ifSpeed
Module: ITF-MIB
OID (symbolic): ITF-MIB::ifSpeed
OID (numeric): 1.3.6.1.2.1.2.2.1.5
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description:
An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.
ALCATEL NOTE: SUPPORT: YES INSRVMOD: NA RANGE: See above PERSIST: NO DEFVALUE: NA UNITS: bits/second
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.2.2.1.5 snmpwalk -v2c -c public <target> ITF-MIB::ifSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.2.2.1.5.1 snmpget -v2c -c public <target> ITF-MIB::ifSpeed.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.2 | interfaces | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.2.2 | ifTable | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.2.2.1 | ifEntry | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.2.2.1.5 | ifSpeed | ITF-MIB |