VI-IP-MIB

All MIBs › VI-IP-MIB

Last Updated: 2000-11-15

Description: Defines managed objects for Virtual Interface (VI) over TCP implementation on Giganet cluster interconnect nodes, tracking connection requests and VI creation counters

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VI-IP-MIB?

VI-IP-MIB is a legacy proprietary MIB describing objects for VIA (Virtual Interface Architecture) over TCP/IP. Its objects cover node system name, VIA-created/connect-request/connect-wait/disconnect/connect-timeout/connected counters, current pending connect/connect-wait/connected/error counts, total error count, and inbound/outbound message, RDMA, byte, RDMA-read-byte, and RDMA-write-byte counters, alongside a connection table. As a performance MIB it lets an administrator watch VIA/RDMA connection establishment and data-transfer volume on this legacy VIA-over-TCP device. It is deployed on legacy Virtual Interface Architecture (VIA)-over-TCP equipment. Engineers can download the VI-IP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VI-IP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Virtual Interface Architecture (VIA)-over-TCP equipment

Monitoring Examples

An administrator checks VIACurrError and VIAInRDMAReadBytes to watch VIA connection errors and RDMA transfer volume on this legacy VIA-over-TCP device.

What Can Be Monitored

VIA/RDMA connection establishment and data-transfer volume

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress
NetworkAddress
ObjectName
enterprises

From RFC1213-MIB

DisplayString
mib-2

From SNMPv2-SMI

Counter32
Gauge32
Integer32
NOTIFICATION-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
viIPMib	1.3.6.1.2.1.0			The MIB module to describe objects for virtual interface over TCP implementation.
viIPMibObjects	1.3.6.1.2.1.0.1
viaNodeConnection	1.3.6.1.2.1.0.1.1
STR vIANodeSystemName	1.3.6.1.2.1.0.1.1.1	DisplayString	read-only	A string by which the node is identified in the cluster.
C32 vIACreated	1.3.6.1.2.1.0.1.1.2	Counter32	read-only	The number of VIs have been created.
C32 vIAConnectRequest	1.3.6.1.2.1.0.1.1.3	Counter32	read-only	The number of times Connect Request call is made.
C32 vIAConnectWait	1.3.6.1.2.1.0.1.1.4	Counter32	read-only	The number of times Connect wait call is made.
C32 vIADisconnect	1.3.6.1.2.1.0.1.1.5	Counter32	read-only	Number of times VI got disconnected with out any error.
C32 vIAConnectTimeOut	1.3.6.1.2.1.0.1.1.6	Counter32	read-only	Number of times VI connect request got timed out.
C32 vIAConnected	1.3.6.1.2.1.0.1.1.7	Counter32	read-only	Number of time VI got connected with out any error.
G32 vIACurrConnectPending	1.3.6.1.2.1.0.1.1.8	Gauge32	read-only	The number of VIs for which connect request is pending.
G32 vIACurrConnectWaitPending	1.3.6.1.2.1.0.1.1.9	Gauge32	read-only	The number of VIs for which connect wait request is pending.
G32 vIACurrConnected	1.3.6.1.2.1.0.1.1.10	Gauge32	read-only	The number of VIs for which the current state is CONNECTED.
G32 vIACurrError	1.3.6.1.2.1.0.1.1.11	Gauge32	read-only	The number of VIs for which the current state is ERROR
C32 vIATotalError	1.3.6.1.2.1.0.1.1.12	Counter32	read-only	The number of VIs which encountered error state.
C32 vIAInMsgs	1.3.6.1.2.1.0.1.1.13	Counter32	read-only	The total number of incoming Messages received.
C32 vIAInRdma	1.3.6.1.2.1.0.1.1.14	Counter32	read-only	The total number of incoming RDMA requests received.
C32 vIAInBytes	1.3.6.1.2.1.0.1.1.15	Counter32	read-only	The total number of incoming bytes received, including those received in error. This count includes bytes received on currently established connections. This corresponds to the sum of bytes received through received messages, incoming RDMA writes and RDMA reads issued
C32 vIAInRDMAReadBytes	1.3.6.1.2.1.0.1.1.16	Counter32	read-only	The total number of incoming bytes received through RDMA read, including those received in error. This count includes bytes received on currently established connections.
C32 vIAInRDMAWriteBytes	1.3.6.1.2.1.0.1.1.17	Counter32	read-only	The total number of bytes received through incoming RDMA writes, including those received in error. This count includes bytes received on currently established connections.
C32 vIAOutMsgs	1.3.6.1.2.1.0.1.1.18	Counter32	read-only	The total number of Messages sent.
C32 vIAOutRdma	1.3.6.1.2.1.0.1.1.19	Counter32	read-only	The total number of RDMA requests sent.
C32 vIAOutBytes	1.3.6.1.2.1.0.1.1.20	Counter32	read-only	The total number of bytes sent, including those sent in error. This count includes bytes sent on currently established connections.
C32 vIAOutRDMAReadBytes	1.3.6.1.2.1.0.1.1.21	Counter32	read-only	The total number of bytes sent through an incoming RDMA read request, including those sent in error. This count includes bytes sent on currently established connections.
C32 vIAOutRDMAWriteBytes	1.3.6.1.2.1.0.1.1.22	Counter32	read-only	The total number of bytes sent through a RDMA write operation, including those sent in error. This count includes bytes sent on currently established connections.
vIAConnTable	1.3.6.1.2.1.0.1.1.23		not-accessible	A table containing VIA connection specific information.
vIAConnEntry	1.3.6.1.2.1.0.1.1.23.1		not-accessible	A conceptual row of the vIAConnTable containing information about a particular current VIA connection. Each row of this table is transient, and it ceases to exist when the connection makes transition to the CLOSED state.
INT vIAConnState	1.3.6.1.2.1.0.1.1.23.1.1	INTEGER	read-only	The state of this VIA connection Legal States: Idle 1 Pending Connect 2 Connected 3 Error 4
INT vIAConnVINumber	1.3.6.1.2.1.0.1.1.23.1.2	INTEGER	read-only	A number which uniquely defines a connection.
IP vIAConnRemoteNetAddress	1.3.6.1.2.1.0.1.1.23.1.3	IpAddress	read-only	IP address of the remote system of the connection.
IP vIAConnLocalNetAddress	1.3.6.1.2.1.0.1.1.23.1.4	IpAddress	read-only	Local IPadress of the connection.
INT vIAConnRemotePortNumber	1.3.6.1.2.1.0.1.1.23.1.5	INTEGER	read-only	Remote TCP port number of the connection.
INT vIAConnLocalPortNumber	1.3.6.1.2.1.0.1.1.23.1.6	INTEGER	read-only	Local TCP Portnumber of the connection.
OCT vIAConnLocalDescriminator	1.3.6.1.2.1.0.1.1.23.1.7	OCTET STRING	read-only	An identifier used by the local process to identify the VI connection.
OCT vIAConnRemoteDescriminator	1.3.6.1.2.1.0.1.1.23.1.8	OCTET STRING	read-only	An identifier used by the remote process to identify the VI connection.
INT vIAConnLocalMaxTransferSize	1.3.6.1.2.1.0.1.1.23.1.9	INTEGER	read-only	The local limit on the maximum packet size that can be transfered through the connection.
INT vIAConnRemoteMaxTransferSize	1.3.6.1.2.1.0.1.1.23.1.10	INTEGER	read-only	The remote limit on the maximum packet size that can be transfered through the connection.
INT vIAConnLocalEnableRdmaWrite	1.3.6.1.2.1.0.1.1.23.1.11	INTEGER	read-only	The value is 1 if remote DMA write is enabled in the local system otherwise, it is 0.
INT vIAConnLocalEnableRdmaRead	1.3.6.1.2.1.0.1.1.23.1.12	INTEGER	read-only	The value is 1 if remote DMA read is enabled in the local system otherwise, it is 0.
INT vIAConnRemoteEnableRdmaWrite	1.3.6.1.2.1.0.1.1.23.1.13	INTEGER	read-only	The value is 1 if remote DMA write is enabled in the remote system otherwise, it is 0.
INT vIAConnRemoteEnableRdmaRead	1.3.6.1.2.1.0.1.1.23.1.14	INTEGER	read-only	The value is 1 if remote DMA read is enabled in the remote system otherwise, it is 0.
C32 vIAConnSentMessages	1.3.6.1.2.1.0.1.1.23.1.15	Counter32	read-only	Total number of messages sent through the connection.
C32 vIAConnSentRdmaReadMessages	1.3.6.1.2.1.0.1.1.23.1.16	Counter32	read-only	Total number of rdma read messages sent through the connection.
C32 vIAConnSentRdmaWriteMessages	1.3.6.1.2.1.0.1.1.23.1.17	Counter32	read-only	Total number of rdma write messages sent through the connection.
C32 vIAConnRcvdMessages	1.3.6.1.2.1.0.1.1.23.1.18	Counter32	read-only	Total number of messages received through the connection.
C32 vIAConnRcvdRdmaReadMessages	1.3.6.1.2.1.0.1.1.23.1.19	Counter32	read-only	Total number of rdma read messages received through the connection.
C32 vIAConnRcvdRdmaWriteMessages	1.3.6.1.2.1.0.1.1.23.1.20	Counter32	read-only	Total number of rdma write messages received through the connection.
viaErrors	1.3.6.1.2.1.0.1.2
C32 vIAErrPostDesc	1.3.6.1.2.1.0.1.2.1	Counter32	read-only	The total number of descriptors completed in error by NIC.
C32 vIAErrConnLost	1.3.6.1.2.1.0.1.2.2	Counter32	read-only	The total number of Lost Connection errors.
C32 vIAErrRecvQEmpty	1.3.6.1.2.1.0.1.2.3	Counter32	read-only	The total number of errors due to an empty receive Queue.
C32 vIAErrRdmawProt	1.3.6.1.2.1.0.1.2.4	Counter32	read-only	The total number of remote DMA write protection errors.
C32 vIAErrRdmarProt	1.3.6.1.2.1.0.1.2.5	Counter32	read-only	The total number of remote DMA read protection errors.
C32 vIAErrCompProt	1.3.6.1.2.1.0.1.2.6	Counter32	read-only	The total number of protection errors.
INT vIAErrorThreshold	1.3.6.1.2.1.0.1.2.7	INTEGER	read-write	Setting this threshold will cause a trap to be enabled such that if the total error exceeds error threshold set a VIANodeErrorsTrap trap will be generated. The trap will reset the error counter.
viaNicAttributes	1.3.6.1.2.1.0.1.3
vIANicTable	1.3.6.1.2.1.0.1.3.1		not-accessible	A table containing VIA NIC specific information.
vIANicEntry	1.3.6.1.2.1.0.1.3.1.1		not-accessible	A conceptual row of the vIANicTable containing information about a particular VINic.
INT vIANicIndex	1.3.6.1.2.1.0.1.3.1.1.1	INTEGER	read-only	The index of the NIC in the NIC table.
STR vIAName	1.3.6.1.2.1.0.1.3.1.1.2	DisplayString	read-only	The symbolic name of the NIC device.
STR vIAHardwareVersion	1.3.6.1.2.1.0.1.3.1.1.3	DisplayString	read-only	The version of the VINIC described by this MIB.
STR vIAProviderVersion	1.3.6.1.2.1.0.1.3.1.1.4	DisplayString	read-only	The version of the VI provider.
PHY vIANicAddress	1.3.6.1.2.1.0.1.3.1.1.5	PhysAddress	read-only	The Network address of the NIC.
INT vIAThreadSafe	1.3.6.1.2.1.0.1.3.1.1.6	INTEGER	read-only	1 if synchronisation model is thread safe else 0.
INT vIAMaxDiscriminatorLength	1.3.6.1.2.1.0.1.3.1.1.7	INTEGER	read-only	The maximum number of bytes that the VI provider allows for a connection descriminator.
INT vIAMaxRegisterBytes	1.3.6.1.2.1.0.1.3.1.1.8	INTEGER	read-only	Maximum number of bytes that can be registered by the VI user.
INT vIAMaxRegisterRegions	1.3.6.1.2.1.0.1.3.1.1.9	INTEGER	read-only	Maximum number of memory regions that can be registered by VI user.
INT vIAMaxRegisterBlockBytes	1.3.6.1.2.1.0.1.3.1.1.10	INTEGER	read-only	Largest contiguous block of memory that can be registered by VI user.
INT vIAMaxVI	1.3.6.1.2.1.0.1.3.1.1.11	INTEGER	read-only	The limit on the total number of VI instances this NIC can support.
INT vIAMaxDescriptorsPerQueue	1.3.6.1.2.1.0.1.3.1.1.12	INTEGER	read-only	Maximum Descriptors per VI Work Queue that this VI provider can support.
INT vIAMaxSegmentsPerDesc	1.3.6.1.2.1.0.1.3.1.1.13	INTEGER	read-only	Maximum number of segments per descriptor that this VI provider can support.
INT vIAMaxCQ	1.3.6.1.2.1.0.1.3.1.1.14	INTEGER	read-only	Maximum number of completion queues this VI provider can support.
INT vIAMaxCQEntries	1.3.6.1.2.1.0.1.3.1.1.15	INTEGER	read-only	Maximum number of Completion queue entries per completion queue that this VI provider can support.
INT vIAMaxTransferSize	1.3.6.1.2.1.0.1.3.1.1.16	INTEGER	read-only	The maximum transfer size supported by the VI Nic. The maximum transfer size is the amount of data that can be described by a single VI descriptor.
INT vIANativeMTU	1.3.6.1.2.1.0.1.3.1.1.17	INTEGER	read-only	The native MTU size of the underlying network. For frame-based networks, this could reflect its native frame size. For cell-based networks, it could reflect the MTU of the appropriate abstraction layer that it supports.
INT vIAMaxPTags	1.3.6.1.2.1.0.1.3.1.1.18	INTEGER	read-only	The maximum number of protection tags that are supported by this VI provider.
INT vIACurrRegisterBytes	1.3.6.1.2.1.0.1.3.1.1.19	INTEGER	read-only	Number of bytes registered by the VI user for this NIC.
INT vIACurrRegisterRegions	1.3.6.1.2.1.0.1.3.1.1.20	INTEGER	read-only	Number of memory regions that is registered by VI user for this NIC.
INT vIACurrVI	1.3.6.1.2.1.0.1.3.1.1.21	INTEGER	read-only	The current number of VI instances for this NIC.
INT vIACurrCQ	1.3.6.1.2.1.0.1.3.1.1.22	INTEGER	read-only	Current number of completion queues this VI provider has.
INT vIACurrPTags	1.3.6.1.2.1.0.1.3.1.1.23	INTEGER	read-only	Current Number of protection tags this VI provider has.
INT vIAConnectionListenPort	1.3.6.1.2.1.0.1.3.1.1.24	INTEGER	read-only	Port number on which VI server is listening for VI connection request.
viipTraps	1.3.6.1.2.1.0.2
NTF vIANodeUpTrap	1.3.6.1.2.1.0.2.2			A VIANodeUpTrap trap signifies a VIA Node is started and initialised successfully.

RFC description

Describes virtual interface implementation over TCP for cluster node connections and communication statistics.

Start monitoring Legacy Virtual Interface Architecture (VIA)-over-TCP equipment (connection-establishment/RDMA-transfer counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VI-IP-MIB

What Is VI-IP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description