All MIBs › HUAWEI-WLAN-CONFIGURATION-MIB › hw5gRadioWifiLight
hw5gRadioWifiLight
Module: HUAWEI-WLAN-CONFIGURATION-MIB
OID (symbolic): HUAWEI-WLAN-CONFIGURATION-MIB::hw5gRadioWifiLight
OID (numeric): 1.3.6.1.4.1.2011.6.139.11.1.17.1.48
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1 NOTE ? If Mesh is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the AP with the weakest signal among received signals from all neighboring APs.? If WDS is enabled on an AP, the the Wireless indicator blinking frequency reflects the signal strength of the connected WDS AP.? For a Leaf AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP.? For a Middle AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Root AP.? For a root AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP with the weakest signal.? If WDS or Mesh is not enabled on an AP, the Wireless indicator blinking frequency reflects the service traffic volume on the radio.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.139.11.1.17.1.48 snmpwalk -v2c -c public <target> HUAWEI-WLAN-CONFIGURATION-MIB::hw5gRadioWifiLight
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.139.11.1.17.1.48.1 snmpget -v2c -c public <target> HUAWEI-WLAN-CONFIGURATION-MIB::hw5gRadioWifiLight.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.139.11.1.17.1.48.1 i <value>
Start monitoring Huawei WLAN access controller/access point (global WLAN configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-WLAN-CONFIGURATION-MIB::hw5gRadioWifiLight OID value, configure state conditions and alerts, and monitor any Huawei WLAN access controller/access point (global WLAN configuration) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.6.139 | hwWlan | HUAWEI-WLAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.139.11 | hwWlanConfig | HUAWEI-WLAN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.2011.6.139.11.1 | hwWlanConfigObjects | HUAWEI-WLAN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.2011.6.139.11.1.17 | hw5gRadioProfileTable | HUAWEI-WLAN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.2011.6.139.11.1.17.1 | hw5gRadioProfileEntry | HUAWEI-WLAN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.2011.6.139.11.1.17.1.48 | hw5gRadioWifiLight | HUAWEI-WLAN-CONFIGURATION-MIB |