IBM-BCM-MIB

All MIBs › IBM-BCM-MIB

Category: Vendor: IBM

Description: IBM MIB for Blade Center Management providing chassis-level monitoring and control for IBM BladeCenter servers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IBM-BCM-MIB?

IBM-BCM-MIB is an IBM-proprietary SNMP module for the Broadcast Manager (BCM) function within IBM's ATM LAN Emulation networking stack, extending the standard busConfTable used by the ATM LANE Broadcast-and-Unknown-Server (BUS) component. It exposes configuration objects for broadcast-server behavior (such as route-cache enablement) and a static-targets table mapping configured targets to their ATM and MAC addresses and protocol type, with row-creation/status control. Operators use it to monitor and manage the software configuration of the LAN Emulation broadcast/unknown-frame-forwarding function - confirming static target entries (ATM address, MAC address, protocol, row status) are correctly provisioned and that route caching is enabled as expected, which affects how unresolved/broadcast traffic is handled on the emulated LAN. It explicitly depends on and extends the standard ATM LANE busConfTable, so it cannot be understood or deployed without that base MIB. It is typically deployed on IBM ATM networking equipment (e.g., IBM 8285/2216-class ATM switches or routers) participating in classical LAN Emulation environments, an older network-virtualization technology largely superseded in modern deployments. Engineers can download the IBM-BCM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in IBM-BCM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

IBM ATM LAN Emulation switch/router (e.g., IBM 8285/2216-class equipment)

Monitoring Examples

An operator would check bcmRouteCacheEnabled in bcmConfTable/bcmConfEntry to confirm broadcast route caching is turned on for a given BUS instance, and would inspect bcmStaticTargetsTable entries (bcmStaticTargetsAtmAddress, bcmStaticTargetsMacAddress, bcmStaticTargetsProtocol, bcmStaticTargetsRowStatus) to verify a specific static target mapping is correctly provisioned and active rather than left in a not-ready row state.

What Can Be Monitored

route-cache enablement
static target ATM address mapping
static target MAC address mapping
static target protocol type
static target row status

Imported Objects

From LAN-EMULATION-BUS-MIB

busConfEntry	OBJECT-TYPE
busConfIndex	OBJECT-TYPE

From LAN-EMULATION-CLIENT-MIB

AtmLaneAddress

From NWAYSMSS-MIB

mssServerLanE

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From SNMPv2-SMI

Counter32
Integer32

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
C32 bcmBroadcastFramesDirectedAre	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.12	Counter32	read-only	Total number of frames, for all protocols, transmitted by BCM left as ARE.
C32 bcmBroadcastFramesDirectedNoRif	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.11	Counter32	read-only	Total number of frames, for all protocols, transmitted by BCM with no RI Field.
C32 bcmBroadcastFramesDirectedSrf	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.14	Counter32	read-only	Frames sent on one VCC, changed to SRF.
C32 bcmBroadcastFramesDirectedSte	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.13	Counter32	read-only	Total number of frames, for all protocols, transmitted by BCM that were converted from ARE or STE to SRF by Source Route Management, or left as SRF multicast frame (a rare frame type).
bcmCConfGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.1
bcmCIpConfigGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.3
bcmCIpStatGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.7
bcmCIpxConfigGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.4
bcmCIpxStatGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.8
bcmCNbConfigGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.5
bcmCNbStatGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.9
bcmConfEntry	1.3.6.1.4.1.2.6.118.1.2.1.3.1.1.1		not-accessible	Each entry in this table represents an extension of a corresponding enty in the busConfTable.
bcmConfGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.1
bcmConfTable	1.3.6.1.4.1.2.6.118.1.2.1.3.1.1		not-accessible	This table contains configuration values for the broadcast management functions of a BUS. It is an extension to the busConfTable.
bcmCStatGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.6
bcmCStaticTargetsConfigGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.2
C32 bcmFramesDiscarded	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.5	Counter32	read-only	Total number of frames discarded (filtered) by BCM for all protocols.
C32 bcmFramesReceived	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.1	Counter32	read-only	Total number of frames received by BCM for all protocols.
C32 bcmFramesReturned	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.3	Counter32	read-only	Total number of frames, for all protocols, not managed by BCM and returned to BUS for transmission.
C32 bcmFramesTransmitted	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.7	Counter32	read-only	Total number of frames transmitted by BCM for all protocols.
C32 bcmIpBroadcastFramesDirectedAre	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.12	Counter32	read-only	Number of (IP) frames transmitted by BCM left as ARE.
C32 bcmIpBroadcastFramesDirectedNoRif	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.11	Counter32	read-only	Number of (IP) frames transmitted by BCM with no RI Field.
C32 bcmIpBroadcastFramesDirectedSrf	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.14	Counter32	read-only	Number of (IP) frames transmitted by BCM that were converted from ARE or STE to SRF by Source Route Management, or left as SRF multicast frame (a rare frame type).
C32 bcmIpBroadcastFramesDirectedSte	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.13	Counter32	read-only	Number of (IP) frames transmitted by BCM left as STE.
INT bcmIpConfAdminStatus	1.3.6.1.4.1.2.6.118.1.2.1.3.1.4.1.2	INTEGER	read-write	The administrative state of the BCM/IP on this entry.
BCM bcmIpConfCacheAge	1.3.6.1.4.1.2.6.118.1.2.1.3.1.4.1.3	BcmCacheAge	read-write	The maximum number of minutes an IP Address entry is kept without re-verification of its location.
bcmIpConfEntry	1.3.6.1.4.1.2.6.118.1.2.1.3.1.4.1		not-accessible	Each entry in this table represents the configuration for the IP protocol of a single BCM.
INT bcmIpConfOperStatus	1.3.6.1.4.1.2.6.118.1.2.1.3.1.4.1.1	INTEGER	read-only	The operational state of BCM/IP on this entry. Other defines the transition states between up and down.
bcmIpConfTable	1.3.6.1.4.1.2.6.118.1.2.1.3.1.4		not-accessible	This table contains configuration parameters for the IP protocol for the BCMs at the agent. This table augments the bcmConfTable.
C32 bcmIpFramesDiscarded	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.5	Counter32	read-only	Number of (IP) frames discarded (filtered) by BCM.
C32 bcmIpFramesReceived	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.1	Counter32	read-only	Number of (IP) frames received by BCM.
C32 bcmIpFramesReturned	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.3	Counter32	read-only	Number of (IP) frames not managed by BCM and returned to BUS for transmission.
C32 bcmIpFramesTransmitted	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.7	Counter32	read-only	Number of (IP) frames transmitted by BCM.
C32 bcmIpOctetsDiscarded	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.6	Counter32	read-only	Number of (IP) octets discarded (filtered) by BCM.
C32 bcmIpOctetsReceived	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.2	Counter32	read-only	Number of (IP) octets received by BCM.
C32 bcmIpOctetsReturned	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.4	Counter32	read-only	Number of (IP) octets not managed by BCM and returned to BUS for transmission.
C32 bcmIpOctetsTransmitted	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.8	Counter32	read-only	Number of (IP) octets transmitted by BCM.
bcmIpStatEntry	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1		not-accessible	Each entry in this table contains the counters for the IP operation of a BCM. The table augments the bcmStatTable.
bcmIpStatTable	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2		not-accessible	Each entry in this table contains the counters for the IP operation of a BCM. The table augments the bcmStatTable.
C32 bcmIpTransmitErrorFrames	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.9	Counter32	read-only	Number of (IP) frames that the BCM could not sent due to an error.
C32 bcmIpTransmitErrorOctets	1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.10	Counter32	read-only	Number of (IP) octets that the BCM could not sent due to an error.
C32 bcmIpxBroadcastFramesDirectedAre	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.12	Counter32	read-only	Number of (IPX) frames transmitted by BCM left as ARE.
C32 bcmIpxBroadcastFramesDirectedNoRif	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.11	Counter32	read-only	Frame sent on one VCC, no RIF in them.
C32 bcmIpxBroadcastFramesDirectedSrf	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.14	Counter32	read-only	Number of (IPX) frames transmitted by BCM that were converted from ARE or STE to SRF by Source Route Management, or left as SRF multicast frame (a rare frame type).
C32 bcmIpxBroadcastFramesDirectedSte	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.13	Counter32	read-only	Number of (IPX) frames transmitted by BCM left as STE.
INT bcmIpxConfAdminStatus	1.3.6.1.4.1.2.6.118.1.2.1.3.1.5.1.2	INTEGER	read-write	The administrative state of the BCM/IPX on this entry.
BCM bcmIpxConfCacheAge	1.3.6.1.4.1.2.6.118.1.2.1.3.1.5.1.3	BcmCacheAge	read-write	The maximum number of minutes an IPX Address entry is kept without re-verification of its location.
bcmIpxConfEntry	1.3.6.1.4.1.2.6.118.1.2.1.3.1.5.1		not-accessible	Each entry in this table represents the configuration for the IPX protocol of a single BCM.
INT bcmIpxConfOperStatus	1.3.6.1.4.1.2.6.118.1.2.1.3.1.5.1.1	INTEGER	read-only	The operational state of BCM/IPX on this entry. Other defines the transition states between up and down.
bcmIpxConfTable	1.3.6.1.4.1.2.6.118.1.2.1.3.1.5		not-accessible	This table contains configuration parameters for the IPX protocol for the BCMs at the agent. This table augments the bcmConfTable.
C32 bcmIpxFramesDiscarded	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.5	Counter32	read-only	Number of (IPX) frames discarded (filtered) by BCM.
C32 bcmIpxFramesReceived	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.1	Counter32	read-only	Number of (IPX) frames received by BCM.
C32 bcmIpxFramesReturned	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.3	Counter32	read-only	Number of (IPX) frames not managed by BCM and returned to BUS for transmission.
C32 bcmIpxFramesTransmitted	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.7	Counter32	read-only	Number of (IPX) frames transmitted by BCM.
C32 bcmIpxOctetsDiscarded	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.6	Counter32	read-only	Number of (IPX) octets discarded (filtered) by BCM.
C32 bcmIpxOctetsReceived	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.2	Counter32	read-only	Number of (IPX) octets received by BCM.
C32 bcmIpxOctetsReturned	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.4	Counter32	read-only	Number of (IPX) octets not managed by BCM and returned to BUS for transmission.
C32 bcmIpxOctetsTransmitted	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.8	Counter32	read-only	Number of (IPX) octets transmitted by BCM.
bcmIpxStatEntry	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1		not-accessible	Each entry in this table contains the counters for the IPX operation of a BCM. The table augments the bcmStatTable.
bcmIpxStatTable	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3		not-accessible	Each entry in this table contains the counters for the IPX operation of a BCM. The table augments the bcmStatTable.
C32 bcmIpxTransmitErrorFrames	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.9	Counter32	read-only	Number of (IPX) frames that the BCM could not sent due to an error.
C32 bcmIpxTransmitErrorOctets	1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.10	Counter32	read-only	Number of (IPX) octets that the BCM could not sent due to an error.
bcmMIBCompliance	1.3.6.1.4.1.2.6.118.1.2.1.3.3.2.1
bcmMIBCompliances	1.3.6.1.4.1.2.6.118.1.2.1.3.3.2
bcmMIBConformance	1.3.6.1.4.1.2.6.118.1.2.1.3.3
bcmMIBGroups	1.3.6.1.4.1.2.6.118.1.2.1.3.3.1
C32 bcmNbBroadcastFramesDirectedAre	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.12	Counter32	read-only	Number of (NetBIOS) frames transmitted by BCM left as ARE.
C32 bcmNbBroadcastFramesDirectedNoRif	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.11	Counter32	read-only	Number of (NetBIOS) frames transmitted by BCM with no RI Field.
C32 bcmNbBroadcastFramesDirectedSrf	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.14	Counter32	read-only	Number of (NetBIOS) frames transmitted by BCM that were converted from ARE or STE to SRF by Source Route Management, or left as SRF ulticast frame (a rare frame type).
C32 bcmNbBroadcastFramesDirectedSte	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.13	Counter32	read-only	Number of (NetBIOS) frames transmitted by BCM left as STE.
INT bcmNbConfAdminStatus	1.3.6.1.4.1.2.6.118.1.2.1.3.1.6.1.2	INTEGER	read-write	The administrative state of the BCM/NetBIOS on this entry.
BCM bcmNbConfCacheAge	1.3.6.1.4.1.2.6.118.1.2.1.3.1.6.1.3	BcmCacheAge	read-write	The maximum number of minutes an NetBIOS Address entry is kept without re-verification of its location.
bcmNbConfEntry	1.3.6.1.4.1.2.6.118.1.2.1.3.1.6.1		not-accessible	Each entry in this table represents the configuration for the NetBIOS protocol of a single BCM.
INT bcmNbConfOperStatus	1.3.6.1.4.1.2.6.118.1.2.1.3.1.6.1.1	INTEGER	read-only	The operational state of BCM/NetBIOS on this entry. Other defines the transition states between up and down.
bcmNbConfTable	1.3.6.1.4.1.2.6.118.1.2.1.3.1.6		not-accessible	This table contains configuration parameters for the NetBIOS protocol for the BCMs at the agent. This table augments the bcmConfTable.
C32 bcmNbFramesDiscarded	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.5	Counter32	read-only	Number of (NetBIOS) frames discarded (filtered) by BCM.
C32 bcmNbFramesReceived	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.1	Counter32	read-only	Number of (NetBIOS) frames received by BCM.
C32 bcmNbFramesReturned	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.3	Counter32	read-only	Number of (NetBIOS) frames not managed by BCM and returned to BUS for transmission.
C32 bcmNbFramesTransmitted	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.7	Counter32	read-only	Number of (NetBIOS) frames transmitted by BCM.
C32 bcmNbOctetsDiscarded	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.6	Counter32	read-only	Number of (NetBIOS) octets discarded (filtered) by BCM.
C32 bcmNbOctetsReceived	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.2	Counter32	read-only	Number of (NetBIOS) octets received by BCM.
C32 bcmNbOctetsReturned	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.4	Counter32	read-only	Number of (NetBIOS) octets not managed by BCM and returned to BUS for transmission.
C32 bcmNbOctetsTransmitted	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.8	Counter32	read-only	Number of (NetBIOS) octets transmitted by BCM.
bcmNbStatEntry	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1		not-accessible	Each entry in this table contains the counters for the NetBIOS operation of a BCM. The table augments the bcmStatTable.
bcmNbStatTable	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4		not-accessible	Each entry in this table contains the counters for the NetBIOS operation of a BCM. The table augments the bcmStatTable.
C32 bcmNbTransmitErrorFrames	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.9	Counter32	read-only	Number of (NetBIOS) frames that the BCM could not sent due to an error.
C32 bcmNbTransmitErrorOctets	1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.10	Counter32	read-only	Number of (NetBIOS) octets that the BCM could not sent due to an error.
C32 bcmOctetsDiscarded	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.6	Counter32	read-only	Total number of octets discarded (filtered) by BCM for all protocols.
C32 bcmOctetsReceived	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.2	Counter32	read-only	Total number of octets received by BCM for all protocols.
C32 bcmOctetsReturned	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.4	Counter32	read-only	Total number of octets, for all protocols, not managed by BCM and returned to BUS for transmission.
C32 bcmOctetsTransmitted	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.8	Counter32	read-only	Total number of octets transmitted by BCM for all protocols.
T/F bcmRouteCacheEnabled	1.3.6.1.4.1.2.6.118.1.2.1.3.1.1.1.1	TruthValue	read-write	When 'true', the BCM will cache routes. When 'false', it will not.
bcmStatEntry	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1		not-accessible	Each entry in this table contains a BCM and its counters. These counters accumulate totals for all protocols.
bcmStatGroup	1.3.6.1.4.1.2.6.118.1.2.1.3.2
ADR bcmStaticTargetsAtmAddress	1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1.2	AtmLaneAddress	read-write	The ATM address of the static broadcast target.
bcmStaticTargetsEntry	1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1		not-accessible	Each entry in this table defines a broadcast target address for a BCM.
I32 bcmStaticTargetsIndex	1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1.1	Integer32	read-write	A value which uniquely identifies a conceptual row in the bcmStaticTargetsTable.
MAC bcmStaticTargetsMacAddress	1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1.3	MacAddress	read-write	The MAC address of the static broadcast target. This object is optional.
I32 bcmStaticTargetsNextId	1.3.6.1.4.1.2.6.118.1.2.1.3.1.2	Integer32	read-only	The next available index in the bcmStaticTargetsTable. The value of this object can be used as the index by the network manager to create an entry in the table. Note: since the bcmStaticTargetsTable is statically defined, by the MSS agent this object has no meaning. This object always has a value of 1. The agent statically defines three rows in this table and sets rowStatus based on initial configuration.
INT bcmStaticTargetsProtocol	1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1.4	INTEGER	read-write	The protocol designation for static broadcast target. Indicates for which protocol broadcast frames are forwarded. Currently, only IPX is supported (i.e., configured static entries only apply to IPX).
ROW bcmStaticTargetsRowStatus	1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1.5	RowStatus	read-write	This object is used to create or activate and inactivate entries in the bcmStaticTargetsTable. Note: in order to set RowStatus active bcmStaticTargetsProtocol and bcmStaticTargetsAtmAddress must be set to in the same SET bindings. If the optional object bcmStaticTargetsMacAddress is desired it must also be SET in the same bindings. Once the RowStatus is set to active, objects maybe individually set. Only values of active(1) and inActive(2) are supported for this table.
bcmStaticTargetsTable	1.3.6.1.4.1.2.6.118.1.2.1.3.1.3		not-accessible	This table contains static broadcast target addresses for all the BCMs at this agent. Each BCM may have multiple entries. Object bcmStaticTargetsRowStatus is required during row creation and deletion.
bcmStatTable	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1		not-accessible	This table contains all the counters maintained by the BCMs within the scope of an agent. This table augments the bcmConfTable.
C32 bcmTransmitErrorFrames	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.9	Counter32	read-only	Total number of frames, for all protocols, that the BCM could not sent due to an error.
C32 bcmTransmitErrorOctets	1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.10	Counter32	read-only	Total number of octets, for all protocols, that the BCM could not sent due to an error.
ibmBcmMIB	1.3.6.1.4.1.2.6.118.1.2.1.3

RFC description

IBM LAN Emulation Broadcast Manager (BCM) MIB for managing ATM broadcast and multicast addresses.

Start monitoring IBM ATM LAN Emulation switch/router (e.g. 8285/2216-class, Broadcast Manager) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IBM-BCM-MIB

What Is IBM-BCM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description