| OID symbolic | OID numeric | Type | Access | Description |
|---|
| STR bladeBiosVersion | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.11 | DisplayString | read-only | Textual BIOS Version of this blade. |
| STR bladeBmcFirmwareVersion | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.9 | DisplayString | read-only | Textual BMC Version of this blade. |
| STR bladeBootBlockVersion | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.10 | DisplayString | read-only | Textual Boot Block Version of this blade. |
| U32 bladeBootCount | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.14 | Unsigned32 | read-only | Number of times the blade has booted (since manufactured
or NVRAM cleared)
Will be 0 if unknown (e.g., blade hasn't been powered on
at least once since insertion, blade not present, etc.). |
| INT bladeConsoleRedirection | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.12 | INTEGER | read-only | Console redirection configuration within BIOS |
| bladeEntry | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1 | | not-accessible | Individual blade entry |
| FAU bladeFaultLed | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.7 | FaultLedStates | read-only | State of the Fault LED on the Blade |
| IDR bladeFruAssetTag | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1.10 | IdromBinary16 | read-only | Asset Tag # of device |
| STR bladeFruDeviceName | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1.5 | DisplayString | read-only | Device Name |
| bladeFruEntry | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1 | | not-accessible | blade & SubFRU common information. |
| POW bladeFruMaximumPower | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1.8 | Power | read-only | Static maximum power generation / consumption (in watts):
0 - Positive numbers indicate device generates power (in watts)
0 - Device is passive (does not not consume or generate power)
0xffff - Maximum power generation/consumption not known or specified |
| STR bladeFruMfgDate | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1.4 | DisplayString | read-only | Manufacture date/time |
| POW bladeFruNominalPower | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1.9 | Power | read-only | Static Nominal power generation / consumption (in watts):
0 - Positive numbers indicate device generates power (in watts)
0 - Device is passive (does not not consume or generate power)
0xffff - Nominal power generation/consumption not known or specified |
| IDR bladeFruPart | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1.6 | IdromBinary16 | read-only | Device Part Number |
| PRE bladeFruPresence | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1.2 | Presence | read-only | column used to flag the existence of a particular FRU |
| STR bladeFruPresenceMask | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.5 | DisplayString | read-only | ASCII representation of bit string reflecting the presence
of the FRUs with the left most 'bit' being bit 1 and
maxFrus bits being represented.
bit 1 - blade, itself
bit 2 - mez card
Thus, '10' would express that the blade is present, but
does not have a Mez card
When indeterminate, the string will be empty |
| IDR bladeFruSerialNo | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1.7 | IdromBinary16 | read-only | Device Serial Number |
| bladeFruTable | 1.3.6.1.4.1.343.2.19.1.2.10.202.2 | | not-accessible | Each row describes a FRU associated with (and including)
a Blade in the chassis
There will always be 2 FRU entries for every blade (with
the presence field marking whether marking whether the rest
of the row is relevant).
Thus, the presence can be queried of all FRUs regardless of
their being present. |
| INT bladeFruType | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1.1 | INTEGER | read-only | column used to identify a particular FRU.
FRU 1 is the blade, itself, FRU 2 is the mezzanine card |
| STR bladeFruVendor | 1.3.6.1.4.1.343.2.19.1.2.10.202.2.1.3 | DisplayString | read-only | Device manufacturer |
| bladeGroup | 1.3.6.1.4.1.343.2.19.1.2.2.2.12 | | | Description. |
| INT bladeLegacyOsRedirection | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.13 | INTEGER | read-only | Legacy OS Redirection configuration within BIOS |
| STR bladeMemAssetTag | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.14 | DisplayString | read-only | Asset Tag of this memory device |
| STR bladeMemBank | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.8 | DisplayString | read-only | String that identifies the physically labeled bank where
where the memory device is located |
| INT bladeMemDataWidth | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.2 | INTEGER | read-only | The data width, in bits, of this memory device. If 0 and
bladeMemTotalWidth is 8 indicates that the device is being
used solely to provide 8 error-correction bits. If the
width is unknown, the field is set to -1. |
| INT bladeMemDeviceSet | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.6 | INTEGER | read-only | Identifies when the Memory Device is one of a set of
Memory Devices that must be populated with all devices of
the same type and size and the set to which this device
belongs. A value of 0 indicates that the device is not
part of a set; a value of -1 indicates that the attribute
is unknown. |
| INT bladeMemFormFactor | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.5 | INTEGER | read-only | The implementation form factor for this memory device. |
| INT bladeMemGranularity | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.4 | INTEGER | read-only | The granularity of the bladeMemSize |
| STR bladeMemLocation | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.7 | DisplayString | read-only | String that identifies the physically labeled socket or
board position where the memory device is located |
| STR bladeMemManufacturer | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.12 | DisplayString | read-only | Manufacturer of this memory device |
| bladeMemoryEntry | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1 | | not-accessible | Overall memory device per blade information |
| bladeMemorySummaryEntry | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1 | | not-accessible | Overall memory configuration summary per blade information |
| bladeMemorySummaryTable | 1.3.6.1.4.1.343.2.19.1.2.10.202.5 | | not-accessible | Each row describes the overall summary of the memory
configuration for a given blade in the chassis as described
by the blades SMBIOS entries.
For future compatibility, this table is sparsely populate
based on the presence of the blade, and the availability of
the SMBIOS from the blade (e.g., a blade may be present,
but if it never has powered on, or there is a
communications error to the BMC, it may not be displayed) |
| bladeMemoryTable | 1.3.6.1.4.1.343.2.19.1.2.10.202.6 | | not-accessible | Each row describes an individual memory device for system
memory given a specific blade in the chassis as described
by the blades SMBIOS entries.
For future compatibility, this table is sparsely populate
based on the presence of the blade, and the availability of
the SMBIOS from the blade (e.g., a blade may be present,
but if it never has powered on, or there is a
communications error to the BMC, it may not be displayed) |
| STR bladeMemPart | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.15 | DisplayString | read-only | Part Number of this memory device |
| STR bladeMemSerialNo | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.13 | DisplayString | read-only | Serial Number of this memory device |
| INT bladeMemSize | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.3 | INTEGER | read-only | The size of the memory device. If the value is 0, no
memory device is installed in the socket (shouldn't occur
as the table is sparsely populated); if the size is
unknown, the field value is -1. |
| INT bladeMemSpeed | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.11 | INTEGER | read-only | Identifies the speed of the device in megahertz (MHz). |
| INT bladeMemTotalWidth | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.1 | INTEGER | read-only | The total width, in bits, of this memory device, including
any check or error-correction bits. If there are no
error-correction bits, this value should be equal to
bladeMemDataWidth. If the width is unknown, the field is
set to -1. |
| INT bladeMemType | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.9 | INTEGER | read-only | The type of memory used in this device |
| BIT bladeMemTypeDetail | 1.3.6.1.4.1.343.2.19.1.2.10.202.6.1.10 | Bits | read-only | The type of memory used in this device |
| U32 bladeMSCapacity | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.3 | Unsigned32 | read-only | The maximum memory capacity in MB for this array. |
| U32 bladeMSDisabledSize | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.7 | Unsigned32 | read-only | Total size in MB of all disabled memory |
| U32 bladeMSEffectiveSize | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.5 | Unsigned32 | read-only | Memory available after deducting for failed and redundant
memory units |
| INT bladeMSErrorCorrection | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.11 | INTEGER | read-only | The primary hardware error correction or detection
method supported |
| I32 bladeMSMaxDevices | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.1 | Integer32 | read-only | The number of slots or sockets available for Memory
Devices on the board. |
| U32 bladeMSNumFailed | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.6 | Unsigned32 | read-only | Total Number of failed memory devices |
| I32 bladeMSNumOfDevices | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.2 | Integer32 | read-only | The number of slots or sockets populated with Memory
Devices on the board. |
| INT bladeMSRasConfiguration | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.10 | INTEGER | read-only | RAS Configuration Possible |
| INT bladeMSRasPossible | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.9 | INTEGER | read-only | RAS Configuration Possible |
| U32 bladeMSSpareSize | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.8 | Unsigned32 | read-only | Total size in MB of all spare memory (see
bladeMSRasPossible & bladeMSRasConfiguration columns) |
| U32 bladeMSTotalSize | 1.3.6.1.4.1.343.2.19.1.2.10.202.5.1.4 | Unsigned32 | read-only | Total size in MB of all memory physically installed |
| MAC bladeNic | 1.3.6.1.4.1.343.2.19.1.2.10.202.3.1.1 | MacAddress | read-only | NIC associated with blade (both onboard and optional
Mezzanine card) as found within the SMBIOS data for the
blade |
| bladeNicEntry | 1.3.6.1.4.1.343.2.19.1.2.10.202.3.1 | | not-accessible | Overall NIC information per blade information |
| bladeNicTable | 1.3.6.1.4.1.343.2.19.1.2.10.202.3 | | not-accessible | Each row describes a NIC associated with a blade from the
system memory as described by the blades SMBIOS entries.
For future compatibility, this table is sparsely populate
based on the presence of the blade, and the availability of
the SMBIOS from the blade (e.g., a blade may be present,
but if it never has powered on, or there is a
communications error to the BMC, it may not be displayed) |
| POW bladePowerLed | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.6 | PowerLedStates | read-write | State of the Power LED on the Blade (and optionally power
control blade) |
| PRE bladePresence | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.2 | Presence | read-only | column used to flag the existence of a particular FRU |
| PRE bladePresenceLed | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.8 | PresenceLedStates | read-write | State of the Presence LED on the Blade (and optionally
intiate identification) |
| STR bladePresenceMask | 1.3.6.1.4.1.343.2.19.1.2.10.32 | DisplayString | read-only | ASCII representation of bit string reflecting the presence
of the blades with the left most 'bit' being bit 1 and
maxBlades bits being represented.
Thus, '010011' would express that blades 2, 5, & 6 (of six
blades) are present |
| STR bladeProcessorAssetTag | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.15 | DisplayString | read-only | SMBIOS string of the asset tag of this processor. |
| bladeProcessorEntry | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1 | | not-accessible | Processor(s) per blade information |
| U32 bladeProcessorExtClock | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.10 | Unsigned32 | read-only | SMBIOS value of the External Clock Frequency, in MHZ. If
the value is unknown, the field is set to 0 |
| STR bladeProcessorFamily | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.5 | DisplayString | read-only | String representing SMBIOS data for the processor family type |
| STR bladeProcessorID | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.7 | DisplayString | read-only | SMBIOS string containing the Processor ID field which
contains processor-specific information that describes the
processor's features. |
| STR bladeProcessorManufacturer | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.6 | DisplayString | read-only | String representing SMBIOS data for the Manufacturer of the Processor |
| U32 bladeProcessorMaxSpeed | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.11 | Unsigned32 | read-only | SMBIOS value of the Maximum processor speed (in MHz)
supported by the system for this processor socket. If the
value is unknown, the field is set to 0.
Note: This field identifies a capability for the system,
not the processor itself. |
| STR bladeProcessorPartNo | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.16 | DisplayString | read-only | SMBIOS string of the part number of this processor.
This value is set by the manufactureer and normally not
changeable. |
| PRE bladeProcessorPresence | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.3 | Presence | read-only | column used to flag the existence of a particular CPU |
| STR bladeProcessorSerialNo | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.14 | DisplayString | read-only | SMBIOS string of the serial number of this processor.
This value is set by the manufactureer and normally not
changeable. |
| STR bladeProcessorSocket | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.2 | DisplayString | read-only | String returned by SMBIOS designating the socket location
of the CPU for the indexed blade.
The string is returned by the BIOS and is arbitrary as
determined by the vendor. Thus it could be J202, or CPU2.
Regardless, it will be unqiue in it's designation for a
blade. |
| STR bladeProcessorStatus | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.12 | DisplayString | read-only | String representing SMBIOS data describing CPU status
information |
| bladeProcessorTable | 1.3.6.1.4.1.343.2.19.1.2.10.202.4 | | not-accessible | Each row describes a Processor associated with a Blade in
the chassis as described by the blades SMBIOS entries.
As there are multiple Processors available per blade, there
are two indices associated with this table. One for the
blade, the other for the Processor in question.
Although the blade is associated by slot within the chassis
and is easily made a numeric value, the processor is less
reliable. Although initial boards return via the BIOS the
form 'CPU#', this is not required by the SMBIOS
specification (it could be J2341). Thus, the SMBIOS handle
associated with the processor is used so that cross
referencing is more straight forward (e.g., when listing L
caches associated with processors).
For future compatibility, this table is sparsely populate
based on the presence of the blade, and the availability of
the SMBIOS from the blade (e.g., a blade may be present,
but if it never has powered on, or there is a
communications error to the BMC, it may not be displayed) |
| STR bladeProcessorType | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.4 | DisplayString | read-only | SMBIOS string representing type of Processor in this slot |
| STR bladeProcessorUpgrade | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.13 | DisplayString | read-only | String representing SMBIOS data describing the CPU
'Upgrade' or how the processor is located on the blade |
| STR bladeProcessorVersion | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.8 | DisplayString | read-only | String representing SMBIOS data describing the Processor |
| STR bladeProcessorVoltage | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.9 | DisplayString | read-only | SMBIOS string representing the voltage(s) the processor is
capable of |
| blades | 1.3.6.1.4.1.343.2.19.1.2.10.202 | | | Container for Blade specific information as well as all
components logically contained within. |
| IND bladeSlotId | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.1 | Index | read-only | Slot number which the blade current occupies
(or would occupy). |
| bladeTable | 1.3.6.1.4.1.343.2.19.1.2.10.202.1 | | not-accessible | Each row describes a Blade in the chassis.
Note, all blade rows possible for a chassis are present so
that the presence field is accessible even when the blade is
not. |
| IND handle | 1.3.6.1.4.1.343.2.19.1.2.10.202.4.1.1 | Index | not-accessible | Unique handle within the SMBIOS table for a specific blade
which lays out the assorted record types. |
| U32 maxBlades | 1.3.6.1.4.1.343.2.19.1.2.10.12 | Unsigned32 | read-only | Maximum number of Blades possible in this chassis. |
| NUM maxFrus | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.3 | INT32withException | read-only | Given a board, the Maximum number of FRUs for this board.
This parameter is related to the bladeFruPresenceMask as it
defines the number of FRUs to be represented (whether they
are present or not) |
| multiFlexServerBladesMibModule | 1.3.6.1.4.1.343.2.19.1.1.1.12 | | | Blade Module of the Multi-Flex Server |
| I32 numOfBlades | 1.3.6.1.4.1.343.2.19.1.2.10.22 | Integer32 | read-only | The number of Blades in the system. |
| NUM numOfFrus | 1.3.6.1.4.1.343.2.19.1.2.10.202.1.1.4 | INT32withException | read-only | The number FRUs present on the board |
