INTELCORPORATIONBASEBOARDRESOURCES-MIB

All MIBs › INTELCORPORATIONBASEBOARDRESOURCES-MIB

Category: Domain: Server Hardware, Vendor: Intel

Description: Intel Corporation baseboard resources MIB providing SNMP objects for CPU and memory resource utilization on Intel server platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is INTELCORPORATIONBASEBOARDRESOURCES-MIB?

INTELCORPORATIONBASEBOARDRESOURCES-MIB is part of the same Intel DMI/LANDesk Server Manager MIB family as the Baseboard2 and ServerHealth MIBs, focused on CPU and memory resource utilization on Intel server platforms. It exposes a system-resources table indexed per resource entry, alongside the shared componentid identity fields (manufacturer, product, version, serial number). It is used to monitor hardware resource utilization and allocation on the server baseboard, giving visibility into CPU/memory subsystem load that can reveal resource contention or capacity issues. It depends on the same Componentid/table conventions shared across the Intel server-management MIB family, tying resource data back to a specific identified baseboard. It is deployed on Intel-based servers running the Intel/LANDesk Server Manager agent, making INTELCORPORATIONBASEBOARDRESOURCES-MIB SNMP monitoring the mechanism operators rely on for baseboard CPU and memory resource visibility.

IPNetwork Monitor allows you to monitor SNMP objects defined in INTELCORPORATIONBASEBOARDRESOURCES-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Intel-based servers
Intel server motherboards

Monitoring Examples

An administrator would poll tSystemResources2/eSystemResources2, indexed by a41SystemResourcesIndex, to enumerate each reported system resource entry and its associated utilization on a given server baseboard. Cross-referencing this against a1Manufacturer/a1Product identifies exactly which server model is reporting the resource data. A sustained high value on a particular a41SystemResourcesIndex entry would flag a CPU or memory subsystem running near capacity on that Intel server.

What Can Be Monitored

system resource entries (CPU/memory)
resource utilization per indexed entry
baseboard identity and version

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
intel	1.3.6.1.4.1.343
products	1.3.6.1.4.1.343.2
server_products	1.3.6.1.4.1.343.2.6
platforms	1.3.6.1.4.1.343.2.6.2
resources	1.3.6.1.4.1.343.2.6.2.3
dmtfGroups	1.3.6.1.4.1.343.2.6.2.3.1
tComponentid	1.3.6.1.4.1.343.2.6.2.3.1.1		not-accessible	This group defines the attributes common to all components. This groupis required.
eComponentid	1.3.6.1.4.1.343.2.6.2.3.1.1.1		not-accessible
STR a1Manufacturer	1.3.6.1.4.1.343.2.6.2.3.1.1.1.1	DmiDisplaystring	read-only	Manufacturer of this system.
STR a1Product	1.3.6.1.4.1.343.2.6.2.3.1.1.1.2	DmiDisplaystring	read-only	Product name for this system.
STR a1Version	1.3.6.1.4.1.343.2.6.2.3.1.1.1.3	DmiDisplaystring	read-only	Version number of this system.
STR a1SerialNumber	1.3.6.1.4.1.343.2.6.2.3.1.1.1.4	DmiDisplaystring	read-only	Serial number for this system.
DMI a1Installation	1.3.6.1.4.1.343.2.6.2.3.1.1.1.5	DmiDateX	read-only	The time and date when this component was installed.
INT a1Verify	1.3.6.1.4.1.343.2.6.2.3.1.1.1.6	INTEGER	read-only	A code that provides a level of verification that the component is stillinstalled and working.
tSystemResources2	1.3.6.1.4.1.343.2.6.2.3.1.41		not-accessible	This group describes the base level of Memory, I/O, DMA, and INT(interrupt) resources that are used by a device in the system.
eSystemResources2	1.3.6.1.4.1.343.2.6.2.3.1.41.1		not-accessible
NUM a41SystemResourcesIndex	1.3.6.1.4.1.343.2.6.2.3.1.41.1.1	DmiInteger	read-only	A number that uniquely identifies the rows in this table.
NUM a41ResourceUser	1.3.6.1.4.1.343.2.6.2.3.1.41.1.2	DmiInteger	read-only	A unique number for each different 'resource user' that has resourcesspecified in this table.
NUM a41ResourceSet	1.3.6.1.4.1.343.2.6.2.3.1.41.1.3	DmiInteger	read-only	A number used as the ID of a set of Memory, I/O, DMA and/or INTresources for the resource user.
INT a41ResourceAssignment	1.3.6.1.4.1.343.2.6.2.3.1.41.1.4	INTEGER	read-only	Describes the state of the assignment of this set of resources. (Note: Thisvalue must be the same for all resources within a given set.)
INT a41ResourceType	1.3.6.1.4.1.343.2.6.2.3.1.41.1.5	INTEGER	read-only	The type of resource described by this row.
NUM a41ResourceNumber	1.3.6.1.4.1.343.2.6.2.3.1.41.1.6	DmiInteger	read-only	DMA or IRQ number - 0 for Memory and I/O ranges. This is theinterrupt or DMA number relative to the bus that the interrupt is sourced from.
NUM a41ResourceInfoId	1.3.6.1.4.1.343.2.6.2.3.1.41.1.7	DmiInteger	read-only	ID of the row in the 'Info' table for this type of system resource. E.g. ifthis Resource Type is 'I/O' then this would be an index into the 'System Resource I/OInfo' table.
NUM a41StartAddress	1.3.6.1.4.1.343.2.6.2.3.1.41.1.8	DmiInteger64X	read-only	Starting physical address for this memory range, or the minimum baseaddress if this attribute is being used to describe a programmable range. 0 for IRQ andDMA resources.
NUM a41EndAddress	1.3.6.1.4.1.343.2.6.2.3.1.41.1.9	DmiInteger64X	read-only	Ending physical address (address of last byte) for this memory range, orthe maximum configurable base address if this attribute is being used to describe aprogrammable range. 0 for IRQ and DMA resources.
NUM a41ResourceSize	1.3.6.1.4.1.343.2.6.2.3.1.41.1.10	DmiInteger	read-only	Number of consecutive bytes that a memory or I/O resource consumes. 0for IRQ and DMA resources.
NUM a41BaseAlignment	1.3.6.1.4.1.343.2.6.2.3.1.41.1.11	DmiInteger	read-only	Alignment of Start Address, in bytes. Indicates the granularity of theincrements in which a programmable range can be set.
INT a41Shareable	1.3.6.1.4.1.343.2.6.2.3.1.41.1.12	INTEGER	read-only	Indicates whether the resource is shareable.
INT a41Shared	1.3.6.1.4.1.343.2.6.2.3.1.41.1.13	INTEGER	read-only	Indicates whether this resource, or a portion of this resource, is sharedwith another device.
tSystemResourceDeviceInfo	1.3.6.1.4.1.343.2.6.2.3.1.42		not-accessible	This group describes the base level of Memory, I/O, DMA, and INT(interrupt) resources that are used by a device in the system.
eSystemResourceDeviceInfo	1.3.6.1.4.1.343.2.6.2.3.1.42.1		not-accessible
NUM a42ResourceUser	1.3.6.1.4.1.343.2.6.2.3.1.42.1.1	DmiInteger	read-only	A number that uniquely identifies this device. This number may bederived from the 'device number' that is assigned by 'Plug N Play', or may be uniquelyassigned by the component instrumentation.
NUM a42DeviceId	1.3.6.1.4.1.343.2.6.2.3.1.42.1.2	DmiInteger	read-only	Physical Device ID from Config manager info. Equal to theCISTPL_ ANFID field for PCMCIA devices. 0xFFFFFFFF = Unknown
NUM a42DeviceSerialNumber	1.3.6.1.4.1.343.2.6.2.3.1.42.1.3	DmiInteger	read-only	Device Serial Number from Config manager info. 0 = Undefined
NUM a42LogicalDeviceId_ClassCode	1.3.6.1.4.1.343.2.6.2.3.1.42.1.4	DmiInteger	read-only	Logical device ID for PnP ISA devices, Class code for PCI devices, CISTPL_FUNCID for PCMCIA devices. 0xFFFFFFFF = Undefined, 0 = reserved
NUM a42DeviceFlags	1.3.6.1.4.1.343.2.6.2.3.1.42.1.5	DmiInteger	read-only	Device flags from config manager info.Bit 0: 1 = device has been initializedBit 1: 1 = device is enabledBit 2: 1 = device config has been lockedBit 3: 1 = device has temporary config resources assignedBit 4: 1 = device is reconfigurable
NUM a42DeviceNumber	1.3.6.1.4.1.343.2.6.2.3.1.42.1.6	DmiInteger	read-only	Device Number for PCI Devices, Logical Device number for PnPDevices. 0 otherwise.
NUM a42FunctionNumber	1.3.6.1.4.1.343.2.6.2.3.1.42.1.7	DmiInteger	read-only	Function Number for PCI & EISA Devices. 0 otherwise.
NUM a42BusType	1.3.6.1.4.1.343.2.6.2.3.1.42.1.8	DmiInteger	read-only	Bus number (0-255) for PCI Devices, Slot number for EISA and PnPDevices, Card logical socket number for PCMCIA devices. Zero otherwise.
NUM a42CmReserved	1.3.6.1.4.1.343.2.6.2.3.1.42.1.9	DmiInteger	read-only	Data from the Reserved field of the Configuration Manager bus accessstructure, or 0.
tSystemResourceMemoryInfo	1.3.6.1.4.1.343.2.6.2.3.1.43		not-accessible	This group presents additional information about memory resource thathave been defined in the System Resources table.
eSystemResourceMemoryInfo	1.3.6.1.4.1.343.2.6.2.3.1.43.1		not-accessible
NUM a43SystemResourceMemoryInfoIndex	1.3.6.1.4.1.343.2.6.2.3.1.43.1.1	DmiInteger	read-only	A number the uniquely identifies rows in this table.
INT a43IsapcmciaRangeDescriptor	1.3.6.1.4.1.343.2.6.2.3.1.43.1.2	INTEGER	read-only	For PnP ISA/PCMCIA memory range descriptor compatibility.
INT a43EisaRangeDescriptor	1.3.6.1.4.1.343.2.6.2.3.1.43.1.3	INTEGER	read-only	For PnP EISA memory range descriptor compatibility.
INT a43DecodeSupport	1.3.6.1.4.1.343.2.6.2.3.1.43.1.4	INTEGER	read-only	For PnP memory range descriptor compatibility.
INT a43Cacheable	1.3.6.1.4.1.343.2.6.2.3.1.43.1.5	INTEGER	read-only	Indicates whether it is allowable for this memory range to be cached ornot.
INT a43CacheType	1.3.6.1.4.1.343.2.6.2.3.1.43.1.6	INTEGER	read-only	Indicates Cache Type that is compatible with this resource.
INT a43Read_write	1.3.6.1.4.1.343.2.6.2.3.1.43.1.7	INTEGER	read-only	Indicates the read-write accessibility of this memory resource.
tSystemResourceIoInfo	1.3.6.1.4.1.343.2.6.2.3.1.44		not-accessible	This group presents additional information about I/O resources that havebeen defined in the System Resources table.
eSystemResourceIoInfo	1.3.6.1.4.1.343.2.6.2.3.1.44.1		not-accessible
NUM a44SystemResourceIoInfoIndex	1.3.6.1.4.1.343.2.6.2.3.1.44.1.1	DmiInteger	read-only	A number the uniquely identifies rows in this table.
INT a44IoDecode	1.3.6.1.4.1.343.2.6.2.3.1.44.1.2	INTEGER	read-only	Number of bits used for I/O decode
tSystemResourceIrqInfo	1.3.6.1.4.1.343.2.6.2.3.1.45		not-accessible	This group presents additional information about I/O resources that havebeen defined in the System Resources table.
eSystemResourceIrqInfo	1.3.6.1.4.1.343.2.6.2.3.1.45.1		not-accessible
NUM a45SystemResourceIrqInfoIndex	1.3.6.1.4.1.343.2.6.2.3.1.45.1.1	DmiInteger	read-only	A number the uniquely identifies rows in this table.
INT a45TriggerType	1.3.6.1.4.1.343.2.6.2.3.1.45.1.2	INTEGER	read-only	The trigger type for this interrupt.
INT a45TriggerLevel	1.3.6.1.4.1.343.2.6.2.3.1.45.1.3	INTEGER	read-only	The trigger level for this interrupt.
tSystemResourceDmaInfo	1.3.6.1.4.1.343.2.6.2.3.1.46		not-accessible	This group presents additional information about DMA resources thathave been defined in the System Resources table.
eSystemResourceDmaInfo	1.3.6.1.4.1.343.2.6.2.3.1.46.1		not-accessible
NUM a46SystemResourceDmaInfoIndex	1.3.6.1.4.1.343.2.6.2.3.1.46.1.1	DmiInteger	read-only	A number the uniquely identifies rows in this table.
INT a46DmaTransferWidth	1.3.6.1.4.1.343.2.6.2.3.1.46.1.2	INTEGER	read-only	Width of DMA transfers supported
INT a46DmaAddressSize	1.3.6.1.4.1.343.2.6.2.3.1.46.1.3	INTEGER	read-only	The width of the DMA address.
NUM a46DmaMaximumTransferSize	1.3.6.1.4.1.343.2.6.2.3.1.46.1.4	DmiInteger	read-only	The maximum number of bytes that can be transferred by thisDMA Channel.
INT a46DmaTransferPreference	1.3.6.1.4.1.343.2.6.2.3.1.46.1.5	INTEGER	read-only	DMA transfer type preference.
INT a46BusMaster	1.3.6.1.4.1.343.2.6.2.3.1.46.1.6	INTEGER	read-only	Indicates whether the device is using DMA is a bus master.
INT a46ByteMode	1.3.6.1.4.1.343.2.6.2.3.1.46.1.7	INTEGER	read-only	Indicates whether DMA may execute in 'count by byte' mode.
INT a46WordMode	1.3.6.1.4.1.343.2.6.2.3.1.46.1.8	INTEGER	read-only	Indicates whether DMA may execute in 'count by word' mode.
INT a46ChannelTiming	1.3.6.1.4.1.343.2.6.2.3.1.46.1.9	INTEGER	read-only	DMA channel speed support.
INT a46Type_cTiming	1.3.6.1.4.1.343.2.6.2.3.1.46.1.10	INTEGER	read-only	Indicates whether C type (burst) timing is supported.
tMiftomib	1.3.6.1.4.1.343.2.6.2.3.1.1001		not-accessible	This group defines attributes required for DMI to SNMP translati n.
eMiftomib	1.3.6.1.4.1.343.2.6.2.3.1.1001.1		not-accessible
STR a1001MibName	1.3.6.1.4.1.343.2.6.2.3.1.1001.1.1	DmiDisplaystring	read-only	The MIB name that defines this MIF
STR a1001MibOid	1.3.6.1.4.1.343.2.6.2.3.1.1001.1.2	DmiDisplaystring	read-only	The MIB Object Identifier that corresponds to this MIF
NUM a1001DisableTrap	1.3.6.1.4.1.343.2.6.2.3.1.1001.1.3	DmiInteger	read-write	This attribute can be changed to disable sending oftraps from this component

RFC description

Intel server baseboard resources MIB providing system resource information for DMI components.

Start monitoring Intel server baseboard (CPU/memory resource utilization) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download INTELCORPORATIONBASEBOARDRESOURCES-MIB

What Is INTELCORPORATIONBASEBOARDRESOURCES-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description