All MIBs › HUAWEI-RM-EXT-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2014-12-11
Category: Device Management, Hardware and Environment, Vendor: Huawei
Description: Huawei resource management extensions MIB for managing system resource allocation, process CPU usage, and memory partitioning.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-RM-EXT-MIB?
The module's own DESCRIPTION text indicates HUAWEI-RM-EXT-MIB is used to manage the static route table configuration, which differs from the short description's framing of it as a general resource-management (CPU/memory) MIB -- this summary follows the module's actual description text as the more authoritative source. It exposes configuration data for static route entries, such as destination prefix, next-hop, and route preference. Its monitoring value is software/network status: confirming a configured static route is present and active, which is important for detecting a route that failed to install or was misconfigured, causing traffic to be silently dropped (black-holed) for a given destination. It complements the standard IETF route-table MIBs (such as IP-FORWARD-MIB) by adding Huawei-specific static-route management extensions. It is deployed on Huawei routers where static routes are used for traffic engineering, backup paths, or simple topologies without dynamic routing. Network engineers evaluating or troubleshooting this functionality can download the HUAWEI-RM-EXT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-RM-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei routers
Monitoring Examples
No sample object names were provided for this module. Based on the module's actual description (static route table management), an administrator would poll the static route configuration table for a specific destination/next-hop pair to verify the route is present and active, and would notice a problem if an expected static route were missing or inactive, causing traffic toward that destination to be dropped.
What Can Be Monitored
- static route entries (destination/next-hop)
- route preference/metric
- route active/valid status
- static route table changes
This MIB depends on
Related MIBs
Imported Objects
From ENTITY-MIB
| entPhysicalIndex | OBJECT-TYPE |
| entPhysicalName | OBJECT-TYPE |
From HUAWEI-MIB
| hwDatacomm | OBJECT-IDENTITY |
From IPV6-TC
| Ipv6Address |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| U32 hwAcIndex | 1.3.6.1.4.1.2011.5.25.145.3.3.1.2 | Unsigned32 | not-accessible | The object indicates the AC index of a PWE3. |
| U32 hwCurIpv4PrefixNum | 1.3.6.1.4.1.2011.5.25.145.8.1 | Unsigned32 | accessible-for-notify | This object indicates the current number of IPv4 prefix. |
| U32 hwCurIpv6PrefixNum | 1.3.6.1.4.1.2011.5.25.145.9.1 | Unsigned32 | accessible-for-notify | This object indicates the current number of IPv6 prefix. |
| U32 hwCurMacNum | 1.3.6.1.4.1.2011.5.25.145.21.2 | Unsigned32 | accessible-for-notify | This object indicates the current number of MAC addresses of the EVPN instance. |
| NTF hwEvpnMacExceed | 1.3.6.1.4.1.2011.5.25.145.22.1 | This object indicates that the number of MAC addresses of the EVPN instance has exceeded the maximum value. | ||
| NTF hwEvpnMacExceedClear | 1.3.6.1.4.1.2011.5.25.145.22.2 | This object indicates that the number of MAC addresses of the EVPN instance has resumed from exceeding the maximum value. | ||
| hwEvpnMacLimitConformance | 1.3.6.1.4.1.2011.5.25.145.23 | |||
| hwEvpnMacLimitNotificationGroup | 1.3.6.1.4.1.2011.5.25.145.23.1 | The object indicates the alarm of MAC addresses of the EVPN instance. | ||
| hwEvpnMacLimitObjectGroup | 1.3.6.1.4.1.2011.5.25.145.23.2 | The object indicates the number of MAC addresses of the EVPN instance. | ||
| hwEvpnMacLimitTraps | 1.3.6.1.4.1.2011.5.25.145.22 | |||
| U32 hwEvpnMacLimitValue | 1.3.6.1.4.1.2011.5.25.145.21.5 | Unsigned32 | accessible-for-notify | This object indicates the max value of MAC addresses of the EVPN instance. |
| U32 hwEvpnMacLowerLimitValue | 1.3.6.1.4.1.2011.5.25.145.21.4 | Unsigned32 | accessible-for-notify | This object indicates the lower limit value of MAC addresses of the EVPN instance. |
| hwEvpnMacObjects | 1.3.6.1.4.1.2011.5.25.145.21 | |||
| NTF hwEvpnMacThresholdExceed | 1.3.6.1.4.1.2011.5.25.145.22.3 | This object indicates that the number of MAC addresses of the EVPN instance has exceeded the threshold value. | ||
| NTF hwEvpnMacThresholdExceedClear | 1.3.6.1.4.1.2011.5.25.145.22.4 | This object indicates that the number of MAC addresses of the EVPN instance has resumed from exceeding the threshold value. | ||
| U32 hwEvpnMacUpperLimitValue | 1.3.6.1.4.1.2011.5.25.145.21.3 | Unsigned32 | accessible-for-notify | This object indicates the upper limit value of MAC addresses of the EVPN instance. |
| hwGresmTokenEntry | 1.3.6.1.4.1.2011.5.25.145.14.1.1 | not-accessible | Gresm token table. | |
| NTF hwGresmTokenExceed | 1.3.6.1.4.1.2011.5.25.145.15.1 | The token count reaches the upper limit. | ||
| NTF hwGresmTokenExceedClear | 1.3.6.1.4.1.2011.5.25.145.15.2 | The token count falls from the upper limit. | ||
| hwGresmTokenGroup | 1.3.6.1.4.1.2011.5.25.145.16.2 | A collection of objects for Token alarm. | ||
| I32 hwGresmTokenMaxValue | 1.3.6.1.4.1.2011.5.25.145.14.1.1.3 | Integer32 | accessible-for-notify | This object indicates the max value of Token |
| INT hwGresmTokenMode | 1.3.6.1.4.1.2011.5.25.145.14.1.1.1 | INTEGER | accessible-for-notify | Specifies the aolloc mode of token. Options: 1. global1(1) -indicates that the global table 1 2. global2(2) -indicates that the global table 2 3. global3(3) -indicates that the global table 3 4. global4(4) -indicates that the global table 4 5. perborad(5) -indicates that the per borad |
| hwGresmTokenNotificationGroup | 1.3.6.1.4.1.2011.5.25.145.16.1 | The object indicates alarm of Token. | ||
| hwGresmTokenTable | 1.3.6.1.4.1.2011.5.25.145.14.1 | not-accessible | Gresm token table. | |
| NTF hwGresmTokenThresholdExceed | 1.3.6.1.4.1.2011.5.25.145.15.3 | The token usage exceeds the threshold. | ||
| NTF hwGresmTokenThresholdExceedClear | 1.3.6.1.4.1.2011.5.25.145.15.4 | The token usage falls from the threshold. | ||
| hwGresmTokenTrapConformance | 1.3.6.1.4.1.2011.5.25.145.16 | |||
| hwGresmTokenTraps | 1.3.6.1.4.1.2011.5.25.145.15 | |||
| I32 hwGresmTokenUsedNum | 1.3.6.1.4.1.2011.5.25.145.14.1.1.2 | Integer32 | accessible-for-notify | The object identifies the number of tokens used currently. |
| NTF hwIpv4PrefixExceed | 1.3.6.1.4.1.2011.5.25.145.10.1 | This notification is generated when the number of IPv4 prefixes exceeds or attempts to exceed the maximum allowed value as indicated by hwIpv4PrefixLimitValue. | ||
| NTF hwIpv4PrefixExceedClear | 1.3.6.1.4.1.2011.5.25.145.10.2 | This notification is generated when the number of IPv4 prefixes exceeds the value indicated by hwIpv4PrefixLimitValue, and then falls below this value. A single notification MUST be generated when this threshold is exceeded, and no other notifications of this type should be issued until the value of hwCurIpv4PrefixNum has fallen below that of hwIpv4PrefixLimitValue. | ||
| hwIpv4PrefixLimitConformance | 1.3.6.1.4.1.2011.5.25.145.12 | |||
| hwIpv4PrefixLimitNotificationGroup | 1.3.6.1.4.1.2011.5.25.145.12.1 | The object indicates alarm of ipv4 prefixs. | ||
| hwIpv4PrefixLimitObjectGroup | 1.3.6.1.4.1.2011.5.25.145.12.2 | The object indicates the number of ipv4 prefixs. | ||
| hwIpv4PrefixLimitTrapObjects | 1.3.6.1.4.1.2011.5.25.145.8 | |||
| hwIpv4PrefixLimitTraps | 1.3.6.1.4.1.2011.5.25.145.10 | |||
| U32 hwIpv4PrefixLimitValue | 1.3.6.1.4.1.2011.5.25.145.8.2 | Unsigned32 | accessible-for-notify | This object indicates the maximum number of IPv4 prefix can be added. |
| U32 hwIpv4PrefixNum | 1.3.6.1.4.1.2011.5.25.145.1.6.1 | Unsigned32 | read-only | Total number of IPv4 prefix. |
| NTF hwIpv4PrefixThresholdExceed | 1.3.6.1.4.1.2011.5.25.145.10.3 | The number of IPv4 prefixes exceeded the threshold. | ||
| NTF hwIpv4PrefixThresholdExceedClear | 1.3.6.1.4.1.2011.5.25.145.10.4 | The number of IPv4 prefixes falls below the threshold. | ||
| NTF hwIpv6PrefixExceed | 1.3.6.1.4.1.2011.5.25.145.11.1 | This notification is generated when the number of IPv6 prefixes exceeds or attempts to exceed the maximum allowed value as indicated by hwIpv6PrefixLimitValue. | ||
| NTF hwIpv6PrefixExceedClear | 1.3.6.1.4.1.2011.5.25.145.11.2 | This notification is generated when the number of IPv6 prefixes exceeds the value indicated by hwIpv6PrefixLimitValue, and then falls below this value. A single notification MUST be generated when this threshold is exceeded, and no other notifications of this type should be issued until the value of hwCurIpv6PrefixNum has fallen below that of hwIpv6PrefixLimitValue. | ||
| hwIpv6PrefixLimitConformance | 1.3.6.1.4.1.2011.5.25.145.13 | |||
| hwIpv6PrefixLimitNotificationGroup | 1.3.6.1.4.1.2011.5.25.145.13.1 | The object indicates alarm of ipv4 prefixs. | ||
| hwIpv6PrefixLimitObjectGroup | 1.3.6.1.4.1.2011.5.25.145.13.2 | The object indicates the number of ipv6 prefixs. | ||
| hwIpv6PrefixLimitTrapObjects | 1.3.6.1.4.1.2011.5.25.145.9 | |||
| hwIpv6PrefixLimitTraps | 1.3.6.1.4.1.2011.5.25.145.11 | |||
| U32 hwIpv6PrefixLimitValue | 1.3.6.1.4.1.2011.5.25.145.9.2 | Unsigned32 | accessible-for-notify | This object indicates the maximum number of IPv6 prefix can be added. |
| OCT hwIpv6PrefixLimitVpnName | 1.3.6.1.4.1.2011.5.25.145.9.3 | OCTET STRING | accessible-for-notify | The name of the IPv6 VPN instance for prefix limit. |
| U32 hwIpv6PrefixNum | 1.3.6.1.4.1.2011.5.25.145.1.6.2 | Unsigned32 | read-only | Total number of IPv6 prefix. |
| NTF hwIpv6PrefixThresholdExceed | 1.3.6.1.4.1.2011.5.25.145.11.3 | The number of IPv6 prefixes exceeded the threshold. | ||
| NTF hwIpv6PrefixThresholdExceedClear | 1.3.6.1.4.1.2011.5.25.145.11.4 | The number of IPv6 prefixes falls below the threshold. | ||
| U32 hwIpv6RouteStatActive | 1.3.6.1.4.1.2011.5.25.145.1.3.1.4 | Unsigned32 | read-only | Total number of active routes of a protocol. |
| U32 hwIpv6RouteStatAdded | 1.3.6.1.4.1.2011.5.25.145.1.3.1.5 | Unsigned32 | read-only | Total number of added routes of a protocol. |
| U32 hwIpv6RouteStatDeleted | 1.3.6.1.4.1.2011.5.25.145.1.3.1.6 | Unsigned32 | read-only | Total number of deleted routes of a protocol. |
| hwIpv6RouteStatEntry | 1.3.6.1.4.1.2011.5.25.145.1.3.1 | not-accessible | This entity is an IPv6 route statistics table. Supports the statistics of DIRECT/STATIC/BGP/OSPFv3/ISIS/RIPng routes. The indexes of this entry are hwIpv6RouteStatVpnName and hwIpv6RouteStatProtocolId. | |
| U32 hwIpv6RouteStatFreed | 1.3.6.1.4.1.2011.5.25.145.1.3.1.7 | Unsigned32 | read-only | Total number of released routes of a protocol. |
| hwIpv6RouteStatGroup | 1.3.6.1.4.1.2011.5.25.145.2.2.3 | Route statistic table group. | ||
| INT hwIpv6RouteStatProtocolId | 1.3.6.1.4.1.2011.5.25.145.1.3.1.2 | INTEGER | not-accessible | Specifies the protocol ID of the route. Options: 1. direct(1) -indicates the IPv6 direct route 2. static(2) -indicates the IPv6 static route 3. ospf(3) -indicates the IPv6 OSPF route 4. isis(6) -indicates the IPv6 IS-IS route 5. rip(7) -indicates the IPv6 RIP route 6. bgp(8) -indicates the IPv6 BGP route |
| hwIpv6RouteStatTable | 1.3.6.1.4.1.2011.5.25.145.1.3 | not-accessible | This entity is an IPv6 route statistics table. Supports the statistics of DIRECT/STATIC/BGP/OSPFv3/ISIS/RIPng routes. The indexes of this table are hwIpv6RouteStatVpnName and hwIpv6RouteStatProtocolId. | |
| U32 hwIpv6RouteStatTotal | 1.3.6.1.4.1.2011.5.25.145.1.3.1.3 | Unsigned32 | read-only | Total number of routes of a protocol. |
| OCT hwIpv6RouteStatVpnName | 1.3.6.1.4.1.2011.5.25.145.1.3.1.1 | OCTET STRING | not-accessible | The name of the IPv6 VPN instance for static routes. |
| OCT hwIpv6StaticRouteBfdName | 1.3.6.1.4.1.2011.5.25.145.1.5.1.7 | OCTET STRING | read-create | The name of a BFD session to which IPv6 static routes are to be bound. |
| OCT hwIpv6StaticRouteDescr | 1.3.6.1.4.1.2011.5.25.145.1.5.1.12 | OCTET STRING | read-create | The description of an IPv6 static route. |
| ADR hwIpv6StaticRouteDestIpAddr | 1.3.6.1.4.1.2011.5.25.145.1.5.1.2 | Ipv6Address | not-accessible | The destination IPv6 address of this route. |
| OCT hwIpv6StaticRouteDestVpnName | 1.3.6.1.4.1.2011.5.25.145.1.5.1.6 | OCTET STRING | read-create | The name of the destination VPN for IPv6 static route. |
| hwIpv6StaticRouteEntry | 1.3.6.1.4.1.2011.5.25.145.1.5.1 | not-accessible | This entity is an IPv6 static route table. Supports the create/destroy/modify/display operation on Ipv6 static routes and BFD session binding/unbinding with static routes. | |
| hwIpv6StaticRouteGroup | 1.3.6.1.4.1.2011.5.25.145.2.2.5 | IPv6 static route table group. | ||
| ADR hwIpv6StaticRouteNextHop | 1.3.6.1.4.1.2011.5.25.145.1.5.1.4 | Ipv6Address | not-accessible | The next hop of an IPv6 static route. |
| OCT hwIpv6StaticRouteNqaAdminName | 1.3.6.1.4.1.2011.5.25.145.1.5.1.8 | OCTET STRING | read-create | The admin name of a NQA to which IPv6 static routes are to be bound. |
| OCT hwIpv6StaticRouteNqaTestName | 1.3.6.1.4.1.2011.5.25.145.1.5.1.9 | OCTET STRING | read-create | The test name of a NQA to which IPv6 static routes are to be bound. |
| U32 hwIpv6StaticRouteOutIfIndex | 1.3.6.1.4.1.2011.5.25.145.1.5.1.5 | Unsigned32 | not-accessible | The interface index of the outgoing interface of an IPv6 static route. |
| U32 hwIpv6StaticRoutePrefer | 1.3.6.1.4.1.2011.5.25.145.1.5.1.10 | Unsigned32 | read-create | The preference of an IPv6 static route. |
| U32 hwIpv6StaticRoutePrefixLen | 1.3.6.1.4.1.2011.5.25.145.1.5.1.3 | Unsigned32 | not-accessible | The mask length of the IPv6 address. |
| ROW hwIpv6StaticRouteRowStatus | 1.3.6.1.4.1.2011.5.25.145.1.5.1.13 | RowStatus | read-create | The operation for an IPv6 static route. |
| OCT hwIpv6StaticRouteSourceVpnName | 1.3.6.1.4.1.2011.5.25.145.1.5.1.1 | OCTET STRING | not-accessible | The name of source VPN for IPv6 static route. |
| hwIpv6StaticRouteTable | 1.3.6.1.4.1.2011.5.25.145.1.5 | not-accessible | This entity is an IPv6 static route table. Supports the create/destroy/modify/display operation on static routes and BFD session binding/unbinding with static routes. | |
| U32 hwIpv6StaticRouteTag | 1.3.6.1.4.1.2011.5.25.145.1.5.1.11 | Unsigned32 | read-create | The tag of an IPv6 static route. |
| NTF hwL3vpnIpv6PrefixExceed | 1.3.6.1.4.1.2011.5.25.145.19.3.1 | This object indicates that the vpn instance IPv6 prefixes has exceeded the maximum vlaue. | ||
| NTF hwL3vpnIpv6PrefixExceedClear | 1.3.6.1.4.1.2011.5.25.145.19.3.2 | This object indicates that the vpn instance IPv6 prefixes have resumed from exceeding the maximum vlaue. | ||
| hwL3vpnIpv6PrefixLimitGroup | 1.3.6.1.4.1.2011.5.25.145.20.2.3 | |||
| hwL3vpnIpv6PrefixLimitNotificationGroup | 1.3.6.1.4.1.2011.5.25.145.20.2.3.1 | The object indicates alarm of ipv6 VPN instance prefixs. | ||
| hwL3vpnIpv6PrefixLimitObjectGroup | 1.3.6.1.4.1.2011.5.25.145.20.2.3.2 | The object indicates the number of ipv6 VPN instance prefixs. | ||
| hwL3vpnIpv6PrefixLimitTraps | 1.3.6.1.4.1.2011.5.25.145.19.3 | |||
| NTF hwL3vpnIpv6PrefixThresholdExceed | 1.3.6.1.4.1.2011.5.25.145.19.3.3 | This object indicates that the vpn instance IPv6 prefixes has exceeded the threshold. | ||
| U32 hwL3vpnTnlId | 1.3.6.1.4.1.2011.5.25.145.3.1.1.1 | Unsigned32 | not-accessible | The object indicates the tunnel ID. |
| OCT hwMacLimitEvpnName | 1.3.6.1.4.1.2011.5.25.145.21.1 | OCTET STRING | accessible-for-notify | The name of the EVPN instance for MAC limit. |
| U32 hwMasterSlaveFlag | 1.3.6.1.4.1.2011.5.25.145.3.3.1.4 | Unsigned32 | read-only | The object indicates the master and slave flags of a PWE3. |
| IP hwMultiHopPwe3PeerIp | 1.3.6.1.4.1.2011.5.25.145.3.5.1.4 | IpAddress | read-only | The object indicates the peer IP address of a Multi-hop PWE3. |
| U32 hwMultiHopPwe3TnlId | 1.3.6.1.4.1.2011.5.25.145.3.5.1.1 | Unsigned32 | not-accessible | The object indicates the tunnel ID. |
| U32 hwMultiHopPwe3VcId | 1.3.6.1.4.1.2011.5.25.145.3.5.1.3 | Unsigned32 | not-accessible | The object indicates the VC ID of a Multi-hop PWE3. |
| U32 hwMultiHopPwe3VcType | 1.3.6.1.4.1.2011.5.25.145.3.5.1.2 | Unsigned32 | not-accessible | The object indicates the VC type of a Multi-hop PWE3. |
| NTF hwPublicIpv4PrefixExceed | 1.3.6.1.4.1.2011.5.25.145.19.1.1 | This object indicates that the public IPv4 prefixes has exceeded the maximum value. | ||
| NTF hwPublicIpv4PrefixExceedClear | 1.3.6.1.4.1.2011.5.25.145.19.1.2 | This object indicates that the public IPv4 prefixes have resumed from exceeding the maximum vlaue. | ||
| hwPublicIpv4PrefixLimitGroup | 1.3.6.1.4.1.2011.5.25.145.20.2.1 | |||
| hwPublicIpv4PrefixLimitNotificationGroup | 1.3.6.1.4.1.2011.5.25.145.20.2.1.1 | The object indicates alarm of public ipv4 prefixs. | ||
| hwPublicIpv4PrefixLimitObjectGroup | 1.3.6.1.4.1.2011.5.25.145.20.2.1.2 | The object indicates the number of ipv4 prefixs. | ||
| hwPublicIpv4PrefixLimitTraps | 1.3.6.1.4.1.2011.5.25.145.19.1 | |||
| NTF hwPublicIpv4PrefixThresholdExceed | 1.3.6.1.4.1.2011.5.25.145.19.1.3 | This object indicates that the public IPv4 prefixes has exceeded the threshold. | ||
| NTF hwPublicIpv4PrefixThresholdExceedClear | 1.3.6.1.4.1.2011.5.25.145.19.1.4 | This object indicates that the public IPv4 prefixes have resumed from exceeding the threshold. | ||
| NTF hwPublicIpv6PrefixExceed | 1.3.6.1.4.1.2011.5.25.145.19.2.1 | This object indicates that the public IPv6 prefixes has exceeded the maximum vlaue. | ||
| NTF hwPublicIpv6PrefixExceedClear | 1.3.6.1.4.1.2011.5.25.145.19.2.2 | This object indicates that the public IPv6 prefixes have resumed from exceeding the maximum vlaue. | ||
| hwPublicIpv6PrefixLimitGroup | 1.3.6.1.4.1.2011.5.25.145.20.2.2 | |||
| hwPublicIpv6PrefixLimitNotificationGroup | 1.3.6.1.4.1.2011.5.25.145.20.2.2.1 | The object indicates alarm of ipv6 prefixs. | ||
| hwPublicIpv6PrefixLimitObjectGroup | 1.3.6.1.4.1.2011.5.25.145.20.2.2.2 | The object indicates the number of ipv6 prefixs. | ||
| hwPublicIpv6PrefixLimitTraps | 1.3.6.1.4.1.2011.5.25.145.19.2 | |||
| NTF hwPublicIpv6PrefixThresholdExceed | 1.3.6.1.4.1.2011.5.25.145.19.2.3 | This object indicates that the public IPv6 prefixes has exceeded the threshold. | ||
| NTF hwPublicIpv6PrefixThresholdExceedClear | 1.3.6.1.4.1.2011.5.25.145.19.2.4 | This object indicates that the public IPv6 prefixes have resumed from exceeding the threshold. | ||
| INT hwPwVcType | 1.3.6.1.4.1.2011.5.25.145.3.3.1.8 | INTEGER | read-only | Specifies an indication of the L2Vpn's VC encapsulation type: Options: 1: frameRelayDlciMartini(1) -indicates that the encapsulation type is Frame Relay DLCI(Martini Mode). 2: atmAal5SduVccTransport(2) -indicates that the encapsulation type is ATM AAL5 SDU VCC transport. 3: atmTransparentCellTransport(3) -indicates that the encapsulation type is ATM transparent cell transport. 4: vlan(4) -indicates that the encapsulation type is Vlan. 5: ethernet(5) -indicates that the encapsulation type is Ethernet. 6: hdlc(6) -indicates that the encapsulation type is HDLC. 7: ppp(7) -indicates that the encapsulation type is PPP. 8: cem(8) -indicates that the encapsulation type is SONET/SDH Circuit Emulation Service Over MPLS(CEM). 9: atmN2OneVccCellTransport(9) -indicates that the encapsulation type is ATM n-to-one VCC cell transport. 10: atmN2OneVpcCellTransport(10) -indicates that the encapsulation type is ATM n-to-one VPC cell transport. 11: ipLayer2Transport(11) -indicates that the encapsulation type is IP Layer2 Transport. 12: atmOne2OneVccCellMode(12) -indicates that the encapsulation type is ATM one-to-one VCC Cell Mode. 13: atmOne2OneVpcCellMode(13) -indicates that the encapsulation type is ATM one-to-one VPC Cell Mode. 14: atmAal5PduVccTransport(14) -indicates that the encapsulation type is ATM AAL5 PDU VCC transport. 15: frameRelayPortMode(15) -indicates that the encapsulation type is Frame-Relay Port mode. 16: cep(16) -indicates that the encapsulation type is SONET/SDH Circuit Emulation over Packet (CEP). 17: saE1oP(17) -indicates that the encapsulation type is Structure-agnostic E1 over Packet (SAE1oP). 18: saT1oP(18) -indicates that the encapsulation type is Structure-agnostic T1 (DS1) over Packet (SAT1oP). 19: saE3oP(19) -indicates that the encapsulation type is Structure-agnostic E3 over Packet (SAE3oP). 20: saT3oP(20) -indicates that the encapsulation type is Structure-agnostic T3 (DS3) over Packet (SAT3oP). 21: cESoPsnBasicMode(21) -indicates that the encapsulation type is CESoPSN basic mode. 22: tDMoIPbasicMode(22) -indicates that the encapsulation type is TDMoIP basic mode. 23: l2VpnCESoPSNTDMwithCAS(23) -indicates that the encapsulation type is CESoPSN TDM with CAS. 24: l2VpnTDMoIPTDMwithCAS(24) -indicates that the encapsulation type is TDMoIP TDM with CAS. 25: frameRelayDlci(25) -indicates that the encapsulation type is Frame Relay DLCI. 26: ipInterworking(64) -indicates that the encapsulation type is IP-interworking. 27: unknown(255) -indicates the unknown encapsulation type. |
| OCT hwPwVllIfName | 1.3.6.1.4.1.2011.5.25.145.3.3.1.3 | OCTET STRING | read-only | The object indicates the interface name of a PWE3. |
| IP hwPwVllPeerIp | 1.3.6.1.4.1.2011.5.25.145.3.3.1.5 | IpAddress | read-only | The object indicates the peer IP address of a PWE3. |
| U32 hwPwVllSvcFlag | 1.3.6.1.4.1.2011.5.25.145.3.3.1.7 | Unsigned32 | read-only | This object indicates the type of a PWE3. Static PWs (1) Dynamic PWs (0) |
| U32 hwPwVllTnlId | 1.3.6.1.4.1.2011.5.25.145.3.3.1.1 | Unsigned32 | not-accessible | The object indicates the tunnel ID. |
| U32 hwPwVllVcId | 1.3.6.1.4.1.2011.5.25.145.3.3.1.6 | Unsigned32 | read-only | The object indicates the VC ID of a PWE3. |
| hwRmExt | 1.3.6.1.4.1.2011.5.25.145 | This mib file is used for Manage the static route table configuration. | ||
| hwRmExtCompliance | 1.3.6.1.4.1.2011.5.25.145.2.1.1 | The compliance statement for Route Management MIB. | ||
| hwRmExtCompliances | 1.3.6.1.4.1.2011.5.25.145.2.1 | |||
| hwRmExtConformance | 1.3.6.1.4.1.2011.5.25.145.2 | |||
| hwRmExtGroups | 1.3.6.1.4.1.2011.5.25.145.2.2 | |||
| hwRmExtObjects | 1.3.6.1.4.1.2011.5.25.145.1 | |||
| hwRmExtRouteCompliances | 1.3.6.1.4.1.2011.5.25.145.20.1 | The compliance statement for HUAWEI-RM-EXT-MIB. | ||
| hwRmExtRouteConformance | 1.3.6.1.4.1.2011.5.25.145.20 | |||
| hwRmExtRouteGroup | 1.3.6.1.4.1.2011.5.25.145.20.2 | |||
| hwRmExtRouteObjects | 1.3.6.1.4.1.2011.5.25.145.17 | |||
| hwRmExtRouteTrapObjects | 1.3.6.1.4.1.2011.5.25.145.18 | |||
| hwRmExtRouteTraps | 1.3.6.1.4.1.2011.5.25.145.19 | |||
| hwRmGresmTokenObjects | 1.3.6.1.4.1.2011.5.25.145.14 | |||
| hwRmInfo | 1.3.6.1.4.1.2011.5.25.145.1.6 | |||
| hwRmInfoGroup | 1.3.6.1.4.1.2011.5.25.145.2.2.6 | Route resource group. | ||
| U32 hwRouteStatActive | 1.3.6.1.4.1.2011.5.25.145.1.2.1.4 | Unsigned32 | read-only | Total number of active routes of a protocol. |
| U32 hwRouteStatAdded | 1.3.6.1.4.1.2011.5.25.145.1.2.1.5 | Unsigned32 | read-only | Total number of added routes of a protocol. |
| U32 hwRouteStatDeleted | 1.3.6.1.4.1.2011.5.25.145.1.2.1.6 | Unsigned32 | read-only | Total number of deleted routes of a protocol. |
| hwRouteStatEntry | 1.3.6.1.4.1.2011.5.25.145.1.2.1 | not-accessible | This entity is a route statistics table. The indexes of this entry are hwRouteStatVpnName and hwRouteStatProtocolId. | |
| U32 hwRouteStatFreed | 1.3.6.1.4.1.2011.5.25.145.1.2.1.7 | Unsigned32 | read-only | Total number of released routes of a protocol. |
| hwRouteStatGroup | 1.3.6.1.4.1.2011.5.25.145.2.2.2 | Route statistic table group. | ||
| INT hwRouteStatProtocolId | 1.3.6.1.4.1.2011.5.25.145.1.2.1.2 | INTEGER | not-accessible | Specifies the protocol ID of the route. Options: 1. direct(1) -indicates the direct route 2. static(2) -indicates the static route 3. ospf(3) -indicates the OSPF route 4. isis(6) -indicates the IS-IS route 5. rip(7) -indicates the RIP route 6. bgp(8) -indicates the BGP route |
| hwRouteStatTable | 1.3.6.1.4.1.2011.5.25.145.1.2 | not-accessible | This entity is a route statistics table. The indexes of this table are hwRouteStatVpnName and hwRouteStatProtocolId. | |
| U32 hwRouteStatTotal | 1.3.6.1.4.1.2011.5.25.145.1.2.1.3 | Unsigned32 | read-only | Total number of routes of a protocol. |
| OCT hwRouteStatVpnName | 1.3.6.1.4.1.2011.5.25.145.1.2.1.1 | OCTET STRING | not-accessible | The name of the VPN instance for static routes. |
| OCT hwStaticRouteBfdName | 1.3.6.1.4.1.2011.5.25.145.1.1.1.7 | OCTET STRING | read-create | This object indicates the name of a BFD session to which static routes are to be bound. |
| OCT hwStaticRouteBfdNameExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.7 | OCTET STRING | read-create | This object indicates the name of a BFD session to which static routes are to be bound. |
| OCT hwStaticRouteDescrip | 1.3.6.1.4.1.2011.5.25.145.1.1.1.9 | OCTET STRING | read-create | The description of the static routes. |
| OCT hwStaticRouteDescripExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.9 | OCTET STRING | read-create | The description of static route. |
| IP hwStaticRouteDestIpAddr | 1.3.6.1.4.1.2011.5.25.145.1.1.1.2 | IpAddress | not-accessible | The destination IP address of this route. |
| IP hwStaticRouteDestIpAddrExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.2 | IpAddress | not-accessible | The destination IP address of this route. |
| IP hwStaticRouteDestMaskAddr | 1.3.6.1.4.1.2011.5.25.145.1.1.1.3 | IpAddress | not-accessible | Indicate the mask of the destination address. |
| IP hwStaticRouteDestMaskAddrExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.3 | IpAddress | not-accessible | The mask of the destination address. |
| OCT hwStaticRouteDestVpnName | 1.3.6.1.4.1.2011.5.25.145.1.1.1.4 | OCTET STRING | not-accessible | The destination VPN for gateway address. |
| OCT hwStaticRouteDestVpnNameExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.6 | OCTET STRING | read-create | The name of the destination VPN for gateway address. |
| hwStaticRouteEntry | 1.3.6.1.4.1.2011.5.25.145.1.1.1 | not-accessible | The table is used for creating static routes. The indexes of this entry are hwStaticRouteSourceVpnName, hwStaticRouteDestIpAddr,hwStaticRouteDestMaskAddr, hwStaticRouteDestVpnName,hwStaticRouteNextHop,hwStaticRouteOutIfIndex. | |
| hwStaticRouteExtEntry | 1.3.6.1.4.1.2011.5.25.145.1.4.1 | not-accessible | This entity is a static route table. Supports the create/destroy/modify/display operation on static routes and BFD session binding/unbinding with static routes. The indexes of this entry are hwStaticRouteSourceVpnNameExt, hwStaticRouteDestIpAddrExt, hwStaticRouteDestMaskAddrExt, hwStaticRouteNextHopExt, and hwStaticRouteOutIfIndexExt. | |
| hwStaticRouteExtGroup | 1.3.6.1.4.1.2011.5.25.145.2.2.4 | Static route table group. | ||
| hwStaticRouteExtTable | 1.3.6.1.4.1.2011.5.25.145.1.4 | not-accessible | This entity is a static route table. Supports the create/destroy/modify/display operation on static routes and BFD session binding/unbinding with static routes. The indexes of this table are hwStaticRouteSourceVpnNameExt, hwStaticRouteDestIpAddrExt, hwStaticRouteDestMaskAddrExt, hwStaticRouteNextHopExt, and hwStaticRouteOutIfIndexExt. | |
| hwStaticRouteGroup | 1.3.6.1.4.1.2011.5.25.145.2.2.1 | Static routes table group. | ||
| INT hwStaticRouteLdpSyncExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.12 | INTEGER | read-create | Specifies the LdpSync-Advertising attribute of the static route: Options: 1. none(0) -indicates that the LdpSync-Advertising attribute is not specified 2. ldpsync(1) -indicates that the LdpSync-Advertising attribute is specified |
| IP hwStaticRouteNextHop | 1.3.6.1.4.1.2011.5.25.145.1.1.1.5 | IpAddress | not-accessible | The next hop of static routes. |
| IP hwStaticRouteNextHopExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.4 | IpAddress | not-accessible | The next hop of static route. |
| U32 hwStaticRouteOutIfIndex | 1.3.6.1.4.1.2011.5.25.145.1.1.1.6 | Unsigned32 | not-accessible | The out interface ifnet index of static routes. |
| U32 hwStaticRouteOutIfIndexExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.5 | Unsigned32 | not-accessible | The ifnet index of the outgoing interface of static route. |
| INT hwStaticRoutePermanentExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.11 | INTEGER | read-create | Specifies the permanent-Advertising attribute of the static route: Options: 1. none(0) -indicates that the permanent-Advertising attribute is not specified 2. permanent(1) -indicates that the permanent-Advertising attribute is specified |
| I32 hwStaticRoutePrefer | 1.3.6.1.4.1.2011.5.25.145.1.1.1.8 | Integer32 | read-create | The preference of static routes. |
| U32 hwStaticRoutePreferExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.8 | Unsigned32 | read-create | The preference of static route. |
| ROW hwStaticRouteRowStatus | 1.3.6.1.4.1.2011.5.25.145.1.1.1.10 | RowStatus | read-create | Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1) 2. createAndGo(4) -create a static route 3. destroy(6) -delete a static route |
| ROW hwStaticRouteRowStatusExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.10 | RowStatus | read-create | The operation for static route. |
| OCT hwStaticRouteSourceVpnName | 1.3.6.1.4.1.2011.5.25.145.1.1.1.1 | OCTET STRING | not-accessible | The source VPN of static routes. |
| OCT hwStaticRouteSourceVpnNameExt | 1.3.6.1.4.1.2011.5.25.145.1.4.1.1 | OCTET STRING | not-accessible | The name of source VPN for static route. |
| hwStaticRouteTable | 1.3.6.1.4.1.2011.5.25.145.1.1 | not-accessible | The table is used for creating static routes. The indexes of this table are hwStaticRouteSourceVpnName, hwStaticRouteDestIpAddr,hwStaticRouteDestMaskAddr, hwStaticRouteDestVpnName,hwStaticRouteNextHop,hwStaticRouteOutIfIndex. | |
| U32 hwSvcReceiveLabel | 1.3.6.1.4.1.2011.5.25.145.3.3.1.9 | Unsigned32 | read-only | This object indicates the inbound label. |
| U32 hwSvcTransmitLabel | 1.3.6.1.4.1.2011.5.25.145.3.3.1.10 | Unsigned32 | read-only | This object indicates the outbound label. |
| hwTnl2L3vpnEntry | 1.3.6.1.4.1.2011.5.25.145.3.1.1 | not-accessible | This object indicates the tunnel ID and L3VPN table of this entity. The indexes of this entry are hwL3vpnTnlId and hwVpnIndex. | |
| hwTnl2L3vpnGroup | 1.3.6.1.4.1.2011.5.25.145.4.2.1 | The object indicates the tunnel ID and L3VPN table group. | ||
| hwTnl2L3vpnTable | 1.3.6.1.4.1.2011.5.25.145.3.1 | not-accessible | This object indicates the tunnel ID and L3VPN table of this entity. The indexes of this table are hwL3vpnTnlId and hwVpnIndex. | |
| hwTnl2MultiHopPwe3Entry | 1.3.6.1.4.1.2011.5.25.145.3.5.1 | not-accessible | This object indicates the tunnel ID and Multi-hop PWE3 table of this entity. The indexes of this entry are hwMultiHopPwe3TnlId, hwMultiHopPwe3VcType, and hwMultiHopPwe3VcId. | |
| hwTnl2MultiHopPwe3Group | 1.3.6.1.4.1.2011.5.25.145.4.2.5 | The object indicates the tunnel ID and Multi-hop PWE3 table group. | ||
| hwTnl2MultiHopPwe3Table | 1.3.6.1.4.1.2011.5.25.145.3.5 | not-accessible | This object indicates the tunnel ID and Multi-hop PWE3 table of this entity. The indexes of this table are hwMultiHopPwe3TnlId, hwMultiHopPwe3VcType, and hwMultiHopPwe3VcId. | |
| hwTnl2Pwe3VllEntry | 1.3.6.1.4.1.2011.5.25.145.3.3.1 | not-accessible | The object indicates the tunnel ID and PWE3/VLL table of this entity. The indexes of this entry are hwPwVllTnlId and hwAcIndex. | |
| hwTnl2Pwe3VllGroup | 1.3.6.1.4.1.2011.5.25.145.4.2.3 | The object indicates the tunnel ID and PWE3/VLL table group. | ||
| hwTnl2Pwe3VllTable | 1.3.6.1.4.1.2011.5.25.145.3.3 | not-accessible | The object indicates the tunnel ID and PWE3/VLL table of this entity. The indexes of this table are hwPwVllTnlId and hwAcIndex. | |
| hwTnl2VplsEntry | 1.3.6.1.4.1.2011.5.25.145.3.2.1 | not-accessible | The object indicates the tunnel ID and VPLS table of this entity. The indexes of this entry are hwVplsTnlId and hwVplsVcId. | |
| hwTnl2VplsGroup | 1.3.6.1.4.1.2011.5.25.145.4.2.2 | The object indicates the tunnel ID and VPLS table group. | ||
| hwTnl2VplsTable | 1.3.6.1.4.1.2011.5.25.145.3.2 | not-accessible | The object indicates the tunnel ID and VPLS table of this entity. The indexes of this table are hwVplsTnlId and hwVplsVcId. | |
| IP hwTnlDestination | 1.3.6.1.4.1.2011.5.25.145.5.1 | IpAddress | accessible-for-notify | The destination of the tunnel group. |
| hwTnlGroupNotificationGroup | 1.3.6.1.4.1.2011.5.25.145.7.1 | The object indicates the Up/Down state of the tunnel group. | ||
| hwTnlGroupObjectGroup | 1.3.6.1.4.1.2011.5.25.145.7.2 | The object indicates the compliance statement for tunnel group trap. | ||
| hwTnlGroupTrapConformance | 1.3.6.1.4.1.2011.5.25.145.7 | |||
| hwTnlGroupTrapObjects | 1.3.6.1.4.1.2011.5.25.145.5 | |||
| hwTnlGroupTraps | 1.3.6.1.4.1.2011.5.25.145.6 | |||
| hwTnlIf2TnlIdEntry | 1.3.6.1.4.1.2011.5.25.145.3.4.1 | not-accessible | This object indicates the tunnel interface and tunnel ID table of this entity. The index of this entry is hwTunnelIf. | |
| hwTnlIf2TnlIdGroup | 1.3.6.1.4.1.2011.5.25.145.4.2.4 | The object indicates the tunnel interface name and tunnel ID table group. | ||
| hwTnlIf2TnlIdTable | 1.3.6.1.4.1.2011.5.25.145.3.4 | not-accessible | This object indicates the tunnel interface and tunnel ID table of this entity. The index of this table is hwTunnelIf. | |
| OCT hwTnlPolicy | 1.3.6.1.4.1.2011.5.25.145.5.2 | OCTET STRING | accessible-for-notify | Tunnel policy name. |
| hwTunnelExtCompliance | 1.3.6.1.4.1.2011.5.25.145.4.1.1 | The object indicates the compliance statement for route management MIB. | ||
| hwTunnelExtCompliances | 1.3.6.1.4.1.2011.5.25.145.4.1 | |||
| hwTunnelExtConformance | 1.3.6.1.4.1.2011.5.25.145.4 | |||
| hwTunnelExtGroups | 1.3.6.1.4.1.2011.5.25.145.4.2 | |||
| hwTunnelExtObjects | 1.3.6.1.4.1.2011.5.25.145.3 | |||
| NTF hwTunnelGroupDown | 1.3.6.1.4.1.2011.5.25.145.6.2 | Tunnels selected by the applications are defined by the next hop and the tunnel policy. If any one of the tunnels used for load balancing is Up, this trap will be sent to the user. | ||
| NTF hwTunnelGroupUp | 1.3.6.1.4.1.2011.5.25.145.6.1 | Tunnels selected by the applications are defined by the next hop and the tunnel policy. If all the tunnels used for load balancing are Down, this trap will be sent to the user. | ||
| U32 hwTunnelId | 1.3.6.1.4.1.2011.5.25.145.3.4.1.2 | Unsigned32 | read-only | The object indicates the tunnel ID. |
| OCT hwTunnelIf | 1.3.6.1.4.1.2011.5.25.145.3.4.1.1 | OCTET STRING | not-accessible | The object indicates the tunnel interface name. |
| IP hwVplsPeerIp | 1.3.6.1.4.1.2011.5.25.145.3.2.1.7 | IpAddress | read-only | The object indicates the peer IP address of a VPLS. |
| U32 hwVplsTnlId | 1.3.6.1.4.1.2011.5.25.145.3.2.1.1 | Unsigned32 | not-accessible | The object indicates the tunnel ID. |
| U32 hwVplsVcId | 1.3.6.1.4.1.2011.5.25.145.3.2.1.2 | Unsigned32 | not-accessible | The object indicates the VC ID of a VPLS. |
| U32 hwVplsVcType | 1.3.6.1.4.1.2011.5.25.145.3.2.1.6 | Unsigned32 | read-only | The object indicates the VC type of a VPLS. |
| U32 hwVpnIndex | 1.3.6.1.4.1.2011.5.25.145.3.1.1.2 | Unsigned32 | not-accessible | The object indicates the VRF index of a VPN. |
| OCT hwVpnName | 1.3.6.1.4.1.2011.5.25.145.3.1.1.3 | OCTET STRING | read-only | The object indicates the VPN name. |
| U32 hwVsiId | 1.3.6.1.4.1.2011.5.25.145.3.2.1.4 | Unsigned32 | read-only | The object indicates the VSI ID of a VPLS. |
| U32 hwVsiIndex | 1.3.6.1.4.1.2011.5.25.145.3.2.1.3 | Unsigned32 | read-only | The object indicates the VSI index of a VPLS. |
| OCT hwVsiName | 1.3.6.1.4.1.2011.5.25.145.3.2.1.5 | OCTET STRING | read-only | The object indicates the VSI name of a VPLS. |
RFC description
Static route table and IPv6 prefix management for Huawei network devices.
Start monitoring Huawei router (static route table configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.