All MIBs › HPN-ICF-DOT11-WIDS-MIB
Last Updated: 2010-05-31
Category: Domain: Security, Technology: Wireless, Vendor: H3C/HH3C, Vendor: HP/HPE, Wireless and WLAN
Description: HP Networking ICF SNMP MIB for 802.11 Wireless Intrusion Detection System (WIDS) rogue AP detection on HP WLAN devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HPN-ICF-DOT11-WIDS-MIB?
HPN-ICF-DOT11-WIDS-MIB is an HP Networking (H3C-derived ICF platform) proprietary MIB (built on HPN-ICF-DOT11-REF-MIB) configuring WIDS (Wireless Intrusion Detection Sensor), which detects rogue APs, rogue stations, and wireless attacks. Its objects cover WIDS scan mode/channel list, containment-measure mode, device aging time, dynamic-blacklist enable/lifetime, flood/spoof/weak-IV attack-detection enables, reset actions for rogue history/statistics/block-list categories, flood interval, blacklist threshold, SSID/BSSID filter on/off flags, and a permitted-vendor table. As a configuration/security MIB it lets an administrator confirm rogue-AP detection settings and clear detection history on an HP Networking wireless controller. It is deployed on HP Networking (H3C-derived) wireless LAN controllers (WIDS). Engineers can download the HPN-ICF-DOT11-WIDS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-DOT11-WIDS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- HP Networking (H3C-derived) wireless LAN controllers (WIDS)
Monitoring Examples
An administrator checks hpnicfDot11FloodAtkDctEnable and hpnicfDot11WidsBlackListThreshold to confirm wireless intrusion-detection settings on an HP Networking wireless controller.
What Can Be Monitored
- rogue-AP/attack detection configuration and detection history
This MIB depends on
Related MIBs
Imported Objects
| HpnicfDot11ChannelScopeType | |
| HpnicfDot11ObjectIDType | |
| HpnicfDot11RadioScopeType | |
| HpnicfDot11RadioType | |
| HpnicfDot11SSIDStringType | |
| hpnicfDot11 | MODULE-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hpnicfDot11WIDS | 1.3.6.1.4.1.11.2.14.11.15.2.75.5 | This MIB provides information about WIDS feature. GLOSSARY Wireless Intrusion Detection Sensor (WIDS) WIDS is designed to be employed in an area that is serviced by an existing wireless network. It aids in the early detection of malicious outsider attacks and intrusions via wireless networks. Rogue AP A rogue access point is any Wi-Fi access point connected to the network without authorization. As it is not authorized, if there is any weakness in the AP, the hacker will have chance to compromise the network. Rogue Station It is similiar to Rogue AP, while it is a station. Monitor AP An AP will scan or listen to the air, and try to detect wireless attack in the network. Some AP products will work only in monitor role, while some AP products could switch between normal AP role (only provide wireless access service)and monitor AP role. Ad Hoc Mode Station could work under Ad hoc mode, then they could directly do peer-to-peer communication without other device support. | ||
| hpnicfDot11WIDSConfigGroup | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1 | |||
| hpnicfDot11WIDSGlobalConfigGroup | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1 | |||
| INT hpnicfDot11WIDSScanMode | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.1 | INTEGER | read-write | Represents the scope of channels to be scanned. The following value are supported all(1) - Do scan on all the channels. auto(2) - Do scan for the channels that automatically selected by WIDS. |
| OCT hpnicfDot11WIDSScanChannelList | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.2 | OCTET STRING | read-write | Represents the channel scope to be scanned when hpnicfDot11WIDSScanMode is configurated as channelSpec mode. Each channel value will be separated by comma character. |
| BIT hpnicfDot11CntMsrMode | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.3 | Bits | read-write | Represents the countermeasures mode. |
| I32 hpnicfDot11DevAgingTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.4 | Integer32 | read-write | Represents the age time for entries in the detected device table. If an entry is not detected within the interval, it is deleted from the detected device table. If the deleted entry is that of a rogue, it is added into the rogue history table. |
| T/F hpnicfDot11DynBlkListEnable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.5 | TruthValue | read-write | Represents whether the dynamic blacklist feature is enabled or not. 'true' : Enable the dynamic blacklist feature to filter out unwanted clients, which will not get associated. 'false' : Disable the dynamic blacklist feature. |
| I32 hpnicfDot11DynBlkListLifeTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.6 | Integer32 | read-write | Represents the lifetime for dynamic blacklist entries. If a dynamic blacklist entry is not detected within the lifetime, the entry will be removed from the dynamic blacklist. The lifetime becomes active only if dynamic blacklist feature is enabled. |
| T/F hpnicfDot11FloodAtkDctEnable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.7 | TruthValue | read-write | Represents whether detection of flood attack is enabled or not. 'true' : Enable the detection of flood attack. 'false' : Disable the detection of flood attack. |
| T/F hpnicfDot11SpoofAtkDctEnable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.8 | TruthValue | read-write | Represents whether detection of Spoof attack is enabled or not. 'true' : Enable the detection of Spoof attack. 'false' : Disable the detection of Spoof attack. |
| T/F hpnicfDot11WeakIVAtkDctEnable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.9 | TruthValue | read-write | Represents whether detection of weak-iv attack is enabled or not. 'true' : Enable the detection of weak-iv attack. 'false' : Disable the detection of weak-iv attack. |
| T/F hpnicfDot11ResetWIDSRogueHistory | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.10 | TruthValue | read-write | This object is used to clear all entries from the rogue history table. It will return false for get operation. |
| T/F hpnicfDot11ResetWIDSHistroy | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.11 | TruthValue | read-write | This object is used to clear the history information of attacks detected in the WLAN system. It will return false for get operation. |
| T/F hpnicfDot11ResetWIDSStatistics | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.12 | TruthValue | read-write | This object is used to clear the statistics of attacks detected in the WLAN system. It will return false for get operation. |
| T/F hpnicfDot11ResetAllDynBlkList | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.13 | TruthValue | read-write | This object is used to remove all entries from the dynamic blacklist. It will return false for get operation. |
| T/F hpnicfDot11ResetAllStcBlkList | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.14 | TruthValue | read-write | This object is used to remove all entries from the static blacklist. It will return false for get operation. |
| T/F hpnicfDot11ResetAllWhtBlkList | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.15 | TruthValue | read-write | This object is used to remove all entries from the static whitelist. It will return false for get operation. |
| T/F hpnicfDot11ResetAllDctRogueAP | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.16 | TruthValue | read-write | This object is used to clear the information of all detected rogue APs. It will return false for get operation. |
| T/F hpnicfDot11ResetAllDctRogueSta | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.17 | TruthValue | read-write | This object is used to clear the information of all detected rogue clients. It will return false for get operation. |
| T/F hpnicfDot11ResetAllDctAdhoc | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.18 | TruthValue | read-write | This object is used to clear the information of all detected ad hoc devices. It will return false for get operation. |
| T/F hpnicfDot11ResetAllDctDevice | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.19 | TruthValue | read-write | This object is used to clear the information of all detected devices. It will return false for get operation. |
| T/F hpnicfDot11ResetAllDctSSID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.20 | TruthValue | read-write | This object is used to clear the information of all detected SSIDs. It will return false for get operation. |
| U32 hpnicfDot11WidsFloodInterval | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.21 | Unsigned32 | read-write | The interval of WIDS flood detection. |
| U32 hpnicfDot11WidsBlackListThreshold | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.22 | Unsigned32 | read-write | When flood attack exceeds the value of this node, the MAC address will be added into black list. |
| INT hpnicfDot11SSIDFilterOnOff | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.23 | INTEGER | read-write | Represents whether the SSID permit feature is enabled or not. |
| INT hpnicfDot11BSSIDFilterOnOff | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.24 | INTEGER | read-write | Represents whether the BSSID permit feature is enabled or not. |
| hpnicfDot11WIDSPermitVendorTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.2 | not-accessible | The table provides the permitted vendor list, and each vendor will be identified by OUI. The legal device should be made by the permitted vendors. | |
| hpnicfDot11WIDSPermitVendorEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.2.1 | not-accessible | Each entry provides the information of permitted vendor. | |
| OCT hpnicfDot11VendorOUI | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.2.1.1 | OCTET STRING | not-accessible | Represents the vendor OUI information of the wireless device. |
| ROW hpnicfDot11PermitVendorRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.2.1.2 | RowStatus | read-create | The status of this table entry. |
| OCT hpnicfDot11VendorName | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.2.1.3 | OCTET STRING | read-only | Represents the vendor name of the wireless device. |
| hpnicfDot11WIDSPermitSSIDTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.3 | not-accessible | The table represents the list of SSID could be permitted in the wireless network. | |
| hpnicfDot11WIDSPermitSSIDEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.3.1 | not-accessible | Each entry provides the information of permitted SSID. | |
| STR hpnicfDot11PermitSSID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.3.1.1 | HpnicfDot11SSIDStringType | not-accessible | Represents the permitted SSID in the wireless network. |
| ROW hpnicfDot11PermitSSIDRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.3.1.2 | RowStatus | read-create | The status of this table entry. |
| T/F hpnicfDot11PermitSSIDDetected | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.3.1.3 | TruthValue | read-only | Represents whether the permitted SSID is detected or not. |
| hpnicfDot11WIDSIgnoreListTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4 | not-accessible | The table provides the MAC address list of stations or APs, and WIDS always take them as legal stations or APs. | |
| hpnicfDot11WIDSIgnoreListEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4.1 | not-accessible | Each entry contains the MAC address of station or AP, and WIDS always take it as legal station or AP. | |
| MAC hpnicfDot11IgnoreMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4.1.1 | MacAddress | not-accessible | Represents the MAC address of station or AP, and WIDS always take it as legal station or AP. |
| ROW hpnicfDot11IgnoreListRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4.1.2 | RowStatus | read-create | The status of this table entry. |
| T/F hpnicfDot11IgnoreMACDetected | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4.1.3 | TruthValue | read-only | Represents whether the MAC address detected or not. |
| HPN hpnicfDot11IgnoreDevType | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4.1.4 | HpnicfDot11WIDSDevType | read-only | Represents the type of the MAC address detected. The value of this object always is unknown if the MAC address is not detected. |
| hpnicfDot11WIDSAttackListTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5 | not-accessible | The table provides the MAC address list of rogue APs or rogue stations, the WIDS will take countermeasure as per the MAC address list. | |
| hpnicfDot11WIDSAttackListEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5.1 | not-accessible | Each entry contains the MAC address of rogue AP or rogue station, and the countermeasure will be taken for it. | |
| MAC hpnicfDot11AttackDeviceMac | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5.1.1 | MacAddress | not-accessible | Represents the MAC address of rogue AP or rogue station, and the countermeasure will be taken for it. |
| ROW hpnicfDot11AttackListRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5.1.2 | RowStatus | read-create | The status of this table entry. |
| T/F hpnicfDot11AttackDevDetected | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5.1.3 | TruthValue | read-only | Represents whether the assigned MAC address in attack list is detected or not. |
| HPN hpnicfDot11AttackDevType | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5.1.4 | HpnicfDot11WIDSDevType | read-only | Represents the type of detected MAC address in attack list. If the MAC address is not detected, it will return unknown(5) for get operation. |
| hpnicfDot11StaticWhiteListTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.6 | not-accessible | The table provides the information of whitelist. | |
| hpnicfDot11StaticWhiteListEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.6.1 | not-accessible | Each entry contains the information of whitelist. | |
| MAC hpnicfDot11StaticWhiteListMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.6.1.1 | MacAddress | not-accessible | Represents the MAC addresses in whitelist. |
| ROW hpnicfDot11StaticWhiteListRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.6.1.2 | RowStatus | read-create | The status of this table entry. |
| hpnicfDot11StaticBlackListTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.7 | not-accessible | The table provides the information of static blacklist. | |
| hpnicfDot11StaticBlackListEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.7.1 | not-accessible | Each entry contains the information of static blacklist. | |
| MAC hpnicfDot11StaticBlackListMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.7.1.1 | MacAddress | not-accessible | Represents the MAC addresses in static blacklist. |
| ROW hpnicfDot11StaticBlackListRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.7.1.2 | RowStatus | read-create | The status of this table entry. |
| hpnicfDot11WIDSPermitBSSIDTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.8 | not-accessible | The table represents the list of BSSID could be permitted in the wireless network. | |
| hpnicfDot11WIDSPermitBSSIDEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.8.1 | not-accessible | Each entry provides the information of permitted BSSID. | |
| MAC hpnicfDot11PermitBSSID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.8.1.1 | MacAddress | not-accessible | Represents the permitted BSSID in the wireless network. |
| T/F hpnicfDot11PermitBSSIDDetected | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.8.1.2 | TruthValue | read-only | Represents whether the permitted BSSID is detected or not. |
| ROW hpnicfDot11PermitBSSIDRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.8.1.3 | RowStatus | read-create | Represents the row status of permit BSSID table. |
| hpnicfDot11WIDSDetectGroup | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2 | |||
| hpnicfDot11WIDSRogueAPTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1 | not-accessible | The table represents the list of possible BSS information for rogue APs detected by the WIDS. | |
| hpnicfDot11WIDSRogueAPEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1 | not-accessible | Each entry contains possible BSS information of each rogue AP detected by WIDS. | |
| MAC hpnicfDot11RogueAPBSSMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.1 | MacAddress | not-accessible | Represents the BSS MAC address of rogue AP. |
| OCT hpnicfDot11RogueAPVendorName | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.2 | OCTET STRING | read-only | Represents the vendor name of rogue AP. |
| I32 hpnicfDot11RogueAPMonitorNum | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.3 | Integer32 | read-only | Represents the number of monitor APs which detected the rogue AP. |
| TIK hpnicfDot11RogueAPFirstDetectTm | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.4 | TimeTicks | read-only | Represents the time that AP was detected as a rogue AP for the first time. |
| TIK hpnicfDot11RogueAPLastDetectTm | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.5 | TimeTicks | read-only | Represents the time that AP was detected as a rogue AP for the last time. |
| STR hpnicfDot11RogueAPSSID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.6 | HpnicfDot11SSIDStringType | read-only | Represents the SSID broadcasted by rogue AP. |
| I32 hpnicfDot11RogueAPMaxSigStrength | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.7 | Integer32 | read-only | Represents the maximal value of signal strength that WIDS received from the rogue AP. |
| HPN hpnicfDot11RogueAPChannel | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.8 | HpnicfDot11ChannelScopeType | read-only | Represents on which radio channel of the rogue AP the maximal signal strength was received. |
| I32 hpnicfDot11RogueAPBeaconInterval | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.9 | Integer32 | read-only | Represents the interval for Beacon management frame of rogue AP. |
| T/F hpnicfDot11RogueAPAttackedStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.10 | TruthValue | read-only | Represents whether the countermeasure have taken for the rogue AP. |
| T/F hpnicfDot11RogueAPToIgnore | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.11 | TruthValue | read-write | Represents whether the rogue AP will be taken as a rogue AP. If the value is true, NMS should not display the rogue AP as NMS display rogue AP list, and the MAC address will be automatically added into hpnicfDot11WIDSIgnoreListTable. If the value is false, NMS will take it as a rogue AP. |
| T/F hpnicfDot11RogueAPEncryptStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.12 | TruthValue | read-only | Represents whether the rogue AP encrypt the frame or not. |
| T/F hpnicfDot11RogueAPReset | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.13 | TruthValue | read-write | This object is used to clear information of assigned AP. The information of AP which detect assigned rogue AP will be cleared together. It will return false for get operation. |
| OCT hpnicfDot11RogueAPFirstDetectTmStr | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.14 | OCTET STRING | read-only | Represents the time that AP was detected as a rogue AP for the first time. |
| OCT hpnicfDot11RogueAPLastDetectTmStr | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.15 | OCTET STRING | read-only | Represents the time that AP was detected as a rogue AP for the last time. |
| hpnicfDot11WIDSRogueAPExtTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2 | not-accessible | As each rogue AP could be detected by multiple monitor APs, each monitor AP could have some kind of detailed information about a specific rogue AP. In the hpnicfDot11WIDSRogueAPTable table, the detailed information for a specific rogue AP will be summarized from information in the hpnicfDot11WIDSRogueAPExtTable table. For example, multiple monitor APs could receive RF signal of one rogue AP, and each monitor AP has its maximum signal strength by itself. The information will be kept as hpnicfDot11DetectMaxAPSigStrength in the hpnicfDot11WIDSRogueAPExtTable table. While only the maximum value among all the hpnicfDot11DetectMaxAPSigStrength for each monitor AP will be kept in the hpnicfDot11WIDSRogueAPTable as hpnicfDot11RogueAPMaxSigStrength. | |
| hpnicfDot11WIDSRogueAPExtEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1 | not-accessible | Each entry contains information of the rogue AP detected by each monitor AP. | |
| HPN hpnicfDot11WIDSAPID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.1 | HpnicfDot11ObjectIDType | not-accessible | To uniquely identify each AP, and relation-ship between hpnicfDot11WIDSAPID and AP device will be static. |
| I32 hpnicfDot11DetectCurAPSigStrength | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.2 | Integer32 | read-only | Represents the current value of signal strength that WIDS monitor AP received from the rogue AP. |
| HPN hpnicfDot11DetectAPByChannel | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.3 | HpnicfDot11ChannelScopeType | read-only | Represents on which radio channel that WIDS monitor AP detected the rogue AP. |
| HPN hpnicfDot11DetectAPByRadioID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.4 | HpnicfDot11RadioScopeType | read-only | Represents on which radio the monitor AP has detected the rogue AP. |
| T/F hpnicfDot11AttackAPStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.5 | TruthValue | read-only | Represents whether monitor AP have taken countermeasure on the rogue AP. |
| TIK hpnicfDot11DetectAPFirstTm | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.6 | TimeTicks | read-only | Represents the time that monitor AP detected the rogue AP for the first time. |
| TIK hpnicfDot11DetectAPLastTm | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.7 | TimeTicks | read-only | Represents the time that monitor AP detected the rogue AP for the last time. |
| hpnicfDot11WIDSRogueStaTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3 | not-accessible | The table represents the list of rogue stations detected by the WIDS. | |
| hpnicfDot11WIDSRogueStaEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1 | not-accessible | Each entry contains information of each rogue station. | |
| MAC hpnicfDot11RogueStaMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.1 | MacAddress | not-accessible | Represents the MAC address of rogue station. |
| OCT hpnicfDot11RogueStaVendorName | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.2 | OCTET STRING | read-only | Represents the vendor name of rogue station. |
| I32 hpnicfDot11RogueStaMonitorNum | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.3 | Integer32 | read-only | Represents the number of monitor APs which detected the rogue station. |
| TIK hpnicfDot11RogueStaFirstDetectTm | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.4 | TimeTicks | read-only | Represents the time that station was detected as a rogue station for the first time. |
| TIK hpnicfDot11RogueStaLastDetectTm | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.5 | TimeTicks | read-only | Represents the time that station was detected as a rogue station for the last time. |
| MAC hpnicfDot11RogueStaAccessBSSID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.6 | MacAddress | read-only | Represents BSS MAC address that rogue station try to access. |
| I32 hpnicfDot11RogueStaMaxSigStrength | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.7 | Integer32 | read-only | Represents the maximal value of signal strength that WIDS received from the rogue station. |
| HPN hpnicfDot11RogueStaChannel | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.8 | HpnicfDot11ChannelScopeType | read-only | Represents on which radio channel the maximal signal strength was received. |
| T/F hpnicfDot11RogueStaAttackedStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.9 | TruthValue | read-only | Represents whether the countermeasure have taken for the rogue station. |
| T/F hpnicfDot11RogueStaToIgnore | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.10 | TruthValue | read-write | Represents whether the rogue AP will be taken as a rogue station. If the value is true, NMS should not display the rogue station as NMS display rogue station list, and the MAC address will be automatically added into hpnicfDot11WIDSIgnoreListTable. If the value is false, NMS will take it as a rogue station. |
| T/F hpnicfDot11RogueStaAdHocStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.11 | TruthValue | read-only | Represents whether the rogue station work on the Ad Hoc mode or not. |
| T/F hpnicfDot11RogueStaReset | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.12 | TruthValue | read-write | This object is used to clear information of assigned station. The information of AP which detects assigned rogue station will be cleared together. It will return false for get operation. |
| OCT hpnicfDot11RogueStaFirstDetectTmStr | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.13 | OCTET STRING | read-only | Represents the time that station was detected as a rogue station for the first time. |
| OCT hpnicfDot11RogueStaLastDetectTmStr | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.14 | OCTET STRING | read-only | Represents the time that station was detected as a rogue station for the last time. |
| hpnicfDot11WIDSRogueStaExtTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4 | not-accessible | As each rogue station could be detected by multiple monitor APs, each monitor AP could have some kind of detailed information about a specific rogue station. In the hpnicfDot11WIDSRogueStaTable table, the detailed information for a specific rogue station will be summarized from information in the hpnicfDot11WIDSRogueStaExtTable table. For example, multiple monitor APs could receive RF signal of one rogue station, and each monitor AP has its maximum signal strength by itself. The information will be kept as hpnicfDot11DetectMaxStaSigStrength in the hpnicfDot11WIDSRogueStaExtTable table. While only the maximum value among all the hpnicfDot11DetectMaxStaSigStrength for each monitor AP will be kept in the hpnicfDot11WIDSRogueStaTable as hpnicfDot11RogueStaMaxSigStrength. | |
| hpnicfDot11WIDSRogueStaExtEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1 | not-accessible | Each entry contains information of rogue station detected by each monitor AP. | |
| I32 hpnicfDot11DetectCurStaSigStrength | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.1 | Integer32 | read-only | Represents the current value of signal strength that WIDS monitor AP received from the rogue station. |
| HPN hpnicfDot11DetectStaByChannel | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.2 | HpnicfDot11ChannelScopeType | read-only | Represents on which radio channel the maximal signal strength was received. |
| HPN hpnicfDot11DetectStaByRadioID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.3 | HpnicfDot11RadioScopeType | read-only | Represents which radio on the monitor AP has detected the rogue station. |
| T/F hpnicfDot11AttackStaStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.4 | TruthValue | read-only | Represents whether monitor AP have taken countermeasure for the rogue station. |
| TIK hpnicfDot11DetectStaFirstTm | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.5 | TimeTicks | read-only | Represents the time that monitor AP detected the rogue station for the first time. |
| TIK hpnicfDot11DetectStaLastTm | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.6 | TimeTicks | read-only | Represents the time that monitor AP detected the rogue station for the last time. |
| hpnicfDot11WIDSDetectedDevTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5 | not-accessible | This Table contains information of detected devices. | |
| hpnicfDot11WIDSDetectedDevEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1 | not-accessible | Each entry contains information of detected devices. | |
| MAC hpnicfDot11WIDSDevMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.1 | MacAddress | not-accessible | Represents MAC address of the device detected. |
| HPN hpnicfDot11WIDSDevType | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.2 | HpnicfDot11WIDSDevType | read-only | Represents type of the device detected. |
| HPN hpnicfDot11WIDSDevPermitType | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.3 | HpnicfDot11WIDSDevPermitType | read-only | Represents whether the device detected is a rogue device or not. |
| OCT hpnicfDot11WIDSDevVendor | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.4 | OCTET STRING | read-only | Represents Vendor of the detected device. |
| I32 hpnicfDot11WIDSDevMonitorNum | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.5 | Integer32 | read-only | Represents the number of active APs that detect the device. |
| OCT hpnicfDot11WIDSDevSSID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.6 | OCTET STRING | read-only | Represents the service set identifier for the ESS of the device. |
| MAC hpnicfDot11WIDSDevBSSID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.7 | MacAddress | read-only | Represents the basic service set identifier of the detected device. |
| HPN hpnicfDot11WIDSDevChannel | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.8 | HpnicfDot11ChannelScopeType | read-only | Represents the channel in which the device was last detected. |
| I32 hpnicfDot11WIDSDevMaxRSSI | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.9 | Integer32 | read-only | Represents the maximum detected RSSI of the device. |
| I32 hpnicfDot11WIDSDevBeaconIntvl | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.10 | Integer32 | read-only | Represents the beacon interval for the detected AP. |
| DAT hpnicfDot11WIDSDevFstDctTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.11 | DateAndTime | read-only | Represents the time at which the device was first detected. |
| DAT hpnicfDot11WIDSDevLstDctTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.12 | DateAndTime | read-only | Represents the time at which the rogue AP was detected last time. |
| T/F hpnicfDot11WIDSDevReset | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.13 | TruthValue | read-write | This object is used to clears the information of the device detected in the WLAN. It will return false for get operation. |
| I32 hpnicfDot11WIDSDevSnr | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.14 | Integer32 | read-only | Represents SNR of the device detected. |
| hpnicfDot11WIDSRptAPTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6 | not-accessible | This Table contains information of the AP which detected device in the WLAN. | |
| hpnicfDot11WIDSRptAPEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1 | not-accessible | Each entry contains information of the AP which detected device in the WLAN. | |
| MAC hpnicfDot11WIDSRptAPMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.1 | MacAddress | not-accessible | Represents the MAC address of the AP that detected the device. |
| OCT hpnicfDot11WIDSRptAPName | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.2 | OCTET STRING | read-only | Represents the name of the AP that detected the device. |
| HPN hpnicfDot11WIDSRptAPRadioID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.3 | HpnicfDot11RadioScopeType | read-only | Represents the radio index of the AP that detected the device. |
| I32 hpnicfDot11WIDSRptAPMaxRSSI | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.4 | Integer32 | read-only | Represents the maximum detected RSSI of the device. |
| DAT hpnicfDot11WIDSRptAPFstDctTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.5 | DateAndTime | read-only | Represents the time at which the rogue AP was detected first time. |
| DAT hpnicfDot11WIDSRptAPLstDctTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.6 | DateAndTime | read-only | Represents the time at which the rogue AP was detected last time. |
| hpnicfDot11DynBlackListTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7 | not-accessible | This table contains information of dynamic blacklist entries. | |
| hpnicfDot11DynBlackListEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1 | not-accessible | Each entry contains information of dynamic blacklist. | |
| MAC hpnicfDot11DynBlackListMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1.1 | MacAddress | not-accessible | Represents the MAC address of the device inserted into the dynamic blacklist. |
| U32 hpnicfDot11DynBlackListTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1.2 | Unsigned32 | read-only | Represents the time elapsed since the entry was last updated. |
| OCT hpnicfDot11DynBlackListReason | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1.3 | OCTET STRING | read-only | Represents the reason why the entry was added into the dynamic blacklist. |
| T/F hpnicfDot11DynBlackListReset | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1.4 | TruthValue | read-write | This object is used to remove designated entry from the dynamic blacklist. The value which read from this object always is false. |
| TIK hpnicfDot11DynBlackListTimeTicks | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1.5 | TimeTicks | read-only | Represents the time elapsed since the entry was last updated in units TimeTicks. |
| hpnicfDot11WIDSRogueHistoryTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8 | not-accessible | This table contains information of all expired rogue devices which have been deleted from the list of detected rogue devices because they could not be detected within the device aging duration. | |
| hpnicfDot11WIDSRogueHistoryEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1 | not-accessible | Each entry contains information of an expired rogue device which has been deleted from the list of detected rogue devices because they could not be detected within the device aging duration. | |
| I32 hpnicfDot11WIDSRogueHisIndex | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.1 | Integer32 | not-accessible | Represents index of this entry. |
| MAC hpnicfDot11WIDSRogueHisMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.2 | MacAddress | read-only | Represents the MAC address of the device. |
| OCT hpnicfDot11WIDSRogueHisVendor | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.3 | OCTET STRING | read-only | Represents the vendor for the device. |
| HPN hpnicfDot11WIDSRogueHisType | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.4 | HpnicfDot11WIDSDevType | read-only | Represents the type of the device. |
| HPN hpnicfDot11WIDSRogueHisChl | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.5 | HpnicfDot11ChannelScopeType | read-only | Represents the channel in which the device was last detected. |
| OCT hpnicfDot11WIDSRogueHisSSID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.6 | OCTET STRING | read-only | Represents the service set identifier for the ESS of the device. |
| DAT hpnicfDot11WIDSRogueHisLastDctTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.7 | DateAndTime | read-only | Represents the time at which the device was last detected. |
| hpnicfDot11WIDSAtkHistroyTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9 | not-accessible | This table contains information of the history of attacks detected in the WLAN system. | |
| hpnicfDot11WIDSAtkHistroyEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1 | not-accessible | Each entry contains information of the history of attacks detected in the WLAN system. | |
| I32 hpnicfDot11WIDSAtkHisIndex | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.1 | Integer32 | not-accessible | Represents index of this entry. |
| MAC hpnicfDot11WIDSAtkHisMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.2 | MacAddress | read-only | Represents the Mac address. In case of spoof attacks, this field provides the BSSID which was spoofed. In case of other attacks, this field provides the MAC address of the device which initiated the attack. |
| HPN hpnicfDot11WIDSAtkHisType | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.3 | HpnicfDot11WIDSAtkType | read-only | Represents the type of attack. |
| HPN hpnicfDot11WIDSAtkHisChl | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.4 | HpnicfDot11ChannelScopeType | read-only | Represents the channel in which the attack was detected. |
| I32 hpnicfDot11WIDSAtkHisRSSI | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.5 | Integer32 | read-only | Represents the average RSSI of the designated attack. |
| DAT hpnicfDot11WIDSAtkHisDctTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.6 | DateAndTime | read-only | Represents the time at which this attack was detected. |
| OCT hpnicfDot11WIDSAtkHisAPName | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.7 | OCTET STRING | read-only | Represents the name of the AP which detected this attack. |
| hpnicfDot11WIDSAtkStatis | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10 | |||
| DAT hpnicfDot11WIDSAtkStasStartTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.1 | DateAndTime | read-only | Represents current attack tracking time. It is started at the system startup and is refreshed each hour subsequently. |
| hpnicfDot11WIDSAtkStasTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.2 | not-accessible | This table contains information of the counts of attacks detected. | |
| hpnicfDot11WIDSAtkStasEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.2.1 | not-accessible | Each entry contains information of the counts of attacks detected. | |
| HPN hpnicfDot11WIDSAtkStasType | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.2.1.1 | HpnicfDot11WIDSAtkType | not-accessible | Represents the type of attack. |
| U32 hpnicfDot11WIDSAtkStasCurCnt | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.2.1.2 | Unsigned32 | read-only | Represents the count of attacks detected since the time specified by the current attack tracking time. The current attack tracking time is started at the system startup and is refreshed each hour subsequently. |
| U32 hpnicfDot11WIDSAtkStasTotalCnt | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.2.1.3 | Unsigned32 | read-only | Represents the total count of the attacks detected since the system startup. |
| hpnicfDot11BlackListTable | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11 | not-accessible | This table contains information of blacklist entries, including dynamic and static. | |
| hpnicfDot11BlackListEntry | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1 | not-accessible | Each entry contains information of blacklist. | |
| MAC hpnicfDot11BlackListMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1.1 | MacAddress | not-accessible | This object represents the MAC address of the device inserted into the table. |
| U32 hpnicfDot11BlackListTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1.2 | Unsigned32 | read-only | Represents the time elapsed since the entry was last updated. If it is static blacklist, the value is always 0. |
| OCT hpnicfDot11BlackListReason | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1.3 | OCTET STRING | read-only | Represents the reason why the entry was added into the blacklist. |
| ROW hpnicfDot11BlackListRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1.4 | RowStatus | read-create | This object represents the status of this table entry. |
| TIK hpnicfDot11BlackListTimeTicks | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1.5 | TimeTicks | read-only | Represents the time elapsed since the entry was last updated in timetick. If it is static blacklist, the value is always 0. |
| hpnicfDot11WIDSNotifyGroup | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3 | |||
| hpnicfDot11WIDSTraps | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1 | |||
| NTF hpnicfDot11WIDSDetectRogueTrap | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.1 | The notification represents that a rogue AP or a station was detected by WIDS. The NMS would refer to MIB table under hpnicfDot11WIDSDetectGroup group to get more detailed information. | ||
| NTF hpnicfDot11WIDSAdHocTrap | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.2 | The notification represents a rogue Ad hoc station was detected. | ||
| NTF hpnicfDot11WIDSUnauthorSSIDTrap | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.3 | The notification represents which unauthorized SSID are accessed in the network. The notification will be sent to NMS when an unauthorized SSID is detected on the network for the first time. | ||
| NTF hpnicfDot11WIDSDisappearRogueTrap | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.4 | The notification represents that a rogue device has aged out and moved to history table or the device type has been changed to friendly. The notification will be sent to NMS whenever a rogue disappears. | ||
| NTF hpnicfDot11WIDSDetectAttack | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.5 | This notification occurs when some type of attack is detected. | ||
| NTF hpnicfDot11WIDSDetectWBridge | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.6 | This notification occurs whenever a detected device is classified as rogue wireless-bridge. | ||
| NTF hpnicfDot11WIDSFloodTrap | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.7 | This notification occurs when flood attack is detected. | ||
| NTF hpnicfDot11WIDSSpoofTrap | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.8 | This notification occurs when spoof attack is detected. | ||
| NTF hpnicfDot11WIDSWeakIVTrap | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.9 | This notification occurs when weak IV attack is detected. | ||
| hpnicfDot11WIDSTrapVarObjects | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2 | |||
| MAC hpnicfDot11WIDSRogueMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.1 | MacAddress | accessible-for-notify | Represents which rogue AP or station. |
| INT hpnicfDot11WIDSRogueType | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.2 | INTEGER | accessible-for-notify | Represents the rogue type. The following value are supported rogueAp(1) - A rogue AP rogueStation(2) - A rogue Station |
| MAC hpnicfDot11WIDSMonitorMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.3 | MacAddress | accessible-for-notify | Represents which monitor detected the rogue AP or station. |
| MAC hpnicfDot11WIDSAdHocMAC | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.4 | MacAddress | accessible-for-notify | Represents the MAC address of Ad hoc station. |
| STR hpnicfDot11UnauthorSSIDName | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.5 | HpnicfDot11SSIDStringType | accessible-for-notify | Represents an unauthorized SSID. |
| HPN hpnicfDot11MonitorAPID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.6 | HpnicfDot11ObjectIDType | accessible-for-notify | Represents monitor AP's APID. |
| HPN hpnicfDot11MonitorApRadioID | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.7 | HpnicfDot11RadioScopeType | accessible-for-notify | Represents monitor AP's radio ID |
| MAC hpnicfDot11WIDSAtkMac | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.8 | MacAddress | accessible-for-notify | Represents mac address of attack source. |
| OCT hpnicfDot11WIDSAtkFrameType | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.9 | OCTET STRING | accessible-for-notify | Represents attack frame type. |
| HPN hpnicfDot11WIDSAtkChannel | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.10 | HpnicfDot11ChannelScopeType | accessible-for-notify | Represents attack channel. |
| OCT hpnicfDot11WIDSAtkTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.11 | OCTET STRING | accessible-for-notify | Represents when attacking happened. |
| MAC hpnicfDot11WIDSAtkDestMac | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.12 | MacAddress | accessible-for-notify | Represents mac address of attack destination. |
| TIK hpnicfDot11WIDSFirstTrapTime | 1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.13 | TimeTicks | accessible-for-notify | Represents the first trap time. |
RFC description
Detects and monitors rogue wireless access points, unauthorized devices, and Wi-Fi security threats.
Start monitoring HP Networking (H3C-derived) wireless LAN controller (Wireless Intrusion Detection Sensor) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.