KBRIDGE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, IpAddress, Gauge32, Unsigned32, enterprises FROM SNMPv2-SMI; -- ********************************************************************** -- * MODULE IDENTITY -- ********************************************************************** karlnet MODULE-IDENTITY LAST-UPDATED "200201281200Z" ORGANIZATION "KarlNet Incorporated" CONTACT-INFO "Postal: KarlNet Incorporated 525 Metro Place North Suite 100 Dublin, OH 43017 USA Tel: +1 614 822 5275 Fax: +1 614 822 0024 E-mail: info@karlnet.com" DESCRIPTION "The MIB module for KarlNet entities. iso(1).org(3).dod(6).internet(1).mgmt(4).enterprises(1).karlnet(762)" REVISION "200201281200Z" DESCRIPTION "Several minor updates; also added ClientInfo and SEC MIB sections." REVISION "200107171200Z" DESCRIPTION "Converted to public form." REVISION "200105091200Z" DESCRIPTION "Updated CONTACT-INFO. Added the kbSEC and kbClientInfo sections." REVISION "200009181200Z" DESCRIPTION "Changed kbWirelessStationSNR type from Gauge32 to INTEGER" REVISION "200007251200Z" DESCRIPTION "Added description text on kbControlTemperature to clarify that the temperature given is in half-degree increments centigrade. That is, kbControlTemperature = 66 implies 33 degrees Celsius." REVISION "200007111200Z" DESCRIPTION "Initial Release." ::= { enterprises 762 } kbridge-mib OBJECT IDENTIFIER ::= { karlnet 2 } karlNetKBControl OBJECT IDENTIFIER ::= { kbridge-mib 1 } -- (Borrowed from the Bridge MIB) -- All representations of MAC addresses in this MIB Module -- use, as a textual convention (i.e. this convention does -- not affect their encoding), the data type: MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address -- in the -- "canonical" -- order -- 16-bit addresses, if needed, are represented by setting -- their upper 4 octets to all 0's, i.e., AAFF would be -- represented as 00000000AAFF. -- ****************************************** -- ** kbControl block -- ****************************************** -- KBRIDGE control MIB. -- 6 = kbControlReboot -- 9 = kbDummy - used for testing write community -- 11 = shutdown (1 = shutdown) -- 12 = Temperature from Dallas chip in 1/2 degree centagrade increments) kbControlReboot OBJECT-TYPE SYNTAX INTEGER (1) MAX-ACCESS write-only STATUS current DESCRIPTION "Set this OID value to 1 to reboot the KarlBridge." ::= { karlNetKBControl 6 } kbControlTestSNMPWrite OBJECT-TYPE SYNTAX INTEGER (1) MAX-ACCESS write-only STATUS current DESCRIPTION "This OID is provided to test whether your SNMP software can successfully set an OID on the KarlBridge by setting its value to 1." ::= { karlNetKBControl 9 } kbControlShutdown OBJECT-TYPE SYNTAX INTEGER (1) MAX-ACCESS write-only STATUS current DESCRIPTION "Set this OID to 1 to shutdown the KarlBridge." ::= { karlNetKBControl 11 } kbControlTemperature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "For KarlBridges equipped with a Dallas temperature chip, returns the temperature of the Dallas chip in 1/2 degree centigrade increments (+/- 0.5 degrees C). To determine the correct temperature in Centigrade, divide by 2. To determine the correct temperature in Fahrenheit, divide by 2, then multiply by 9/5 and add 32. KarlBridges that are not equipped with the Dallas chip return a 'noSuchName' error." ::= { karlNetKBControl 12 } ------------------------------------------------------------------- --- KarlBridge kbWireless MIB module --- Holds various client station statistics, mostly for the --- TurboCell outdoor protocols. --- The 'kbWirelessTest*' values are also used for general-purpose --- wireless link test statistics --- kbWireless OBJECT IDENTIFIER ::= { kbridge-mib 5 } kbWirelessStationNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of registered stations (i.e. valid entries) in the kbWirelessStationTable." ::= { kbWireless 1 } kbWirelessStationTable OBJECT-TYPE SYNTAX SEQUENCE OF KBWirelessStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of wireless connections and their attributes. Each entry in the table corresponds to a particular wireless station (usually a satellite) that is attached to a particular wireless interface." ::= { kbWireless 2 } kbWirelessStationEntry OBJECT-TYPE SYNTAX KBWirelessStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the kbWirelessStationTable. Each entry corresponds to a particular wireless station connected to one of the KarlBridge's interfaces. The entries are indexed by kbWirelessStationIndex and also can be generally considered unique based upon the kbWirelessStationMACAddress field." INDEX { kbWirelessStationIndex } ::= { kbWirelessStationTable 1 } KBWirelessStationEntry ::= SEQUENCE { kbWirelessStationIndex Unsigned32, kbWirelessStationInterfaceNumber Unsigned32, kbWirelessStationName OCTET STRING, kbWirelessStationExclHellos Counter32, kbWirelessStationGoodHellos Counter32, kbWirelessStationLowHellos Counter32, kbWirelessStationSignalLevel Gauge32, kbWirelessStationNoiseLevel Gauge32, kbWirelessStationSignalQuality Gauge32, kbWirelessStationPktTransmits Counter32, kbWirelessStationMACAddress OCTET STRING, kbWirelessStationTransmits Counter32, kbWirelessStationBadTransmits Counter32, kbWirelessStationReTransmits Counter32, kbWirelessStationIPAddress IpAddress, kbWirelessStationType INTEGER, kbWirelessStationSNR INTEGER, kbWirelessStationState INTEGER, kbWirelessPoll Counter32, kbWirelessPollData Counter32, kbWirelessPollNoData Counter32, kbWirelessPollMoreData Counter32, kbWirelessPollTimeouts Counter32, kbWirelessPollOfflines Counter32, kbWirelessTestTime Counter32, kbWirelessTestInterval Unsigned32, kbWirelessTestPacketSize Integer32, kbWirelessTestOurTx Counter32, kbWirelessTestOurRx Counter32, kbWirelessTestHisTx Counter32, kbWirelessTestHisRx Counter32, kbWirelessTestOurCurSignalLevel Gauge32, kbWirelessTestOurCurNoiseLevel Gauge32, kbWirelessTestOurCurSignalQuality Gauge32, kbWirelessTestOurCurSNR Gauge32, kbWirelessTestOurMinSignalLevel Gauge32, kbWirelessTestOurMinNoiseLevel Gauge32, kbWirelessTestOurMinSignalQuality Gauge32, kbWirelessTestOurMinSNR Gauge32, kbWirelessTestOurMaxSignalLevel Gauge32, kbWirelessTestOurMaxNoiseLevel Gauge32, kbWirelessTestOurMaxSignalQuality Gauge32, kbWirelessTestOurMaxSNR Gauge32, kbWirelessTestHisCurSignalLevel Gauge32, kbWirelessTestHisCurNoiseLevel Gauge32, kbWirelessTestHisCurSignalQuality Gauge32, kbWirelessTestHisCurSNR Gauge32, kbWirelessTestHisMinSignalLevel Gauge32, kbWirelessTestHisMinNoiseLevel Gauge32, kbWirelessTestHisMinSignalQuality Gauge32, kbWirelessTestHisMinSNR Gauge32, kbWirelessTestHisMaxSignalLevel Gauge32, kbWirelessTestHisMaxNoiseLevel Gauge32, kbWirelessTestHisMaxSignalQuality Gauge32, kbWirelessTestHisMaxSNR Gauge32, kbWirelessTestLinkUp INTEGER, kbWirelessTestLostLink INTEGER, kbWirelessTestLostTestPkts INTEGER, kbWirelessStationRadioType INTEGER, kbWirelessRecordType INTEGER, kbWirelessStationPktReceives Counter32, kbWirelessStationReceives Counter32, kbWirelessStationBytesReceives Counter32, kbWirelessStationBytesTransmits Counter32, kbWirelessRegistrationRecord OCTET STRING, kbWirelessStationFragmentDiscards Counter32, kbWirelessStationFragmentMissings Counter32, kbWirelessStationFragmentLostFrames Counter32, kbWirelessStationFragmentErrors Counter32 } kbWirelessStationIndex OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this entry in the kbWirelessStationTable. Each entry in the table has a unique kbWirelessStationIndex." ::= { kbWirelessStationEntry 1 } kbWirelessStationInterfaceNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number of the wireless network interface that this entry is attached to. When a KarlBridge contains multiple wireless network interfaces, different entries may contain different values for this field. Interface numbering includes non-wireless interfaces, with the first network interface being number 1." ::= { kbWirelessStationEntry 2 } kbWirelessStationName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the remote wireless station as reported to the KarlBridge." ::= { kbWirelessStationEntry 3 } kbWirelessStationExclHellos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Hello packets from the KarlBridge that were received by the remote station with Excellent signal quality." ::= { kbWirelessStationEntry 4 } kbWirelessStationGoodHellos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Hello packets from the KarlBridge that were received by the remote station with Good signal quality." ::= { kbWirelessStationEntry 5 } kbWirelessStationLowHellos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Hello packets from the KarlBridge that were received by the remote station with Low signal quality." ::= { kbWirelessStationEntry 6 } kbWirelessStationSignalLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The radio signal level in percentage." ::= { kbWirelessStationEntry 7 } kbWirelessStationNoiseLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The radio noise level in percentage." ::= { kbWirelessStationEntry 8 } kbWirelessStationSignalQuality OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The relative signal quality of the radio transmissions." ::= { kbWirelessStationEntry 9 } kbWirelessStationPktTransmits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Ethernet packets the remote station has transmitted through the wireless interface connected to the KarlBridge." ::= { kbWirelessStationEntry 10 } kbWirelessStationMACAddress OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Ethernet (MAC) address of the remote station's wireless interface that is connected to the KarlBridge." ::= { kbWirelessStationEntry 11 } kbWirelessStationTransmits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of wireless transmissions the KarlBridge has made to the remote station through this interface. This number does not necessarily correspond to the number of Ethernet packets transmitted through this interface (see kbWirelessStationPktTransmits)." ::= { kbWirelessStationEntry 12 } kbWirelessStationBadTransmits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of failed wireless transmissions the KarlBridge has made to the remote station through this interface. If a wireless transmission is not received after 10 attempts, this counter is incremented." ::= { kbWirelessStationEntry 13 } kbWirelessStationReTransmits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of wireless re-transmissions the KarlBridge has attempted to the remote station through this interface." ::= { kbWirelessStationEntry 14 } kbWirelessStationIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the remote station, if any." ::= { kbWirelessStationEntry 15 } kbWirelessStationType OBJECT-TYPE SYNTAX INTEGER { compatibility-Mode(1), tc-Peer-to-Peer(2), tc-Base-Station(3), tc-Satellite-Station(4), tc-Polling-Base-Station(5), tc-PtP-Controller(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The remote station's mode of operation on this radio interface. Possible values are: compatibility-Mode(1) -- IEEE 802.11 mode or legacy Wireless(-I) mode tc-Peer-to-Peer(2) -- TurboCell Peer-to-Peer Station (no base stations, no polling) tc-Base-Station(3) -- TurboCell Base Station tc-Satellite-Station(4) -- TurboCell Satellite Station tc-Polling-Base-Station(5) -- TurboCell Polling Base Station tc-PtP-Controller(6) -- TurboCell Point-to-Point Controller (Single-User Base Station)" ::= { kbWirelessStationEntry 16 } kbWirelessStationSNR OBJECT-TYPE SYNTAX INTEGER { unknown-SNR(1), low-SNR(2), good-SNR(3), excellent-SNR(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The relative Signal-to-Noise Ratio of the wireless connection between the remote station and the KarlBridge." ::= { kbWirelessStationEntry 17 } kbWirelessStationState OBJECT-TYPE SYNTAX INTEGER { online(1), offline(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The remote station's wireless connection status. The remote station is said to be offline when it appears to cease wireless communication, either because it no longer acknowledges poll packets or no longer sends poll packets" ::= { kbWirelessStationEntry 18 } kbWirelessPoll OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the KarlBridge has polled the remote station." ::= { kbWirelessStationEntry 19 } kbWirelessPollData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the KarlBridge has polled the remote station that the remote station has responded with data, after which the remote station's transmit queue is empty." ::= { kbWirelessStationEntry 20 } kbWirelessPollNoData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the KarlBridge has polled the remote station that the remote station has not responded with data." ::= { kbWirelessStationEntry 21 } kbWirelessPollMoreData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of times the KarlBridge has polled the remote station that the remote station has had more data in its transmit queue than it could transmit in a single poll response." ::= { kbWirelessStationEntry 22 } kbWirelessPollTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the KarlBridge has polled the remote station and the remote station has not responded before the timeout period expired." ::= { kbWirelessStationEntry 23 } kbWirelessPollOfflines OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the remote station has gone offline. The value is relevant only when the KarlBridge is in one of the Base Station modes (polling or non-polling)." ::= { kbWirelessStationEntry 24 } kbWirelessTestTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds remaining in the wireless link test. This value is read-writable, and is decremented by the device every second until it reaches 0, at which point the test is finished. To stop the test, set this value to 0." ::= { kbWirelessStationEntry 25 } kbWirelessTestInterval OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "The duration (in hundredths of seconds) of the radio link test performed between the KarlBridge and the remote station." ::= { kbWirelessStationEntry 26 } kbWirelessTestPacketSize OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The size of the radio link test packets sent between the KarlBridge and the remote station." ::= { kbWirelessStationEntry 27 } kbWirelessTestOurTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The radio transmit rate of the KarlBridge's radio when performing the radio link test." ::= { kbWirelessStationEntry 28 } kbWirelessTestOurRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The radio receive rate used by the KarlBridge when performing the radio link test." ::= { kbWirelessStationEntry 29 } kbWirelessTestHisTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The radio transmit rate of the remote station's radio when performing the radio link test." ::= { kbWirelessStationEntry 30 } kbWirelessTestHisRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The radio receive rate used by the remote station when performing the radio link test." ::= { kbWirelessStationEntry 31 } kbWirelessTestOurCurSignalLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current local signal level for the radio link test as recorded by the KarlBridge." ::= { kbWirelessStationEntry 32 } kbWirelessTestOurCurNoiseLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current local noise level for the radio link test as recorded by the KarlBridge." ::= { kbWirelessStationEntry 33 } kbWirelessTestOurCurSignalQuality OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current relative signal quality for the radio link test as recorded by the KarlBridge." ::= { kbWirelessStationEntry 34 } kbWirelessTestOurCurSNR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current local Signal-to-Noise Ratio (SNR) for the radio link test as recorded by the KarlBridge." ::= { kbWirelessStationEntry 35 } kbWirelessTestOurMinSignalLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum local signal level recorded by the KarlBridge during the radio link test." ::= { kbWirelessStationEntry 36 } kbWirelessTestOurMinNoiseLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum local noise level recorded by the KarlBridge during the radio link test." ::= { kbWirelessStationEntry 37 } kbWirelessTestOurMinSignalQuality OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum local signal quality recorded by the KarlBridge during the radio link test." ::= { kbWirelessStationEntry 38 } kbWirelessTestOurMinSNR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum local Signal-to-Noise Ratio (SNR) recorded by the KarlBridge during the radio link test." ::= { kbWirelessStationEntry 39 } kbWirelessTestOurMaxSignalLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum local signal level recorded by the KarlBridge during the radio link test." ::= { kbWirelessStationEntry 40 } kbWirelessTestOurMaxNoiseLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum local noise level recorded by the KarlBridge during the radio link test." ::= { kbWirelessStationEntry 41 } kbWirelessTestOurMaxSignalQuality OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum local signal quality recorded by the KarlBridge during the radio link test." ::= { kbWirelessStationEntry 42 } kbWirelessTestOurMaxSNR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum local Signal-to-Noise Ratio (SNR) recorded by the KarlBridge during the radio link test." ::= { kbWirelessStationEntry 43 } kbWirelessTestHisCurSignalLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current signal level at the remote station for the radio link test." ::= { kbWirelessStationEntry 44 } kbWirelessTestHisCurNoiseLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current noise level at the remote station for the radio link test." ::= { kbWirelessStationEntry 45 } kbWirelessTestHisCurSignalQuality OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current signal quality at the remote station for the radio link test." ::= { kbWirelessStationEntry 46 } kbWirelessTestHisCurSNR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current Signal-to-Noise Ratio (SNR) at the remote station for the radio link test." ::= { kbWirelessStationEntry 47 } kbWirelessTestHisMinSignalLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum signal level recorded at the remote station during the radio link test." ::= { kbWirelessStationEntry 48 } kbWirelessTestHisMinNoiseLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum noise level recorded at the remote station during the radio link test." ::= { kbWirelessStationEntry 49 } kbWirelessTestHisMinSignalQuality OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum signal quality recorded at the remote station during the radio link test." ::= { kbWirelessStationEntry 50 } kbWirelessTestHisMinSNR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum signal level recorded at the remote station during the radio link test." ::= { kbWirelessStationEntry 51 } kbWirelessTestHisMaxSignalLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum signal level recorded at the remote station during the radio link test." ::= { kbWirelessStationEntry 52 } kbWirelessTestHisMaxNoiseLevel OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum remote noise level recorded at the remote station during the radio link test." ::= { kbWirelessStationEntry 53 } kbWirelessTestHisMaxSignalQuality OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum signal quality recorded at the remote station during the radio link test." ::= { kbWirelessStationEntry 54 } kbWirelessTestHisMaxSNR OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum Signal-to-Noise Ratio (SNR) recorded at the remote station during the radio link test." ::= { kbWirelessStationEntry 55 } kbWirelessTestLinkUp OBJECT-TYPE SYNTAX INTEGER { down(0), up(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the radio link test. Possible values are: down(0) -- the radio link test IS NOT currently running up(1) -- the radio link test IS currently running" ::= { kbWirelessStationEntry 56 } kbWirelessTestLostLink OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of time this link was lost while performing the radio link test." ::= { kbWirelessStationEntry 57 } kbWirelessTestLostTestPkts OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of radio link test packets that were lost during the test interval." ::= { kbWirelessStationEntry 58 } kbWirelessStationRadioType OBJECT-TYPE SYNTAX INTEGER { waveLAN-I(0), clarion-M10(1), waveLAN-IEEE(2), microwave(3), radioLAN(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of radio the remote station is using on this interface. Possible values include: waveLAN-I(0) -- legacy Lucent Wireless-I radio (900 MHz) clarion-M10(1) -- Clarion M10 radio waveLAN-IEEE(2) -- Lucent ORiNOCO (WaveLAN) IEEE 802.11 radio (2.4 GHz) microwave(3) -- some type of microwave radio radioLAN(4) -- some type of RadioLAN radio" ::= { kbWirelessStationEntry 59 } kbWirelessRecordType OBJECT-TYPE SYNTAX INTEGER { linktest(1), turboCell(2), combination(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this record entry. Possible values include: linktest(1) -- This record contains ONLY LinkTest results turboCell(2) -- This record contains ONLY a TurboCell station entry combination(3) -- This record contains BOTH LinkTest results AND a TurboCell station entry" ::= { kbWirelessStationEntry 60 } kbWirelessStationPktReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets the KarlBridge has received on this link." ::= { kbWirelessStationEntry 61 } kbWirelessStationReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of wireless transmissions the KarlBridge has received on this link." ::= { kbWirelessStationEntry 62 } kbWirelessStationBytesReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes received by the KarlBridge on this link, including wireless packet headers." ::= { kbWirelessStationEntry 63 } kbWirelessStationBytesTransmits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes transmitted by the KarlBridge on this link, including wireless packet headers." ::= { kbWirelessStationEntry 64 } kbWirelessRegistrationRecord OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS obsolete DESCRIPTION "For testing purposes only." ::= { kbWirelessStationEntry 65 } kbWirelessStationFragmentDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times on this connection that the KarlBridge has discarded a fragment. A fragment is discarded because not all fragments needed to reconstruct a packet are present or we need room for a more recent fragment." ::= { kbWirelessStationEntry 66 } kbWirelessStationFragmentMissings OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times on this connection that the KarlBridge has detected that a fragment needed to recontruct a packet is missing." ::= { kbWirelessStationEntry 67 } kbWirelessStationFragmentLostFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times on this connection that the KarlBridge detected that a frame containing fragments needed to reconstruct a packet is lost." ::= { kbWirelessStationEntry 68 } kbWirelessStationFragmentErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times on this connection the KarlBridge has encountered an error while reconstructing a packet from fragments." ::= { kbWirelessStationEntry 69 } -- *********************************************************************** -- ** THE OID'S BELOW MAY CHANGE AND ARE NOT GUARANTEED TO BE SUPPORTED ** -- ************************************************************************** -- Each of these OID's is a list corresponding to each interface. -- ************************************************************************** -- kbWirelessLocalInterfaceType OBJECT IDENTIFIER -- OBJECT-TYPE -- SYNTAX SEQUENCE OF INTEGER -- { -- compatibility-Mode(1), -- tc-Peer-to-Peer(2), -- tc-Base-Station(3), -- tc-Satellite-Station(4), -- tc-Polling-Base-Station(5) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "How the KarlBridge's network interfaces are configured. Possible values are: -- compatibility-Mode(1) IEEE 802.11 mode or legacy Wireless(-I) mode -- tc-Peer-to-Peer(2) TurboCell Peer-to-Peer Station (no base stations, no polling) -- tc-Base-Station(3) TurboCell Base Station -- tc-Satellite-Station(4) TurboCell Satellite Station -- tc-Polling-Base-Station(5) TurboCell Polling Base Station" -- ::= { kbWireless 3 } -- -- kbWirelessTestExploreTime OBJECT IDENTIFIER -- OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Time in seconds for the explore phase of the radio link test. -- (The explore phase finds suitable partners with which to perform -- a radio link test.) It is set to non-zero value to start the test. -- The KarlBridge resets the number after starting the explore phase." -- ::= { kbWireless 4 } -- -- kbWirelessTestExploreRate OBJECT IDENTIFIER -- OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The interval in hundredths of seconds between radio link test -- explore packets." -- ::= { kbWireless 5 } -- --- ************************************************************************** -- ** END UNSUPPORTED OID'S --- ************************************************************************** ------------------------------------------------------------------- --- KarlBridge SEC MIB module --- The Super Ethernet Converter (SEC) tunnels Ethernet traffic --- from multiple client stations to another station by wrapping --- each Ethernet packet with a source of the SEC Station and --- destination address of the tunnel partner. --- kbSEC OBJECT IDENTIFIER ::= { kbridge-mib 8 } kbSECClientTable OBJECT-TYPE SYNTAX SEQUENCE OF KBSECClientEntry ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about Super Ethernet Converter (SEC) clients and the SEC station through which they are connected." ::= { kbSEC 1 } kbSECClientEntry OBJECT-TYPE SYNTAX KBSECClientEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry in the kbSECClientTable. Each entry contains the client's MAC address (which is the table index) and the MAC address of the SEC through which the client is connected." INDEX { kbSECClientAddress } ::= { kbSECClientTable 1 } KBSECClientEntry ::= SEQUENCE { kbSECClientAddress MacAddress, kbSECStationAddress MacAddress } kbSECClientAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS current DESCRIPTION "The unicast MAC address of the client station that is connecting through the SEC unit denoted by kbSECStationAddress." ::= { kbSECClientEntry 1 } kbSECStationAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS current DESCRIPTION "The unicast MAC address of the SEC station through which the client is connected." ::= { kbSECClientEntry 2 } ------------------------------------------------------------------- --- KarlBridge Client Info MIB module --- --- kbClientInfo OBJECT IDENTIFIER ::= { kbridge-mib 9 } -------------------- --- The kbClientInfoByNumberTable, which is the same information as the --- kbClientInfoByMacTable below, but is indexed by virtual port number. --- --- .kbCIbyNumberVirtualPortNumber(1) [ 4 bytes] --- .kbCIbyNumberMACAddress(2) [ 6 bytes] --- .kbCIByNumberInterfaceNum(3) [ 4 bytes] --- .kbCIbyNumberStationName(4) [32 bytes] --- .kbCIbyNumberTotalBytes(5) [ 4 bytes] --- .kbCIbyNumberTotalPackets(6) [ 4 bytes] --- .kbCIbyNumberSNRAverage(7) [ 4 bytes] --- .kbCIbyNumberTimeLastRecv(8) [ 4 bytes] kbClientInfoByNumberTable OBJECT-TYPE SYNTAX SEQUENCE OF KBClientInfoByNumberEntry ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about (wireless) clients that pass traffic through this KarlBridge, indexed by a virtual port number that is unique only within this table." ::= { kbClientInfo 1 } kbClientInfoByNumberEntry OBJECT-TYPE SYNTAX KBClientInfoByNumberEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry in the kbClientInfoByNumberTable. Each entry contains information for a particular client station indexed by the client's virtual port number." INDEX { kbCIbyNumberVirtualPort } ::= { kbClientInfoByNumberTable 1 } KBClientInfoByNumberEntry ::= SEQUENCE { kbCIbyNumberVirtualPort Unsigned32, kbCIbyNumberMACAddress MacAddress, kbCIByNumberInterfaceNum Unsigned32, kbCIbyNumberStationName OCTET STRING, kbCIbyNumberTotalBytes Counter32, kbCIbyNumberTotalPackets Counter32, kbCIbyNumberSNRAverage Gauge32, kbCIbyNumberTimeLastRecv Counter32 } kbCIbyNumberVirtualPort OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS current DESCRIPTION "The virtual port number to which the client is connected. Used as the index for this table." ::= { kbClientInfoByNumberEntry 1 } kbCIbyNumberMACAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS current DESCRIPTION "The client's unique unicast MAC Address. This value can be used as the index in the kbClientInfoByMacTable." ::= { kbClientInfoByNumberEntry 2 } kbCIByNumberInterfaceNum OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS current DESCRIPTION "The KarlBridge interface to which the client is connected." ::= { kbClientInfoByNumberEntry 3 } kbCIbyNumberStationName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS current DESCRIPTION "The client's ASCII Station Name." ::= { kbClientInfoByNumberEntry 4 } kbCIbyNumberTotalBytes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS current DESCRIPTION "The total number of bytes that have been passed through the KarlBridge for this client (clientTotalBytes = clientSentBytes + clientRecvBytes)" ::= { kbClientInfoByNumberEntry 5 } kbCIbyNumberTotalPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS current DESCRIPTION "The total number of packets that have been passed through the KarlBridge for this client (clientTotalPackets = clientSentPackets + clientRecvPackets)" ::= { kbClientInfoByNumberEntry 6 } kbCIbyNumberSNRAverage OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "The running average of the Signal-to-Noise Ratio (SNR) for this client, if the client is connected directly to the KarlBridge on a wireless interface. 0 otherwise." ::= { kbClientInfoByNumberEntry 7 } kbCIbyNumberTimeLastRecv OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS current DESCRIPTION "The number of time ticks (in 1/100ths of a second) since a packet was last received from this client." ::= { kbClientInfoByNumberEntry 8 } -------------------- --- The kbClientInfoByMacTable, which is the same information as the --- kbClientInfoByNumberTable above, but is indexed by MAC Address. --- --- .kbCIbyMacMACAddress(1) [ 6 bytes] --- .kbCIbyMacVirtualPort(2) [ 4 bytes] --- .kbCIByMacInterfaceNum(3) [ 4 bytes] --- .kbCIbyMacStationName(4) [32 bytes] --- .kbCIbyMacTotalBytes(5) [ 4 bytes] --- .kbCIbyMacTotalPackets(6) [ 4 bytes] --- .kbCIbyMacSNRAverage(7) [ 4 bytes] --- .kbCIbyMacTimeLastRecv(8) [ 4 bytes] kbClientInfoByMacTable OBJECT-TYPE SYNTAX SEQUENCE OF KBClientInfoByMacEntry ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about (wireless) clients that pass traffic through this KarlBridge, indexed by client MAC Address." ::= { kbClientInfo 2 } kbClientInfoByMacEntry OBJECT-TYPE SYNTAX KBClientInfoByMacEntry ACCESS not-accessible STATUS current DESCRIPTION "An entry in the kbClientInfoByMacTable. Each entry contains information for a particular client station indexed by the client's unique MAC Address." INDEX { kbCIbyMacMACAddress } ::= { kbClientInfoByMacTable 1 } KBClientInfoByMacEntry ::= SEQUENCE { kbCIbyMacMACAddress MacAddress, kbCIbyMacVirtualPort Unsigned32, kbCIbyMacInterfaceNum Unsigned32, kbCIbyMacStationName OCTET STRING, kbCIbyMacTotalBytes Counter32, kbCIbyMacTotalPackets Counter32, kbCIbyMacSNRAverage Gauge32, kbCIbyMacTimeLastRecv Counter32 } kbCIbyMacMACAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS current DESCRIPTION "The client's unique unicast MAC Address. Used as the index for this table." ::= { kbClientInfoByMacEntry 1 } kbCIbyMacVirtualPort OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS current DESCRIPTION "The virtual port number to which the client is connected. This value can be used as the index in the kbClientInfoByNumberTable." ::= { kbClientInfoByMacEntry 2 } kbCIbyMacInterfaceNum OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS current DESCRIPTION "The KarlBridge interface to which the client is connected." ::= { kbClientInfoByMacEntry 3 } kbCIbyMacStationName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS current DESCRIPTION "The client's ASCII Station Name." ::= { kbClientInfoByMacEntry 4 } kbCIbyMacTotalBytes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS current DESCRIPTION "The total number of bytes that have been passed through the KarlBridge for this client (clientTotalBytes = clientSentBytes + clientRecvBytes)" ::= { kbClientInfoByMacEntry 5 } kbCIbyMacTotalPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS current DESCRIPTION "The total number of packets that have been passed through the KarlBridge for this client (clientTotalPackets = clientSentPackets + clientRecvPackets)" ::= { kbClientInfoByMacEntry 6 } kbCIbyMacSNRAverage OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "The running average of the Signal-to-Noise Ratio (SNR) for this client, if the client is connected directly to the KarlBridge on a wireless interface. 0 otherwise." ::= { kbClientInfoByMacEntry 7 } kbCIbyMacTimeLastRecv OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS current DESCRIPTION "The number of time ticks (in 1/100ths of a second) since a packet was last received from this client." ::= { kbClientInfoByMacEntry 8 } --- --- END of KarlBridge Client Info MIB module ------------------------------------------------------------------- END