INTEL-ES480-SYSTEM-MIB

All MIBs › INTEL-ES480-SYSTEM-MIB

Organization: Intel

Last Updated: 2000-02-14

Category: Vendor: Intel

Description: Intel Express 480T switch system MIB providing SNMP objects for chassis, fans, power supply, and firmware management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is INTEL-ES480-SYSTEM-MIB?

INTEL-ES480-SYSTEM-MIB is a vendor-specific MIB providing chassis-level system objects for Intel's Express 480T stackable Ethernet switch. It exposes chassis/hardware inventory information along with fan and power supply status and firmware/software version details for the switch. Its purpose is explicitly hardware-health monitoring: fan operational status and power supply presence/failure are core physical health indicators, and firmware version tracking supports software-level status checks across a stack of units. It shares the Intel enterprise OID tree with the companion INTEL-ES480-QOS-MIB, both describing the same physical device from different angles. It is deployed on Intel Express 480T switches in wiring closets and data centers where physical chassis health needs to be monitored, often after administrators complete an INTEL-ES480-SYSTEM-MIB download to load the module into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in INTEL-ES480-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Intel Express 480T stackable Ethernet switch chassis

Monitoring Examples

Following the standard Intel ES480T system convention, an admin would poll chassis/fan/power-supply status tables to confirm all fans are spinning and that redundant power supplies are present and functioning, alongside a firmware/software version object used to track code levels consistently across a stack; a reported fan or power-supply failure would prompt immediate physical inspection.

What Can Be Monitored

fan operational status
power supply status
chassis/firmware version
system uptime
chassis inventory/model information

Imported Objects

From INTEL-ES480-MIB

es480tAgent

OBJECT-IDENTITY

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
es480tSystem	1.3.6.1.4.1.343.6.60.1			Intel es480t system objects.
INT es480tSaveConfiguration	1.3.6.1.4.1.343.6.60.1.3	INTEGER	read-write	When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value of the object. The save is performed asynchronously, and the snmp agent will continue to respond to both gets and sets while the save is taking place. A network management application may use the intelSaveStatus object to determine when the asynchronous save operation has completed.
INT es480tSaveStatus	1.3.6.1.4.1.343.6.60.1.4	INTEGER	read-only	This object will return the status of a save operation invoked by setting the intelSaveConfiguration object. A network management application can read this object to determine that a save operation has completed.
INT es480tCurrentConfigInUse	1.3.6.1.4.1.343.6.60.1.5	INTEGER	read-only	Shows which NVRAM configuration store was used at last boot
INT es480tConfigToUseOnReboot	1.3.6.1.4.1.343.6.60.1.6	INTEGER	read-write	Controls which NVRAM configuration store will be used on next reboot.
T/F es480tOverTemperatureAlarm	1.3.6.1.4.1.343.6.60.1.7	TruthValue	read-only	Alarm status of overtemperature sensor in device enclosure.
INT es480tCurrentTemperature	1.3.6.1.4.1.343.6.60.1.8	INTEGER	read-only	Current temperature in degrees celcius measured inside device enclosure.
es480tFanStatusTable	1.3.6.1.4.1.343.6.60.1.9		not-accessible	Table of operational status of all internal cooling fans.
es480tFanStatusEntry	1.3.6.1.4.1.343.6.60.1.9.1		not-accessible	Entry in table of all internal cooling fans.
INT es480tFanNumber	1.3.6.1.4.1.343.6.60.1.9.1.1	INTEGER	read-only	Identifier of cooling fan, numbered from the front and/or left side of device.
T/F es480tFanOperational	1.3.6.1.4.1.343.6.60.1.9.1.2	TruthValue	read-only	Operational status of a cooling fan.
T/F es480tPrimaryPowerOperational	1.3.6.1.4.1.343.6.60.1.10	TruthValue	read-only	Operational status of internal power supply of a device.
INT es480tRedundantPowerStatus	1.3.6.1.4.1.343.6.60.1.11	INTEGER	read-only	Operational status of an external redundant power supply to a device.
T/F es480tRedundantPowerAlarm	1.3.6.1.4.1.343.6.60.1.12	TruthValue	read-only	Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition.
STR es480tPrimarySoftwareRev	1.3.6.1.4.1.343.6.60.1.13	DisplayString	read-only	The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device.
STR es480tSecondarySoftwareRev	1.3.6.1.4.1.343.6.60.1.14	DisplayString	read-only	The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device.
INT es480tImageToUseOnReboot	1.3.6.1.4.1.343.6.60.1.15	INTEGER	read-write	Controls which image will be used on next reboot.
STR es480tSystemID	1.3.6.1.4.1.343.6.60.1.16	DisplayString	read-only	This represents the System ID of the Summit Switch.
STR es480tSystemBoardID	1.3.6.1.4.1.343.6.60.1.17	DisplayString	read-only	This represents the Board ID of the Summit Switch.
STR es480tSystemLeftBoardID	1.3.6.1.4.1.343.6.60.1.18	DisplayString	read-only	This represents the Left Board ID of the Summit Switch.
STR es480tSystemRightBoardID	1.3.6.1.4.1.343.6.60.1.19	DisplayString	read-only	This represents the Right Board ID of the Summit Switch.
INT es480tInputPowerVoltage	1.3.6.1.4.1.343.6.60.1.20	INTEGER	read-only	The input power voltage at which the system is currently operating.
INT es480tPowerStatus	1.3.6.1.4.1.343.6.60.1.21	INTEGER	read-only	Operational status of the power supply to a device.
T/F es480tPowerAlarm	1.3.6.1.4.1.343.6.60.1.22	TruthValue	read-only	Alarm state of the power supply to a device. Alarm state indicates either fan failure or overtemperature condition.
T/F es480tRmonEnable	1.3.6.1.4.1.343.6.60.1.23	TruthValue	read-write	Setting this to true will cause the agent to start collecting RMON statistics.

RFC description

System configuration and control objects for Intel ES480t switches including NVRAM save and boot parameters.

Start monitoring Intel Ethernet switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download INTEL-ES480-SYSTEM-MIB

What Is INTEL-ES480-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description