GSWB-MIB

All MIBs › GSWB-MIB

Category: Technology: Switching/L2

Description: Generic switch blade MIB for managing modular switch chassis blade modules and associated port configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GSWB-MIB?

GSWB-MIB is a generic switch-blade MIB used for managing modular switch chassis blade modules and their associated port configuration in chassis-based Ethernet switching platforms. No module description or concrete object list was available for this module, so the specific data model cannot be confirmed, but MIBs of this class generally expose blade inventory, slot occupancy, and port-to-blade mapping within a chassis. Such a MIB would typically be used to monitor blade hardware status per slot (present, up, faulted, or missing) and configuration consistency across ports, which are core hardware-health indicators for modular switches, though it likely lacks native CPU/memory/temperature telemetry, which normally comes from a companion entity or environmental MIB. It likely complements the standard ENTITY-MIB and IF-MIB for physical inventory and interface indexing. Typical deployment is on modular, chassis-based Ethernet switches where individual line-card blades can be inserted, removed, or fail independently. Engineers can download the GSWB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GSWB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fujitsu modular/chassis-based Ethernet switch (blade/slot management) — Enterprise OID 211 resolves to Fujitsu, previously left as a generic unnamed 'modular/chassis-based Ethernet switch'.

Monitoring Examples

No sample objects were supplied for this MIB, so specific table or object names cannot be cited with confidence. Based on the module name and short description, a real deployment would likely expose a blade table indexed by slot number with columns for blade type and operational status, which an administrator would poll to detect a blade transitioning to a faulted or missing state after a chassis card failure, but this cannot be confirmed from the available source.

What Can Be Monitored

blade module presence per slot
blade operational status
port-to-blade mapping

Imported Objects

From BRIDGE-MIB

MacAddress

From Q-BRIDGE-MIB

PortList

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
TimeTicks
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
fujitsu	1.3.6.1.4.1.211
products	1.3.6.1.4.1.211.1
iaServer	1.3.6.1.4.1.211.1.31
primequest	1.3.6.1.4.1.211.1.31.1
switch	1.3.6.1.4.1.211.1.31.1.3
gswb	1.3.6.1.4.1.211.1.31.1.3.1
fujitsu_gswbProd	1.3.6.1.4.1.211.1.31.1.3.1.1
swProperty	1.3.6.1.4.1.211.1.31.1.3.1.1.1
swModule	1.3.6.1.4.1.211.1.31.1.3.1.1.1.1
NTF addressTableFull	1.3.6.1.4.1.211.1.31.1.3.1.1.1.1.0.1			The trap is sent whenever the address table is full.
agentConfigInfo	1.3.6.1.4.1.211.1.31.1.3.1.2
agentBasicInfo	1.3.6.1.4.1.211.1.31.1.3.1.2.1
STR agentRuntimeSwVersion	1.3.6.1.4.1.211.1.31.1.3.1.2.1.1	DisplayString	read-only	This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion would be 'Ver. 1.0'
swDevPackage	1.3.6.1.4.1.211.1.31.1.3.1.3
swDevInfo	1.3.6.1.4.1.211.1.31.1.3.1.3.1
TIK swDevInfoSystemUpTime	1.3.6.1.4.1.211.1.31.1.3.1.3.1.1	TimeTicks	read-only	The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in units of seconds.
OCT swDevInfoSystemLedStatus	1.3.6.1.4.1.211.1.31.1.3.1.3.1.2	OCTET STRING	read-only	other(1), Speed010M(2), Speed100M(3), Speed001G(4), Speed010G(5), NoExisting(129), NotLink(130), PortDisable(131), Link(132), Active(133)
swPortPackage	1.3.6.1.4.1.211.1.31.1.3.1.4
swPortInfoTable	1.3.6.1.4.1.211.1.31.1.3.1.4.1		not-accessible	A table that contains information about every port.
swPortInfoEntry	1.3.6.1.4.1.211.1.31.1.3.1.4.1.1		not-accessible	A list of information for each port of the device.
INT swPortInfoPortIndex	1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.1	INTEGER	read-only	This object indicates the module's port number.(1..Max port number in the module)
INT swPortInfoType	1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.2	INTEGER	read-only	This object indicates the connector type of this port.
INT swPortInfoLinkStatus	1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.3	INTEGER	read-only	This object indicates the port link status.
INT swPortInfoNwayStatus	1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.4	INTEGER	read-only	This object indicates the port speed and duplex mode.
INT swPortInfoFlowCtrlStatus	1.3.6.1.4.1.211.1.31.1.3.1.4.1.1.5	INTEGER	read-only	This object indicates the port flow control status.
swPortTrunkPackage	1.3.6.1.4.1.211.1.31.1.3.1.6
swPortTrunkTable	1.3.6.1.4.1.211.1.31.1.3.1.6.1		not-accessible	This table specifys which ports group a set of ports(up to 8) into a single logical link.
swPortTrunkEntry	1.3.6.1.4.1.211.1.31.1.3.1.6.1.1		not-accessible	A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
INT swPortTrunkIndex	1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.1	INTEGER	not-accessible	The index of logical port trunk.The device max support 7 trunk groups. The trunk group number depend on the existence of module.
STR swPortTrunkName	1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.2	DisplayString	read-only	The name of logical port trunk.
INT swPortTrunkLoadBalance	1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.3	INTEGER	read-only	other(1) src-mac(2) dst-mac(3) src-dst-mac(4) src-ip(5) dst-ip(6) src-dst-ip(7)
POR swPortTrunkMemberPorts	1.3.6.1.4.1.211.1.31.1.3.1.6.1.1.4	PortList	read-only	The members of the port trunk.
swIGMPPackage	1.3.6.1.4.1.211.1.31.1.3.1.7
INT swIGMPStatus	1.3.6.1.4.1.211.1.31.1.3.1.7.1	INTEGER	read-only	This object indicates the status of this switch. other(1) - this switch is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - IGMP funtion is disabled for this switch. enabled(3) - IGMP funtion is enabled for this switch.
INT swIGMPEnableVlanCount	1.3.6.1.4.1.211.1.31.1.3.1.7.2	INTEGER	read-only
INT swIGMPMulticastTableCount	1.3.6.1.4.1.211.1.31.1.3.1.7.3	INTEGER	read-only
swIGMPInfoTable	1.3.6.1.4.1.211.1.31.1.3.1.7.4		not-accessible	The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
swIGMPInfoEntry	1.3.6.1.4.1.211.1.31.1.3.1.7.4.1		not-accessible	Information about current IGMP query information, provided that swIGMPStatus and swIGMPQueryState of associated VLAN entry are all enabled.
VLA swIGMPInfoVid	1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.1	VlanId	not-accessible	This object indicates the Vid of associated IGMP info table entry. It follows swIGMPCtrlVid in the associated entry of IGMP control table (swIGMPCtrlTable).
CTR swIGMPInfoGeneralQueryCount	1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.2	Counter	read-only	This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.
CTR swIGMPInfoSpecificQueryCount	1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.3	Counter	read-only	This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
CTR swIGMPInfoLeaveGroupCount	1.3.6.1.4.1.211.1.31.1.3.1.7.4.1.4	Counter	read-only	This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
swIGMPTable	1.3.6.1.4.1.211.1.31.1.3.1.7.5		not-accessible	The table containing current IGMP information which captured by this device, provided that swIGMPStatus and swIGMPQueryState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swFdbFilterTable description also.
swIGMPEntry	1.3.6.1.4.1.211.1.31.1.3.1.7.5.1		not-accessible	Information about current IGMP information which captured by this device , provided that swIGMPStatus and swIGMPQueryState of associated VLAN entry are all enabled.
VLA swIGMPVid	1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.1	VlanId	not-accessible	This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
MAC swIGMPGroupMacAddr	1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.2	MacAddress	not-accessible	This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.
T/F swIGMPStaticFlag	1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.3	TruthValue	read-only
POR swIGMPPortMap	1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.4	PortList	read-only	This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port.
CTR swIGMPIpGroupReportCount	1.3.6.1.4.1.211.1.31.1.3.1.7.5.1.5	Counter	read-only	This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis. .

RFC description

Fujitsu GSWB switch MIB for port configuration, IGMP, and trunking management.

Start monitoring Fujitsu modular/chassis-based Ethernet switch (blade/slot management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GSWB-MIB

What Is GSWB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description