defined for this PVC, PVC available load will depend on CIR, otherwise, it will get from interface speed.
pvcPerfIntvTable	1.3.6.1.4.1.498.22.1.2.3.4		not-accessible	PVC performance interval table, which displays the performance statistic data based on each PVC in previous 24 hours.
INT pvcPerfIntvTotalRxLoad	1.3.6.1.4.1.498.22.1.2.3.4.1.9	INTEGER	read-only	This object identifies the PVC total rx load within a 15 minutes interval. This statistic datum is calculated by total data octets received by a specific PVC within the 15 minutes over the PVC total available load. If the CIR is correctly defined for this PVC, PVC available load will depend on CIR, otherwise, it will get from interface speed.
INT pvcPerfIntvTotalTxLoad	1.3.6.1.4.1.498.22.1.2.3.4.1.8	INTEGER	read-only	This object identifies the PVC total tx load within a 15 minutes interval. This statistic datum is calculated by total data octets sent by a specific PVC within the 15 minutes over the PVC total available load. If the CIR is correctly defined for this PVC, PVC available load will depend on CIR, otherwise, it will get from interface speed.
INT pvcPerfIntvTxFrameLoss	1.3.6.1.4.1.498.22.1.2.3.4.1.12	INTEGER	read-only	This object identifies the percentage of tx loss of frames within the total tx frames for this PVC in this interval.
INT pvcPerfIntvTxLoad	1.3.6.1.4.1.498.22.1.2.3.4.1.6	INTEGER	read-only	This object identifies the PVC average user tx load within a 15 minutes interval. This statistic datum is calculated by user data octets sent by a specific PVC within the 15 minutes over the PVC total available load. If the CIR is correctly defined for this PVC, PVC available load will depend on CIR, otherwise, it will get from interface speed.
INT pvcPerfIntvUnavailToDce	1.3.6.1.4.1.498.22.1.2.3.4.1.5	INTEGER	read-only	This object identifies the PVC average unavailability within a 15 minutes. This statistic datum is calculated by a PVC unavailable time due to the local DTE fault over the full time interval.
INT pvcPerfIntvUnavailToDte	1.3.6.1.4.1.498.22.1.2.3.4.1.4	INTEGER	read-only	This object identifies the PVC average unavailability within a 15 minutes. This statistic datum is calculated by a PVC unavailable time due to the network or remote DTE fault over the full time interval.
INT pvcPerfRealTimeDlciIndex	1.3.6.1.4.1.498.22.1.2.3.5.1.1	INTEGER	read-only	This index value which uniquely identifies the PVC number to which this entry is applicable.
pvcPerfRealTimeEntry	1.3.6.1.4.1.498.22.1.2.3.5.1		not-accessible	Identifies an entry (row) in pvc statistic table
INT pvcPerfRealTimeLoadToDCE	1.3.6.1.4.1.498.22.1.2.3.5.1.3	INTEGER	read-only	This object displays the PVC load to DCE within current TC ( 1 sec.), this variable is calculated by total octets transmitted to DTE over the CIR of this PVC.
INT pvcPerfRealTimeLoadToDTE	1.3.6.1.4.1.498.22.1.2.3.5.1.4	INTEGER	read-only	This object displays the PVC load to DTE within current TC ( 1 sec.), this variable is calculated by total octets transmitted to DCE over the CIR of this PVC.
INT pvcPerfRealTimeRtd	1.3.6.1.4.1.498.22.1.2.3.5.1.2	INTEGER	read-only	Probe token real time round trip delay in msec. for a PVC, it is calculated every Probe Poll interval (1 to 60 sec.).
pvcPerfRealTimeTable	1.3.6.1.4.1.498.22.1.2.3.5		not-accessible	PVC performance table, which displays the performance statistic data based on each PVC.
INT pvcState	1.3.6.1.4.1.498.22.1.2.1.5.1.1.7	INTEGER	read-only	Reflects the state of the PVC as seen by the probe. `unavailable' indicates that the PVC is not included in the DLCI list. `inactive indicates that the PVC is no longer responding. `active' indicates that the PVC is in operational state.
pvcStCurrentEntry	1.3.6.1.4.1.498.22.1.2.2.3.1		not-accessible	Identifies an entry (row) in PVC statistic table
pvcStCurrentTable	1.3.6.1.4.1.498.22.1.2.2.3		not-accessible	PVC statistic table.
pvcStIntervalEntry	1.3.6.1.4.1.498.22.1.2.2.4.1		not-accessible	Identifies an entry (row) in pvc statistic table
pvcStIntervalTable	1.3.6.1.4.1.498.22.1.2.2.4		not-accessible	PVC statistic interval table:
INT realTimeChanLoadToDCEThresh	1.3.6.1.4.1.498.22.1.2.1.4.3	INTEGER	read-write	Defines the maximum allowed real-time channel load calculated every second, expressed in percentage. If the actual load is more than this threshold, a realTimeTrapSeverity exception trap may be sent as specified by the realTimeTrapSeverity object value.
INT realTimeChanLoadToDCEThreshVar	1.3.6.1.4.1.498.22.1.2.1.4.4	INTEGER	read-write	Defines the variation range for real-time channel load, expressed in percentage.. If within the current TC interval, the variation of the actual utilization is more than that range compared with the previous trap value, another realTimeTrapSeverity exception trap may be sent as specified by the realTimeTrapSeverity object value.
INT realTimeChanLoadToDTEThresh	1.3.6.1.4.1.498.22.1.2.1.4.7	INTEGER	read-write	Defines the maximum allowed real-time channel load calculated every second, expressed in percentage. If the actual load is more than this threshold, a realTimeTrapSeverity exception trap may be sent as specified by the realTimeTrapSeverity object value.
INT realTimeChanLoadToDTEThreshVar	1.3.6.1.4.1.498.22.1.2.1.4.8	INTEGER	read-write	Defines the variation range for real-time channel load, expressed in percentage.. If within the current TC interval, the variation of the actual utilization is more than that range compared with the previous trap value, another realTimeTrapSeverity exception trap may be sent as specified by the realTimeTrapSeverity object value.
INT realTimePvcLoadToDCEThresh	1.3.6.1.4.1.498.22.1.2.1.4.11	INTEGER	read-write	Defines the maximum allowed real-time PVC load calculated every second, expressed in percentage. If the actual load is more than this threshold, a realTimeTrapSeverity exception trap may be sent as specified by the realTimeTrapSeverity object value.
INT realTimePvcLoadToDCEThreshVar	1.3.6.1.4.1.498.22.1.2.1.4.12	INTEGER	read-write	Defines the variation range for real-time PVC load, expressed in percentage.. If within the current TC interval, the variation of the actual utilization is more than that range compared with the previous trap value, another realTimeTrapSeverity exception trap may be sent as specified by the realTimeTrapSeverity object value.
INT realTimePvcLoadToDTEThresh	1.3.6.1.4.1.498.22.1.2.1.4.15	INTEGER	read-write	Defines the maximum allowed real-time PVC load calculated every second, expressed in percentage. If the actual load is more than this threshold, a realTimeTrapSeverity exception trap may be sent as specified by the realTimeTrapSeverity object value.
INT realTimePvcLoadToDTEThreshVar	1.3.6.1.4.1.498.22.1.2.1.4.16	INTEGER	read-write	Defines the variation range for real-time PVC load, expressed in percentage. If within the current TC interval, the variation of the actual utilization is more than that range compared with the previous trap value, another realTimeTrapSeverity exception trap may be sent as specified by the realTimeTrapSeverity object value.
INT realTimePvcRoundTripDelayThresh	1.3.6.1.4.1.498.22.1.2.1.4.19	INTEGER	read-write	Defines the maximum allowed real-time PVC round trip delay, calculated every second, expressed in percentage. If the actual load is more than this threshold, a realTimeTrapSeverity exception trap may be sent as specified by the realTimeTrapSeverity object value.
INT realTimePvcRoundTripDelayThreshVar	1.3.6.1.4.1.498.22.1.2.1.4.20	INTEGER	read-write	Defines the variation range for real-time PVC round trip delay, expressed in percentage.. If within the current TC interval, the variation of the actual round trip delay is more than that range compared with the previous trap value, another realTimeTrapSeverity exception trap may be sent as specified by the realTimeTrapSeverity object value.
INT realTimeTrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.2	INTEGER	read-write	Controls the reporting of and defines the severity of ALL real time alarm conditions: Channel Load To DTE, Channel Load TO DCE, PVC Load To DCE, PVC Load To DTE, and PVC Round Trip Delay. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND
INT t391Timer	1.3.6.1.4.1.498.22.1.2.1.2.7	INTEGER	read-write	T391 Status Poll Interval Timer ranges from 5 to 30, the default value is 10, which would always less than to T392 Timer.
INT t392Timer	1.3.6.1.4.1.498.22.1.2.1.2.8	INTEGER	read-write	T392 Polling Verification Interval Timer ranges from 5 to 30, the default value is 15 should always be greater than T391 Timer.
trapConfig	1.3.6.1.4.1.498.22.1.2.1.4
trapStatus	1.3.6.1.4.1.498.22.1.2.4
INT unitType	1.3.6.1.4.1.498.22.1.2.1.3.1	INTEGER	read-write	Defines the ap553 as a master or remote unit in the network. This option is used to define the probe(s) installed on the local management network. As a master, PVC hiding is disabled, which allows discovery of remotely managed probes. WEBFLAG Master Remote WEBEND
INT userLmiInterfaceDownTrapSeverity	1.3.6.1.4.1.498.22.1.2.1.4.36	INTEGER	read-write	Controls the reporting of and defines severity of the userLmiInterfaceDown exception trap. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND

RFC description

Monitors General DataComm FR probe performance metrics and alarms on frame relay networks.

Start monitoring General DataComm Frame Relay access/probe equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AP553-MIB

What Is AP553-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description