ISPRO-MIB

All MIBs › ISPRO-MIB

Category: Device Management

Description: ISPro network management MIB providing SNMP objects for ISP-grade router and access device performance monitoring and configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ISPRO-MIB?

ISPRO-MIB is a proprietary MIB (branded Jacarta/webAppliance) for ISP-grade routers and access devices, providing objects for device identification, agent software versioning, and IP/network configuration. It exposes an identity group covering manufacturer, model, and agent software version, and a configuration group covering the device's IP address, gateway, subnet mask, and date/time (including NTP synchronization settings). In a monitoring context it is explicitly useful for confirming device identity and software version (isIdentAgentSoftwareVersion) for inventory/compliance purposes, and for verifying that network configuration (IP, gateway, mask) and time synchronization via NTP are correctly set, which affects log accuracy and management reachability. It is a self-contained proprietary MIB (Jacarta product line) without a documented dependency on other standard MIBs. It is typically deployed on Jacarta-branded ISP web/management appliances used for remote site monitoring and out-of-band management. Engineers can download the ISPRO-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ISPRO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Jacarta webAppliance ISP management device

Monitoring Examples

An administrator would poll isIdentManufacturer, isIdentModel, and isIdentAgentSoftwareVersion to inventory the device and confirm it is running an expected firmware release. isConfigIpAddress, isConfigGateway, and isConfigSubnetMask would be checked to verify network configuration matches provisioning records, while isConfigTimeFromNtp and isConfigNtpIpAddress reveal whether the device's clock (isConfigDate/isConfigTime) is being kept in sync via NTP rather than drifting on a free-running clock.

What Can Be Monitored

manufacturer/model/software version
IP address, gateway, and subnet mask
system date and time
NTP synchronization status and server

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
jacarta	1.3.6.1.4.1.19011
product	1.3.6.1.4.1.19011.1
webAppliance	1.3.6.1.4.1.19011.1.3
ispro	1.3.6.1.4.1.19011.1.3.2
isObjects	1.3.6.1.4.1.19011.1.3.2.1
isIdent	1.3.6.1.4.1.19011.1.3.2.1.1
STR isIdentManufacturer	1.3.6.1.4.1.19011.1.3.2.1.1.1	DisplayString	read-only	The name of the ispro manufacturer.
STR isIdentModel	1.3.6.1.4.1.19011.1.3.2.1.1.2	DisplayString	read-only	The ispro Model designation.
STR isIdentAgentSoftwareVersion	1.3.6.1.4.1.19011.1.3.2.1.1.3	DisplayString	read-only	The ispro software/firmware version. This variable may or may not have the same value as upsIdentUPSSoftwareVersion in some implementations.
STR isIdentName	1.3.6.1.4.1.19011.1.3.2.1.1.4	DisplayString	read-write	A string identifying the ispro. This object should be set by the administrator.
isConfig	1.3.6.1.4.1.19011.1.3.2.1.2
STR isConfigMibVersion	1.3.6.1.4.1.19011.1.3.2.1.2.1	DisplayString	read-only	The version of MIB spec.
isConfigNetwork	1.3.6.1.4.1.19011.1.3.2.1.2.2
IP isConfigIpAddress	1.3.6.1.4.1.19011.1.3.2.1.2.2.1	IpAddress	read-write	The ip address that NMS can identify the managed device
IP isConfigGateway	1.3.6.1.4.1.19011.1.3.2.1.2.2.2	IpAddress	read-write	The default gateway that allow device managed through routers
IP isConfigSubnetMask	1.3.6.1.4.1.19011.1.3.2.1.2.2.3	IpAddress	read-write	Internet address subnet mask
isConfigDateTime	1.3.6.1.4.1.19011.1.3.2.1.2.3
STR isConfigDate	1.3.6.1.4.1.19011.1.3.2.1.2.3.1	DisplayString	read-write	The date in ispro, format ask the Date Format of references
STR isConfigTime	1.3.6.1.4.1.19011.1.3.2.1.2.3.2	DisplayString	read-write	The time of ispro, format is (hh:mm:ss)
ISP isConfigTimeFromNtp	1.3.6.1.4.1.19011.1.3.2.1.2.3.3	IsproEnuEnable	read-write	Enable/disable update date/time from NTP server.
STR isConfigNtpIpAddress	1.3.6.1.4.1.19011.1.3.2.1.2.3.4	DisplayString	read-write	NTP IP address.
ISP isConfigNtpTimeZone	1.3.6.1.4.1.19011.1.3.2.1.2.3.5	IsproEnuTimeZone	read-write	Configure the time zone of ispro to access NTP server.
ISP isConfigDayLightSaving	1.3.6.1.4.1.19011.1.3.2.1.2.3.6	IsproEnuEnable	read-write	Enable/disable daylight saving for NTP time, if enabled, the time get from NTP will be set set one hour in advance to reflect daylight saving status.
isConfigLog	1.3.6.1.4.1.19011.1.3.2.1.2.4
INT isConfigHistoryLogFrequency	1.3.6.1.4.1.19011.1.3.2.1.2.4.1	INTEGER	read-write	The frequency of the history log updates. The value is in seconds
INT isConfigExtHistoryLogFrequency	1.3.6.1.4.1.19011.1.3.2.1.2.4.2	INTEGER	read-write	The frequency of the extended history log updates. The value is in seconds
ISP isConfigConfigurationLog	1.3.6.1.4.1.19011.1.3.2.1.2.4.3	IsproEnuEnable	read-write	Enable/disable ispro to log parameters change.
ISP isConfigLogType	1.3.6.1.4.1.19011.1.3.2.1.2.4.4	IsproLogType	read-only	The type of log in agent
ISP isConfigDhcpState	1.3.6.1.4.1.19011.1.3.2.1.2.5	IsproEnuEnable	read-write	Enable or disable DHCP/BootP capability
ISP isConfigPingState	1.3.6.1.4.1.19011.1.3.2.1.2.6	IsproEnuEnable	read-write	Enable or disable Ping Echo capability
ISP isConfigTftpState	1.3.6.1.4.1.19011.1.3.2.1.2.7	IsproEnuEnable	read-write	Enable or disable TFTP network upgrade capability
isConfigTelnet	1.3.6.1.4.1.19011.1.3.2.1.2.8
ISP isConfigTelnetState	1.3.6.1.4.1.19011.1.3.2.1.2.8.1	IsproEnuEnable	read-write	Enable or disable telnet access
INT isConfigTelnetPortNumber	1.3.6.1.4.1.19011.1.3.2.1.2.8.2	INTEGER	read-write	Setting the server port of telnet.
isConfigHttp	1.3.6.1.4.1.19011.1.3.2.1.2.9
ISP isConfigHttpState	1.3.6.1.4.1.19011.1.3.2.1.2.9.1	IsproEnuEnable	read-write	Enable or disable HTTP access
INT isConfigHttpPortNumber	1.3.6.1.4.1.19011.1.3.2.1.2.9.2	INTEGER	read-write	Setting the server port of HTTP.
ISP isConfigHttpSecurity	1.3.6.1.4.1.19011.1.3.2.1.2.9.3	IsproEnuEnable	read-write	Enable/disable HTTP access for read-only users
isConfigSnmp	1.3.6.1.4.1.19011.1.3.2.1.2.10
ISP isConfigSnmpState	1.3.6.1.4.1.19011.1.3.2.1.2.10.1	IsproEnuEnable	read-write	Enable or disable SNMP access
INT isConfigSnmpPortNumber	1.3.6.1.4.1.19011.1.3.2.1.2.10.2	INTEGER	read-write	Setting the server port of SNMP.
isConfigControl	1.3.6.1.4.1.19011.1.3.2.1.2.11
ISP isConfigResetToDefault	1.3.6.1.4.1.19011.1.3.2.1.2.11.1	IsproEnuReset	read-write	Reset all parameters of ispro to default value
ISP isConfigRestart	1.3.6.1.4.1.19011.1.3.2.1.2.11.2	IsproEnuRestart	read-write	Restart ispro
isConfigTrap	1.3.6.1.4.1.19011.1.3.2.1.2.12
INT isConfigTrapRetryCount	1.3.6.1.4.1.19011.1.3.2.1.2.12.1	INTEGER	read-write	The count of repeat traps to send to NMS before trap acknowledge received.
INT isConfigTrapRetryTime	1.3.6.1.4.1.19011.1.3.2.1.2.12.2	INTEGER	read-write	The time between retry traps send to NMS.
INT isConfigTrapAckSignature	1.3.6.1.4.1.19011.1.3.2.1.2.12.3	INTEGER	read-write	The signature of trap acknowledge.
INT isConfigRefreshRate	1.3.6.1.4.1.19011.1.3.2.1.2.13	INTEGER	read-write	The frequency that ispro refresh web page from agent (unit : second).
isConfigTrapReceiverTable	1.3.6.1.4.1.19011.1.3.2.1.2.14		not-accessible	A list of managers to send traps to. The number of entries is given by the value of isConfigNumTrapReceivers
isConfigTrapReceiverEntry	1.3.6.1.4.1.19011.1.3.2.1.2.14.1		not-accessible	The managers to send traps to.
INT isReceiverIndex	1.3.6.1.4.1.19011.1.3.2.1.2.14.1.1	INTEGER	read-only	The index to a trap receiver entry.
IP isReceiverAddr	1.3.6.1.4.1.19011.1.3.2.1.2.14.1.2	IpAddress	read-write	The IP address of the manager to send a trap to.
STR isReceiverCommunityString	1.3.6.1.4.1.19011.1.3.2.1.2.14.1.3	DisplayString	read-write	The community name to use in the trap when sent to the manager.
ISP isReceiverSeverityLevel	1.3.6.1.4.1.19011.1.3.2.1.2.14.1.4	IsproEnuSeverity	read-write	The severity level of traps to be received by this manager.
STR isReceiverDescription	1.3.6.1.4.1.19011.1.3.2.1.2.14.1.5	DisplayString	read-write	Description of trap receivers
isConfigAccessControlTable	1.3.6.1.4.1.19011.1.3.2.1.2.15		not-accessible	A list of managers which can access ispro with private community string.
isConfigAccessControlEntry	1.3.6.1.4.1.19011.1.3.2.1.2.15.1		not-accessible	The managers.
INT isAccessIndex	1.3.6.1.4.1.19011.1.3.2.1.2.15.1.1	INTEGER	read-only	The index to an access control entry.
IP isAccessControlAddr	1.3.6.1.4.1.19011.1.3.2.1.2.15.1.2	IpAddress	read-write	The IP address of the manager to access ispro
STR isAccessCommunityString	1.3.6.1.4.1.19011.1.3.2.1.2.15.1.3	DisplayString	read-write	The community name to use in the manager when access ispro
ISP isAccessControlMode	1.3.6.1.4.1.19011.1.3.2.1.2.15.1.4	IsproEnuAccess	read-write	Access type, only read/Write access type can change parameter of ispro
STR isAccessAccount	1.3.6.1.4.1.19011.1.3.2.1.2.15.1.5	DisplayString	read-write	Access account, the account for web login to access ispro
ISP isConfigTemperatureUnit	1.3.6.1.4.1.19011.1.3.2.1.2.16	IsproEnuTempUnit	read-write	The temperature unit of the system, can be Celsius or Fahrenheit
ISP isConfigDateFormat	1.3.6.1.4.1.19011.1.3.2.1.2.17	IsproEnuDateFormat	read-write	The date format of the system, can be dd/mm/yyyy or mm/dd/yyyy
isDevice	1.3.6.1.4.1.19011.1.3.2.1.3
isDeviceMonitor	1.3.6.1.4.1.19011.1.3.2.1.3.1
isDeviceMonitorTemperatureTable	1.3.6.1.4.1.19011.1.3.2.1.3.1.1		not-accessible	The temperature monitoring table, to provides overall status of temperature.
isDeviceMonitorTemperatureEntry	1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1		not-accessible	The temperature monitoring table, to provides overall status of temperature.
INT isDeviceMonitorTemperatureIndex	1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.1	INTEGER	read-only	The index to a temperature entry.
STR isDeviceMonitorTemperatureName	1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.2	DisplayString	read-only	The temperature sensor name.
INT isDeviceMonitorTemperature	1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.3	INTEGER	read-only	The temperature of sensor on device Ispro, the unit is 0.01 degree.
ISP isDeviceMonitorTemperatureAlarm	1.3.6.1.4.1.19011.1.3.2.1.3.1.1.1.4	IsproEnuThresholdStatus	read-only	The status of temperature sensor in Ispro.
isDeviceMonitorHumidityTable	1.3.6.1.4.1.19011.1.3.2.1.3.1.2		not-accessible	The humidity monitoring table, to provides overall status of humidity.
isDeviceMonitorHumidityEntry	1.3.6.1.4.1.19011.1.3.2.1.3.1.2.1		not-accessible	The humidity monitoring table, to provides overall status of humidity.
INT isDeviceMonitorHumidityIndex	1.3.6.1.4.1.19011.1.3.2.1.3.1.2.1.1	INTEGER	read-only	The index to a humidity entry.
STR isDeviceMonitorHumidityName	1.3.6.1.4.1.19011.1.3.2.1.3.1.2.1.2	DisplayString	read-only	The humidity sensor name.
INT isDeviceMonitorHumidity	1.3.6.1.4.1.19011.1.3.2.1.3.1.2.1.3	INTEGER	read-only	The humidity of sensor on device Ispro, the unit is 0.01 %.
ISP isDeviceMonitorHumidityAlarm	1.3.6.1.4.1.19011.1.3.2.1.3.1.2.1.4	IsproEnuThresholdStatus	read-only	The status of humidity sensor in Ispro.
isDeviceMonitorDigitalInTable	1.3.6.1.4.1.19011.1.3.2.1.3.1.3		not-accessible	The digital input monitoring table, to provides overall status of digital input.
isDeviceMonitorDigitalInEntry	1.3.6.1.4.1.19011.1.3.2.1.3.1.3.1		not-accessible	The digital input monitoring table, to provides overall status of digital input.
INT isDeviceMonitorDigitalInIndex	1.3.6.1.4.1.19011.1.3.2.1.3.1.3.1.1	INTEGER	read-only	The index to a digital input entry.
STR isDeviceMonitorDigitalInName	1.3.6.1.4.1.19011.1.3.2.1.3.1.3.1.2	DisplayString	read-only	The digital input sensor name.
ISP isDeviceMonitorDigitalIn	1.3.6.1.4.1.19011.1.3.2.1.3.1.3.1.3	IsproEnuDigitalStatus	read-only	The digital input of sensor on device Ispro.
ISP isDeviceMonitorDigitalInAlarm	1.3.6.1.4.1.19011.1.3.2.1.3.1.3.1.4	IsproTriggerStatus	read-only	The status of digital alarm sensor.
isDeviceConfig	1.3.6.1.4.1.19011.1.3.2.1.3.2
isDeviceConfigTable	1.3.6.1.4.1.19011.1.3.2.1.3.2.1		not-accessible	The device configuration table.
isDeviceConfigEntry	1.3.6.1.4.1.19011.1.3.2.1.3.2.1.1		not-accessible	The device configuration table.
INT isDeviceConfigIndex	1.3.6.1.4.1.19011.1.3.2.1.3.2.1.1.1	INTEGER	read-only	The index to a sensor entry.
STR isDeviceConfigName	1.3.6.1.4.1.19011.1.3.2.1.3.2.1.1.2	DisplayString	read-write	The name of sensor device.
ISP isDeviceConfigState	1.3.6.1.4.1.19011.1.3.2.1.3.2.1.1.3	IsproEnuSensorState	read-write	The setup of device type.
ISP isDeviceConfigDisplay	1.3.6.1.4.1.19011.1.3.2.1.3.2.1.1.4	IsproEnuEnable	read-write	Enable or disable of displaying this sensor in Comprehensive webpage.
isDeviceConfigTemperatureTable	1.3.6.1.4.1.19011.1.3.2.1.3.2.2		not-accessible	The temperature configuration table of Device.
isDeviceConfigTemperatureEntry	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1		not-accessible	The sensor configuration table of Device.
INT isDeviceConfigTemperatureIndex	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.1	INTEGER	read-only	The index to a temperature device entry.
STR isDeviceConfigTemperatureName	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.2	DisplayString	read-write	The temperature sensor name.
INT isDeviceConfigTemperatureLowWarning	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.3	INTEGER	read-write	The set point to trigger low warning alarm. the unit is 0.01 degree.
INT isDeviceConfigTemperatureLowCritical	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.4	INTEGER	read-write	The threshold to trigger low critical alarm. the unit is 0.01 degree.
INT isDeviceConfigTemperatureHighWarning	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.5	INTEGER	read-write	The threshold to trigger high warning alarm. the unit is 0.01 degree.
INT isDeviceConfigTemperatureHighCritical	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.6	INTEGER	read-write	The threshold to trigger high critical alarm. the unit is 0.01 degree.
INT isDeviceConfigTemperatureHysteresis	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.7	INTEGER	read-write	The set value to prevent too many alarms when temperature is hovering around the set threshold. The unit is 0.01
ISP isDeviceConfigTemperatureCalibration	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.8	IsproEnuTempCalibration	read-write	The set value to get the correct temperature according to your reference temperature.
ISP isDeviceConfigTemperatureLowWarningState	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.9	IsproEnuEnable	read-write	Enable/disable the set point to trigger low warning alarm.
ISP isDeviceConfigTemperatureLowCriticalState	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.10	IsproEnuEnable	read-write	Enable/disable the set point to trigger low critical alarm.
ISP isDeviceConfigTemperatureHighWarningState	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.11	IsproEnuEnable	read-write	Enable/disable the set point to trigger high warning alarm.
ISP isDeviceConfigTemperatureHighCriticalState	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.12	IsproEnuEnable	read-write	Enable/disable the set point to trigger high critical alarm.
ISP isDeviceConfigTemperatureEventDO	1.3.6.1.4.1.19011.1.3.2.1.3.2.2.1.13	IsproEnuDO	read-write	Set the trigger action of temperature events. If event asserted, this will invert the digital output #1 or #2.
isDeviceConfigHumidityTable	1.3.6.1.4.1.19011.1.3.2.1.3.2.3		not-accessible	The humidity configuration table of Device.
isDeviceConfigHumidityEntry	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1		not-accessible	The humidity configuration table of Device.
INT isDeviceConfigHumidityIndex	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.1	INTEGER	read-only	The index to a humidity device entry.
STR isDeviceConfigHumidityName	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.2	DisplayString	read-write	The humidity sensor name.
INT isDeviceConfigHumidityLowWarning	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.3	INTEGER	read-write	The set point to trigger low warning alarm. the unit is 0.01 %.
INT isDeviceConfigHumidityLowCritical	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.4	INTEGER	read-write	The threshold to trigger low critical alarm. the unit is 0.01 %.
INT isDeviceConfigHumidityHighWarning	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.5	INTEGER	read-write	The threshold to trigger high warning alarm. the unit is 0.01 %.
INT isDeviceConfigHumidityHighCritical	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.6	INTEGER	read-write	The threshold to trigger high critical alarm. the unit is 0.01 %.
INT isDeviceConfigHumidityHysteresis	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.7	INTEGER	read-write	The set value to prevent too many alarms when Humidity is hovering around the set threshold. The unit is 0.01
ISP isDeviceConfigHumidityCalibration	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.8	IsproEnuHumidityCalibration	read-write	The set value to get the correct temperature according to your reference temperature.
ISP isDeviceConfigHumidityLowWarningState	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.9	IsproEnuEnable	read-write	Enable/disable the set point to trigger low warning alarm.
ISP isDeviceConfigHumidityLowCriticalState	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.10	IsproEnuEnable	read-write	Enable/disable the set point to trigger low critical alarm.
ISP isDeviceConfigHumidityHighWarningState	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.11	IsproEnuEnable	read-write	Enable/disable the set point to trigger high warning alarm.
ISP isDeviceConfigHumidityHighCriticalState	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.12	IsproEnuEnable	read-write	Enable/disable the set point to trigger high critical alarm.
ISP isDeviceConfigHumidityEventDO	1.3.6.1.4.1.19011.1.3.2.1.3.2.3.1.13	IsproEnuDO	read-write	Set the trigger action of humidity events. If event asserted, this will invert the digital output #1 or #2.
isDeviceConfigDigitalInTable	1.3.6.1.4.1.19011.1.3.2.1.3.2.4		not-accessible	The digital input configuration table of Device.
isDeviceConfigDigitalInEntry	1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1		not-accessible	The digital input configuration table of Device.
INT isDeviceConfigDigitalInIndex	1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1.1	INTEGER	read-only	The index to a digital input device entry.
STR isDeviceConfigDigitalInName	1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1.2	DisplayString	read-write	The name of digital input.
ISP isDeviceConfigDigitalInState	1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1.3	IsproEnuAlarmState	read-write	Setup the signal type to trigger alarm.
INT isDeviceConfigDigitalInHysteresis	1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1.4	INTEGER	read-write	The set value to delay the alarm triggered when event occurs.
ISP isDeviceConfigDigitalInEventDO	1.3.6.1.4.1.19011.1.3.2.1.3.2.4.1.5	IsproEnuDO	read-write	Set the trigger action of digital alarm #1 events. If event asserted, this will invert the digital output #1 or #2.
isDeviceDigitalOutTable	1.3.6.1.4.1.19011.1.3.2.1.3.2.5		not-accessible	The configuration table of Device digital output.
isDeviceDigitalOutEntry	1.3.6.1.4.1.19011.1.3.2.1.3.2.5.1		not-accessible	The configuration table of Device digital output.
INT isDeviceDigitalOutIndex	1.3.6.1.4.1.19011.1.3.2.1.3.2.5.1.1	INTEGER	read-only	The index is 1 and 2, it maps to digital output 1 and 2.
ISP isDeviceDigitalOutStartState	1.3.6.1.4.1.19011.1.3.2.1.3.2.5.1.2	IsproEnuOnOff	read-write	Turn power on/off specific digital output when system start up.
ISP isDeviceDigitalOutEventAction	1.3.6.1.4.1.19011.1.3.2.1.3.2.5.1.3	IsproEnuEnable	read-write	If select yes, it will invert the current status of specific digital output when Ispro event occurred.
ISP isDeviceDigitalOutManualControl	1.3.6.1.4.1.19011.1.3.2.1.3.2.5.1.4	IsproEnuTurnOnOff	read-write	Invert current status of specific digital output manually.
INT isDeviceID	1.3.6.1.4.1.19011.1.3.2.1.3.3	INTEGER	read-only	The device board id.
isTraps	1.3.6.1.4.1.19011.1.3.2.2
STR isTrapsDescription	1.3.6.1.4.1.19011.1.3.2.2.1	DisplayString	read-only	The description of current trap

RFC description

Jacarta InterSeptor Pro environmental monitoring system for data center facilities.

Start monitoring Jacarta webAppliance ISP management device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ISPRO-MIB

What Is ISPRO-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description