All MIBs › HPN-ICF-WIPS-MIB › hpnicfWIPSMalPktDctCfgTrapSupportSet
hpnicfWIPSMalPktDctCfgTrapSupportSet
Module: HPN-ICF-WIPS-MIB
OID (symbolic): HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctCfgTrapSupportSet
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Represents the bit string of supported malformed packet detect policy controlling the trap function. The specific malformed packet detect policy is supported if its corresponding bit is set to 1; otherwise its corresponding bit is set to 0. bit0: invalid IE length bit1: duplicated IE bit2: redundant IE bit3: invalid packet length bit4: illegal IBSS and ESS bit5: invalid source address bit6: overflow EAPOL key length bit7: malformed authetication bit8: malformed association request bit9: malformed HT-IE bit10: large duration bit11: null probe response bit12: invalid deauthentication reason code bit13: invalid disassociation reason code bit14: overflow SSID length bit15: fata-jack
What is hpnicfWIPSMalPktDctCfgTrapSupportSet?
Read-only 32-octet bit string of the malformed-packet detections that can raise SNMP traps on this device; 1 means supported. The bit layout (invalid IE length, duplicated IE, large duration, fata-jack and so on) follows the same list as the log support set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.2 snmpwalk -v2c -c public <target> HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctCfgTrapSupportSet
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.2.1 snmpget -v2c -c public <target> HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctCfgTrapSupportSet.1
Start monitoring HP/Comware wireless LAN controller or access point (Wireless Intrusion Prevention System) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctCfgTrapSupportSet OID value, configure state conditions and alerts, and monitor any HP/Comware wireless LAN controller or access point (Wireless Intrusion Prevention System) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.118 | hpnicfWIPS | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.118.1 | hpnicfWIPSConfigGroup | HPN-ICF-WIPS-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.118.1.12 | hpnicfWIPSMalPktDctConfigGroup | HPN-ICF-WIPS-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.2 | hpnicfWIPSMalPktDctCfgTrapSupportSet | HPN-ICF-WIPS-MIB |