IBM2216-MIB

All MIBs › IBM2216-MIB

Category: ATM, Vendor: IBM

Description: IBM MIB for the IBM 2216 Nways Multiaccess Connector providing ATM and LAN emulation management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IBM2216-MIB?

This is IBM's private MIB for the IBM 2216 Nways Multiaccess Connector, a multiprotocol router/ATM-LAN-emulation platform from IBM's Nways networking line. It exposes hardware inventory and status data for the device's modular PCI adapter cards and their ports, along with a mapping between physical ports and standard interface indices. Its emphasis is clearly on hardware status monitoring: each PCI adapter's type and operational status are tracked per slot, letting an operator detect a failed, missing, or degraded adapter card in a specific chassis slot. It complements the standard IF-MIB by mapping physical slot/port identifiers to ifIndex values, so interface-level statistics from IF-MIB can be correlated back to a specific piece of hardware. It was deployed on IBM 2216 routers used as multiprotocol WAN/ATM aggregation points in enterprise networks during the mid-to-late 1990s and early 2000s. Engineers can download the IBM2216-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in IBM2216-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

IBM 2216 Nways Multiaccess Connector

Monitoring Examples

An admin would poll ibm2216PCIAdapTable/ibm2216PCIAdapEntry, indexed by ibm2216PCIAdapSlotNum, to read ibm2216PCIAdapType and ibm2216PCIAdapOperStatus for each installed adapter card, immediately spotting a card reporting a down or failed operational status. ibm2216GraphicTable/ibm2216GraphicEntry maps ibm2216GraphicSlotNum and ibm2216GraphicPortNum to ibm2216GraphicifIndex, letting the admin correlate a specific physical port with its IF-MIB interface counters to diagnose whether a reported link problem stems from the port itself or the adapter card as a whole.

What Can Be Monitored

PCI adapter operational status
adapter type per slot
physical port to interface index mapping

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
ibm	1.3.6.1.4.1.2
ibmProd	1.3.6.1.4.1.2.6
ibm2216	1.3.6.1.4.1.2.6.131
ibm2216admin	1.3.6.1.4.1.2.6.131.1
ibm2216adminproducts	1.3.6.1.4.1.2.6.131.1.1
ibm2216mod400	1.3.6.1.4.1.2.6.131.1.1.1
ibm2216adminOID	1.3.6.1.4.1.2.6.131.1.2
ibm2216EnetChipSet	1.3.6.1.4.1.2.6.131.1.2.1
enetChipSetToshiba	1.3.6.1.4.1.2.6.131.1.2.1.1
enetChipSetAMD	1.3.6.1.4.1.2.6.131.1.2.1.2
ibm2216adminDebug	1.3.6.1.4.1.2.6.131.1.3
ibm2216system	1.3.6.1.4.1.2.6.131.2
ibm2216systemInfo	1.3.6.1.4.1.2.6.131.2.1
ibm2216cfgInfo	1.3.6.1.4.1.2.6.131.2.2
ibm2216hardware	1.3.6.1.4.1.2.6.131.3
ibm2216hardwareGeneral	1.3.6.1.4.1.2.6.131.3.1
ibm2216PCIAdapTable	1.3.6.1.4.1.2.6.131.3.1.1		not-accessible	A table of information about PCI adapters in this box.
ibm2216PCIAdapEntry	1.3.6.1.4.1.2.6.131.3.1.1.1		not-accessible	An entry containing objects to describe the adapter in a given slot.
INT ibm2216PCIAdapSlotNum	1.3.6.1.4.1.2.6.131.3.1.1.1.1	INTEGER	read-only	The number identifying a slot location where an adapter can be inserted.
INT ibm2216PCIAdapType	1.3.6.1.4.1.2.6.131.3.1.1.1.2	INTEGER	read-only	The type of adapter that is inserted into this slot. If no adapter is present, the variable will take the value not-present(2).
INT ibm2216PCIAdapOperStatus	1.3.6.1.4.1.2.6.131.3.1.1.1.3	INTEGER	read-only	The operational status of this PCI adapter. unknown (1) : If there was problem determining the operational status of the adapter. not-configured (2) : If the adapter inserted in the slot is recognized but no router configuration exists. not-present (3) : If no adapter is currently inserted. does-not-apply (4) : If this adapter does not contain an operational state. enable-pending (5) : If commands have been issued to enable the adapter but have not been completed. enabled (6) : If commands have been successfully issued to enable the adapter. disable-pending (7) : If commands have been issued to disable the adapter but have not been completed. disabled (8) : If commands have been successfully issued to disable the adapter. not-initialized (9) : If the adapter has not completed its initialization. unknown-device (10) : If the adapter inserted in the slot can not be recognized. hardware-error (11) : If the adapter can not be used nor made ready to be used. not-powered (12) : If the adapter has had a problem obtaining power from its slot. diagnostics (13) : If the adapter is currently undergoing diagnostics. wrs-available (14) : If the adapter is currently configured and available for WAN restoral. mis-configured (15) : If the adapter is inserted in the slot but the router configuration is of a different type.
ibm2216GraphicTable	1.3.6.1.4.1.2.6.131.3.1.2		not-accessible	A table of information mapping a slot and port to an interface table ifIndex. An entry exists in this table only if the ifConnectorPresent object is true
ibm2216GraphicEntry	1.3.6.1.4.1.2.6.131.3.1.2.1		not-accessible	An entry mapping slot and port to an interface table ifIndex.
INT ibm2216GraphicSlotNum	1.3.6.1.4.1.2.6.131.3.1.2.1.1	INTEGER	read-only	The number identifying a slot location where an adapter can be inserted.
INT ibm2216GraphicPortNum	1.3.6.1.4.1.2.6.131.3.1.2.1.2	INTEGER	read-only	The number identifying a port on a given adapter. A port implies a physical connector is associated with it.
INT ibm2216GraphicifIndex	1.3.6.1.4.1.2.6.131.3.1.2.1.3	INTEGER	read-only	The ifIndex of the interface table entry associated with this port on an adapter. By definition, the ifEntry has ifConnectorPresent = true.
ibm2216hardware400Specific	1.3.6.1.4.1.2.6.131.3.2
ibm2216routing	1.3.6.1.4.1.2.6.131.4
ibm2216switching	1.3.6.1.4.1.2.6.131.5

RFC description

Provides enterprise management objects for IBM 2216 multi-service routers including system, hardware, and switching components.

Start monitoring IBM 2216 Nways Multiaccess Connector with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IBM2216-MIB

What Is IBM2216-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description