All MIBs › JUNIPER-LSYSSP-NATSTATICRULE-MIB › jnxLsysSpNATstaticruleUsedAmount
jnxLsysSpNATstaticruleUsedAmount
Module: JUNIPER-LSYSSP-NATSTATICRULE-MIB
OID (symbolic): JUNIPER-LSYSSP-NATSTATICRULE-MIB::jnxLsysSpNATstaticruleUsedAmount
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.17.14.1.2.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The NAT-static-rule resource consumption over all LSYS.
What is jnxLsysSpNATstaticruleUsedAmount?
This read-only Unsigned32 reports the total static NAT rule resource consumption summed across all logical systems (LSYS) on the device, as opposed to the per-LSYS table entries. It gives an admin a single device-wide gauge of static NAT rule usage useful for capacity planning across the whole chassis. For example, comparing this value against jnxLsysSpNATstaticruleMaxQuota tells an admin how close the entire device is to its global static NAT rule limit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.14.1.2.1 snmpwalk -v2c -c public <target> JUNIPER-LSYSSP-NATSTATICRULE-MIB::jnxLsysSpNATstaticruleUsedAmount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.17.14.1.2.1.1 snmpget -v2c -c public <target> JUNIPER-LSYSSP-NATSTATICRULE-MIB::jnxLsysSpNATstaticruleUsedAmount.1
Start monitoring Juniper SRX series security device (logical-system NAT static-rule quota) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-LSYSSP-NATSTATICRULE-MIB::jnxLsysSpNATstaticruleUsedAmount OID value, configure state conditions and alerts, and monitor any Juniper SRX series security device (logical-system NAT static-rule quota) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17 | jnxLsysSecurityProfile | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.17.14 | jnxLsysSpNATstaticrule | JUNIPER-LSYS-SECURITYPROFILE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.17.14.1 | jnxLsysSpNATstaticruleMIB | JUNIPER-LSYSSP-NATSTATICRULE-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.14.1.2 | jnxLsysSpNATstaticruleSummary | JUNIPER-LSYSSP-NATSTATICRULE-MIB |
| 1.3.6.1.4.1.2636.3.39.1.17.14.1.2.1 | jnxLsysSpNATstaticruleUsedAmount | JUNIPER-LSYSSP-NATSTATICRULE-MIB |