All MIBs › C-PRODUCT-MCPU-MIB
Category: Hardware Inventory
Description: Monitors and manages the main CPU module parameters on C-PRODUCT chassis systems.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is C-PRODUCT-MCPU-MIB?
C-PRODUCT-MCPU-MIB is a proprietary MIB for the Main CPU (MCPU) module of a chassis-based "C-PRODUCT" access/multiplexer system, whose object naming (virtual circuits, cell rate shaping) suggests an ATM-oriented WAN access platform. It exposes virtual circuit (VC) configuration — IP address and subnet mask per VC — and traffic shaper configuration specifying sustainable and peak cell rates in both bits-per-second and cells-per-second. Its monitoring value is mainly around configuration and traffic-engineering status for the main CPU module: verifying virtual circuits are correctly addressed and that shaper rate settings match intended service levels, which is important for diagnosing throughput problems rather than physical hardware faults. It likely follows conventions similar to standard ATM-MIB for VC/cell-rate semantics given the shaper and cell-rate terminology. It is deployed on chassis-based WAN/ATM access multiplexer or router systems that use a main CPU module to manage virtual circuits and traffic shaping. Engineers can download the C-PRODUCT-MCPU-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in C-PRODUCT-MCPU-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- C-PRODUCT chassis WAN/ATM access multiplexer (main CPU module)
Monitoring Examples
An administrator would poll shaperTable/shaperEntry to compare shaperSustainableCellRateInbps and shaperPeakCellRateInbps against observed traffic on a virtual circuit, revealing whether a VC is being throttled below its expected peak throughput. Checking mcpuNewVcIpAddress and mcpuNewVcSubnetMask in mcpuNewVcTable before activation confirms a newly provisioned virtual circuit has correct addressing, preventing a misconfigured VC from being brought into service.
What Can Be Monitored
- virtual circuit IP address/subnet configuration
- sustainable cell rate (traffic shaping)
- peak cell rate (traffic shaping)
- per-VC shaper configuration
Imported Objects
From C-PRODUCT-BASE-MIB
| cardSlot | OBJECT-TYPE |
| vcpSideId | OBJECT-TYPE |
From C-PRODUCT-GROUP-MIB
| mcpu | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| IpAddress |
OIDs
RFC description
MCPU card virtual circuit and shaper management for ATM packet switching platforms.
Start monitoring Networking equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.