All MIBs › INETMROUTE-STD-MIB › inetMRouteEnabled
inetMRouteEnabled
Module: INETMROUTE-STD-MIB
OID (symbolic): INETMROUTE-STD-MIB::inetMRouteEnabled
OID (numeric): 1.3.6.1.2.1.0.1.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: The enabled status of IP Multicast routing on this router.
What is inetMRouteEnabled?
Turns IP multicast routing on or off for this router; when disabled, the router won't build or use multicast forwarding state at all, regardless of what multicast routing protocol is configured.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.0.1.1.1 snmpwalk -v2c -c public <target> INETMROUTE-STD-MIB::inetMRouteEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.0.1.1.1.1 snmpget -v2c -c public <target> INETMROUTE-STD-MIB::inetMRouteEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.0.1.1.1.1 s <value>
Start monitoring Vendor-neutral IETF standard (IP multicast-capable router/Layer 3 switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INETMROUTE-STD-MIB::inetMRouteEnabled OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (IP multicast-capable router/Layer 3 switch) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.0 | dhcp | DHCP-V4-RELAY-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.0.1 | inetMRouteMIBObjects | INETMROUTE-STD-MIB |
| 1.3.6.1.2.1.0.1.1 | inetMRoute | INETMROUTE-STD-MIB |
| 1.3.6.1.2.1.0.1.1.1 | inetMRouteEnabled | INETMROUTE-STD-MIB |