INTEL-PPP-MIB

All MIBs › INTEL-PPP-MIB

Category: Protocol: PPP, Vendor: Intel

Description: Intel Point-to-Point Protocol MIB providing SNMP objects for PPP link configuration, authentication, and compression settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is INTEL-PPP-MIB?

INTEL-PPP-MIB is an Intel MIB for monitoring Point-to-Point Protocol (PPP) link negotiation state on Intel networking equipment, covering the family of control protocols layered over PPP. It exposes per-interface negotiation state for LCP (Link Control Protocol), IPCP, IPXCP, BCP (bridging), CCP (compression), ECP (encryption), and BACP (bandwidth allocation). It is used to monitor the software/protocol status of WAN links, since a stuck or failed negotiation state on any of these sub-protocols directly explains why a dial-up or leased-line connection isn't passing traffic. It complements the standard IETF PPP MIB family (RFC 1471-1474 series) and shares interface indexing conventions with IF-MIB. It is deployed on Intel WAN routers/access devices that terminate PPP links, used to diagnose connectivity problems at the protocol-negotiation layer. Engineers can download the INTEL-PPP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in INTEL-PPP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Intel WAN/dial-up routers (PPP-capable devices)

Monitoring Examples

For a WAN interface identified by pppLinkProtoStateIfIndex in pppLinkProtoStateTable, an administrator would poll pppLinkProtoStateLcpState to confirm the link control protocol reached an "opened" state. If pppLinkProtoStateIpcpState remains stuck negotiating while LCP is open, that points to an IP-layer configuration mismatch between the two PPP peers. pppLinkProtoStateCcpState and pppLinkProtoStateEcpState reveal whether compression or encryption negotiation succeeded, which would explain reduced throughput or a failed secure link.

What Can Be Monitored

PPP link type per interface
LCP negotiation state
IPCP/IPXCP negotiation state
bridging (BCP) state
compression (CCP) state
encryption (ECP) and bandwidth allocation (BACP) state

Imported Objects

From INTEL-GEN-MIB

mib2ext

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
ppp	1.3.6.1.4.1.343.6.23
pppLink	1.3.6.1.4.1.343.6.23.1
pppLinkProtoStateTable	1.3.6.1.4.1.343.6.23.1.1		not-accessible	Table containing protocol states and link type (standard, multilink slave or multilink master).
pppLinkProtoStateEntry	1.3.6.1.4.1.343.6.23.1.1.1		not-accessible
INT pppLinkProtoStateIfIndex	1.3.6.1.4.1.343.6.23.1.1.1.1	INTEGER	read-only	Interface index.
INT pppLinkProtoStatePppLinkType	1.3.6.1.4.1.343.6.23.1.1.1.2	INTEGER	read-only	PPP Link type.
PPP pppLinkProtoStateLcpState	1.3.6.1.4.1.343.6.23.1.1.1.3	PppProtocolState	read-only	LCP (Link Control Protocol) state.
PPP pppLinkProtoStateIpcpState	1.3.6.1.4.1.343.6.23.1.1.1.4	PppProtocolState	read-only	IPCP (Ip Control Protocol) state. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave).
PPP pppLinkProtoStateIpxcpState	1.3.6.1.4.1.343.6.23.1.1.1.5	PppProtocolState	read-only	IPXCP (Ipx Control Protocol) state. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave).
PPP pppLinkProtoStateBcpState	1.3.6.1.4.1.343.6.23.1.1.1.6	PppProtocolState	read-only	BCP (Bridging Control Protocol) state. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave).
PPP pppLinkProtoStateCcpState	1.3.6.1.4.1.343.6.23.1.1.1.7	PppProtocolState	read-only	CCP (Compression Control Protocol) state. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave).
PPP pppLinkProtoStateEcpState	1.3.6.1.4.1.343.6.23.1.1.1.8	PppProtocolState	read-only	ECP (Encryption Control Protocol) state. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave).
PPP pppLinkProtoStateBacpState	1.3.6.1.4.1.343.6.23.1.1.1.9	PppProtocolState	read-only	BACP (Bandwidth Allocation Control Protocol) state. Only used for multilink master links (pppLinkProtoStatePppLinkType = multilinkmaster).
pppLinkLcpTable	1.3.6.1.4.1.343.6.23.1.2		not-accessible	LCP (Link Control Protocol) information table. Values are first valid when protocol has state OPENED. Not used for multilink master links (pppLinkProtoStatePppLinkType = multilinkmaster).
pppLinkLcpEntry	1.3.6.1.4.1.343.6.23.1.2.1		not-accessible
INT pppLinkLcpIfIndex	1.3.6.1.4.1.343.6.23.1.2.1.1	INTEGER	read-only	Interface index
INT pppLinkLcpMRUInc	1.3.6.1.4.1.343.6.23.1.2.1.2	INTEGER	read-only	Local Maximum Receive Unit
INT pppLinkLcpMRUOut	1.3.6.1.4.1.343.6.23.1.2.1.3	INTEGER	read-only	Remote Maximum Receive Unit
INT pppLinkLcpACCMapInc	1.3.6.1.4.1.343.6.23.1.2.1.4	INTEGER	read-only	Local to peer ACCM map
INT pppLinkLcpACCMapOut	1.3.6.1.4.1.343.6.23.1.2.1.5	INTEGER	read-only	Peer to local ACCM map
INT pppLinkProtocolCompressionInc	1.3.6.1.4.1.343.6.23.1.2.1.6	INTEGER	read-only	Local to remote protocol field compression
INT pppLinkProtocolCompressionOut	1.3.6.1.4.1.343.6.23.1.2.1.7	INTEGER	read-only	Remote to local protocol field compression
INT pppLinkACCompressionInc	1.3.6.1.4.1.343.6.23.1.2.1.8	INTEGER	read-only	Local to remote address and control field compression
INT pppLinkACCompressionOut	1.3.6.1.4.1.343.6.23.1.2.1.9	INTEGER	read-only	Remote to local address and control field compression
INT pppLinkMagicNumberInc	1.3.6.1.4.1.343.6.23.1.2.1.10	INTEGER	read-only	Local magic number
INT pppLinkMagicNumberOut	1.3.6.1.4.1.343.6.23.1.2.1.11	INTEGER	read-only	Remote magic number
INT pppLinkLinkDiscriminatorInc	1.3.6.1.4.1.343.6.23.1.2.1.12	INTEGER	read-only	Local link discriminator
INT pppLinkLinkDiscriminatorOut	1.3.6.1.4.1.343.6.23.1.2.1.13	INTEGER	read-only	Remote link discriminator
pppLinkBcpTable	1.3.6.1.4.1.343.6.23.1.3		not-accessible	BCP (Bridging Control Protocol) information table. Values are first valid when protocol has state OPENED. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave).
pppLinkBcpEntry	1.3.6.1.4.1.343.6.23.1.3.1		not-accessible
INT pppLinkBcpIfIndex	1.3.6.1.4.1.343.6.23.1.3.1.1	INTEGER	read-only	Interface index
INT pppLinkBcpMACTypeInc	1.3.6.1.4.1.343.6.23.1.3.1.2	INTEGER	read-only	Frame type (incoming)
INT pppLinkBcpMACTypeOut	1.3.6.1.4.1.343.6.23.1.3.1.3	INTEGER	read-only	Frame type (outgoing)
INT pppLinkBcpBridgingProtInc	1.3.6.1.4.1.343.6.23.1.3.1.4	INTEGER	read-only	Bridging protocol used (incoming).
INT pppLinkBcpBridgingProtOut	1.3.6.1.4.1.343.6.23.1.3.1.5	INTEGER	read-only	Bridging protocol used (outgoing).
pppLinkCcpTable	1.3.6.1.4.1.343.6.23.1.4		not-accessible	CCP (Compression Control Protocol) information table. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave).
pppLinkCcpEntry	1.3.6.1.4.1.343.6.23.1.4.1		not-accessible
INT pppLinkCcpIfIndex	1.3.6.1.4.1.343.6.23.1.4.1.1	INTEGER	read-only	Interface index.
INT pppLinkCcpHistorySizeIncoming	1.3.6.1.4.1.343.6.23.1.4.1.2	INTEGER	read-only	Number of compression histories (incoming).
INT pppLinkCcpHistorySizeOutgoing	1.3.6.1.4.1.343.6.23.1.4.1.3	INTEGER	read-only	Number of compression histories (outgoing).
INT pppLinkCcpCheckTypeIncoming	1.3.6.1.4.1.343.6.23.1.4.1.4	INTEGER	read-only	How compression history synchronization is handled (incoming).
INT pppLinkCcpCheckTypeOutgoing	1.3.6.1.4.1.343.6.23.1.4.1.5	INTEGER	read-only	How compression history synchronization is handled.
pppLinkEcpTable	1.3.6.1.4.1.343.6.23.1.5		not-accessible	ECP (Encryption Control Protocol) information table. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave).
pppLinkEcpEntry	1.3.6.1.4.1.343.6.23.1.5.1		not-accessible
INT pppLinkEcpIfIndex	1.3.6.1.4.1.343.6.23.1.5.1.1	INTEGER	read-only	Interface index
CTR pppLinkEcpResetRequestsRx	1.3.6.1.4.1.343.6.23.1.5.1.2	Counter	read-only	Number of encryption history reset requests received.
CTR pppLinkEcpResetRequestsTx	1.3.6.1.4.1.343.6.23.1.5.1.3	Counter	read-only	Number of encryption history reset requests sent.
CTR pppLinkEcpResetAcksRx	1.3.6.1.4.1.343.6.23.1.5.1.4	Counter	read-only	Number of encryption history reset acknowledgments received.
CTR pppLinkEcpResetAcksTx	1.3.6.1.4.1.343.6.23.1.5.1.5	Counter	read-only	Number of encryption history reset acknowledgments sent.
CTR pppLinkEcpRxDiscarded	1.3.6.1.4.1.343.6.23.1.5.1.6	Counter	read-only	Number of packets discarded due to lack of synchronization, buffer lacks or packet errors.
CTR pppLinkEcpTxDiscarded	1.3.6.1.4.1.343.6.23.1.5.1.7	Counter	read-only	Number of packets discarded due to buffer lacks or transmit queue overflows
INT pppLinkEcpReceiverState	1.3.6.1.4.1.343.6.23.1.5.1.8	INTEGER	read-only	State of receiver. Error state means waiting for reset acknowledgment
pppLinkCompTable	1.3.6.1.4.1.343.6.23.1.6		not-accessible	Compression information table. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave).
pppLinkCompEntry	1.3.6.1.4.1.343.6.23.1.6.1		not-accessible
INT pppLinkCompIfIndex	1.3.6.1.4.1.343.6.23.1.6.1.1	INTEGER	read-only	Interface index.
CTR pppLinkCompDecoderBytesIn	1.3.6.1.4.1.343.6.23.1.6.1.2	Counter	read-only	Total number of bytes received by the decoder (lower 32 bits).
CTR pppLinkCompDecoderDecompBytesOut	1.3.6.1.4.1.343.6.23.1.6.1.3	Counter	read-only	Decompressed bytes from the decoder (lower 32 bits).
CTR pppLinkCompDecoderUncompBytesOut	1.3.6.1.4.1.343.6.23.1.6.1.4	Counter	read-only	Uncompressed bytes received by the decoder (lower 32 bits).
CTR pppLinkCompDecoderCompPacketsIn	1.3.6.1.4.1.343.6.23.1.6.1.5	Counter	read-only	Compressed packets received by the decoder.
CTR pppLinkCompDecoderUncompPacketsIn	1.3.6.1.4.1.343.6.23.1.6.1.6	Counter	read-only	Uncompressed packets received by the decoder.
CTR pppLinkCompDecoderDecompQueueLength	1.3.6.1.4.1.343.6.23.1.6.1.7	Counter	read-only	Number of packets waiting to be decompressed.
CTR pppLinkCompDecoderCompressionRatio	1.3.6.1.4.1.343.6.23.1.6.1.8	Counter	read-only	Receive compression ratio (multiplied by 100).
CTR pppLinkCompDecoderResetRequestTx	1.3.6.1.4.1.343.6.23.1.6.1.9	Counter	read-only	The number of times the decoder requested re-initialization og the compression history.
CTR pppLinkCompDecoderResetAcksRx	1.3.6.1.4.1.343.6.23.1.6.1.10	Counter	read-only	The number of acknowledgments to reset requests received by the router.
CTR pppLinkCompDecoderRxDiscarded	1.3.6.1.4.1.343.6.23.1.6.1.11	Counter	read-only	Number of packets discarded by the decoder due to buffer lacks or synchronization problems.
INT pppLinkCompDecoderState	1.3.6.1.4.1.343.6.23.1.6.1.12	INTEGER	read-only	State of decoder. Error state means waiting for reset acknowledgment
CTR pppLinkCompEncoderBytesIn	1.3.6.1.4.1.343.6.23.1.6.1.13	Counter	read-only	Total number of bytes received by the encoder (lower 32 bits).
CTR pppLinkCompEncoderCompBytesOut	1.3.6.1.4.1.343.6.23.1.6.1.14	Counter	read-only	Number of compressed bytes leaving the encoder (lower 32 bits).
CTR pppLinkCompEncoderUncompBytesOut	1.3.6.1.4.1.343.6.23.1.6.1.15	Counter	read-only	Number of uncompressed bytes leaving the encoder (lower 32 bits).
CTR pppLinkCompEncoderCompPacketsOut	1.3.6.1.4.1.343.6.23.1.6.1.16	Counter	read-only	Number of compressed packets leaving the encoder.
CTR pppLinkCompEncoderUncompPacketsOut	1.3.6.1.4.1.343.6.23.1.6.1.17	Counter	read-only	Number of uncompressed packets leaving the encoder.
CTR pppLinkCompEncoderCompQueueLength	1.3.6.1.4.1.343.6.23.1.6.1.18	Counter	read-only	Number of packets waiting to be compressed.
CTR pppLinkCompEncoderCompressionRation	1.3.6.1.4.1.343.6.23.1.6.1.19	Counter	read-only	Transmit compression ratio (multiplied by 100).
CTR pppLinkCompEncoderResetRequestRx	1.3.6.1.4.1.343.6.23.1.6.1.20	Counter	read-only	The number of times the remote end requested re-initialization og the compression history.
CTR pppLinkCompEncoderResetAckTx	1.3.6.1.4.1.343.6.23.1.6.1.21	Counter	read-only	The number of acknowledgments to reset requests transmitted by the router.
CTR pppLinkCompEncoderTxDiscarded	1.3.6.1.4.1.343.6.23.1.6.1.22	Counter	read-only	Number of packets discarded by the encoder due to buffer lacks or transmit queue overflows.
CTR pppLinkCompDecoderBytesInUpper	1.3.6.1.4.1.343.6.23.1.6.1.23	Counter	read-only	Total number of bytes received by the decoder (upper 32 bits).
CTR pppLinkCompDecoderDecompBytesOutUpper	1.3.6.1.4.1.343.6.23.1.6.1.24	Counter	read-only	Decompressed bytes from the decoder (upper 32 bits).
CTR pppLinkCompDecoderUncompBytesOutUpper	1.3.6.1.4.1.343.6.23.1.6.1.25	Counter	read-only	Uncompressed bytes received by the decoder (upper 32 bits).
CTR pppLinkCompEncoderBytesInUpper	1.3.6.1.4.1.343.6.23.1.6.1.26	Counter	read-only	Total number of bytes received by the encoder (upper 32 bits).
CTR pppLinkCompEncoderCompBytesOutUpper	1.3.6.1.4.1.343.6.23.1.6.1.27	Counter	read-only	Number of compressed bytes leaving the encoder (upper 32 bits).
CTR pppLinkCompEncoderUncompBytesOutUpper	1.3.6.1.4.1.343.6.23.1.6.1.28	Counter	read-only	Number of uncompressed bytes leaving the encoder (upper 32 bits).
pppLinkChapTable	1.3.6.1.4.1.343.6.23.1.7		not-accessible	Table containing CHAP information. Not used for multilink master links (pppLinkProtoStatePppLinkType = multilinkmaster).
pppLinkChapEntry	1.3.6.1.4.1.343.6.23.1.7.1		not-accessible
INT pppLinkChapIfIndex	1.3.6.1.4.1.343.6.23.1.7.1.1	INTEGER	read-only	Interface index.
INT pppLinkChapIncoming	1.3.6.1.4.1.343.6.23.1.7.1.2	INTEGER	read-only	Is this router authenticated by the remote end using CHAP.
INT pppLinkChapOutgoing	1.3.6.1.4.1.343.6.23.1.7.1.3	INTEGER	read-only	Is the remote router authenticated using CHAP.
CTR pppLinkChapChallengeRx	1.3.6.1.4.1.343.6.23.1.7.1.4	Counter	read-only	Authentication challenges received from remote end
CTR pppLinkChapChallengeTx	1.3.6.1.4.1.343.6.23.1.7.1.5	Counter	read-only	Authentication challenges transmitted to remote end
CTR pppLinkChapResponseRx	1.3.6.1.4.1.343.6.23.1.7.1.6	Counter	read-only	Authentication responses received from remote end.
CTR pppLinkChapResponseTx	1.3.6.1.4.1.343.6.23.1.7.1.7	Counter	read-only	Authentication responses transmitted to remote end.
CTR pppLinkChapSuccesRx	1.3.6.1.4.1.343.6.23.1.7.1.8	Counter	read-only	Number of authentication succes replies received from remote end.
CTR pppLinkChapSuccesTx	1.3.6.1.4.1.343.6.23.1.7.1.9	Counter	read-only	Number of authentication succes replies transmitted to remote end.
CTR pppLinkChapFailureRx	1.3.6.1.4.1.343.6.23.1.7.1.10	Counter	read-only	Number of authentication failure replies received from remote end.
CTR pppLinkChapFailureTx	1.3.6.1.4.1.343.6.23.1.7.1.11	Counter	read-only	Number of authentication failure replies transmitted to remote end.
pppLinkPapTable	1.3.6.1.4.1.343.6.23.1.8		not-accessible	Table containing CHAP information. Not used for multilink master links (pppLinkProtoStatePppLinkType = multilinkmaster).
pppLinkPapEntry	1.3.6.1.4.1.343.6.23.1.8.1		not-accessible
INT pppLinkPapIfIndex	1.3.6.1.4.1.343.6.23.1.8.1.1	INTEGER	read-only	Interface index.
INT pppLinkPapIncoming	1.3.6.1.4.1.343.6.23.1.8.1.2	INTEGER	read-only	Is this router authenticated by the remote end using PAP.
INT pppLinkPapOutgoing	1.3.6.1.4.1.343.6.23.1.8.1.3	INTEGER	read-only	Is the remote router authenticated using PAP.
CTR pppLinkPapAuthReqRx	1.3.6.1.4.1.343.6.23.1.8.1.4	Counter	read-only	Number of authentication requests received from remote end.
CTR pppLinkPapAuthReqTx	1.3.6.1.4.1.343.6.23.1.8.1.5	Counter	read-only	Number of authentication requests transmitted to remote end.
CTR pppLinkPapAuthAckRx	1.3.6.1.4.1.343.6.23.1.8.1.6	Counter	read-only	Number of authentication succes replies received from remote end.
CTR pppLinkPapAuthAckTx	1.3.6.1.4.1.343.6.23.1.8.1.7	Counter	read-only	Number of authentication succes replies transmitted to remote end.
CTR pppLinkPapAuthNackRx	1.3.6.1.4.1.343.6.23.1.8.1.8	Counter	read-only	Number of authentication succes replies transmitted to remote end.
CTR pppLinkPapAuthNackTx	1.3.6.1.4.1.343.6.23.1.8.1.9	Counter	read-only	Number of authentication failure replies received from remote end.
pppLinkMlMasterTable	1.3.6.1.4.1.343.6.23.1.9		not-accessible	Table containing multilink master information. Only used when pppLinkProtoStatePppLinkType = multilinkmaster.
pppLinkMlMasterEntry	1.3.6.1.4.1.343.6.23.1.9.1		not-accessible
INT pppLinkMlMasterIfIndex	1.3.6.1.4.1.343.6.23.1.9.1.1	INTEGER	read-only	Interface index.
CTR pppLinkMlMasterSlaveCount	1.3.6.1.4.1.343.6.23.1.9.1.2	Counter	read-only	Number of slave links in multilink bundle.
CTR pppLinkMlMasterTxUtilization	1.3.6.1.4.1.343.6.23.1.9.1.3	Counter	read-only	Transmit utilization of current bundle measured in percent.
CTR pppLinkMlMasterRxUtilization	1.3.6.1.4.1.343.6.23.1.9.1.4	Counter	read-only	Receive utilization of current bundle measured in percent.
CTR pppLinkMlMasterSlavesForwarding	1.3.6.1.4.1.343.6.23.1.9.1.5	Counter	read-only	Number of forwarding slave links in bundle.
CTR pppLinkMlMasterLinkAddThreshold	1.3.6.1.4.1.343.6.23.1.9.1.6	Counter	read-only	Link Add Threshold (in percent)
CTR pppLinkMlMasterSamplingTime	1.3.6.1.4.1.343.6.23.1.9.1.7	Counter	read-only	Sampling time for utilization calculation.
INT pppLinkMlMasterSlavesWithBOD	1.3.6.1.4.1.343.6.23.1.9.1.8	INTEGER	read-only	Slaves with BOD in bundle
INT pppLinkMlMasterMeasuringMode	1.3.6.1.4.1.343.6.23.1.9.1.9	INTEGER	read-only	Utilization measurings mode
pppLinkMlSlaveTable	1.3.6.1.4.1.343.6.23.1.10		not-accessible	Table containing multilink slave information. Only used when pppLinkProtoStatePppLinkType = multilinkslave.
pppLinkMlSlaveEntry	1.3.6.1.4.1.343.6.23.1.10.1		not-accessible
INT pppLinkMlSlaveIfIndex	1.3.6.1.4.1.343.6.23.1.10.1.1	INTEGER	read-only	Interface index.
INT pppLinkMlSlaveBodEnabled	1.3.6.1.4.1.343.6.23.1.10.1.2	INTEGER	read-only	Bandwidth on demand enabled for this slave link.
INT pppLinkMlSlaveMasterIfIndex	1.3.6.1.4.1.343.6.23.1.10.1.3	INTEGER	read-only	Interface index of the corresponding master link.
pppLinkBacpTable	1.3.6.1.4.1.343.6.23.1.11		not-accessible	Table containing BACP/BAP information. Only used when pppLinkProtoStatePppLinkType = multilinkmaster and BACP has been opened.
pppLinkBacpEntry	1.3.6.1.4.1.343.6.23.1.11.1		not-accessible
INT pppLinkBacpIfIndex	1.3.6.1.4.1.343.6.23.1.11.1.1	INTEGER	read-only	Interface index.
INT pppLinkBacpMagicInc	1.3.6.1.4.1.343.6.23.1.11.1.2	INTEGER	read-only	Local BACP magic number
INT pppLinkBacpMagicOut	1.3.6.1.4.1.343.6.23.1.11.1.3	INTEGER	read-only	Remote BACP magic number
CTR pppLinkBacpCallReqTx	1.3.6.1.4.1.343.6.23.1.11.1.4	Counter	read-only	Number of BAP call requests transmitted.
CTR pppLinkBacpCallReqRx	1.3.6.1.4.1.343.6.23.1.11.1.5	Counter	read-only	Number of BAP call requests received.
CTR pppLinkBacpCallRespTx	1.3.6.1.4.1.343.6.23.1.11.1.6	Counter	read-only	Number of BAP call responses transmitted.
CTR pppLinkBacpCallRespRx	1.3.6.1.4.1.343.6.23.1.11.1.7	Counter	read-only	Number of BAP call responses received.
CTR pppLinkBacpCallbackReqTx	1.3.6.1.4.1.343.6.23.1.11.1.8	Counter	read-only	Number of BAP call-back requests transmitted.
CTR pppLinkBacpCallbackReqRx	1.3.6.1.4.1.343.6.23.1.11.1.9	Counter	read-only	Number of BAP call-back requests received.
CTR pppLinkBacpCallbackRespTx	1.3.6.1.4.1.343.6.23.1.11.1.10	Counter	read-only	Number of BAP call-back responses transmitted.
CTR pppLinkBacpCallbackRespRx	1.3.6.1.4.1.343.6.23.1.11.1.11	Counter	read-only	Number of BAP call-back responses received.
CTR pppLinkBacpLinkDropReqTx	1.3.6.1.4.1.343.6.23.1.11.1.12	Counter	read-only	Number of BAP link drop requests transmitted.
CTR pppLinkBacpLinkDropReqRx	1.3.6.1.4.1.343.6.23.1.11.1.13	Counter	read-only	Number of BAP link drop requests received.
CTR pppLinkBacpLinkDropRespTx	1.3.6.1.4.1.343.6.23.1.11.1.14	Counter	read-only	Number of BAP link drop responses transmitted.
CTR pppLinkBacpLinkDropRespRx	1.3.6.1.4.1.343.6.23.1.11.1.15	Counter	read-only	Number of BAP link drop responses received.
CTR pppLinkBacpCallStatusIndTx	1.3.6.1.4.1.343.6.23.1.11.1.16	Counter	read-only	Number of BAP call status indications transmitted.
CTR pppLinkBacpCallStatusIndRx	1.3.6.1.4.1.343.6.23.1.11.1.17	Counter	read-only	Number of BAP call status indications received.
CTR pppLinkBacpCallStatusRespTx	1.3.6.1.4.1.343.6.23.1.11.1.18	Counter	read-only	Number of BAP call status responses transmitted.
CTR pppLinkBacpCallStatusRespRx	1.3.6.1.4.1.343.6.23.1.11.1.19	Counter	read-only	Number of BAP call status responses received.
CTR pppLinkBacpNoFreeSlavesFound	1.3.6.1.4.1.343.6.23.1.11.1.20	Counter	read-only	No free slave links found to handle BAP request.
CTR pppLinkBacpMaxBundleSizeRejects	1.3.6.1.4.1.343.6.23.1.11.1.21	Counter	read-only	Not possible to handle BAP request for more bandwidth due to max bundle size has been reached.
CTR pppLinkBacpChannelLackDisconnects	1.3.6.1.4.1.343.6.23.1.11.1.22	Counter	read-only	Disconnects due to lack of channels.
INT pppLinkBacpOldProtocolIdsUsed	1.3.6.1.4.1.343.6.23.1.11.1.23	INTEGER	read-only	Using old BACP id's to support remote device.
pppLinkIpcpTable	1.3.6.1.4.1.343.6.23.1.12		not-accessible	IPCP (IP Control Protocol) information table. Values are first valid when protocol has state OPENED. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave).
pppLinkIpcpEntry	1.3.6.1.4.1.343.6.23.1.12.1		not-accessible
INT pppLinkIpcpIfIndex	1.3.6.1.4.1.343.6.23.1.12.1.1	INTEGER	read-only	Interface index
IP pppLinkIpcpIpAddressLocal	1.3.6.1.4.1.343.6.23.1.12.1.2	IpAddress	read-only	Local IP address.
IP pppLinkIpcpIpAddressRemote	1.3.6.1.4.1.343.6.23.1.12.1.3	IpAddress	read-only	Remote IP Address

RFC description

Vendor-specific MIB for Intel networking devices; defines Point-to-Point Protocol (PPP) interface objects and statistics.

Start monitoring Intel WAN/dial-up router (PPP-capable) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download INTEL-PPP-MIB

What Is INTEL-PPP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description