HUAWEI-TRANSPARENTBRIDGE-MIB

All MIBs › HUAWEI-TRANSPARENTBRIDGE-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2015-05-08

Category: Technology: Switching/L2, VLAN and Bridging, Vendor: Huawei

Description: Huawei transparent bridging MIB for managing MAC forwarding tables, bridge ports, and Ethernet bridging configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-TRANSPARENTBRIDGE-MIB?

HUAWEI-TRANSPARENTBRIDGE-MIB is a Huawei enterprise MIB for managing transparent bridging functionality on Huawei network devices, i.e., Layer 2 forwarding of frames between ports without routing. It exposes configuration and status data organized under objects such as hwTPBridgeMngObjects, hwTPBridgeBase, and hwTPBridgeApply, covering bridge base settings and the application of bridging policy to specific ports or interfaces. Its monitoring value is in confirming that bridge instances and their port associations are correctly configured and operationally active, which is essential software-level visibility for diagnosing unexpected Layer 2 forwarding behavior. It complements standard bridge MIBs (e.g., BRIDGE-MIB) that report the underlying forwarding-table entries, adding Huawei-specific management objects on top. Deployment context is Huawei switches or routers used to bridge legacy or mixed-media network segments transparently. Network engineers evaluating or troubleshooting this functionality can download the HUAWEI-TRANSPARENTBRIDGE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-TRANSPARENTBRIDGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei switch
Huawei router with bridging support

Monitoring Examples

An administrator would examine hwTPBridgeBase settings and hwTPBridgeApply entries to confirm a given port is correctly enabled for transparent bridging, and an unexpected disabled or misapplied entry under hwTPBridgeApply would explain why traffic is not being bridged between two interfaces as expected.

What Can Be Monitored

transparent bridge base configuration
bridge port application status
bridging management objects

Imported Objects

From HUAWEI-BASE-TRAP-MIB

hwBaseTrapEventType	OBJECT-TYPE
hwBaseTrapProbableCause	OBJECT-TYPE
hwBaseTrapSeverity	OBJECT-TYPE

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From P-BRIDGE-MIB

EnabledStatus

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using hwTPBridgeStatInTotalPkts OID:

Select a Huawei switch or router with bridging support (transparent bridging) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwTPBridgeStatInTotalPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of received packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwTransparentBridgeMIB	1.3.6.1.4.1.2011.5.25.242
hwTransparentBridge	1.3.6.1.4.1.2011.5.25.242.1			The TransparentBridge MIB module is defined to manage TransparentBridge function of Huawei Technologies co.,Ltd.
hwTPBridgeMngObjects	1.3.6.1.4.1.2011.5.25.242.1.1
hwTPBridgeBase	1.3.6.1.4.1.2011.5.25.242.1.1.1
hwTPBridgeMIBTable	1.3.6.1.4.1.2011.5.25.242.1.1.1.1		not-accessible	The table contains basic information for the bridge. The indexes of this table is hwTPBridgeId.
hwTPBridgeMIBEntry	1.3.6.1.4.1.2011.5.25.242.1.1.1.1.1		not-accessible	Entries of TransparentBridge MIB table. The indexes of this entry is hwTPBridgeId.
I32 hwTPBridgeId	1.3.6.1.4.1.2011.5.25.242.1.1.1.1.1.1	Integer32	not-accessible	The identifier of this bridge.
ENA hwTPBridgeMacLearn	1.3.6.1.4.1.2011.5.25.242.1.1.1.1.1.2	EnabledStatus	read-create	The value indicates whether the MAC address learning is opened. The value enabled(1) indicates learning is allowed. Default value is enabled(1).
ENA hwTPBridgeRoutingIp	1.3.6.1.4.1.2011.5.25.242.1.1.1.1.1.3	EnabledStatus	read-create	The value indicates which routing ip function is opened. The value enabled(1) indicates routing ip is allowed. Default value is disable(2).
ENA hwTPBridgeBridgingIp	1.3.6.1.4.1.2011.5.25.242.1.1.1.1.1.4	EnabledStatus	read-create	The value indicates which bridging ip function is opened. The value enabled(1) indicates bridging ip is allowed. Default value is enabled(1).
ENA hwTPBridgeBridgingOther	1.3.6.1.4.1.2011.5.25.242.1.1.1.1.1.5	EnabledStatus	read-create	The value indicates which bridging other protocol function is opened. The value enabled(1) indicates bridging other protocol is allowed. Default value is enabled(1).
ENA hwTPBridgeAdminStatus	1.3.6.1.4.1.2011.5.25.242.1.1.1.1.1.6	EnabledStatus	read-create	Value disable(2) indicates shutdown the bridge; enabled(1) indicates open the bridge.
ROW hwTPBridgeRowStatus	1.3.6.1.4.1.2011.5.25.242.1.1.1.1.1.7	RowStatus	read-create	Operation status.
hwTPBridgeMemberMIBTable	1.3.6.1.4.1.2011.5.25.242.1.1.1.2		not-accessible	The table contains basic information for the bridge membership. The indexes of this table are hwTPBridgeId, hwTPBridgeMemberIfIndex.
hwTPBridgeMemberMIBEntry	1.3.6.1.4.1.2011.5.25.242.1.1.1.2.1		not-accessible	Entries of TransparentBridge member MIB table. The indexes of this entry are hwTPBridgeId, hwTPBridgeMemberIfIndex.
NUM hwTPBridgeMemberIfIndex	1.3.6.1.4.1.2011.5.25.242.1.1.1.2.1.1	InterfaceIndex	not-accessible	The IfIndex of this bridge member.
ENA hwTPBridgeMemberVlanTransparent	1.3.6.1.4.1.2011.5.25.242.1.1.1.2.1.2	EnabledStatus	read-create	The value indicates whether the VLAN transparent is opened. The value enabled(1) indicates VLAN transparent is allowed. Default value is disabled(2).
ROW hwTPBridgeMemberRowStatus	1.3.6.1.4.1.2011.5.25.242.1.1.1.2.1.3	RowStatus	read-create	Operation status.
hwTPBridgeApply	1.3.6.1.4.1.2011.5.25.242.1.1.2
hwTPBridgeStatTable	1.3.6.1.4.1.2011.5.25.242.1.1.2.1		not-accessible	The table contains statistics information for the bridge. The indexes of this table is hwTPBridgeStatBridgeId.
hwTPBridgeStatEntry	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1		not-accessible	Entries of bridge statistics table. The indexes of this entry is hwTPBridgeStatBridgeId.
I32 hwTPBridgeStatBridgeId	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.1	Integer32	not-accessible	The bridge-id.
C64 hwTPBridgeStatInTotalPktsEx	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.2	Counter64	read-only	The number of received packets.
C64 hwTPBridgeStatInBPDUPkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.3	Counter64	read-only	The number of BPDU packets received.
C64 hwTPBridgeStatInUcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.4	Counter64	read-only	The number of unicast packets received.
C64 hwTPBridgeStatInMcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.5	Counter64	read-only	The number of multicast packets received.
C64 hwTPBridgeStatInBcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.6	Counter64	read-only	The number of broadcast packets received.
C64 hwTPBridgeStatOutTotalPkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.7	Counter64	read-only	The number of sent packets.
C64 hwTPBridgeStatOutBPDUPkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.8	Counter64	read-only	The number of BPDU packets sent.
C64 hwTPBridgeStatOutUcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.9	Counter64	read-only	The number of unicast packets sent.
C64 hwTPBridgeStatOutMcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.10	Counter64	read-only	The number of multicast packets sent.
C64 hwTPBridgeStatOutBcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.11	Counter64	read-only	The number of broadcast packets sent.
ENA hwTPBridgeStatResetFlag	1.3.6.1.4.1.2011.5.25.242.1.1.2.1.1.12	EnabledStatus	read-write	The flag of reset.
hwTPBridgeMemberStatTable	1.3.6.1.4.1.2011.5.25.242.1.1.2.2		not-accessible	The table contains statistics information for the member of bridge. The indexes of this table is hwTPBridgeMemberStatIfIndex.
hwTPBridgeMemberStatEntry	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1		not-accessible	Entries of bridge member statistics table. The indexes of this entry is hwTPBridgeMemberStatIfIndex.
NUM hwTPBridgeMemberStatIfIndex	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.1	InterfaceIndex	not-accessible	The IfIndex of this bridge member.
C64 hwTPBridgeMemberStatInTotalPkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.2	Counter64	read-only	The number of received packets.
C64 hwTPBridgeMemberStatInBPDUPkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.3	Counter64	read-only	The number of BPDU packets received.
C64 hwTPBridgeMemberStatInUcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.4	Counter64	read-only	The number of unicast packets received.
C64 hwTPBridgeMemberStatInMcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.5	Counter64	read-only	The number of multicast packets received.
C64 hwTPBridgeMemberStatInBcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.6	Counter64	read-only	The number of broadcast packets received.
C64 hwTPBridgeMemberStatOutTotalPkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.7	Counter64	read-only	The number of sent packets.
C64 hwTPBridgeMemberStatOutBPDUPkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.8	Counter64	read-only	The number of BPDU packets sent.
C64 hwTPBridgeMemberStatOutUcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.9	Counter64	read-only	The number of unicast packets sent.
C64 hwTPBridgeMemberStatOutMcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.10	Counter64	read-only	The number of multicast packets sent.
C64 hwTPBridgeMemberStatOutBcastkts	1.3.6.1.4.1.2011.5.25.242.1.1.2.2.1.11	Counter64	read-only	The number of broadcast packets sent.
hwTPBridgeConformance	1.3.6.1.4.1.2011.5.25.242.1.2
hwTPBridgeCompliances	1.3.6.1.4.1.2011.5.25.242.1.2.1
hwTPBridgeCompliance	1.3.6.1.4.1.2011.5.25.242.1.2.1.1			The core compliance statement for all implementations.
hwTPBridgeGroups	1.3.6.1.4.1.2011.5.25.242.1.2.2
hwTPBridgeGroup	1.3.6.1.4.1.2011.5.25.242.1.2.2.1
hwTPBridgeMemberGroup	1.3.6.1.4.1.2011.5.25.242.1.2.2.2
hhwTPBridgeStatGroup	1.3.6.1.4.1.2011.5.25.242.1.2.2.3
hwTPBridgeMemberStatGroup	1.3.6.1.4.1.2011.5.25.242.1.2.2.4

RFC description

Huawei MIB module that defines managed objects for transparent bridging functionality in Huawei network devices, used for SNMP-based management and monitoring.

Start monitoring Huawei switch or router with bridging support (transparent bridging) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-TRANSPARENTBRIDGE-MIB