IEEE8021-EVB-MIB

All MIBs › IEEE8021-EVB-MIB

Organization: IEEE 802.1 Working Group

Last Updated: 2018-06-21

Category: Standard: IEEE 802, Technology: Switching/L2

Description: IEEE 802.1 MIB for Edge Virtual Bridging (802.1Qbg) managing virtualization-aware bridging between hypervisors and switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IEEE8021-EVB-MIB?

IEEE8021-EVB-MIB is the standard IEEE 802.1 Working Group MIB (part of IEEE Std 802.1Q) managing Edge Virtual Bridging (EVB), which coordinates VLAN/VSI configuration between a hypervisor's virtual switch and the adjacent physical bridge via VDP (VSI Discovery and Configuration Protocol) and ECP (Edge Control Protocol). Its objects cover system type, external port count, EVB LLDP transmit-enable/manual/GID-capable flags, ECP acknowledgment timer/default-timer-expiry/max-retries, VDP default resource-wait-delay/reinit-keepalive (with expiry variants), a bridge-port (SBP) table (component ID, port number, LLDP manual mode, operational VDP resource-wait-delay/reinit-keepalive/timeout), and a VSI database table. As a configuration/protocol-status MIB it lets an administrator confirm ECP/VDP timer settings that govern how quickly a virtual machine's network configuration propagates to the physical switch. It is deployed on network devices implementing IEEE 802.1Qbg Edge Virtual Bridging. Engineers implementing or auditing this functionality typically reference the IEEE8021-EVB-MIB RFC/standard documentation for the authoritative specification.

IPNetwork Monitor allows you to monitor SNMP objects defined in IEEE8021-EVB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Network devices implementing IEEE 802.1Qbg Edge Virtual Bridging

Monitoring Examples

An administrator checks ieee8021BridgeEvbSysEcpAckTimer and ieee8021BridgeEvbSysVdpDfltRsrcWaitDelay to confirm EVB timers are tuned for the intended VM-migration speed on an EVB-capable switch.

What Can Be Monitored

EVB (VDP/ECP) timer configuration and VSI database

Imported Objects

From IEEE8021-BRIDGE-MIB

ieee8021BridgePhyPort

OBJECT-TYPE

From IEEE8021-TC-MIB

IEEE8021BridgePortNumber
IEEE8021PbbComponentIdentifier
ieee802dot1mibs	OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From Q-BRIDGE-MIB

VlanIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
StorageType
TruthValue

How to Use in IPNetwork Monitor

Example using ieee8021BridgeEvbVDPCommandsSucceeded OID:

Select a device implementing IEEE8021-EVB-MIB as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ieee8021BridgeEvbVDPCommandsSucceeded into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object specifies the VDP number of successful commands since creation. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ieee8021BridgeEvbMib	1.3.111.2.802.1.1.24			The EVB MIB module for managing devices that support Edge Virtual Bridging. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2018). This version of this MIB module is part of IEEE Std 802.1Q; see the draft itself for full legal notices.
ieee8021BridgeEvbNotifications	1.3.111.2.802.1.1.24.0
ieee8021BridgeEvbObjects	1.3.111.2.802.1.1.24.1
ieee8021BridgeEvbSys	1.3.111.2.802.1.1.24.1.1
INT ieee8021BridgeEvbSysType	1.3.111.2.802.1.1.24.1.1.1	INTEGER	read-only	The evbSysType determines if this is an EVB Bridge or EVB station.
U32 ieee8021BridgeEvbSysNumExternalPorts	1.3.111.2.802.1.1.24.1.1.2	Unsigned32	read-only	The evbSysNumExternalPorts parameter indicates how many externally accessible port are available.
T/F ieee8021BridgeEvbSysEvbLldpTxEnable	1.3.111.2.802.1.1.24.1.1.3	TruthValue	read-write	This object is used to initialize the LLDP EVB objects for new SBPs and URPS. When set to 'true' a new SBP or URP will place the local EVB objects in the LLDP nearest Customer database; when set to 'false' a new SBP or URP will not place the local EVB objects in the LLDP database.
T/F ieee8021BridgeEvbSysEvbLldpManual	1.3.111.2.802.1.1.24.1.1.4	TruthValue	read-write	This object is used to initialize the LLDP EVB objects for new SBPs and URPS. When set to 'false' the operating configuration will be determined by the comparison between the local and remote LLDP EVB objects (automatic), regardless of the setting of ieee8021BridgeEvbSysLldpTxEnable. When ieee8021BridgeEvbSysLldpManual is 'true' the configuration will be determined by the setting of the local EVB objects only (manual).
T/F ieee8021BridgeEvbSysEvbLldpGidCapable	1.3.111.2.802.1.1.24.1.1.5	TruthValue	read-write	The value of this object is used as the default value of the BGID or SGID bit of the EVB LLDP TLV string.
I32 ieee8021BridgeEvbSysEcpAckTimer	1.3.111.2.802.1.1.24.1.1.6	Integer32	read-write	A value indicating the Bridge Proposed ECP ackTimer.
I32 ieee8021BridgeEvbSysEcpMaxRetries	1.3.111.2.802.1.1.24.1.1.7	Integer32	read-write	A value indicating the Bridge ECP maxRetries.
I32 ieee8021BridgeEvbSysVdpDfltRsrcWaitDelay	1.3.111.2.802.1.1.24.1.1.8	Integer32	read-write	A value indicating the Bridge Resource VDP Timeout.
I32 ieee8021BridgeEvbSysVdpDfltReinitKeepAlive	1.3.111.2.802.1.1.24.1.1.9	Integer32	read-write	A value indicating the Bridge Proposed VDP Keep Alive Timeout.
ieee8021BridgeEvbSbpTable	1.3.111.2.802.1.1.24.1.1.10		not-accessible	A table that contains Station-facing Bridge Port (SBP) details.
ieee8021BridgeEvbSbpEntry	1.3.111.2.802.1.1.24.1.1.10.1		not-accessible	A list of objects describing SBP.
OID ieee8021BridgeEvbSbpComponentID	1.3.111.2.802.1.1.24.1.1.10.1.1	IEEE8021PbbComponentIdentifier	not-accessible	The SBP component ID
IEE ieee8021BridgeEvbSbpPortNumber	1.3.111.2.802.1.1.24.1.1.10.1.2	IEEE8021BridgePortNumber	not-accessible	The SBP port number.
T/F ieee8021BridgeEvbSbpLldpManual	1.3.111.2.802.1.1.24.1.1.10.1.3	TruthValue	read-write	The evbSbpLldpManual parameter switches EVB TLVs to manual mode. In manual mode the running parameters are determined solely from the local LLDP database values.
U32 ieee8021BridgeEvbSbpVdpOperRsrcWaitDelay	1.3.111.2.802.1.1.24.1.1.10.1.4	Unsigned32	read-only	The value used to initialize the waitWhile timer (41.5.5.7) by the station VDP state machine when the state machine is waiting for a response.
U32 ieee8021BridgeEvbSbpVdpOperReinitKeepAlive	1.3.111.2.802.1.1.24.1.1.10.1.5	Unsigned32	read-only	The value used to initialize the waitWhile timer (41.5.5.5) by the station VDP state machine in order to determine when to transmit a keep alive message.
U32 ieee8021BridgeEvbSbpVdpOperToutKeepAlive	1.3.111.2.802.1.1.24.1.1.10.1.6	Unsigned32	read-only	The value used to initialize the waitWhile timer (41.5.5.13) by the EVBCB VDP state machine in order to determine when to transmit a keep alive message.
U32 ieee8021BridgeEvbSbpVdpOperRsrcWaitDelayExp	1.3.111.2.802.1.1.24.1.1.10.1.7	Unsigned32	read-only	The exponent of 2 used to calculate the value to initialize the waitWhile timer (41.5.5.7) by the station VDP state machine when the state machine is waiting for a response.
U32 ieee8021BridgeEvbSbpVdpOperReinitKeepAliveExp	1.3.111.2.802.1.1.24.1.1.10.1.8	Unsigned32	read-only	The exponent of 2 used to calculate the value to initialize the waitWhile timer (41.5.5.5) by the station VDP state machine in order to determine when to transmit a keep alive message.
I32 ieee8021BridgeEvbSysEcpDfltAckTimerExp	1.3.111.2.802.1.1.24.1.1.11	Integer32	read-write	The exponent of 2 indicating the Bridge Proposed ECP ackTimer in tens of microseconds.
I32 ieee8021BridgeEvbSysVdpDfltRsrcWaitDelayExp	1.3.111.2.802.1.1.24.1.1.12	Integer32	read-write	The exponent of 2 indicating the Bridge Resource VDP Timeout in tens of microseconds.
I32 ieee8021BridgeEvbSysVdpDfltReinitKeepAliveExp	1.3.111.2.802.1.1.24.1.1.13	Integer32	read-write	The exponent of 2 indicating the Bridge Proposed VDP Keep Alive Timeout in tens of microseconds.
ieee8021BridgeEvbVSIDBObjects	1.3.111.2.802.1.1.24.1.2
ieee8021BridgeEvbVSIDBTable	1.3.111.2.802.1.1.24.1.2.1		not-accessible	A table that contains database of the active Virtual Station Interfaces.
ieee8021BridgeEvbVSIDBEntry	1.3.111.2.802.1.1.24.1.2.1.1		not-accessible	A list of objects containing database of the active Virtual Station Interfaces.
OID ieee8021BridgeEvbVSIComponentID	1.3.111.2.802.1.1.24.1.2.1.1.1	IEEE8021PbbComponentIdentifier	not-accessible	The evbVSIComponentID is the ComponentID for the C-VLAN component of the EVB Bridge or for the edge relay of the EVB station.
IEE ieee8021BridgeEvbVSIPortNumber	1.3.111.2.802.1.1.24.1.2.1.1.2	IEEE8021BridgePortNumber	not-accessible	The evbVSIPortNumber is the Port Number for the SBP or URP where the VSI is accessed.
INT ieee8021BridgeEvbVSIIDType	1.3.111.2.802.1.1.24.1.2.1.1.3	INTEGER	not-accessible	This object specifies the VSIID Type for the VSIID in the DCN
OCT ieee8021BridgeEvbVSIID	1.3.111.2.802.1.1.24.1.2.1.1.4	OCTET STRING	not-accessible	This object specifies the VSIID that uniquely identifies the VSI in the DCN
U32 ieee8021BridgeEvbVSITimeSinceCreate	1.3.111.2.802.1.1.24.1.2.1.1.5	Unsigned32	read-only	This object specifies the time since creation
INT ieee8021BridgeEvbVsiVdpOperCmd	1.3.111.2.802.1.1.24.1.2.1.1.6	INTEGER	read-only	This object identifies the type of TLV.
T/F ieee8021BridgeEvbVsiOperRevert	1.3.111.2.802.1.1.24.1.2.1.1.7	TruthValue	read-only	The evbOperRevert status indicator shows the most recent value of the KEEP indicator from the VDP protocol exchange.
T/F ieee8021BridgeEvbVsiOperHard	1.3.111.2.802.1.1.24.1.2.1.1.8	TruthValue	read-only	The evbVsiHard status indicator shows the most recent value of the HARD indicator from the VDP protocol exchange.
BIT ieee8021BridgeEvbVsiOperReason	1.3.111.2.802.1.1.24.1.2.1.1.9	Bits	read-only	This object indicates the outcome of a request.
OCT ieee8021BridgeEvbVSIMgrID	1.3.111.2.802.1.1.24.1.2.1.1.10	OCTET STRING	read-only	This object identifies the VSI Manager with a database that holds the detailed VSI type and or instance definitions.
I32 ieee8021BridgeEvbVSIType	1.3.111.2.802.1.1.24.1.2.1.1.11	Integer32	read-only	The VTID is an integer value used to identify a pre-configured set of controls and attributes that are associated with a set of VSIs.
OCT ieee8021BridgeEvbVSITypeVersion	1.3.111.2.802.1.1.24.1.2.1.1.12	OCTET STRING	read-only	The VSI Type Version is an integer identifier designating the expected/desired VTID version. The VTID version allows a VSI Manager Database to contain multiple versions of a given VSI Type, allowing smooth migration to newer VSI types.
INT ieee8021BridgeEvbVSIMvFormat	1.3.111.2.802.1.1.24.1.2.1.1.13	INTEGER	read-only	This object specifies the MAC/VLAN format. basic - Basic MAC/VLAN format partial - Partial MAC/VLAN format vlanOnly - Vlan-only MAC/VLAN format
I32 ieee8021BridgeEvbVSINumMACs	1.3.111.2.802.1.1.24.1.2.1.1.14	Integer32	read-only	This object specifies the the number of MAC address/VLAN ID pairs contained in the repeated portion of the MAC/VLANs field in the VDP TLV.
INT ieee8021BridgeEvbVDPMachineState	1.3.111.2.802.1.1.24.1.2.1.1.15	INTEGER	read-only	This object specifies the VDP state machine.
C32 ieee8021BridgeEvbVDPCommandsSucceededEx	1.3.111.2.802.1.1.24.1.2.1.1.16	Counter32	read-only	This object specifies the VDP number of successful commands since creation.
C32 ieee8021BridgeEvbVDPCommandsFailed	1.3.111.2.802.1.1.24.1.2.1.1.17	Counter32	read-only	This object specifies the VDP number of failed commands since creation
C32 ieee8021BridgeEvbVDPCommandReverts	1.3.111.2.802.1.1.24.1.2.1.1.18	Counter32	read-only	This object specifies the VDP command reverts since creation
TIK ieee8021BridgeEvbVDPCounterDiscontinuity	1.3.111.2.802.1.1.24.1.2.1.1.19	TimeTicks	read-only	The time (in hundredths of a second) since the last counter discontinuity for any of the counters in the row.
OCT ieee8021BridgeEvbVSIMgrID16	1.3.111.2.802.1.1.24.1.2.1.1.20	OCTET STRING	read-only	This object identifies the VSI Manager with a database that holds the detailed VSI type and or instance definitions.
INT ieee8021BridgeEvbVSIFilterFormat	1.3.111.2.802.1.1.24.1.2.1.1.21	INTEGER	read-only	This object specifies the MAC/VLAN format: vid (see 41.2.9.1) macVid (see 41.2.9.2) groupidVid (see 41.2.9.3) groupidMacVid (see 41.2.9.4)
ieee8021BridgeEvbVSIDBMacTable	1.3.111.2.802.1.1.24.1.2.2		not-accessible	A table that contains database of the active Virtual Station Interfaces.
ieee8021BridgeEvbVSIDBMacEntry	1.3.111.2.802.1.1.24.1.2.2.1		not-accessible	A list of objects containing database of the MAC/VLANs associated with Virtual Station Interfaces.
U32 ieee8021BridgeEvbGroupID	1.3.111.2.802.1.1.24.1.2.2.1.1	Unsigned32	not-accessible	Group ID
MAC ieee8021BridgeEvbVSIMac	1.3.111.2.802.1.1.24.1.2.2.1.2	MacAddress	not-accessible	The mac-address part of the MAC/VLANs for a VSI.
VLA ieee8021BridgeEvbVSIVlanId	1.3.111.2.802.1.1.24.1.2.2.1.3	VlanIndex	read-only	The Vlan ID part of the MAC/VLANs for a VSI.
ieee8021BridgeEvbSChannelObjects	1.3.111.2.802.1.1.24.1.3
ieee8021BridgeEvbUAPConfigTable	1.3.111.2.802.1.1.24.1.3.1		not-accessible	A table that contains configuration parameters for UAP.
ieee8021BridgeEvbUAPConfigEntry	1.3.111.2.802.1.1.24.1.3.1.1		not-accessible	A list of objects containing information to configure the attributes for UAP.
OID ieee8021BridgeEvbUAPComponentId	1.3.111.2.802.1.1.24.1.3.1.1.1	IEEE8021PbbComponentIdentifier	read-only	The ComponentID of the port for the UAP.
IEE ieee8021BridgeEvbUAPPort	1.3.111.2.802.1.1.24.1.3.1.1.2	IEEE8021BridgePortNumber	read-only	The port number of the port for the UAP.
NUM ieee8021BridgeEvbUapConfigIfIndex	1.3.111.2.802.1.1.24.1.3.1.1.3	InterfaceIndexOrZero	read-only	The value of the instance of the IfIndex object, defined in the IF-MIB, for the interface corresponding to this port, or the value 0 if the port has not been bound to an underlying frame source and sink.
INT ieee8021BridgeEvbUAPSchCdcpAdminEnable	1.3.111.2.802.1.1.24.1.3.1.1.4	INTEGER	read-create	Administrative staus of CDCP.
INT ieee8021BridgeEvbUAPSchAdminCDCPRole	1.3.111.2.802.1.1.24.1.3.1.1.5	INTEGER	read-create	The administratively configured value for the local port's role parameter. The value of AdminRole is not reflected in the S-channel TLV. The AdminRole may take the value S or B. S indicates the sender is unwilling to accept S-channels configuration (mode, # channels supported, channel index) from its neighbor and that the sender is willing to accept SVID assignments from the neighbor. Stations usually take the S role. B indicates the sender is willing to accept S-channels configuration (mode, # channels supported, channel index) from its neighbor and that the sender is willing do the best it can to fill the SVID assignments from the neighbor. Bridges usually take the B role.
I32 ieee8021BridgeEvbUAPSchAdminCDCPChanCap	1.3.111.2.802.1.1.24.1.3.1.1.6	Integer32	read-create	The administratively configured value for the Number of Channels supported parameter. This value is included as the ChanCap parameter in the S-channel TLV.
I32 ieee8021BridgeEvbUAPSchOperCDCPChanCap	1.3.111.2.802.1.1.24.1.3.1.1.7	Integer32	read-only	The operational value for the Number of Channels supported parameter. This value is included as the ChnCap parameter in the S-channel TLV.
VLA ieee8021BridgeEvbUAPSchAdminCDCPSVIDPoolLow	1.3.111.2.802.1.1.24.1.3.1.1.8	VlanIndex	read-create	Determines the lowest S-VIDs available for assignment by CDCP.
VLA ieee8021BridgeEvbUAPSchAdminCDCPSVIDPoolHigh	1.3.111.2.802.1.1.24.1.3.1.1.9	VlanIndex	read-create	Determines the highest S-VIDs available for assignment by CDCP.
INT ieee8021BridgeEvbUAPSchOperState	1.3.111.2.802.1.1.24.1.3.1.1.10	INTEGER	read-only	The current runnning state of CDCP.
INT ieee8021BridgeEvbSchCdcpRemoteEnabled	1.3.111.2.802.1.1.24.1.3.1.1.11	INTEGER	read-only	CDCP state for the remote S-channel.
INT ieee8021BridgeEvbSchCdcpRemoteRole	1.3.111.2.802.1.1.24.1.3.1.1.12	INTEGER	read-only	The value for the remote port's role parameter.
STO ieee8021BridgeEvbUAPConfigStorageType	1.3.111.2.802.1.1.24.1.3.1.1.13	StorageType	read-create	The storage type for this row. Rows in this table that were created through an external process may have a storage type of readOnly or permanent. For a storage type of permanent, none of the columns have to be writable.
ROW ieee8021BridgeEvbUAPConfigRowStatus	1.3.111.2.802.1.1.24.1.3.1.1.14	RowStatus	read-create	RowStatus for creating a UAP table entry.
ieee8021BridgeEvbCAPConfigTable	1.3.111.2.802.1.1.24.1.3.2		not-accessible	A table that contains configuration information for the S-Channel Access Ports (CAP).
ieee8021BridgeEvbCAPConfigEntry	1.3.111.2.802.1.1.24.1.3.2.1		not-accessible	A list of objects containing information for the S-Channel Access Ports (CAP)
U32 ieee8021BridgeEvbSchID	1.3.111.2.802.1.1.24.1.3.2.1.1	Unsigned32	not-accessible	This object represents the SVID for a ieee8021BridgeEvbSysType of evbBridge and a SCID(S-Channel ID) for a ieee8021BridgeEvbSysType of evbStation.
OID ieee8021BridgeEvbCAPComponentId	1.3.111.2.802.1.1.24.1.3.2.1.2	IEEE8021PbbComponentIdentifier	read-only	Component ID for S-channel Access Port.
NUM ieee8021BridgeEvbCapConfigIfIndex	1.3.111.2.802.1.1.24.1.3.2.1.3	InterfaceIndexOrZero	read-only	The value of the instance of the IfIndex object, defined in the IF-MIB, for the interface corresponding to this port, or the value 0 if the port has not been bound to an underlying frame source and sink. The underlying IfEntry indexed by this column MUST be persistent across reinitializations of the management system.
IEE ieee8021BridgeEvbCAPPort	1.3.111.2.802.1.1.24.1.3.2.1.4	IEEE8021BridgePortNumber	read-only	Port number for the S-Channel Access Port.
U32 ieee8021BridgeEvbCAPSChannelID	1.3.111.2.802.1.1.24.1.3.2.1.5	Unsigned32	read-only	S-Channel ID (SCID) for this CAP.
OID ieee8021BridgeEvbCAPAssociateSBPOrURPCompID	1.3.111.2.802.1.1.24.1.3.2.1.6	IEEE8021PbbComponentIdentifier	read-write	Component ID of the Server Edge Port to be associated with the CAP.
IEE ieee8021BridgeEvbCAPAssociateSBPOrURPPort	1.3.111.2.802.1.1.24.1.3.2.1.7	IEEE8021BridgePortNumber	read-write	Port number of the Server Edge Port to be associated with the CAP.
ROW ieee8021BridgeEvbCAPRowStatus	1.3.111.2.802.1.1.24.1.3.2.1.8	RowStatus	read-create	RowStatus to create/destroy this table.
ieee8021BridgeEvbURPTable	1.3.111.2.802.1.1.24.1.3.3		not-accessible	A table that contains configuration information for the Uplink Relay Ports(URP).
ieee8021BridgeEvbURPEntry	1.3.111.2.802.1.1.24.1.3.3.1		not-accessible	A list of objects containing information for the Uplink Relay Ports(URP).
OID ieee8021BridgeEvbURPComponentId	1.3.111.2.802.1.1.24.1.3.3.1.1	IEEE8021PbbComponentIdentifier	not-accessible	Component ID that the URP belongs to.
IEE ieee8021BridgeEvbURPPort	1.3.111.2.802.1.1.24.1.3.3.1.2	IEEE8021BridgePortNumber	not-accessible	port number of the urp.
NUM ieee8021BridgeEvbURPIfIndex	1.3.111.2.802.1.1.24.1.3.3.1.3	InterfaceIndexOrZero	read-write	The value of the instance of the IfIndex object, defined in the IF-MIB, for the interface corresponding to this port, or the value 0 if the port has not been bound to an underlying frame source and sink. It is an implementation specific decision as to whether this object may be modified if it has been created or if 0 is a legal value. The underlying IfEntry indexed by this column MUST be persistent across reinitializations of the management system.
IEE ieee8021BridgeEvbURPBindToISSPort	1.3.111.2.802.1.1.24.1.3.3.1.4	IEEE8021BridgePortNumber	read-write	The evbURPBindToISSPort is the ISS Port Number where the URP is attached. This binding is optional and only required in some systems.
T/F ieee8021BridgeEvbURPLldpManual	1.3.111.2.802.1.1.24.1.3.3.1.6	TruthValue	read-write	The evbUrpLldpManual parameter control how the EVB TLV determines the operating values for parameters. When set TRUE only the local EVB TLV will be used to determine the parameters.
U32 ieee8021BridgeEvbURPVdpOperRsrcWaitDelay	1.3.111.2.802.1.1.24.1.3.3.1.9	Unsigned32	read-only	The parameter evbURPVdpOperRsrcWaitDelay is the exponent of 2 used to set the VDP resourceWaitDelay timer at the EVB Bridge.
U32 ieee8021BridgeEvbURPVdpOperRespWaitDelay	1.3.111.2.802.1.1.24.1.3.3.1.10	Unsigned32	read-write	The evbUrpVdpOperRespWaitDelay is how long a EVb station VDP will wait for a response from the EVB Bridge VDP.
U32 ieee8021BridgeEvbURPVdpOperReinitKeepAlive	1.3.111.2.802.1.1.24.1.3.3.1.11	Unsigned32	read-write	The evbURPVdpOperReinitKeepAlive is the exponent of 2 used to determine the time interval of Keep Alives transmitted by the EVB station.
U32 ieee8021BridgeEvbURPVdpOperRsrcWaitDelayExp	1.3.111.2.802.1.1.24.1.3.3.1.12	Unsigned32	read-only	The parameter evbURPVdpOperRsrcWaitDelay is the exponent of 2 used to set the VDP resourceWaitDelay timer at the EVB Bridge.
U32 ieee8021BridgeEvbURPVdpOperReinitKeepAliveExp	1.3.111.2.802.1.1.24.1.3.3.1.13	Unsigned32	read-write	The evbURPVdpOperReinitKeepAlive is the exponent of 2 used to determine the time interval of Keep Alives transmitted by the EVB station.
ieee8021BridgeEvbEcpTable	1.3.111.2.802.1.1.24.1.3.4		not-accessible	A table that contains configuration information for the Edge Control Protocol (ECP).
ieee8021BridgeEvbEcpEntry	1.3.111.2.802.1.1.24.1.3.4.1		not-accessible	A list of objects containing information for theEdge Control Protocol (ECP).
OID ieee8021BridgeEvbEcpComponentId	1.3.111.2.802.1.1.24.1.3.4.1.1	IEEE8021PbbComponentIdentifier	not-accessible	Component ID .
IEE ieee8021BridgeEvbEcpPort	1.3.111.2.802.1.1.24.1.3.4.1.2	IEEE8021BridgePortNumber	not-accessible	Port number.
U32 ieee8021BridgeEvbEcpOperAckTimerInit	1.3.111.2.802.1.1.24.1.3.4.1.3	Unsigned32	read-only	The initial value used to initialize ackTimer (43.3.6.1).
U32 ieee8021BridgeEvbEcpOperMaxRetries	1.3.111.2.802.1.1.24.1.3.4.1.4	Unsigned32	read-only	This integer variable defines the maximum number of times that the ECP transmit state machine will retry a transmission if no ACK is received.
C32 ieee8021BridgeEvbEcpTxFrameCount	1.3.111.2.802.1.1.24.1.3.4.1.5	Counter32	read-only	The evbECPTxFrameCount is the number of ECP frame transmitted since ECP was instanciated.
C32 ieee8021BridgeEvbEcpTxRetryCount	1.3.111.2.802.1.1.24.1.3.4.1.6	Counter32	read-only	The evbECPTxRetryCount is the number of times ECP re-tried transmission since ECP was instanciated.
C32 ieee8021BridgeEvbEcpTxFailures	1.3.111.2.802.1.1.24.1.3.4.1.7	Counter32	read-only	The evbECPTxFailures is the number of times ECP failed to successfully deliver a frame since ECP was instanciated.
C32 ieee8021BridgeEvbEcpRxFrameCount	1.3.111.2.802.1.1.24.1.3.4.1.8	Counter32	read-only	The evbECPRxFrameCount is the number of frames received since ECP was instanciated.
U32 ieee8021BridgeEvbEcpOperAckTimerInitExp	1.3.111.2.802.1.1.24.1.3.4.1.9	Unsigned32	read-only	The initial value used to initialize ackTimer. Expressed as exp where 10*2exp microseconds is the duration of the ack timer(43.3.6.1).
ieee8021BridgeEvbConformance	1.3.111.2.802.1.1.24.2
ieee8021BridgeEvbGroups	1.3.111.2.802.1.1.24.2.1
ieee8021BridgeEvbSysGroup	1.3.111.2.802.1.1.24.2.1.1			The collection of objects used to represent a EVB management objects.
ieee8021BridgeEvbSbpGroup	1.3.111.2.802.1.1.24.2.1.3			The collection of objects used to represent a SBP management objects.
ieee8021BridgeEvbVSIDBGroup	1.3.111.2.802.1.1.24.2.1.4			The collection of objects used to represent a EVB VSI DB table.
ieee8021BridgeEvbUAPGroup	1.3.111.2.802.1.1.24.2.1.5			The collection of objects used to represent a EVB UAP table.
ieee8021BridgeEvbCAPConfigGroup	1.3.111.2.802.1.1.24.2.1.6			The collection of objects used to represent a EVB CAP management objects.
ieee8021BridgeEvbsURPGroup	1.3.111.2.802.1.1.24.2.1.7			The collection of objects used to represent a EVBS URP management objects.
ieee8021BridgeEvbEcpGroup	1.3.111.2.802.1.1.24.2.1.8			The collection of objects used to represent a EVB CAP management objects.
ieee8021BridgeEvbSysV2Group	1.3.111.2.802.1.1.24.2.1.9			The collection of objects used to represent a EVB management objects.
ieee8021BridgeEvbSbpV2Group	1.3.111.2.802.1.1.24.2.1.10			The collection of objects used to represent a SBP management objects.
ieee8021BridgeEvbVSIDBV2Group	1.3.111.2.802.1.1.24.2.1.11			The collection of objects used to represent a EVB VSI DB table.
ieee8021BridgeEvbsURPV2Group	1.3.111.2.802.1.1.24.2.1.12			The collection of objects used to represent a EVBS URP management objects.
ieee8021BridgeEvbEcpV2Group	1.3.111.2.802.1.1.24.2.1.13			The collection of objects used to represent a EVB CAP management objects.
ieee8021BridgeEvbCompliances	1.3.111.2.802.1.1.24.2.2
ieee8021BridgeEvbbCompliance	1.3.111.2.802.1.1.24.2.2.1			The compliance statement for devices supporting EVB as defined in IEEE 802.1Q.
ieee8021BridgeEvbsCompliance	1.3.111.2.802.1.1.24.2.2.2			The compliance statement for devices supporting EVBS as defined in IEEE 802.1Q.
ieee8021BridgeEvbbComplianceV2	1.3.111.2.802.1.1.24.2.2.3			The compliance statement for devices supporting EVB as defined in IEEE 802.1Q.
ieee8021BridgeEvbsComplianceV2	1.3.111.2.802.1.1.24.2.2.4			The compliance statement for devices supporting EVBS as defined in IEEE 802.1Q.

RFC description

Manages Edge Virtual Bridging (EVB) functionality for IEEE 802.1 compliant bridges and stations.

Start monitoring Vendor-neutral IEEE 802.1Qbg standard (Edge Virtual Bridging network device) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IEEE8021-EVB-MIB