All MIBs › HUAWEI-QINQ-MIB
Organization: Huawei Technologies Co.,Ltd.
Last Updated: 2006-12-14
Category: Technology: Switching/L2, Technology: VLAN, VLAN and Bridging, Vendor: Huawei
Description: Huawei QinQ (IEEE 802.1ad) MIB for managing double-tagged VLAN stacking, SVLAN/CVLAN mappings, and provider bridging.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-QINQ-MIB?
HUAWEI-QINQ-MIB is a Huawei enterprise MIB for managing QinQ (IEEE 802.1ad, VLAN stacking) on Huawei switches and routers, a technology that nests a service-provider VLAN tag (SVLAN) around a customer VLAN tag (CVLAN) to scale VLAN space in provider networks. It exposes configuration objects at both the system and interface level describing QinQ mode, SVLAN/CVLAN mapping tables, and provider-bridging behavior. From a monitoring perspective it is used to confirm that the correct QinQ mode and VLAN mapping are actually applied on each interface, verifying operational configuration state rather than hardware health, which helps catch VLAN stacking misconfigurations that would break service delivery. It relies on the IEEE 802.1ad/802.1Q VLAN tagging standards conceptually, though it is implemented as a Huawei-specific MIB alongside other hwDatacomm modules. It is deployed on Huawei carrier-class and enterprise switches used in metro Ethernet and provider-bridging network designs. Network engineers evaluating or troubleshooting this functionality can download the HUAWEI-QINQ-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-QINQ-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei enterprise/carrier switch
- Huawei provider-bridging network equipment
Monitoring Examples
A typical structure would include an interface-indexed QinQ mode/mapping table (e.g., an hwQinQ*Table/Entry pattern) holding SVLAN and CVLAN identifiers per port. An administrator would poll such a table to verify that a given access port is correctly stacking a specific CVLAN inside the expected SVLAN, and an unexpected or missing mapping would reveal a provisioning error causing customer traffic to be dropped or misrouted.
What Can Be Monitored
- QinQ operating mode
- SVLAN to CVLAN mapping
- per-interface VLAN stacking configuration
- provider bridging status
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-L2IF-MIB
| VlanList |
From HUAWEI-MIB
| hwDatacomm | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndex |
From P-BRIDGE-MIB
| EnabledStatus |
From Q-BRIDGE-MIB
| VlanId |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION |
How to Use in IPNetwork Monitor
Example using hwQinQSubIfStackingStatOutPackets OID:
Select a Huawei enterprise/carrier switch (802.1ad QinQ VLAN stacking) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwQinQSubIfStackingStatOutPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total number of out packets of the sub interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwQinQ | 1.3.6.1.4.1.2011.5.25.116 | The QinQ MIB module is defined to manage the configuration under system or interface view. | ||
| hwQinQSystemBase | 1.3.6.1.4.1.2011.5.25.116.1 | |||
| MAC hwQinQSystemWellKnowMac | 1.3.6.1.4.1.2011.5.25.116.1.1 | MacAddress | read-write | The destination MAC address that is replaced the original destination macAddress is a wellknown multicast macAddress to hide the inner details of the BPDU in order to that it can be transmitted with a tag through the services'network. |
| INT hwQinQSystemBridgeRole | 1.3.6.1.4.1.2011.5.25.116.1.2 | INTEGER | read-write | It indicates the Bridge 's location, having two possible values :Customers' Bridge and Providers' Bridge. |
| I32 hwBpduSystemDropPacketSta | 1.3.6.1.4.1.2011.5.25.116.1.3 | Integer32 | read-write | View statistics about the discarded BPDUs. |
| U32 hwQinQSystemEtherType | 1.3.6.1.4.1.2011.5.25.116.1.4 | Unsigned32 | read-write | The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ. Default is '8100'h. |
| hwQinQMngObjects | 1.3.6.1.4.1.2011.5.25.116.2 | |||
| hwQinQBpduTunnelTable | 1.3.6.1.4.1.2011.5.25.116.2.1 | not-accessible | QinQ-port configuration table. | |
| hwQinQBpduTunnelEntry | 1.3.6.1.4.1.2011.5.25.116.2.1.1 | not-accessible | The entry of an interface enabled the QinQ function. | |
| I32 hwQinQBpduTunnelIndex | 1.3.6.1.4.1.2011.5.25.116.2.1.1.1 | Integer32 | not-accessible | Index number of the interface. |
| OCT hwQinQEtherEncpsType | 1.3.6.1.4.1.2011.5.25.116.2.1.1.2 | OCTET STRING | read-write | The value of tag type is encapsulated in the head of the Ethernet frame To distinguish the encapsulated mode between the 802.1Q and QinQ. |
| ENA hwQinQBpduTunnelEnableOneQBpduTunnel | 1.3.6.1.4.1.2011.5.25.116.2.1.1.3 | EnabledStatus | read-write | The value indicates whether the 1Q-bpdutunnel is opened, If hwQinQBpduTunnelEnableTwoQBpduTunnel is enabling, then this value should be disable. |
| ENA hwQinQBpduTunnelEnableBpduTag | 1.3.6.1.4.1.2011.5.25.116.2.1.1.4 | EnabledStatus | read-only | Whether to enable the setting of BPDU Tunnel tag. Default is disabled. |
| ENA hwQinQBpduTunnelEnableTwoQBpduTunnel | 1.3.6.1.4.1.2011.5.25.116.2.1.1.5 | EnabledStatus | read-only | The value indicates whether the 2Q-bpdutunnel is opened, If hwQinQBpduTunnelEnableOneQBpduTunnel is enabling, then this value should be disable. Default is disabled. |
| I32 hwQinQBpduTunnelCustomerBpduTag | 1.3.6.1.4.1.2011.5.25.116.2.1.1.6 | Integer32 | read-write | The tag is inserted into the head of the BPDU ,to support that can be transmitted through the services' network. |
| OCT hwQinQBpduTunnelCustomerBpduTagListLow | 1.3.6.1.4.1.2011.5.25.116.2.1.1.7 | OCTET STRING | read-write | The list describes accessible bode from different vlan (0 to 2047). |
| OCT hwQinQBpduTunnelCustomerBpduTagListHigh | 1.3.6.1.4.1.2011.5.25.116.2.1.1.8 | OCTET STRING | read-write | The list describes accessible bpdu from different vlan (2048 to 4094). |
| INT hwQinQRemarkOuterTpid | 1.3.6.1.4.1.2011.5.25.116.2.1.1.9 | INTEGER | read-write | The value indicates the TPID of outer tag of packets that have two tag and output from the output interface of vlan-switch, If hwQinQEtherEncpsType is enabling, then this value should be 0xffff. |
| ENA hwQinQBpduTunnelEnableBpduFilter | 1.3.6.1.4.1.2011.5.25.116.2.1.1.10 | EnabledStatus | read-write | The value indicates whether the BPDU filter function is enabled. If hwQinQBpduTunnelEnableBpduFilter is enabled, then this value should be enable. |
| hwQinQSubIfVlanStackingTable | 1.3.6.1.4.1.2011.5.25.116.2.2 | not-accessible | Used to configure packets'vlan stacking in sub interface, receive one-tag packets and transmit two-tag packets, where the outer-tag inserted is in hwQinQSubIfVlanStackingTable. | |
| hwQinQSubIfVlanStackingEntry | 1.3.6.1.4.1.2011.5.25.116.2.2.1 | not-accessible | The entry of an interface enabled the QinQ-stacking function. | |
| NUM hwQinQSubIfStackingIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.2.1.1 | InterfaceIndex | not-accessible | Index number of the QinQ-stacking interface. |
| VLA hwQinQSubIfStackingCEVlanStart | 1.3.6.1.4.1.2011.5.25.116.2.2.1.2 | VlanId | not-accessible | When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id. |
| VLA hwQinQSubIfStackingCEVlanEnd | 1.3.6.1.4.1.2011.5.25.116.2.2.1.3 | VlanId | read-create | When configure ce vlan as a range, hwQinQSubIfStackingCEVlanStart is the start vlan id and hwQinQSubIfStackingCEVlanEnd is the end vlan id. |
| I32 hwQinQSubIfStackGroupId | 1.3.6.1.4.1.2011.5.25.116.2.2.1.4 | Integer32 | read-create | Group-management id. |
| ROW hwQinQSubIfStackingRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.2.1.5 | RowStatus | read-create | Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfVlanStackingTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfVlanStackingTable. |
| I32 hwQinQSubIfStackingPEVlan | 1.3.6.1.4.1.2011.5.25.116.2.2.1.6 | Integer32 | read-create | PE vlan id. |
| hwQinQSubIfStackingStatTable | 1.3.6.1.4.1.2011.5.25.116.2.3 | not-accessible | When a sub interface configured QinQ-stacking function, hwQinQSubIfStackingStatTable is used to statistic total number of the out packets and in packets. | |
| hwQinQSubIfStackingStatEntry | 1.3.6.1.4.1.2011.5.25.116.2.3.1 | not-accessible | The entry of an interface enabled the QinQ-stacking function. | |
| NUM hwQinQSubIfStackingStatIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.3.1.1 | InterfaceIndex | not-accessible | Index number of the QinQ-stacking interface. |
| VLA hwQinQSubIfStackingStatCEVlan | 1.3.6.1.4.1.2011.5.25.116.2.3.1.2 | VlanId | not-accessible | Inner vlan in packets which input the QinQ sub interface, used to indicate the packets as an index. |
| I32 hwQinQSubIfStackStatGroupId | 1.3.6.1.4.1.2011.5.25.116.2.3.1.3 | Integer32 | read-only | The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled. |
| C64 hwQinQSubIfStackingStatOutPacketsEx | 1.3.6.1.4.1.2011.5.25.116.2.3.1.4 | Counter64 | read-only | Total number of out packets of the sub interface. |
| C64 hwQinQSubIfStackingStatOutBytes | 1.3.6.1.4.1.2011.5.25.116.2.3.1.5 | Counter64 | read-only | Total number of out bytes of the sub interface. |
| C64 hwQinQSubIfStackingStatInPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.6 | Counter64 | read-only | Total number of in packets of the sub interface. |
| C64 hwQinQSubIfStackingStatInBytes | 1.3.6.1.4.1.2011.5.25.116.2.3.1.7 | Counter64 | read-only | Total number of in bytes of the sub interface. |
| C64 hwQinQSubIfStackStatOutBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.8 | Counter64 | read-only | Total number of broadcast packets transmitted out of the sub interface. |
| C64 hwQinQSubIfStackStatInBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.9 | Counter64 | read-only | Total number of broadcast packets received from the sub interface. |
| C64 hwQinQSubIfStackStatOutMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.10 | Counter64 | read-only | Total number of multicast packets transmitted out of the sub interface. |
| C64 hwQinQSubIfStackStatInMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.11 | Counter64 | read-only | Total number of multicast packets received from the sub interface. |
| C64 hwQinQSubIfStackStatOutUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.12 | Counter64 | read-only | Total number of unicast packets transmitted out of the sub interface. |
| C64 hwQinQSubIfStackStatInUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.3.1.13 | Counter64 | read-only | Total number of unicast packets received from the sub interface. |
| hwQinQSubIfTermTable | 1.3.6.1.4.1.2011.5.25.116.2.4 | not-accessible | The table is used to configure QinQ-termination function in sub interface, then packets transmitted from this sub interface input with two tags will be terminated. | |
| hwQinQSubIfTermEntry | 1.3.6.1.4.1.2011.5.25.116.2.4.1 | not-accessible | The entry of an interface enabled the QinQ-termination function. | |
| NUM hwQinQSubIfTermIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.4.1.1 | InterfaceIndex | not-accessible | Index number of the QinQ-termination interface. |
| VLA hwQinQSubIfTermPEVlan | 1.3.6.1.4.1.2011.5.25.116.2.4.1.2 | VlanId | not-accessible | Outer vlan id of the packets which have two tags before being terminated. |
| VLA hwQinQSubIfTermCEVlanStart | 1.3.6.1.4.1.2011.5.25.116.2.4.1.3 | VlanId | not-accessible | When configure ce vlan as a range, hwQinQSubIfTermCEVlanStart is the start vlan id and hwQinQSubIfTermCEVlanEnd is the end vlan id. |
| VLA hwQinQSubIfTermCEVlanEnd | 1.3.6.1.4.1.2011.5.25.116.2.4.1.4 | VlanId | read-create | When configure ce vlan as a range, hwQinQSubIfTermCEVlanStart is the start vlan id and hwQinQSubIfTermCEVlanEnd is the end vlan id. |
| I32 hwQinQSubIfTermGroupId | 1.3.6.1.4.1.2011.5.25.116.2.4.1.5 | Integer32 | read-create | Group-management id. |
| ROW hwQinQSubIfTermRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.4.1.6 | RowStatus | read-create | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfTermTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfTermTable. |
| hwQinQSubIfTermStatTable | 1.3.6.1.4.1.2011.5.25.116.2.5 | not-accessible | When a sub interface configured QinQ-termination function, hwQinQSubIfTermStatTable used to statistic total number of the out packets and in packets. | |
| hwQinQSubIfTermStatEntry | 1.3.6.1.4.1.2011.5.25.116.2.5.1 | not-accessible | The entry of an interface enabled the QinQ-termination function. | |
| NUM hwQinQSubIfTermStatIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.5.1.1 | InterfaceIndex | not-accessible | Index number of the QinQ-termination interface. |
| VLA hwQinQSubIfTermStatPEVlan | 1.3.6.1.4.1.2011.5.25.116.2.5.1.2 | VlanId | not-accessible | Outer vlan in packets which input the QinQ sub interface, used to indicate the packets as an index. |
| VLA hwQinQSubIfTermStatCEVlan | 1.3.6.1.4.1.2011.5.25.116.2.5.1.3 | VlanId | not-accessible | Inner vlan in packets which input the QinQ sub interface, used to indicate the packets as an index. |
| I32 hwQinQSubIfTermStatGroupId | 1.3.6.1.4.1.2011.5.25.116.2.5.1.4 | Integer32 | read-only | The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled. |
| C64 hwQinQSubIfTermStatOutPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.5 | Counter64 | read-only | Total number of out packets of the sub interface. |
| C64 hwQinQSubIfTermStatOutBytes | 1.3.6.1.4.1.2011.5.25.116.2.5.1.6 | Counter64 | read-only | Total number of out bytes of the sub interface. |
| C64 hwQinQSubIfTermStatInPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.7 | Counter64 | read-only | Total number of in packets of the sub interface. |
| C64 hwQinQSubIfTermStatInBytes | 1.3.6.1.4.1.2011.5.25.116.2.5.1.8 | Counter64 | read-only | Total number of in bytes of the sub interface. |
| C64 hwQinQSubIfTermStatOutBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.9 | Counter64 | read-only | Total number of broadcast packets transmitted out of the sub interface. |
| C64 hwQinQSubIfTermStatInBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.10 | Counter64 | read-only | Total number of broadcast packets received from the sub interface. |
| C64 hwQinQSubIfTermStatOutMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.11 | Counter64 | read-only | Total number of multicast packets transmitted out of the sub interface. |
| C64 hwQinQSubIfTermStatInMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.12 | Counter64 | read-only | Total number of multicast packets received from the sub interface. |
| C64 hwQinQSubIfTermStatOutUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.13 | Counter64 | read-only | Total number of unicast packets transmitted out of the sub interface. |
| C64 hwQinQSubIfTermStatInUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.5.1.14 | Counter64 | read-only | Total number of unicast packets received from the sub interface. |
| hwQinQStaticARPCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.6 | not-accessible | The table is used to configure QinQ static ARP. | |
| hwQinQStaticARPCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.6.1 | not-accessible | The entry of an interface enabled the QinQ function. | |
| NUM hwQinQStaticARPCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.6.1.1 | InterfaceIndex | not-accessible | The interface's Index. |
| IP hwQinQStaticARPCfgIp | 1.3.6.1.4.1.2011.5.25.116.2.6.1.2 | IpAddress | not-accessible | The IP address. |
| MAC hwQinQStaticARPCfgMac | 1.3.6.1.4.1.2011.5.25.116.2.6.1.3 | MacAddress | read-create | The MAC address. |
| VLA hwQinQStaticARPCfgVlan | 1.3.6.1.4.1.2011.5.25.116.2.6.1.4 | VlanId | read-create | The first vlan id. |
| I32 hwQinQStaticARPCfgCEVlan | 1.3.6.1.4.1.2011.5.25.116.2.6.1.5 | Integer32 | read-create | The second vlan id. |
| ROW hwQinQStaticARPCfgRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.6.1.6 | RowStatus | read-create | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQStaticARPCfgTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQStaticARPCfgTable. |
| hwQinQStaticMACCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.7 | not-accessible | The table is used to configure static MAC. | |
| hwQinQStaticMACCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.7.1 | not-accessible | The entry of an interface enabled the QinQ function. | |
| MAC hwQinQStaticMACCfgMac | 1.3.6.1.4.1.2011.5.25.116.2.7.1.1 | MacAddress | not-accessible | The MAC address. |
| VLA hwQinQStaticMACCfgVlan | 1.3.6.1.4.1.2011.5.25.116.2.7.1.2 | VlanId | not-accessible | Vlan id that the MAC address belongs to. |
| OCT hwQinQStaticMACCfgVsiName | 1.3.6.1.4.1.2011.5.25.116.2.7.1.3 | OCTET STRING | not-accessible | Name of VSI that the MAC address belongs to. |
| VLA hwQinQStaticMACCfgPEVlan | 1.3.6.1.4.1.2011.5.25.116.2.7.1.4 | VlanId | read-create | PE vlan id for a Network Management Application attempts to configure hwQinQStaticMACCfgTable. |
| I32 hwQinQStaticMACCfgCEVlan | 1.3.6.1.4.1.2011.5.25.116.2.7.1.5 | Integer32 | read-create | CE vlan id. |
| INT hwQinQStaticMACCfgType | 1.3.6.1.4.1.2011.5.25.116.2.7.1.6 | INTEGER | read-create | The type of the MAC. |
| NUM hwQinQStaticMACCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.7.1.7 | InterfaceIndex | read-create | Index number of the interface. |
| INT hwQinQStaticMACCfgFlag | 1.3.6.1.4.1.2011.5.25.116.2.7.1.8 | INTEGER | read-create | The config type. |
| ROW hwQinQStaticMACCfgRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.7.1.9 | RowStatus | read-create | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQStaticMACCfgTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQStaticMACCfgTable. |
| hwQinQSubIfDot1qTermTable | 1.3.6.1.4.1.2011.5.25.116.2.8 | not-accessible | Used to configure Dot1q-termination function in sub interface ,then packets transmitted from this sub interface input with one tag will be terminated. | |
| hwQinQSubIfDot1qTermEntry | 1.3.6.1.4.1.2011.5.25.116.2.8.1 | not-accessible | The entry of an interface enabled the Dot1q-termination function. | |
| NUM hwQinQSubIfDot1qTermIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.8.1.1 | InterfaceIndex | not-accessible | Index number of the Dot1q-termination interface. |
| VLA hwQinQSubIfDot1qTermVidStart | 1.3.6.1.4.1.2011.5.25.116.2.8.1.2 | VlanId | not-accessible | When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id. |
| VLA hwQinQSubIfDot1qTermVidEnd | 1.3.6.1.4.1.2011.5.25.116.2.8.1.3 | VlanId | read-create | When configure ce vlan as a range, hwQinQSubIfDot1qTermCEVlanStart is the start vlan id and hwQinQSubIfDot1qTermCEVlanEnd is the end vlan id. |
| I32 hwQinQSubIfDot1qTermGroupId | 1.3.6.1.4.1.2011.5.25.116.2.8.1.4 | Integer32 | read-create | Group-management id. |
| ROW hwQinQSubIfDot1qTermRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.8.1.5 | RowStatus | read-create | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfDot1qTermTable pointing to the row ,the agent must also destroy the corresponding entries in hwQinQSubIfDot1qTermTable. |
| hwQinQSubIfDot1qTermStatTable | 1.3.6.1.4.1.2011.5.25.116.2.9 | not-accessible | When a sub interface configured Dot1q-termination, hwQinQSubIfDot1qTermStatTable used to statistic total number of the out packets and in packets. | |
| hwQinQSubIfDot1qTermStatEntry | 1.3.6.1.4.1.2011.5.25.116.2.9.1 | not-accessible | The entry of an interface configured Dot1q-termination function. | |
| NUM hwQinQSubIfDot1qTermStatIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.9.1.1 | InterfaceIndex | not-accessible | Index number of the Dot1q-termination interface. |
| VLA hwQinQSubIfDot1qTermStatCEVlan | 1.3.6.1.4.1.2011.5.25.116.2.9.1.2 | VlanId | not-accessible | Inner vlan in packets which input the Dot1q-termination sub interface, used to indicate the packets as an index. |
| I32 hwQinQSubIfDot1qTermStatGroupId | 1.3.6.1.4.1.2011.5.25.116.2.9.1.3 | Integer32 | read-only | The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled. |
| C64 hwQinQSubIfDot1qTermStatOutPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.4 | Counter64 | read-only | Total number of out packets of the sub interface. |
| C64 hwQinQSubIfDot1qTermStatOutBytes | 1.3.6.1.4.1.2011.5.25.116.2.9.1.5 | Counter64 | read-only | Total number of out bytes of the sub interface. |
| C64 hwQinQSubIfDot1qTermStatInPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.6 | Counter64 | read-only | Total number of in packets of the sub interface. |
| C64 hwQinQSubIfDot1qTermStatInBytes | 1.3.6.1.4.1.2011.5.25.116.2.9.1.7 | Counter64 | read-only | Total number of in bytes of the sub interface. |
| C64 hwQinQSubIfDot1qTermStatOutBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.8 | Counter64 | read-only | Total number of broadcast packets transmitted out of the sub interface. |
| C64 hwQinQSubIfDot1qTermStatInBdPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.9 | Counter64 | read-only | Total number of broadcast packets received from the sub interface. |
| C64 hwQinQSubIfDot1qTermStatOutMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.10 | Counter64 | read-only | Total number of multicast packets transmitted out of the sub interface. |
| C64 hwQinQSubIfDot1qTermStatInMuPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.11 | Counter64 | read-only | Total number of multicast packets received from the sub interface. |
| C64 hwQinQSubIfDot1qTermStatOutUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.12 | Counter64 | read-only | Total number of unicast packets transmitted out of the sub interface. |
| C64 hwQinQSubIfDot1qTermStatInUniPackets | 1.3.6.1.4.1.2011.5.25.116.2.9.1.13 | Counter64 | read-only | Total number of unicast packets received from the sub interface. |
| hwQinQModeCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.10 | not-accessible | The table contains mode type and ethernet encapsulation type. | |
| hwQinQModeCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.10.1 | not-accessible | The mode type and ethernet encapsulation type of an interface entry. | |
| NUM hwQinQModeCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.10.1.1 | InterfaceIndex | not-accessible | Index number of the interface. |
| INT hwQinQModeCfgMode | 1.3.6.1.4.1.2011.5.25.116.2.10.1.2 | INTEGER | read-write | Mode type of the interface. |
| U32 hwQinQEtherType | 1.3.6.1.4.1.2011.5.25.116.2.10.1.3 | Unsigned32 | read-write | The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ. |
| U32 hwQinQCeEtherType | 1.3.6.1.4.1.2011.5.25.116.2.10.1.4 | Unsigned32 | read-write | The value of tag type is encapsulated in the head of the ethernet frame to distinguish the encapsulated mode between the 802.1Q and QinQ. |
| hwQinQCtrlVlanCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.11 | not-accessible | The control-vlan id and control-vlan's attributes can be configured in sub interface. You must designate control-vlan as QinQ or Dot1q before configuring QinQ-termination function or Dot1q-termination function. | |
| hwQinQCtrlVlanCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.11.1 | not-accessible | The Control-vlan configuration entry. | |
| NUM hwQinQCtrlVlanCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.11.1.1 | InterfaceIndex | not-accessible | Index number of the sub interface. |
| VLA hwQinQCtrlVlan | 1.3.6.1.4.1.2011.5.25.116.2.11.1.2 | VlanId | read-create | Control-Vlan id. |
| INT hwQinQSubIfType | 1.3.6.1.4.1.2011.5.25.116.2.11.1.3 | INTEGER | read-create | The type of sub interface. |
| INT hwQinQCtrlVlanFlag | 1.3.6.1.4.1.2011.5.25.116.2.11.1.4 | INTEGER | read-create | The service type of the sub interface, by setting hwQinQCtrlVlanFlag to the value (rtprotocolenable), the route-protocol attribute enabled; and by setting hwQinQCtrlVlanFlag to the value (localswitch), the localswitch attribute enabled, which means two tags of packets will be pruned. So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQCtrlVlanFlag as localswitch. |
| ROW hwQinQCtrlVlanRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.11.1.5 | RowStatus | read-create | This table can be created and deleted. |
| ENA hwQinQFlexibleFlag | 1.3.6.1.4.1.2011.5.25.116.2.11.1.6 | EnabledStatus | read-create | The service type of the sub interface, by setting hwQinQFlexibleFlag to the value (flexibleenable), the flexible attribute enabled; So if you set hwQinQSubIfType to be dot1q type, you can not specify hwQinQFlexibleFlag as flexibleenable. |
| hwQinQGroupCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.12 | not-accessible | The group-management id and group's attributes can be configured in sub interface. | |
| hwQinQGroupCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.12.1 | not-accessible | Group configuration entry. | |
| NUM hwQinQGroupCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.12.1.1 | InterfaceIndex | not-accessible | Index number of the interface. |
| I32 hwQinQGroupId | 1.3.6.1.4.1.2011.5.25.116.2.12.1.2 | Integer32 | not-accessible | Group-management id. |
| INT hwQinQGroupType | 1.3.6.1.4.1.2011.5.25.116.2.12.1.3 | INTEGER | read-create | The type of the group. |
| ENA hwQinQGroupStat | 1.3.6.1.4.1.2011.5.25.116.2.12.1.4 | EnabledStatus | read-create | Whether the statistic function is enabled. |
| ROW hwQinQGroupRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.12.1.5 | RowStatus | read-create | This table can be created and deleted. |
| hwQinQAsymmetryCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.13 | not-accessible | The table to configure asymmetry attribution of the interface. | |
| hwQinQAsymmetryCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.13.1 | not-accessible | The entry of the asymmetry configure table. | |
| NUM hwQinQAsymmetryCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.13.1.1 | InterfaceIndex | not-accessible | Index number of the QinQ-termination interface. |
| INT hwQinQSubIfAsymmetry | 1.3.6.1.4.1.2011.5.25.116.2.13.1.2 | INTEGER | read-write | The asymmetry attribution of the QinQ-termination interface. |
| ENA hwQinQAsymmetryUserMode | 1.3.6.1.4.1.2011.5.25.116.2.13.1.3 | EnabledStatus | read-write | The user mode attribute of the QinQ-termination sub interface. |
| hwQinQRemarkCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.14 | not-accessible | Interface remark config. | |
| hwQinQRemarkCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.14.1 | not-accessible | The entry of the interface remark configuration table. | |
| NUM hwQinQRemarkCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.14.1.1 | InterfaceIndex | not-accessible | Index number of the sub interface, which should configure QinQ-termination function first. |
| INT hwQinQPriorityRemark | 1.3.6.1.4.1.2011.5.25.116.2.14.1.2 | INTEGER | read-write | The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag. |
| hwBpduTunnelIngressTable | 1.3.6.1.4.1.2011.5.25.116.2.15 | not-accessible | The table of bpdu tunnel ingress. | |
| hwBpduTunnelIngressEntry | 1.3.6.1.4.1.2011.5.25.116.2.15.1 | not-accessible | The entry of of bpdu tunnel ingress. | |
| I32 hwBpduTunnelIngressPortIndex | 1.3.6.1.4.1.2011.5.25.116.2.15.1.1 | Integer32 | not-accessible | Port index in interface. |
| BPD hwBpduTunnelBpduIngressMacIndex | 1.3.6.1.4.1.2011.5.25.116.2.15.1.2 | BpduIndex | not-accessible | bpdu mac address list BPDU Dmac protocol 01-80-C2-00-00-00 stp01 01-80-C2-00-00-01 pauseFrame 01-80-C2-00-00-02 reserved02 01-80-C2-00-00-03 reserved03 01-80-C2-00-00-04 reserved04 01-80-C2-00-00-05 reserved05 01-80-C2-00-00-06 reserved06 01-80-C2-00-00-07 reserved07 01-80-C2-00-00-08 stp02 01-80-C2-00-00-09 reserved08 01-80-C2-00-00-0a hgmp 01-80-C2-00-00-0b reserved09 01-80-C2-00-00-0c reserved10 01-80-C2-00-00-0d reserved11 01-80-C2-00-00-0e reserved12 01-80-C2-00-00-0f reserved13 01-80-C2-00-00-10 reserved14 01-80-C2-00-00-11 reserved15 01-80-C2-00-00-12 reserved16 01-80-C2-00-00-13 reserved17 01-80-C2-00-00-14 isisLevel01 01-80-C2-00-00-15 isisLevel02 01-80-C2-00-00-16 reserved18 01-80-C2-00-00-17 reserved19 01-80-C2-00-00-18 reserved20 01-80-C2-00-00-19 reserved21 01-80-C2-00-00-1a reserved22 01-80-C2-00-00-1b reserved23 01-80-C2-00-00-1c reserved24 01-80-C2-00-00-1d reserved25 01-80-C2-00-00-1e reserved26 01-80-C2-00-00-1f reserved27 01-80-C2-00-00-20 gmrp 01-80-C2-00-00-21 gvrp 01-80-C2-00-00-22 reserved28 01-80-C2-00-00-23 reserved29 01-80-C2-00-00-24 reserved30 01-80-C2-00-00-25 reserved31 01-80-C2-00-00-26 reserved32 01-80-C2-00-00-27 reserved33 01-80-C2-00-00-28 reserved34 01-80-C2-00-00-29 reserved35 01-80-C2-00-00-2a reserved36 01-80-C2-00-00-2b reserved37 01-80-C2-00-00-2c reserved38 01-80-C2-00-00-2d reserved39 01-80-C2-00-00-2e reserved40 01-80-C2-00-00-2f reserved41 |
| MAC hwBpduTunnelIngressAddress | 1.3.6.1.4.1.2011.5.25.116.2.15.1.3 | MacAddress | read-create | Group mac address. |
| ROW hwBpduTunnelIngressRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.15.1.4 | RowStatus | read-create | Bpdu tunnek ingress row status. |
| hwBpduTunnelEgressTable | 1.3.6.1.4.1.2011.5.25.116.2.16 | not-accessible | The table of bpdu tunnel egress. | |
| hwBpduTunnelEgressEntry | 1.3.6.1.4.1.2011.5.25.116.2.16.1 | not-accessible | The entry of bpdu tunnel egress. | |
| I32 hwBpduTunnelEgressPortIndex | 1.3.6.1.4.1.2011.5.25.116.2.16.1.1 | Integer32 | not-accessible | Port index in interface. |
| BPD hwBpduTunnelBpduEgressMacIndex | 1.3.6.1.4.1.2011.5.25.116.2.16.1.2 | BpduIndex | not-accessible | Bpdu MAC address list BPDU DMAC protocol 01-80-C2-00-00-00 stp01 01-80-C2-00-00-01 pauseFrame 01-80-C2-00-00-02 reserved02 01-80-C2-00-00-03 reserved03 01-80-C2-00-00-04 reserved04 01-80-C2-00-00-05 reserved05 01-80-C2-00-00-06 reserved06 01-80-C2-00-00-07 reserved07 01-80-C2-00-00-08 stp02 01-80-C2-00-00-09 reserved08 01-80-C2-00-00-0a hgmp 01-80-C2-00-00-0b reserved09 01-80-C2-00-00-0c reserved10 01-80-C2-00-00-0d reserved11 01-80-C2-00-00-0e reserved12 01-80-C2-00-00-0f reserved13 01-80-C2-00-00-10 reserved14 01-80-C2-00-00-11 reserved15 01-80-C2-00-00-12 reserved16 01-80-C2-00-00-13 reserved17 01-80-C2-00-00-14 isisLevel01 01-80-C2-00-00-15 isisLevel02 01-80-C2-00-00-16 reserved18 01-80-C2-00-00-17 reserved19 01-80-C2-00-00-18 reserved20 01-80-C2-00-00-19 reserved21 01-80-C2-00-00-1a reserved22 01-80-C2-00-00-1b reserved23 01-80-C2-00-00-1c reserved24 01-80-C2-00-00-1d reserved25 01-80-C2-00-00-1e reserved26 01-80-C2-00-00-1f reserved27 01-80-C2-00-00-20 gmrp 01-80-C2-00-00-21 gvrp 01-80-C2-00-00-22 reserved28 01-80-C2-00-00-23 reserved29 01-80-C2-00-00-24 reserved30 01-80-C2-00-00-25 reserved31 01-80-C2-00-00-26 reserved32 01-80-C2-00-00-27 reserved33 01-80-C2-00-00-28 reserved34 01-80-C2-00-00-29 reserved35 01-80-C2-00-00-2a reserved36 01-80-C2-00-00-2b reserved37 01-80-C2-00-00-2c reserved38 01-80-C2-00-00-2d reserved39 01-80-C2-00-00-2e reserved40 01-80-C2-00-00-2f reserved41. |
| MAC hwBpduTunnelEgressAddress | 1.3.6.1.4.1.2011.5.25.116.2.16.1.3 | MacAddress | read-create | Group mac address. |
| ROW hwBpduTunnelEgressRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.16.1.4 | RowStatus | read-create | Row Status. |
| hwBpduTunnelVlanTable | 1.3.6.1.4.1.2011.5.25.116.2.17 | not-accessible | The table of port bpdu tunnel. | |
| hwBpduTunnelVlanEntry | 1.3.6.1.4.1.2011.5.25.116.2.17.1 | not-accessible | The entry of port bpdu tunnel vlan. | |
| I32 hwBpduTunnelPortIndex | 1.3.6.1.4.1.2011.5.25.116.2.17.1.1 | Integer32 | not-accessible | Port index in interface. |
| INT hwBpduTunnelEnable | 1.3.6.1.4.1.2011.5.25.116.2.17.1.2 | INTEGER | read-write | Bpdu tunnel enable. |
| VLA hwBpduTunnelVlanListLow | 1.3.6.1.4.1.2011.5.25.116.2.17.1.3 | VlanList | read-write | Vlan bpdu tunnel in port. |
| VLA hwBpduTunnelVlanListHigh | 1.3.6.1.4.1.2011.5.25.116.2.17.1.4 | VlanList | read-write | Vlan bpdu tunnel in port. |
| hwBpduTunnelTable | 1.3.6.1.4.1.2011.5.25.116.2.18 | not-accessible | The table of bpdu tunnel. | |
| hwBpduTunnelEntry | 1.3.6.1.4.1.2011.5.25.116.2.18.1 | not-accessible | The entry of of bpdu tunnel. | |
| BPD hwBpduTunnelBpduIndex | 1.3.6.1.4.1.2011.5.25.116.2.18.1.1 | BpduIndex | not-accessible | Bpdu mac address list BPDU Dmac protocol 01-80-C2-00-00-00 stp01 (1) 01-80-C2-00-00-01 pauseFrame (2) 01-80-C2-00-00-02 reserved02 (3) 01-80-C2-00-00-03 reserved03 (4) 01-80-C2-00-00-04 reserved04 (5) 01-80-C2-00-00-05 reserved05 (6) 01-80-C2-00-00-06 reserved06 (7) 01-80-C2-00-00-07 reserved07 (8) 01-80-C2-00-00-08 stp02 (9) 01-80-C2-00-00-09 reserved08 (10) 01-80-C2-00-00-0a hgmp (11) 01-80-C2-00-00-0b reserved09 (12) 01-80-C2-00-00-0c reserved10 (13) 01-80-C2-00-00-0d reserved11 (14) 01-80-C2-00-00-0e reserved12 (15) 01-80-C2-00-00-0f reserved13 (16) 01-80-C2-00-00-10 reserved14 (17) 01-80-C2-00-00-11 reserved15 (18) 01-80-C2-00-00-12 reserved16 (19) 01-80-C2-00-00-13 reserved17 (20) 01-80-C2-00-00-14 isisLevel01 (21) 01-80-C2-00-00-15 isisLevel02 (22) 01-80-C2-00-00-16 reserved18 (23) 01-80-C2-00-00-17 reserved19 (24) 01-80-C2-00-00-18 reserved20 (25) 01-80-C2-00-00-19 reserved21 (26) 01-80-C2-00-00-1a reserved22 (27) 01-80-C2-00-00-1b reserved23 (28) 01-80-C2-00-00-1c reserved24 (29) 01-80-C2-00-00-1d reserved25 (30) 01-80-C2-00-00-1e reserved26 (31) 01-80-C2-00-00-1f reserved27 (32) 01-80-C2-00-00-20 gmrp (33) 01-80-C2-00-00-21 gvrp (34) 01-80-C2-00-00-22 reserved28 (35) 01-80-C2-00-00-23 reserved29 (36) 01-80-C2-00-00-24 reserved30 (37) 01-80-C2-00-00-25 reserved31 (38) 01-80-C2-00-00-26 reserved32 (39) 01-80-C2-00-00-27 reserved33 (40) 01-80-C2-00-00-28 reserved34 (41) 01-80-C2-00-00-29 reserved35 (42) 01-80-C2-00-00-2a reserved36 (43) 01-80-C2-00-00-2b reserved37 (44) 01-80-C2-00-00-2c reserved38 (45) 01-80-C2-00-00-2d reserved39 (46) 01-80-C2-00-00-2e reserved40 (47) 01-80-C2-00-00-2f reserved41 (48) 01-80-C2-00-00-02 lacp (49) 01-00-0C-CC-CC-CC cdp (50) 01-00-0C-CC-CC-CC pagp (51) 01-00-0C-CC-CC-CC udld (52) 01-00-0C-CC-CC-CC vtp (53) . |
| INT hwBpduTunnelBpduEnable | 1.3.6.1.4.1.2011.5.25.116.2.18.1.2 | INTEGER | read-write | Bpdu tunnel enable or disable. |
| MAC hwBpduTunnelMultiAddress | 1.3.6.1.4.1.2011.5.25.116.2.18.1.3 | MacAddress | read-create | Group MAC address. |
| ROW hwBpduTunnelRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.18.1.4 | RowStatus | read-create | Row Status. |
| hwQinQSwapCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.19 | not-accessible | This table describes the vlan swap configurations of interfaces. | |
| hwQinQSwapCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.19.1 | not-accessible | An entry is created for each active ethernet type interface in the device and deleted when the interface been not exist. | |
| NUM hwQinQSwapCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.19.1.1 | InterfaceIndex | not-accessible | Index number of the interface. |
| ENA hwQinQSwapCfgFlag | 1.3.6.1.4.1.2011.5.25.116.2.19.1.2 | EnabledStatus | read-write | QinQ swap flag of the interface, which indicates whether to swap the two vlan tags or not when the interface receives a packet with two 802.1q tags. |
| hwQinQSubIfMapTable | 1.3.6.1.4.1.2011.5.25.116.2.20 | not-accessible | The table is used to configure QinQ-mapping function in sub interface, then packets transmitted from this sub interface input with one or two tags will be mapped to other tag or tags. | |
| hwQinQSubIfMapEntry | 1.3.6.1.4.1.2011.5.25.116.2.20.1 | not-accessible | The entry of an interface enabled the QinQ-Map function. | |
| NUM hwQinQSubIfMapIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.20.1.1 | InterfaceIndex | not-accessible | Index number of the QinQ-Map interface. |
| I32 hwQinQSubIfPEVlan | 1.3.6.1.4.1.2011.5.25.116.2.20.1.2 | Integer32 | not-accessible | Outer vlan id of the packets which have two tags before being Mapped. |
| I32 hwQinQSubIfCEVlanStart | 1.3.6.1.4.1.2011.5.25.116.2.20.1.3 | Integer32 | not-accessible | Inner start vlan id of the packets which have two tags before being Mapped. |
| I32 hwQinQSubIfCEVlanEnd | 1.3.6.1.4.1.2011.5.25.116.2.20.1.4 | Integer32 | read-create | Inner end vlan id of the packets which have two tags before being Mapped. |
| I32 hwQinQSubIfPEVlanMap | 1.3.6.1.4.1.2011.5.25.116.2.20.1.5 | Integer32 | read-create | Outer vlan id of the packets which have two tags after being Mapped. |
| U32 hwQinQSubIfPEEtherType | 1.3.6.1.4.1.2011.5.25.116.2.20.1.6 | Unsigned32 | read-create | EtherType of Pe Mapped. |
| I32 hwQinQSubIfCEVlanMap | 1.3.6.1.4.1.2011.5.25.116.2.20.1.7 | Integer32 | read-create | Inner vlan id of the packets which have two tags after being Mapped. |
| U32 hwQinQSubIfCEEtherType | 1.3.6.1.4.1.2011.5.25.116.2.20.1.8 | Unsigned32 | read-create | EtherType of Ce Mapped. |
| I32 hwQinQSubIfMapGroupId | 1.3.6.1.4.1.2011.5.25.116.2.20.1.9 | Integer32 | read-create | Group-management id. |
| INT hwQinQSubIfMapPe8021p | 1.3.6.1.4.1.2011.5.25.116.2.20.1.10 | INTEGER | read-write | The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag. |
| INT hwQinQSubIfMapCe8021p | 1.3.6.1.4.1.2011.5.25.116.2.20.1.11 | INTEGER | read-write | The service policy map to set the 802.1P bits. By default(pevid), copy the P bits that were in the outer PE VLAN tag to the trunk VLAN tag, by setting object to (cevid), copy the P bits that were in inner CE VALN tag to the trunk VLAN tag. |
| ENA hwQinQSubIfMapCetoPeFlag | 1.3.6.1.4.1.2011.5.25.116.2.20.1.12 | EnabledStatus | read-create | The service type of the sub interface, by setting MapCetoPeFlag to the value (CetoPeenable), the 8021p CetoPeenable attribute enabled. |
| ROW hwQinQSubIfMapRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.20.1.13 | RowStatus | read-create | Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfMapTable pointing to the row, the agent must also destroy the corresponding entries in hwQinQSubIfMapTable. |
| hwQinQStackingVlanCfgTable | 1.3.6.1.4.1.2011.5.25.116.2.21 | not-accessible | QinQ Stacking Vlan configuration table. | |
| hwQinQStackingVlanCfgEntry | 1.3.6.1.4.1.2011.5.25.116.2.21.1 | not-accessible | This object indicates the configuration table for QinQ Stacking Vlan. | |
| NUM hwQinQStackingVlanCfgIfIndex | 1.3.6.1.4.1.2011.5.25.116.2.21.1.1 | InterfaceIndex | not-accessible | This object indicates the Index number of the vlanif interface. |
| VLA hwQinQStackingVlanCfgVlanId | 1.3.6.1.4.1.2011.5.25.116.2.21.1.2 | VlanId | read-create | This object indicates the outer vlan id for QinQ Stacking Vlan. |
| ROW hwQinQStackingVlanCfgRowStatus | 1.3.6.1.4.1.2011.5.25.116.2.21.1.50 | RowStatus | read-create | This object indicates the RowStatus of hwQinQStackingVlanTable. |
| hwQinQConformance | 1.3.6.1.4.1.2011.5.25.116.3 | |||
| hwQinQGroups | 1.3.6.1.4.1.2011.5.25.116.3.1 | |||
| hwQinQSystemBaseGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.1 | A collection of objects providing device level control and status information for the system. | ||
| hwQinQBpduTunnelGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.2 | A collection of objects providing device level control and status information for the interface. | ||
| hwQinQSubIfVlanStackingGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.3 | A collection of objects providing device level control and status information for the sub interface. | ||
| hwQinQSubIfStackingStatGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.4 | A collection of objects providing device level control and status information for the sub interface. | ||
| hwQinQSubIfTermGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.5 | A collection of objects providing device level control and status information for the sub interface. | ||
| hwQinQSubIfTermStatGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.6 | A collection of objects providing device level control and status information for the sub interface. | ||
| hwQinQStaticARPCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.7 | A collection of items of static ARP table. | ||
| hwQinQStaticMACCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.8 | A collection of items of static MAC table. | ||
| hwQinQSubIfDot1qTermGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.9 | A collection of items of Dot1q-termination table. | ||
| hwQinQSubIfDot1qTermStatGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.10 | A collection of items of Dot1q-termination statistic table. | ||
| hwQinQModeCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.11 | A collection of items of Mode config table. | ||
| hwQinQCtrlVlanCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.12 | A collection of items of Control vlan table. | ||
| hwQinQGroupCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.13 | A collection of items of group table. | ||
| hwQinQAsymmetryCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.14 | A collection of items of asymmetry config table. | ||
| hwQinQRemarkCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.15 | A collection of items of Mode config table. | ||
| hwBpduTunnelIngressGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.16 | A collection of items of Group Mac table. | ||
| hwBpduTunnelEgressGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.17 | A collection of items of Group Mac table. | ||
| hwBpduTunnelVlanGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.18 | A collection of items of Mode port bpdu tunnel table. | ||
| hwBpduTunnelGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.19 | A collection of items of bpdu tunnel mac table. | ||
| hwQinQSwapCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.20 | A collection of items of Swap config table. | ||
| hwQinQSubIfMapGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.21 | A collection of objects providing device level control and status information for the sub interface. | ||
| hwQinQStackingVlanCfgGroup | 1.3.6.1.4.1.2011.5.25.116.3.1.22 | A collection of items of QinQ Stacking Vlan config table. | ||
| hwQinQCompliances | 1.3.6.1.4.1.2011.5.25.116.3.2 | |||
| hwQinQCompliance | 1.3.6.1.4.1.2011.5.25.116.3.2.1 | The core compliance statement for all implementations. |
RFC description
Huawei vendor-private MIB; manages QinQ (802.1ad stacked VLAN) configuration and monitoring objects for Huawei network devices.
Start monitoring Huawei enterprise/carrier switch (802.1ad QinQ VLAN stacking) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.