HPNSATAT-MIB

All MIBs › HPNSATAT-MIB

Category: Hardware Inventory

Description: Monitors HP NetServer Administrator storage and system status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPNSATAT-MIB?

HPNSATAT-MIB is part of the legacy HP NetServer Agent (Test/Administrator Tool) suite and covers storage and system self-test status on HP ProLiant/NetServer servers. Its sample objects show it exposes drive self-test (DST) timing data, indicating it tracks when disk self-diagnostic routines started, completed, and finished on attached drives. Its monitoring purpose is squarely hardware status: confirming that a drive self-test ran and completed, and using the timestamps to detect drives that never finished a scheduled diagnostic or took abnormally long, which can be an early indicator of failing storage media. As a legacy HP agent MIB it likely coexists with sibling modules such as HPNSAASR-MIB (RAID redundancy) and HPNSATRAP-MIB (hardware alert traps) on the same device. It would have been deployed on legacy HP NetServer/ProLiant servers running HP's SNMP agent for proactive disk health monitoring. Network engineers evaluating or troubleshooting this functionality can download the HPNSATAT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPNSATAT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP NetServer/ProLiant servers

Monitoring Examples

An administrator would poll hpTatAgtDriveDstStartTime and hpTatAgtDriveDstEndTime to determine how long a drive self-test (DST) took to run, and check hpTatAgtDriveDstCompletionTime to confirm the test actually finished. If the completion time is missing or the elapsed duration between start and end is unusually long, that can indicate a drive experiencing latent read errors during self-test, warranting proactive replacement before an outright failure.

What Can Be Monitored

drive self-test start time
drive self-test end time
drive self-test completion time/status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hp	1.3.6.1.4.1.11
nm	1.3.6.1.4.1.11.2
hpnsa	1.3.6.1.4.1.11.2.23
hpTatAgt	1.3.6.1.4.1.11.2.23.32
hpTatAgtMibRev	1.3.6.1.4.1.11.2.23.32.1
INT hpTatAgtVersion	1.3.6.1.4.1.11.2.23.32.1.1	INTEGER	read-only	The current version (major) number of the SNMP agent.
INT hpTatAgtRevision	1.3.6.1.4.1.11.2.23.32.1.2	INTEGER	read-only	The current revision (minor) number of the SNMP agent.
INT hpTatAgtMibVersion	1.3.6.1.4.1.11.2.23.32.1.3	INTEGER	read-only	The current version (major) number of the SNMP agent's MIB.
INT hpTatAgtMibRevision	1.3.6.1.4.1.11.2.23.32.1.4	INTEGER	read-only	The current revision (minor) number of the SNMP agent's MIB.
hpTatAgtAdapterInfo	1.3.6.1.4.1.11.2.23.32.2
INT hpTatAgtnAdapters	1.3.6.1.4.1.11.2.23.32.2.1	INTEGER	read-only	The number of Adapters present on the system.
hpTatAgtAdapterTable	1.3.6.1.4.1.11.2.23.32.2.2		not-accessible	A list of the Adapters present on the system.
hpTatAgtAdapterEntry	1.3.6.1.4.1.11.2.23.32.2.2.1		not-accessible
INT hpTatAgtAdapterIndex	1.3.6.1.4.1.11.2.23.32.2.2.1.1	INTEGER	read-only	Index number of this adapter in the table (1 to n).
INT hpTatAgtAdapterPort	1.3.6.1.4.1.11.2.23.32.2.2.1.2	INTEGER	read-only	The port number for the adapter/controller
STR hpTatAgtAdapterName	1.3.6.1.4.1.11.2.23.32.2.2.1.3	DisplayString	read-only	The manufacturer's product name for the controller.
STR hpTatAgtAdapterMfg	1.3.6.1.4.1.11.2.23.32.2.2.1.4	DisplayString	read-only	A string identifying the manufacturer (or ??? if unknown).
STR hpTatAgtDriverVersion	1.3.6.1.4.1.11.2.23.32.2.2.1.5	DisplayString	read-only	The version string obtained from the device driver file.
INT hpTatAgtAdapterClass	1.3.6.1.4.1.11.2.23.32.2.2.1.6	INTEGER	read-only	Adapter category
hpTatAgtDriveInfo	1.3.6.1.4.1.11.2.23.32.3
INT hpTatAgtnDrives	1.3.6.1.4.1.11.2.23.32.3.1	INTEGER	read-only	The number of Drives present on the system.
hpTatAgtDriveTable	1.3.6.1.4.1.11.2.23.32.3.2		not-accessible	A list of the Drives present on the system.
hpTatAgtDriveEntry	1.3.6.1.4.1.11.2.23.32.3.2.1		not-accessible
INT hpTatAgtDriveIndex	1.3.6.1.4.1.11.2.23.32.3.2.1.1	INTEGER	read-only	Index number of this Drive in the table (1 to n).
INT hpTatAgtDriveAdapter	1.3.6.1.4.1.11.2.23.32.3.2.1.2	INTEGER	read-only	Adapter (SCSI port) number that this drive is connected to.
INT hpTatAgtDriveChannel	1.3.6.1.4.1.11.2.23.32.3.2.1.3	INTEGER	read-only	Channel number on the adapter that this drive is connected to.
INT hpTatAgtDriveTargetID	1.3.6.1.4.1.11.2.23.32.3.2.1.4	INTEGER	read-write	This drive's SCSI target ID.
STR hpTatAgtDriveDriverVersion	1.3.6.1.4.1.11.2.23.32.3.2.1.5	DisplayString	read-only	Manufacturer's product revision string for the drive.
STR hpTatAgtDriveProdRev	1.3.6.1.4.1.11.2.23.32.3.2.1.6	DisplayString	read-only	Manufacturer's product revision string for the drive.
STR hpTatAgtDriveDateCode	1.3.6.1.4.1.11.2.23.32.3.2.1.7	DisplayString	read-only	Manufacturer's drive date code (Seagate drives).
STR hpTatAgtDriveSerialNumber	1.3.6.1.4.1.11.2.23.32.3.2.1.8	DisplayString	read-only	Manufacturer's Drive serial number
STR hpTatAgtDriveHPProductID	1.3.6.1.4.1.11.2.23.32.3.2.1.9	DisplayString	read-only	HP's drive product identifier
INT hpTatAgtDriveLetters	1.3.6.1.4.1.11.2.23.32.3.2.1.10	INTEGER	read-only	OS drive letters assigned to volumes on the drive.
INT hpTatAgtDriveRaidLevel	1.3.6.1.4.1.11.2.23.32.3.2.1.11	INTEGER	read-only	RAID level if appicable.
INT hpTatAgtDriveWasTattooed	1.3.6.1.4.1.11.2.23.32.3.2.1.12	INTEGER	read-write	Whether the drive was ever located by TopTools before.
INT hpTatAgtDriveDstAvail	1.3.6.1.4.1.11.2.23.32.3.2.1.13	INTEGER	read-only	Is the DST (page 10h) supported.
INT hpTatAgtDriveDstPercent	1.3.6.1.4.1.11.2.23.32.3.2.1.14	INTEGER	read-only	The percentage of DST progress
INT hpTatAgtDriveDstStart	1.3.6.1.4.1.11.2.23.32.3.2.1.15	INTEGER	read-write	Start or abort DST.
INT hpTatAgtDriveDstResults	1.3.6.1.4.1.11.2.23.32.3.2.1.16	INTEGER	read-only	DST result
INT hpTatAgtDriveDstCompletionTime	1.3.6.1.4.1.11.2.23.32.3.2.1.17	INTEGER	read-only	Estimation for extended test time in seconds.
STR hpTatAgtDriveDstStartTime	1.3.6.1.4.1.11.2.23.32.3.2.1.18	DisplayString	read-only	The last time DST starts.
STR hpTatAgtDriveDstEndTime	1.3.6.1.4.1.11.2.23.32.3.2.1.19	DisplayString	read-only	The last time DST ends
hpTatAgtRefreshDrvTbl	1.3.6.1.4.1.11.2.23.32.4
INT hpTatAgtnRefreshDriveTbl	1.3.6.1.4.1.11.2.23.32.4.1	INTEGER	read-write	Set to regeneration the Drive table.
INT hpTatAgtnRefreshStatus	1.3.6.1.4.1.11.2.23.32.4.2	INTEGER	read-only	The status of drive table regeneration
hpTatAgtStatusSev	1.3.6.1.4.1.11.2.23.32.5
INT hpTatAgtOverallStatusSeverity	1.3.6.1.4.1.11.2.23.32.5.1	INTEGER	read-write	Overall status severity.

RFC description

NetServer Tattoo agent for drive and adapter information monitoring via tattoo firmware.

Start monitoring HP NetServer/ProLiant server (legacy drive self-test status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPNSATAT-MIB

What Is HPNSATAT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description