INTEL-PPP-MIB DEFINITIONS ::= BEGIN -- Copyright (C) 1997 Intel Corporation. All rights reserved. -- -- Intel Private PPP MIB, 26-03-1997 -- -- This MIB provides objects for PPP. -- -- Change History: -- -- IMPORTS IpAddress, Counter FROM RFC1155-SMI mib2ext FROM INTEL-GEN-MIB OBJECT-TYPE FROM RFC-1212; ppp OBJECT IDENTIFIER ::= { mib2ext 23 } pppLink OBJECT IDENTIFIER ::= { ppp 1} PppProtocolState ::= INTEGER { initial(1), starting(2), closed(3), stopped(4), closing(5), stopping(6), reqsent(7), ackrcvd(8), acksent(9), opened(10), disabled(11) } pppLinkProtoStateTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkProtoStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing protocol states and link type (standard, multilink slave or multilink master)." ::= { pppLink 1 } pppLinkProtoStateEntry OBJECT-TYPE SYNTAX PppLinkProtoStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkProtoStateIfIndex } ::= { pppLinkProtoStateTable 1 } PppLinkProtoStateEntry ::= SEQUENCE { pppLinkProtoStateIfIndex INTEGER, pppLinkProtoStatePppLinkType INTEGER, pppLinkProtoStateLcpState INTEGER, pppLinkProtoStateIpcpState INTEGER, pppLinkProtoStateIpxcpState INTEGER, pppLinkProtoStateBcpState INTEGER, pppLinkProtoStateCcpState INTEGER, pppLinkProtoStateEcpState INTEGER, pppLinkProtoStateBacpState INTEGER } pppLinkProtoStateIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index." ::= { pppLinkProtoStateEntry 1 } pppLinkProtoStatePppLinkType OBJECT-TYPE SYNTAX INTEGER { standard(1), multilinkmaster(2), multilinkslave(3) } ACCESS read-only STATUS mandatory DESCRIPTION "PPP Link type." ::= { pppLinkProtoStateEntry 2 } pppLinkProtoStateLcpState OBJECT-TYPE SYNTAX PppProtocolState ACCESS read-only STATUS mandatory DESCRIPTION "LCP (Link Control Protocol) state." ::= { pppLinkProtoStateEntry 3 } pppLinkProtoStateIpcpState OBJECT-TYPE SYNTAX PppProtocolState ACCESS read-only STATUS mandatory DESCRIPTION "IPCP (Ip Control Protocol) state. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave)." ::= { pppLinkProtoStateEntry 4 } pppLinkProtoStateIpxcpState OBJECT-TYPE SYNTAX PppProtocolState ACCESS read-only STATUS mandatory DESCRIPTION "IPXCP (Ipx Control Protocol) state. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave)." ::= { pppLinkProtoStateEntry 5 } pppLinkProtoStateBcpState OBJECT-TYPE SYNTAX PppProtocolState ACCESS read-only STATUS mandatory DESCRIPTION "BCP (Bridging Control Protocol) state. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave)." ::= { pppLinkProtoStateEntry 6 } pppLinkProtoStateCcpState OBJECT-TYPE SYNTAX PppProtocolState ACCESS read-only STATUS mandatory DESCRIPTION "CCP (Compression Control Protocol) state. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave)." ::= { pppLinkProtoStateEntry 7 } pppLinkProtoStateEcpState OBJECT-TYPE SYNTAX PppProtocolState ACCESS read-only STATUS mandatory DESCRIPTION "ECP (Encryption Control Protocol) state. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave)." ::= { pppLinkProtoStateEntry 8 } pppLinkProtoStateBacpState OBJECT-TYPE SYNTAX PppProtocolState ACCESS read-only STATUS mandatory DESCRIPTION "BACP (Bandwidth Allocation Control Protocol) state. Only used for multilink master links (pppLinkProtoStatePppLinkType = multilinkmaster)." ::= { pppLinkProtoStateEntry 9 } pppLinkLcpTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkLcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "LCP (Link Control Protocol) information table. Values are first valid when protocol has state OPENED. Not used for multilink master links (pppLinkProtoStatePppLinkType = multilinkmaster)." ::= { pppLink 2 } pppLinkLcpEntry OBJECT-TYPE SYNTAX PppLinkLcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkLcpIfIndex } ::= { pppLinkLcpTable 1 } PppLinkLcpEntry ::= SEQUENCE { pppLinkLcpIfIndex INTEGER, pppLinkLcpMRUInc INTEGER, pppLinkLcpMRUOut INTEGER, pppLinkLcpACCMapInc INTEGER, pppLinkLcpACCMapOut INTEGER, pppLinkProtocolCompressionInc INTEGER, pppLinkProtocolCompressionOut INTEGER, pppLinkACCompressionInc INTEGER, pppLinkACCompressionOut INTEGER, pppLinkMagicNumberInc INTEGER, pppLinkMagicNumberOut INTEGER, pppLinkLinkDiscriminatorInc INTEGER, pppLinkLinkDiscriminatorOut INTEGER } pppLinkLcpIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index" ::= { pppLinkLcpEntry 1 } pppLinkLcpMRUInc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local Maximum Receive Unit" ::= { pppLinkLcpEntry 2 } pppLinkLcpMRUOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Remote Maximum Receive Unit" ::= { pppLinkLcpEntry 3 } pppLinkLcpACCMapInc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local to peer ACCM map" ::= { pppLinkLcpEntry 4 } pppLinkLcpACCMapOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Peer to local ACCM map" ::= { pppLinkLcpEntry 5 } pppLinkProtocolCompressionInc OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Local to remote protocol field compression" ::= { pppLinkLcpEntry 6 } pppLinkProtocolCompressionOut OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Remote to local protocol field compression" ::= { pppLinkLcpEntry 7 } pppLinkACCompressionInc OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Local to remote address and control field compression" ::= { pppLinkLcpEntry 8 } pppLinkACCompressionOut OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Remote to local address and control field compression" ::= { pppLinkLcpEntry 9 } pppLinkMagicNumberInc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local magic number" ::= { pppLinkLcpEntry 10 } pppLinkMagicNumberOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Remote magic number" ::= { pppLinkLcpEntry 11 } pppLinkLinkDiscriminatorInc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local link discriminator" ::= { pppLinkLcpEntry 12 } pppLinkLinkDiscriminatorOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Remote link discriminator" ::= { pppLinkLcpEntry 13 } pppLinkBcpTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkBcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "BCP (Bridging Control Protocol) information table. Values are first valid when protocol has state OPENED. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave)." ::= { pppLink 3 } pppLinkBcpEntry OBJECT-TYPE SYNTAX PppLinkBcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkBcpIfIndex } ::= { pppLinkBcpTable 1 } PppLinkBcpEntry ::= SEQUENCE { pppLinkBcpIfIndex INTEGER, pppLinkBcpMACTypeInc INTEGER, pppLinkBcpMACTypeOut INTEGER, pppLinkBcpBridgingProtInc INTEGER, pppLinkBcpBridgingProtOut INTEGER } pppLinkBcpIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index" ::= { pppLinkBcpEntry 1 } pppLinkBcpMACTypeInc OBJECT-TYPE SYNTAX INTEGER { notnegotiated(1), ethernet(2)} ACCESS read-only STATUS mandatory DESCRIPTION "Frame type (incoming)" ::= { pppLinkBcpEntry 2 } pppLinkBcpMACTypeOut OBJECT-TYPE SYNTAX INTEGER { notnegotiated(1), ethernet(2)} ACCESS read-only STATUS mandatory DESCRIPTION "Frame type (outgoing)" ::= { pppLinkBcpEntry 3 } pppLinkBcpBridgingProtInc OBJECT-TYPE SYNTAX INTEGER { notnegotiated(1), spanningtree(2)} ACCESS read-only STATUS mandatory DESCRIPTION "Bridging protocol used (incoming)." ::= { pppLinkBcpEntry 4 } pppLinkBcpBridgingProtOut OBJECT-TYPE SYNTAX INTEGER { notnegotiated(1), spanningtree(2)} ACCESS read-only STATUS mandatory DESCRIPTION "Bridging protocol used (outgoing)." ::= { pppLinkBcpEntry 5 } pppLinkCcpTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkCcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "CCP (Compression Control Protocol) information table. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave)." ::= { pppLink 4 } pppLinkCcpEntry OBJECT-TYPE SYNTAX PppLinkCcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkCcpIfIndex } ::= { pppLinkCcpTable 1 } PppLinkCcpEntry ::= SEQUENCE { pppLinkCcpIfIndex INTEGER, pppLinkCcpHistorySizeIncoming INTEGER, pppLinkCcpHistorySizeOutgoing INTEGER, pppLinkCcpCheckTypeIncoming INTEGER, pppLinkCcpCheckTypeOutgoing INTEGER } pppLinkCcpIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index." ::= { pppLinkCcpEntry 1 } pppLinkCcpHistorySizeIncoming OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of compression histories (incoming)." ::= { pppLinkCcpEntry 2 } pppLinkCcpHistorySizeOutgoing OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of compression histories (outgoing)." ::= { pppLinkCcpEntry 3 } pppLinkCcpCheckTypeIncoming OBJECT-TYPE SYNTAX INTEGER { none(1), sequenceno(2), extms(3) } ACCESS read-only STATUS mandatory DESCRIPTION "How compression history synchronization is handled (incoming)." ::= { pppLinkCcpEntry 4 } pppLinkCcpCheckTypeOutgoing OBJECT-TYPE SYNTAX INTEGER { none(1), sequenceno(2), extms(3) } ACCESS read-only STATUS mandatory DESCRIPTION "How compression history synchronization is handled." ::= { pppLinkCcpEntry 5 } pppLinkEcpTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkEcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "ECP (Encryption Control Protocol) information table. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave)." ::= { pppLink 5 } pppLinkEcpEntry OBJECT-TYPE SYNTAX PppLinkEcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkEcpIfIndex } ::= { pppLinkEcpTable 1 } PppLinkEcpEntry ::= SEQUENCE { pppLinkEcpIfIndex INTEGER, pppLinkEcpResetRequestsRx Counter, pppLinkEcpResetRequestsTx Counter, pppLinkEcpResetAcksRx Counter, pppLinkEcpResetAcksTx Counter, pppLinkEcpRxDiscarded Counter, pppLinkEcpTxDiscarded Counter, pppLinkEcpReceiverState INTEGER } pppLinkEcpIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index" ::= { pppLinkEcpEntry 1 } pppLinkEcpResetRequestsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of encryption history reset requests received." ::= { pppLinkEcpEntry 2 } pppLinkEcpResetRequestsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of encryption history reset requests sent." ::= { pppLinkEcpEntry 3 } pppLinkEcpResetAcksRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of encryption history reset acknowledgments received." ::= { pppLinkEcpEntry 4 } pppLinkEcpResetAcksTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of encryption history reset acknowledgments sent." ::= { pppLinkEcpEntry 5 } pppLinkEcpRxDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets discarded due to lack of synchronization, buffer lacks or packet errors." ::= { pppLinkEcpEntry 6 } pppLinkEcpTxDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets discarded due to buffer lacks or transmit queue overflows" ::= { pppLinkEcpEntry 7 } pppLinkEcpReceiverState OBJECT-TYPE SYNTAX INTEGER { ok(1), error(2) } ACCESS read-only STATUS mandatory DESCRIPTION "State of receiver. Error state means waiting for reset acknowledgment" ::= { pppLinkEcpEntry 8 } pppLinkCompTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkCompEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Compression information table. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave)." ::= { pppLink 6 } pppLinkCompEntry OBJECT-TYPE SYNTAX PppLinkCompEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkCompIfIndex } ::= { pppLinkCompTable 1 } PppLinkCompEntry ::= SEQUENCE { pppLinkCompIfIndex INTEGER, pppLinkCompDecoderBytesIn Counter, pppLinkCompDecoderDecompBytesOut Counter, pppLinkCompDecoderUncompBytesOut Counter, pppLinkCompDecoderCompPacketsIn Counter, pppLinkCompDecoderUncompPacketsIn Counter, pppLinkCompDecoderDecompQueueLength Counter, pppLinkCompDecoderCompressionRatio Counter, pppLinkCompDecoderResetRequestTx Counter, pppLinkCompDecoderResetAcksRx Counter, pppLinkCompDecoderRxDiscarded Counter, pppLinkCompDecoderState INTEGER, pppLinkCompEncoderBytesIn Counter, pppLinkCompEncoderCompBytesOut Counter, pppLinkCompEncoderUncompBytesOut Counter, pppLinkCompEncoderCompPacketsOut Counter, pppLinkCompEncoderUncompPacketsOut Counter, pppLinkCompEncoderCompQueueLength Counter, pppLinkCompEncoderCompressionRation Counter, pppLinkCompEncoderResetRequestRx Counter, pppLinkCompEncoderResetAckTx Counter, pppLinkCompEncoderTxDiscarded Counter, pppLinkCompDecoderBytesInUpper Counter, pppLinkCompDecoderDecompBytesOutUpper Counter, pppLinkCompDecoderUncompBytesOutUpper Counter, pppLinkCompEncoderBytesInUpper Counter, pppLinkCompEncoderCompBytesOutUpper Counter, pppLinkCompEncoderUncompBytesOutUpper Counter } pppLinkCompIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index." ::= { pppLinkCompEntry 1 } pppLinkCompDecoderBytesIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bytes received by the decoder (lower 32 bits)." ::= { pppLinkCompEntry 2 } pppLinkCompDecoderDecompBytesOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Decompressed bytes from the decoder (lower 32 bits)." ::= { pppLinkCompEntry 3 } pppLinkCompDecoderUncompBytesOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Uncompressed bytes received by the decoder (lower 32 bits)." ::= { pppLinkCompEntry 4 } pppLinkCompDecoderCompPacketsIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Compressed packets received by the decoder." ::= { pppLinkCompEntry 5 } pppLinkCompDecoderUncompPacketsIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Uncompressed packets received by the decoder." ::= { pppLinkCompEntry 6 } pppLinkCompDecoderDecompQueueLength OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets waiting to be decompressed." ::= { pppLinkCompEntry 7 } pppLinkCompDecoderCompressionRatio OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Receive compression ratio (multiplied by 100)." ::= { pppLinkCompEntry 8 } pppLinkCompDecoderResetRequestTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the decoder requested re-initialization og the compression history." ::= { pppLinkCompEntry 9 } pppLinkCompDecoderResetAcksRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of acknowledgments to reset requests received by the router." ::= { pppLinkCompEntry 10 } pppLinkCompDecoderRxDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets discarded by the decoder due to buffer lacks or synchronization problems." ::= { pppLinkCompEntry 11 } pppLinkCompDecoderState OBJECT-TYPE SYNTAX INTEGER { ok(1), error(2) } ACCESS read-only STATUS mandatory DESCRIPTION "State of decoder. Error state means waiting for reset acknowledgment" ::= { pppLinkCompEntry 12 } pppLinkCompEncoderBytesIn OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bytes received by the encoder (lower 32 bits)." ::= { pppLinkCompEntry 13 } pppLinkCompEncoderCompBytesOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of compressed bytes leaving the encoder (lower 32 bits)." ::= { pppLinkCompEntry 14 } pppLinkCompEncoderUncompBytesOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of uncompressed bytes leaving the encoder (lower 32 bits)." ::= { pppLinkCompEntry 15 } pppLinkCompEncoderCompPacketsOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of compressed packets leaving the encoder." ::= { pppLinkCompEntry 16 } pppLinkCompEncoderUncompPacketsOut OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of uncompressed packets leaving the encoder." ::= { pppLinkCompEntry 17 } pppLinkCompEncoderCompQueueLength OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets waiting to be compressed." ::= { pppLinkCompEntry 18 } pppLinkCompEncoderCompressionRation OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Transmit compression ratio (multiplied by 100)." ::= { pppLinkCompEntry 19 } pppLinkCompEncoderResetRequestRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the remote end requested re-initialization og the compression history." ::= { pppLinkCompEntry 20 } pppLinkCompEncoderResetAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of acknowledgments to reset requests transmitted by the router." ::= { pppLinkCompEntry 21 } pppLinkCompEncoderTxDiscarded OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets discarded by the encoder due to buffer lacks or transmit queue overflows." ::= { pppLinkCompEntry 22 } pppLinkCompDecoderBytesInUpper OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bytes received by the decoder (upper 32 bits)." ::= { pppLinkCompEntry 23 } pppLinkCompDecoderDecompBytesOutUpper OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Decompressed bytes from the decoder (upper 32 bits)." ::= { pppLinkCompEntry 24 } pppLinkCompDecoderUncompBytesOutUpper OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Uncompressed bytes received by the decoder (upper 32 bits)." ::= { pppLinkCompEntry 25 } pppLinkCompEncoderBytesInUpper OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of bytes received by the encoder (upper 32 bits)." ::= { pppLinkCompEntry 26 } pppLinkCompEncoderCompBytesOutUpper OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of compressed bytes leaving the encoder (upper 32 bits)." ::= { pppLinkCompEntry 27 } pppLinkCompEncoderUncompBytesOutUpper OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of uncompressed bytes leaving the encoder (upper 32 bits)." ::= { pppLinkCompEntry 28 } pppLinkChapTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkChapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing CHAP information. Not used for multilink master links (pppLinkProtoStatePppLinkType = multilinkmaster)." ::= { pppLink 7 } pppLinkChapEntry OBJECT-TYPE SYNTAX PppLinkChapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkChapIfIndex } ::= { pppLinkChapTable 1 } PppLinkChapEntry ::= SEQUENCE { pppLinkChapIfIndex INTEGER, pppLinkChapIncoming INTEGER, pppLinkChapOutgoing INTEGER, pppLinkChapChallengeRx Counter, pppLinkChapChallengeTx Counter, pppLinkChapResponseRx Counter, pppLinkChapResponseTx Counter, pppLinkChapSuccesRx Counter, pppLinkChapSuccesTx Counter, pppLinkChapFailureRx Counter, pppLinkChapFailureTx Counter } pppLinkChapIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index." ::= { pppLinkChapEntry 1 } pppLinkChapIncoming OBJECT-TYPE SYNTAX INTEGER { notnegotiated(1), yes(2)} ACCESS read-only STATUS mandatory DESCRIPTION "Is this router authenticated by the remote end using CHAP." ::= { pppLinkChapEntry 2 } pppLinkChapOutgoing OBJECT-TYPE SYNTAX INTEGER { notnegotiated(1), yes(2)} ACCESS read-only STATUS mandatory DESCRIPTION "Is the remote router authenticated using CHAP." ::= { pppLinkChapEntry 3 } pppLinkChapChallengeRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Authentication challenges received from remote end" ::= { pppLinkChapEntry 4 } pppLinkChapChallengeTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Authentication challenges transmitted to remote end" ::= { pppLinkChapEntry 5 } pppLinkChapResponseRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Authentication responses received from remote end." ::= { pppLinkChapEntry 6 } pppLinkChapResponseTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Authentication responses transmitted to remote end." ::= { pppLinkChapEntry 7 } pppLinkChapSuccesRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of authentication succes replies received from remote end." ::= { pppLinkChapEntry 8 } pppLinkChapSuccesTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of authentication succes replies transmitted to remote end." ::= { pppLinkChapEntry 9 } pppLinkChapFailureRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of authentication failure replies received from remote end." ::= { pppLinkChapEntry 10 } pppLinkChapFailureTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of authentication failure replies transmitted to remote end." ::= { pppLinkChapEntry 11 } pppLinkPapTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkPapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing CHAP information. Not used for multilink master links (pppLinkProtoStatePppLinkType = multilinkmaster)." ::= { pppLink 8 } pppLinkPapEntry OBJECT-TYPE SYNTAX PppLinkPapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkPapIfIndex } ::= { pppLinkPapTable 1 } PppLinkPapEntry ::= SEQUENCE { pppLinkPapIfIndex INTEGER, pppLinkPapIncoming INTEGER, pppLinkPapOutgoing INTEGER, pppLinkPapAuthReqRx Counter, pppLinkPapAuthReqTx Counter, pppLinkPapAuthAckRx Counter, pppLinkPapAuthAckTx Counter, pppLinkPapAuthNackRx Counter, pppLinkPapAuthNackTx Counter } pppLinkPapIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index." ::= { pppLinkPapEntry 1 } pppLinkPapIncoming OBJECT-TYPE SYNTAX INTEGER { notnegotiated(1), yes(2)} ACCESS read-only STATUS mandatory DESCRIPTION "Is this router authenticated by the remote end using PAP." ::= { pppLinkPapEntry 2 } pppLinkPapOutgoing OBJECT-TYPE SYNTAX INTEGER { notnegotiated(1), yes(2)} ACCESS read-only STATUS mandatory DESCRIPTION "Is the remote router authenticated using PAP." ::= { pppLinkPapEntry 3 } pppLinkPapAuthReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of authentication requests received from remote end." ::= { pppLinkPapEntry 4 } pppLinkPapAuthReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of authentication requests transmitted to remote end." ::= { pppLinkPapEntry 5 } pppLinkPapAuthAckRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of authentication succes replies received from remote end." ::= { pppLinkPapEntry 6 } pppLinkPapAuthAckTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of authentication succes replies transmitted to remote end." ::= { pppLinkPapEntry 7 } pppLinkPapAuthNackRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of authentication succes replies transmitted to remote end." ::= { pppLinkPapEntry 8 } pppLinkPapAuthNackTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of authentication failure replies received from remote end." ::= { pppLinkPapEntry 9 } pppLinkMlMasterTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkMlMasterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing multilink master information. Only used when pppLinkProtoStatePppLinkType = multilinkmaster." ::= { pppLink 9 } pppLinkMlMasterEntry OBJECT-TYPE SYNTAX PppLinkMlMasterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkMlMasterIfIndex } ::= { pppLinkMlMasterTable 1 } PppLinkMlMasterEntry ::= SEQUENCE { pppLinkMlMasterIfIndex INTEGER, pppLinkMlMasterSlaveCount Counter, pppLinkMlMasterTxUtilization Counter, pppLinkMlMasterRxUtilization Counter, pppLinkMlMasterSlavesForwarding Counter, pppLinkMlMasterLinkAddThreshold Counter, pppLinkMlMasterSamplingTime Counter, pppLinkMlMasterSlavesWithBOD INTEGER, pppLinkMlMasterMeasuringMode INTEGER } pppLinkMlMasterIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index." ::= { pppLinkMlMasterEntry 1 } pppLinkMlMasterSlaveCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of slave links in multilink bundle." ::= { pppLinkMlMasterEntry 2 } pppLinkMlMasterTxUtilization OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Transmit utilization of current bundle measured in percent." ::= { pppLinkMlMasterEntry 3 } pppLinkMlMasterRxUtilization OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Receive utilization of current bundle measured in percent." ::= { pppLinkMlMasterEntry 4 } pppLinkMlMasterSlavesForwarding OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of forwarding slave links in bundle." ::= { pppLinkMlMasterEntry 5 } pppLinkMlMasterLinkAddThreshold OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Link Add Threshold (in percent)" ::= { pppLinkMlMasterEntry 6 } pppLinkMlMasterSamplingTime OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Sampling time for utilization calculation." ::= { pppLinkMlMasterEntry 7 } pppLinkMlMasterSlavesWithBOD OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2)} ACCESS read-only STATUS mandatory DESCRIPTION "Slaves with BOD in bundle" ::= { pppLinkMlMasterEntry 8 } pppLinkMlMasterMeasuringMode OBJECT-TYPE SYNTAX INTEGER { none(1), rx(2), tx(3), all(4)} ACCESS read-only STATUS mandatory DESCRIPTION "Utilization measurings mode" ::= { pppLinkMlMasterEntry 9 } pppLinkMlSlaveTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkMlSlaveEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing multilink slave information. Only used when pppLinkProtoStatePppLinkType = multilinkslave." ::= { pppLink 10 } pppLinkMlSlaveEntry OBJECT-TYPE SYNTAX PppLinkMlSlaveEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkMlSlaveIfIndex } ::= { pppLinkMlSlaveTable 1 } PppLinkMlSlaveEntry ::= SEQUENCE { pppLinkMlSlaveIfIndex INTEGER, pppLinkMlSlaveBodEnabled INTEGER, pppLinkMlSlaveMasterIfIndex INTEGER } pppLinkMlSlaveIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index." ::= { pppLinkMlSlaveEntry 1 } pppLinkMlSlaveBodEnabled OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Bandwidth on demand enabled for this slave link." ::= { pppLinkMlSlaveEntry 2 } pppLinkMlSlaveMasterIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index of the corresponding master link." ::= { pppLinkMlSlaveEntry 3 } pppLinkBacpTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkBacpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing BACP/BAP information. Only used when pppLinkProtoStatePppLinkType = multilinkmaster and BACP has been opened." ::= { pppLink 11 } pppLinkBacpEntry OBJECT-TYPE SYNTAX PppLinkBacpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkBacpIfIndex } ::= { pppLinkBacpTable 1 } PppLinkBacpEntry ::= SEQUENCE { pppLinkBacpIfIndex INTEGER, pppLinkBacpMagicInc INTEGER, pppLinkBacpMagicOut INTEGER, pppLinkBacpCallReqTx Counter, pppLinkBacpCallReqRx Counter, pppLinkBacpCallRespTx Counter, pppLinkBacpCallRespRx Counter, pppLinkBacpCallbackReqTx Counter, pppLinkBacpCallbackReqRx Counter, pppLinkBacpCallbackRespTx Counter, pppLinkBacpCallbackRespRx Counter, pppLinkBacpLinkDropReqTx Counter, pppLinkBacpLinkDropReqRx Counter, pppLinkBacpLinkDropRespTx Counter, pppLinkBacpLinkDropRespRx Counter, pppLinkBacpCallStatusIndTx Counter, pppLinkBacpCallStatusIndRx Counter, pppLinkBacpCallStatusRespTx Counter, pppLinkBacpCallStatusRespRx Counter, pppLinkBacpNoFreeSlavesFound Counter, pppLinkBacpMaxBundleSizeRejects Counter, pppLinkBacpChannelLackDisconnects Counter, pppLinkBacpOldProtocolIdsUsed INTEGER } pppLinkBacpIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index." ::= { pppLinkBacpEntry 1 } pppLinkBacpMagicInc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Local BACP magic number" ::= { pppLinkBacpEntry 2 } pppLinkBacpMagicOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Remote BACP magic number" ::= { pppLinkBacpEntry 3 } pppLinkBacpCallReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call requests transmitted." ::= { pppLinkBacpEntry 4 } pppLinkBacpCallReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call requests received." ::= { pppLinkBacpEntry 5 } pppLinkBacpCallRespTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call responses transmitted." ::= { pppLinkBacpEntry 6 } pppLinkBacpCallRespRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call responses received." ::= { pppLinkBacpEntry 7 } pppLinkBacpCallbackReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call-back requests transmitted." ::= { pppLinkBacpEntry 8 } pppLinkBacpCallbackReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call-back requests received." ::= { pppLinkBacpEntry 9 } pppLinkBacpCallbackRespTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call-back responses transmitted." ::= { pppLinkBacpEntry 10 } pppLinkBacpCallbackRespRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call-back responses received." ::= { pppLinkBacpEntry 11 } pppLinkBacpLinkDropReqTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP link drop requests transmitted." ::= { pppLinkBacpEntry 12 } pppLinkBacpLinkDropReqRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP link drop requests received." ::= { pppLinkBacpEntry 13 } pppLinkBacpLinkDropRespTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP link drop responses transmitted." ::= { pppLinkBacpEntry 14 } pppLinkBacpLinkDropRespRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP link drop responses received." ::= { pppLinkBacpEntry 15 } pppLinkBacpCallStatusIndTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call status indications transmitted." ::= { pppLinkBacpEntry 16 } pppLinkBacpCallStatusIndRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call status indications received." ::= { pppLinkBacpEntry 17 } pppLinkBacpCallStatusRespTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call status responses transmitted." ::= { pppLinkBacpEntry 18 } pppLinkBacpCallStatusRespRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of BAP call status responses received." ::= { pppLinkBacpEntry 19 } pppLinkBacpNoFreeSlavesFound OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No free slave links found to handle BAP request." ::= { pppLinkBacpEntry 20 } pppLinkBacpMaxBundleSizeRejects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Not possible to handle BAP request for more bandwidth due to max bundle size has been reached." ::= { pppLinkBacpEntry 21 } pppLinkBacpChannelLackDisconnects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Disconnects due to lack of channels." ::= { pppLinkBacpEntry 22 } pppLinkBacpOldProtocolIdsUsed OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Using old BACP id's to support remote device." ::= { pppLinkBacpEntry 23 } pppLinkIpcpTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLinkIpcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IPCP (IP Control Protocol) information table. Values are first valid when protocol has state OPENED. Not used for multilink slave links (pppLinkProtoStatePppLinkType = multilinkslave)." ::= { pppLink 12 } pppLinkIpcpEntry OBJECT-TYPE SYNTAX PppLinkIpcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { pppLinkIpcpIfIndex } ::= { pppLinkIpcpTable 1 } PppLinkIpcpEntry ::= SEQUENCE { pppLinkIpcpIfIndex INTEGER, pppLinkIpcpIpAddressLocal IpAddress, pppLinkIpcpIpAddressRemote IpAddress } pppLinkIpcpIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface index" ::= { pppLinkIpcpEntry 1 } pppLinkIpcpIpAddressLocal OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Local IP address." ::= { pppLinkIpcpEntry 2 } pppLinkIpcpIpAddressRemote OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Remote IP Address" ::= { pppLinkIpcpEntry 3 } END