HPVCQOS-MIB

All MIBs › HPVCQOS-MIB

Organization: Hewlett-Packard Company

Last Updated: 2012-04-25

Category: Technology: QoS, Vendor: HP/HPE

Description: Manages Quality of Service (QoS) traffic classes and priority assignments in HP Virtual Connect modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPVCQOS-MIB?

HPVCQOS-MIB is an HP-specific MIB for the Virtual Connect Ethernet (VC-Enet) module, covering Quality of Service (QoS) configuration for blade server interconnects. It exposes objects for configuring traffic classes, classification maps, and per-interface QoS settings on the Virtual Connect module. Its monitoring value is primarily software/configuration status: confirming which traffic classes exist, how interfaces are mapped to classification schemes, and what QoS type/mode is configured, which helps diagnose whether specific traffic (e.g., storage or management traffic) is receiving its intended priority treatment. It is a vendor-specific extension used within HP BladeSystem environments and typically depends on the broader HP Virtual Connect management framework rather than IETF standard QoS MIBs. It is deployed in HP BladeSystem enclosures where Virtual Connect Ethernet modules interconnect blade servers to the data center network. Network engineers evaluating or troubleshooting this functionality can download the HPVCQOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPVCQOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP BladeSystem Virtual Connect Ethernet (VC-Enet) modules

Monitoring Examples

An administrator would poll vcQoSTrafficClassConfigTable (vcQoSTrafficClassConfigEntry) to enumerate configured traffic classes by vcQoSTrafficClassConfigIndex and vcQoSTrafficClassConfigName, then check vcQoSIfQoSConfigTable to see which vcQoSIfQoSTrafficClassConfigIndex and vcQoSIfQoSClassificationMapIndex are applied to a given interface. If an interface expected to carry high-priority storage traffic shows it mapped to a lower-priority vcQoSTrafficClassId, that misconfiguration would explain observed latency or packet loss for that traffic on the VC-Enet module.

What Can Be Monitored

configured traffic classes
per-interface QoS/classification map assignment
traffic class identity and index
QoS configuration type

Imported Objects

From HPVCMODULE-MIB

virtualConnect

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From RFC1155-SMI

enterprises

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
mib-2

From SNMPv2-TC

RowPointer
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
vcQoSMIB	1.3.6.1.4.1.11.5.7.5.2.5			This MIB module describes QoS specific MIB objects present in the Virtual Connect VC-Enet Module.
vcQoSMIBObjects	1.3.6.1.4.1.11.5.7.5.2.5.1
VCQ vcQoSConfigType	1.3.6.1.4.1.11.5.7.5.2.5.1.1	VcQoSConfigType	read-only	The configuration type of QoS used in this VC Enet module.
vcQoSIfQoSConfig	1.3.6.1.4.1.11.5.7.5.2.5.1.2
vcQoSIfQoSConfigTable	1.3.6.1.4.1.11.5.7.5.2.5.1.2.1		not-accessible	This table lists the Traffic Class Config table and the Classification Map table associcated with each port.
vcQoSIfQoSConfigEntry	1.3.6.1.4.1.11.5.7.5.2.5.1.2.1.1		not-accessible
INT vcQoSIfQoSTrafficClassConfigIndex	1.3.6.1.4.1.11.5.7.5.2.5.1.2.1.1.1	INTEGER	read-only	Value should be index value of the corresponding TrafficClassConfigTable entry
INT vcQoSIfQoSClassificationMapIndex	1.3.6.1.4.1.11.5.7.5.2.5.1.2.1.1.2	INTEGER	read-only	Value should be index value of the corresponding ClassificationMap entry
vcQoSTrafficClassConfig	1.3.6.1.4.1.11.5.7.5.2.5.1.3
vcQoSTrafficClassConfigTable	1.3.6.1.4.1.11.5.7.5.2.5.1.3.1		not-accessible	This table lists the available Traffic Class Tables.
vcQoSTrafficClassConfigEntry	1.3.6.1.4.1.11.5.7.5.2.5.1.3.1.1		not-accessible	One entry represents a Traffic Class Table
INT vcQoSTrafficClassConfigIndex	1.3.6.1.4.1.11.5.7.5.2.5.1.3.1.1.1	INTEGER	read-only	Index for the Traffic Class Config Table
STR vcQoSTrafficClassConfigName	1.3.6.1.4.1.11.5.7.5.2.5.1.3.1.1.2	SnmpAdminString	read-only	Name of the Traffic Class Table associated with this entry
vcQoSTrafficClass	1.3.6.1.4.1.11.5.7.5.2.5.1.4
vcQoSTrafficClassTable	1.3.6.1.4.1.11.5.7.5.2.5.1.4.1		not-accessible	Traffic Class Definition Table
vcQoSTrafficClassEntry	1.3.6.1.4.1.11.5.7.5.2.5.1.4.1.1		not-accessible
INT vcQoSTrafficClassId	1.3.6.1.4.1.11.5.7.5.2.5.1.4.1.1.1	INTEGER	read-only	Class/queue ID, index for the Traffic Class Table
STR vcQoSTrafficClassName	1.3.6.1.4.1.11.5.7.5.2.5.1.4.1.1.2	SnmpAdminString	read-only	Administratively assigned name for the Traffic Class
T/F vcQoSTrafficClassRealTime	1.3.6.1.4.1.11.5.7.5.2.5.1.4.1.1.3	TruthValue	read-only	Returns true if this class is real time.
INT vcQoSTrafficClassShare	1.3.6.1.4.1.11.5.7.5.2.5.1.4.1.1.4	INTEGER	read-only	Assigned minimum share for traffic in this class
INT vcQoSTrafficClassMaxShare	1.3.6.1.4.1.11.5.7.5.2.5.1.4.1.1.5	INTEGER	read-only	Maximum share allowed for traffic in this class
INT vcQoSTrafficClassEgressDot1pPrio	1.3.6.1.4.1.11.5.7.5.2.5.1.4.1.1.6	INTEGER	read-only	802.1p priority traffic in this class will egress with
T/F vcQoSTrafficClassEnabled	1.3.6.1.4.1.11.5.7.5.2.5.1.4.1.1.7	TruthValue	read-only	Returns true if this class is enabled.
vcQoSClassificationMap	1.3.6.1.4.1.11.5.7.5.2.5.1.5
vcQoSClassificationMapTable	1.3.6.1.4.1.11.5.7.5.2.5.1.5.1		not-accessible	This table lists the configured classification maps.
vcQoSClassificationMapEntry	1.3.6.1.4.1.11.5.7.5.2.5.1.5.1.1		not-accessible	Each entry is associated with a DSCP, Dot1p, ... map.
INT vcQoSClassificationMapIndex	1.3.6.1.4.1.11.5.7.5.2.5.1.5.1.1.1	INTEGER	read-only	Index for the Classification Map Table
STR vcQoSClassificationMapName	1.3.6.1.4.1.11.5.7.5.2.5.1.5.1.1.2	SnmpAdminString	read-only	Name of the classification map associated with this entry
vcQoSDot1pMap	1.3.6.1.4.1.11.5.7.5.2.5.1.6
vcQoSDot1pMapTable	1.3.6.1.4.1.11.5.7.5.2.5.1.6.1		not-accessible	Table of Ingress Dot1p to class mappings
vcQoSDot1pMapEntry	1.3.6.1.4.1.11.5.7.5.2.5.1.6.1.1		not-accessible
INT vcQoSDot1pMapPrioValue	1.3.6.1.4.1.11.5.7.5.2.5.1.6.1.1.1	INTEGER	read-only	Ingress Dot1p value of the traffic.
INT vcQoSDot1pMapTrafficClassId	1.3.6.1.4.1.11.5.7.5.2.5.1.6.1.1.2	INTEGER	read-only	Class/queue ID of the associated Traffic Class
vcQoSDscpMap	1.3.6.1.4.1.11.5.7.5.2.5.1.7
vcQoSDscpMapTable	1.3.6.1.4.1.11.5.7.5.2.5.1.7.1		not-accessible	Table of Ingress DSCP to class mappings
vcQoSDscpMapEntry	1.3.6.1.4.1.11.5.7.5.2.5.1.7.1.1		not-accessible
INT vcQoSDscpMapDscpValue	1.3.6.1.4.1.11.5.7.5.2.5.1.7.1.1.1	INTEGER	read-only	Ingress DSCP value of the traffic.
INT vcQoSDscpMapTrafficClassId	1.3.6.1.4.1.11.5.7.5.2.5.1.7.1.1.2	INTEGER	read-only	Class/queue ID of the associated Traffic Class
vcQoSMIBConformance	1.3.6.1.4.1.11.5.7.5.2.5.2
vcQoSMIBCompliances	1.3.6.1.4.1.11.5.7.5.2.5.2.1
vcQoSMIBCompliance	1.3.6.1.4.1.11.5.7.5.2.5.2.1.1			The compliance statement for entities which implement the VC MIB.
vcQoSMIBGroups	1.3.6.1.4.1.11.5.7.5.2.5.2.2
vcQoSGroup	1.3.6.1.4.1.11.5.7.5.2.5.2.2.1			Virtual Connect QoS objects.

RFC description

HP Virtual Connect Quality of Service configuration for VC-Enet modules including traffic classification and mapping.

Start monitoring HP BladeSystem Virtual Connect modules with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPVCQOS-MIB

What Is HPVCQOS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description