All MIBs › Juniper-POLICY-MIB › juniPolicyOperStatus
juniPolicyOperStatus
Module: Juniper-POLICY-MIB
OID (symbolic): Juniper-POLICY-MIB::juniPolicyOperStatus
OID (numeric): 1.3.6.1.4.1.4874.2.2.27.1.3.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This obsolete object was used to retrieve the operational state of a policy.
If a policy is disabled, it is not applied to any interfaces within the system.
If a policy is invalid, there is a problem with the policy preventing it from being applied to an interface. An error code providing diagnostic information about the problem is found in juniPolicyErrorValue.
If a policy is enabled, it has been applied to one or more interfaces within the system.
This object was made obsolete due to some changes in E-Series which eliminated the possibility of a policy being operationaly disabled.
What is juniPolicyOperStatus?
Obsolete read-only status showing whether a policy was disabled(0), invalid(1) due to a configuration problem (with detail in juniPolicyErrorValue), or enabled(2) and actively applied to at least one interface. It was made obsolete because later E-Series software removed the possibility of a policy being operationally disabled independent of its admin state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.27.1.3.2.1.4 snmpwalk -v2c -c public <target> Juniper-POLICY-MIB::juniPolicyOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.27.1.3.2.1.4.1 snmpget -v2c -c public <target> Juniper-POLICY-MIB::juniPolicyOperStatus.1
Start monitoring Juniper E-series router (routing/traffic policy filters, QoS classifiers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-POLICY-MIB::juniPolicyOperStatus OID value, configure state conditions and alerts, and monitor any Juniper E-series router (routing/traffic policy filters, QoS classifiers) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.27 | juniPolicyMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.27.1 | juniPolicyObjects | Juniper-POLICY-MIB |
| 1.3.6.1.4.1.4874.2.2.27.1.3 | juniPolicy | Juniper-POLICY-MIB |
| 1.3.6.1.4.1.4874.2.2.27.1.3.2 | juniPolicyTable | Juniper-POLICY-MIB |
| 1.3.6.1.4.1.4874.2.2.27.1.3.2.1 | juniPolicyEntry | Juniper-POLICY-MIB |
| 1.3.6.1.4.1.4874.2.2.27.1.3.2.1.4 | juniPolicyOperStatus | Juniper-POLICY-MIB |