HPN-ICF-IFQOS2-MIB

All MIBs › HPN-ICF-IFQOS2-MIB

Last Updated: 2013-11-28

Category: Technology: QoS, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages interface-level QoS policies including queuing, shaping, and policing on HP/Comware devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-IFQOS2-MIB?

HPN-ICF-IFQOS2-MIB is an HPE/H3C Comware ICF private MIB providing interface-level Quality of Service (QoS) management, covering queuing, traffic shaping, and policing applied to individual interfaces on the device. No populated object list is available in this snapshot, but a MIB of this kind typically models per-interface/per-queue tables for configured bandwidth, shaping parameters, and queue statistics such as packets dropped or bytes forwarded per traffic class. Its monitoring value centers on traffic-management software behavior rather than physical hardware: showing whether QoS policies are actively enforcing intended bandwidth guarantees and whether congestion is causing drops in specific classes. Persistent drops in a high-priority queue would strongly signal oversubscription or a misconfigured policy on that interface. It extends the standard IF-MIB framework with vendor-specific QoS detail, and HPN-ICF-IFQOS2-MIB SNMP monitoring is deployed on HPE/H3C Comware switches and routers to confirm QoS policies are being enforced as configured.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-IFQOS2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HPE/H3C Comware switches
HPE/H3C Comware routers

Monitoring Examples

No concrete sample object names are available for this module in this snapshot, so a specific polling scenario cannot be described with confidence. Typically an administrator would poll per-interface queue tables for drop counts and current queue depth to detect congestion in a given traffic class, where rising drops under a configured shaping rate would indicate that interface is oversubscribed relative to its QoS policy.

What Can Be Monitored

per-interface QoS queue statistics
traffic shaping/policing drop counts

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddressIPv6
InetAddressPrefixLength

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfIfQoSPassPackets OID:

Select an HPE/H3C Comware switch or router (per-interface QoS/shaping/policing) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfIfQoSPassPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of forwarded packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfQos2	1.3.6.1.4.1.11.2.14.11.15.2.65
hpnicfIfQos2	1.3.6.1.4.1.11.2.14.11.15.2.65.1			Interface QoS management information base.
hpnicfIfQoSHardwareQueueObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1
hpnicfIfQoSHardwareQueueConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1
hpnicfIfQoSQSModeTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1		not-accessible	A table of queue schedule mode information.
hpnicfIfQoSQSModeEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1.1		not-accessible	Queue schedule mode information entry.
INT hpnicfIfQoSQSMode	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1.1.1	INTEGER	read-write	The mode of schedule.
hpnicfIfQoSQSWeightTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2		not-accessible	A table of queue schedule weight configuration information.
hpnicfIfQoSQSWeightEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1		not-accessible	Queue schedule weight configuration information entry.
I32 hpnicfIfQoSQueueID	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.1	Integer32	not-accessible	Queue ID
INT hpnicfIfQoSQueueGroupType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.2	INTEGER	read-write	Group type of WRR and WFQ.
INT hpnicfIfQoSQSType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.3	INTEGER	read-write	Schedule type.
I32 hpnicfIfQoSQSValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.4	Integer32	read-write	Schedule value.
I32 hpnicfIfQoSQSMaxDelay	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.5	Integer32	read-write	Max delay.
I32 hpnicfIfQoSQSMinBandwidth	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.6	Integer32	read-write	Min bandwidth. Unit: kbps.
U32 hpnicfIfQoSQSMinBandwidthPercent	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.7	Unsigned32	read-write	Percent of min bandwidth. Unit: %. The value is 255 when the schedule mode of the queue is strict queuing.
hpnicfIfQoSHardwareQueueRunInfoGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2
hpnicfIfQoSHardwareQueueRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1		not-accessible	A table of queue statistic information.
hpnicfIfQoSHardwareQueueRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1		not-accessible	Queue statistic information entry.
C64 hpnicfIfQoSPassPacketsEx	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.1	Counter64	read-only	The number of forwarded packets.
C64 hpnicfIfQoSDropPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.2	Counter64	read-only	The number of dropped packets.
C64 hpnicfIfQoSPassBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.3	Counter64	read-only	The bytes of forwarded packets.
U32 hpnicfIfQoSPassPPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.4	Unsigned32	read-only	The PPS of forwarded packets. PPS: packets per second.
U32 hpnicfIfQoSPassBPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.5	Unsigned32	read-only	The BPS of forwarded packets. BPS: bytes per second.
C64 hpnicfIfQoSDropBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.6	Counter64	read-only	The bytes of dropped packets.
U32 hpnicfIfQoSQueueLengthInPkts	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.7	Unsigned32	read-only	The max number of packets which the queue can hold.
U32 hpnicfIfQoSQueueLengthInBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.8	Unsigned32	read-only	The max bytes of packets which the queue can hold.
U32 hpnicfIfQoSCurQueuePkts	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.9	Unsigned32	read-only	The number of packets in the current queue.
U32 hpnicfIfQoSCurQueueBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.10	Unsigned32	read-only	The bytes of packets in the current queue.
U32 hpnicfIfQoSCurQueuePPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.11	Unsigned32	read-only	The PPS of packets in the current queue.
U32 hpnicfIfQoSCurQueueBPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.12	Unsigned32	read-only	The BPS of packets in the current queue.
C64 hpnicfIfQoSTailDropPkts	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.13	Counter64	read-only	The number of packets dropped by tail dropping.
C64 hpnicfIfQoSTailDropBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.14	Counter64	read-only	The bytes of packets dropped by tail dropping.
U32 hpnicfIfQoSTailDropPPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.15	Unsigned32	read-only	The PPS of packets dropped by tail dropping.
U32 hpnicfIfQoSTailDropBPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.16	Unsigned32	read-only	The BPS of packets dropped by tail dropping.
C64 hpnicfIfQoSWredDropPkts	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.17	Counter64	read-only	The number of packets dropped by WRED.
C64 hpnicfIfQoSWredDropBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.18	Counter64	read-only	The bytes of packets dropped by WRED.
U32 hpnicfIfQoSWredDropPPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.19	Unsigned32	read-only	The PPS of packets dropped by WRED.
U32 hpnicfIfQoSWredDropBPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.20	Unsigned32	read-only	The BPS of packets dropped by WRED.
hpnicfIfQoSHQueueTcpRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2		not-accessible	A table of queue statistic information about TCP and non-TCP packets.
hpnicfIfQoSHQueueTcpRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1		not-accessible	Queue statistic information entry about TCP and non-TCP packets.
C64 hpnicfIfQoSWredDropLPreNTcpPkts	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.1	Counter64	read-only	The number of low-precedence non-TCP packets dropped by WRED.
C64 hpnicfIfQoSWredDropLPreNTcpBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.2	Counter64	read-only	The bytes of low-precedence non-TCP packets dropped by WRED.
U32 hpnicfIfQoSWredDropLPreNTcpPPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.3	Unsigned32	read-only	The PPS of low-precedence non-TCP packets dropped by WRED. PPS: packets per second.
U32 hpnicfIfQoSWredDropLPreNTcpBPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.4	Unsigned32	read-only	The BPS of low-precedence non-TCP packets dropped by WRED. BPS: bytes per second.
C64 hpnicfIfQoSWredDropLPreTcpPkts	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.5	Counter64	read-only	The number of low-precedence TCP packets dropped by WRED.
C64 hpnicfIfQoSWredDropLPreTcpBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.6	Counter64	read-only	The bytes of low-precedence TCP packets dropped by WRED.
U32 hpnicfIfQoSWredDropLPreTcpPPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.7	Unsigned32	read-only	The PPS of low-precedence TCP packets dropped by WRED.
U32 hpnicfIfQoSWredDropLPreTcpBPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.8	Unsigned32	read-only	The BPS of low-precedence TCP packets dropped by WRED.
C64 hpnicfIfQoSWredDropHPreNTcpPkts	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.9	Counter64	read-only	The number of high-precedence non-TCP packets dropped by WRED.
C64 hpnicfIfQoSWredDropHPreNTcpBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.10	Counter64	read-only	The bytes of high-precedence non-TCP packets dropped by WRED.
U32 hpnicfIfQoSWredDropHPreNTcpPPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.11	Unsigned32	read-only	The PPS of high-precedence non-TCP packets dropped by WRED.
U32 hpnicfIfQoSWredDropHPreNTcpBPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.12	Unsigned32	read-only	The BPS of high-precedence non-TCP packets dropped by WRED.
C64 hpnicfIfQoSWredDropHPreTcpPkts	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.13	Counter64	read-only	The number of high-precedence TCP packets dropped by WRED.
C64 hpnicfIfQoSWredDropHPreTcpBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.14	Counter64	read-only	The bytes of high-precedence TCP packets dropped by WRED.
U32 hpnicfIfQoSWredDropHPreTcpPPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.15	Unsigned32	read-only	The PPS of high-precedence TCP packets dropped by WRED.
U32 hpnicfIfQoSWredDropHPreTcpBPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.16	Unsigned32	read-only	The BPS of high-precedence TCP packets dropped by WRED.
hpnicfIfQoSSoftwareQueueObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2
hpnicfIfQoSFIFOObject	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1
hpnicfIfQoSFIFOConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1		not-accessible	A table of FIFO queue information.
hpnicfIfQoSFIFOConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1.1		not-accessible	FIFO queue information entry.
I32 hpnicfIfQoSFIFOMaxQueueLen	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1.1.1	Integer32	read-write	The maximum length of FIFO queue.
hpnicfIfQoSFIFORunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2		not-accessible	A table of FIFO queue statistic information.
hpnicfIfQoSFIFORunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1		not-accessible	FIFO queue statistic information entry.
I32 hpnicfIfQoSFIFOSize	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1.1	Integer32	read-only	The number of packet in FIFO queue.
C64 hpnicfIfQoSFIFODiscardPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1.2	Counter64	read-only	The number of discard packet.
hpnicfIfQoSPQObject	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2
hpnicfIfQoSPQConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1
hpnicfIfQoSPQDefaultTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1		not-accessible	A table of priority queue default configuration information.
hpnicfIfQoSPQDefaultEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1		not-accessible	Priority queue default configuration information entry.
I32 hpnicfIfQoSPQListNumber	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1.1	Integer32	not-accessible	Priority queue list number.
PRI hpnicfIfQoSPQDefaultQueueType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1.2	PriorityQueue	read-write	Specify priority queue that packets put into by default.
hpnicfIfQoSPQQueueLengthTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2		not-accessible	A table of queue length of priority queue configuration information.
hpnicfIfQoSPQQueueLengthEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1		not-accessible	Queue length of priority queue configuration information entry.
PRI hpnicfIfQoSPQQueueLengthType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1.1	PriorityQueue	not-accessible	Type of priority queue.
I32 hpnicfIfQoSPQQueueLengthValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1.2	Integer32	read-write	The size of priority queue.
hpnicfIfQoSPQClassRuleTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3		not-accessible	A table of class rule of priority queue information.
hpnicfIfQoSPQClassRuleEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1		not-accessible	A table of class rule of priority queue information.
INT hpnicfIfQoSPQClassRuleType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.1	INTEGER	not-accessible	Type of class rule. 'ipall' means all ip packets.
I32 hpnicfIfQoSPQClassRuleValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.2	Integer32	not-accessible	Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..3999, 10000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0
PRI hpnicfIfQoSPQClassRuleQueueType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.3	PriorityQueue	read-create	Specify the queue for matched packets.
ROW hpnicfIfQoSPQClassRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.4	RowStatus	read-create	RowStatus.
hpnicfIfQoSPQApplyTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4		not-accessible	A table of priority queue instance.
hpnicfIfQoSPQApplyEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1		not-accessible	Priority queue instance information.
I32 hpnicfIfQoSPQApplyListNumber	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1.1	Integer32	read-create	Priority queue list number.
ROW hpnicfIfQoSPQApplyRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1.2	RowStatus	read-create	RowStatus.
hpnicfIfQoSPQRunInfoGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2
hpnicfIfQoSPQRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1		not-accessible	A table of priority queue statistic information.
hpnicfIfQoSPQRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1		not-accessible	Priority queue statistic information entry.
PRI hpnicfIfQoSPQType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.1	PriorityQueue	not-accessible	The type of priority queue.
I32 hpnicfIfQoSPQSize	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.2	Integer32	read-only	The number of packets in the priority queue.
I32 hpnicfIfQoSPQLength	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.3	Integer32	read-only	The maximum length of priority queue.
C64 hpnicfIfQoSPQDiscardPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.4	Counter64	read-only	The packet number of priority queue discard.
hpnicfIfQoSCQObject	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3
hpnicfIfQoSCQConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1
hpnicfIfQoSCQDefaultTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1		not-accessible	A table of custom queue default configuration information.
hpnicfIfQoSCQDefaultEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1		not-accessible	Custom queue default configuration information entry.
I32 hpnicfIfQoSCQListNumber	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1.1	Integer32	not-accessible	Custom queue list number.
I32 hpnicfIfQoSCQDefaultQueueID	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1.2	Integer32	read-write	Default queue ID.
hpnicfIfQoSCQQueueLengthTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2		not-accessible	A table of queue length of custom queue configuration information.
hpnicfIfQoSCQQueueLengthEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1		not-accessible	Queue length of custom queue configuration information entry.
I32 hpnicfIfQoSCQQueueID	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.1	Integer32	not-accessible	Custom queue index.
I32 hpnicfIfQoSCQQueueLength	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.2	Integer32	read-write	The size of custom queue.
I32 hpnicfIfQoSCQQueueServing	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.3	Integer32	read-write	The maximum bytes that the specified queue can transmit in each turn.
hpnicfIfQoSCQClassRuleTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3		not-accessible	A table of class rule of custom queue information.
hpnicfIfQoSCQClassRuleEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1		not-accessible	A table of class rule of custom queue information.
INT hpnicfIfQoSCQClassRuleType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.1	INTEGER	not-accessible	Type of class rule. 'ipall' means all ip packets.
I32 hpnicfIfQoSCQClassRuleValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.2	Integer32	not-accessible	Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0.
I32 hpnicfIfQoSCQClassRuleQueueID	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.3	Integer32	read-create	Specify the queue for matched packets.
ROW hpnicfIfQoSCQClassRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.4	RowStatus	read-create	RowStatus.
hpnicfIfQoSCQApplyTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4		not-accessible	A table of custom queue instance.
hpnicfIfQoSCQApplyEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1		not-accessible	Custom queue instance information.
I32 hpnicfIfQoSCQApplyListNumber	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1.1	Integer32	read-create	Custom queue list number.
ROW hpnicfIfQoSCQApplyRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1.2	RowStatus	read-create	RowStatus.
hpnicfIfQoSCQRunInfoGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2
hpnicfIfQoSCQRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1		not-accessible	A table of custom queue statistic information.
hpnicfIfQoSCQRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1		not-accessible	Custom queue statistic information entry.
I32 hpnicfIfQoSCQRunInfoSize	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.1	Integer32	read-only	The number of packets in the custom queue.
I32 hpnicfIfQoSCQRunInfoLength	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.2	Integer32	read-only	The maximum length of custom queue.
C64 hpnicfIfQoSCQRunInfoDiscardPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.3	Counter64	read-only	The packet number of custom queue discard.
hpnicfIfQoSWFQObject	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4
hpnicfIfQoSWFQConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1
hpnicfIfQoSWFQTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1		not-accessible	A table of weighted fair queue information.
hpnicfIfQoSWFQEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1		not-accessible	Weighted fair queue information entry.
I32 hpnicfIfQoSWFQQueueLength	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.1	Integer32	read-create	The length of weighted fair queue.
INT hpnicfIfQoSWFQQueueNumber	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.2	INTEGER	read-create	The number of weighted fair queue.
ROW hpnicfIfQoSWFQRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.3	RowStatus	read-create	RowStatus.
INT hpnicfIfQoSWFQType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.4	INTEGER	read-create	The type of weighted fair queue.
hpnicfIfQoSWFQRunInfoGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2
hpnicfIfQoSWFQRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1		not-accessible	A table of weighted fair queue statistic information.
hpnicfIfQoSWFQRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1		not-accessible	Weighted fair queue statistic information entry.
I32 hpnicfIfQoSWFQSize	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.1	Integer32	read-only	The number of packets in all the queues
I32 hpnicfIfQoSWFQLength	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.2	Integer32	read-only	The length of weighted fair queue.
C64 hpnicfIfQoSWFQDiscardPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.3	Counter64	read-only	The number of discarded packets in all the queues.
I32 hpnicfIfQoSWFQHashedActiveQueues	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.4	Integer32	read-only	The number of active queues.
I32 hpnicfIfQoSWFQHashedMaxActiveQueues	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.5	Integer32	read-only	The number of maximum active queues.
I32 hpnicfIfQosWFQhashedTotalQueues	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.6	Integer32	read-only	The number of queues.
hpnicfIfQoSBandwidthGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5
hpnicfIfQoSBandwidthTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1		not-accessible	A table of bandwidth of interface information.
hpnicfIfQoSBandwidthEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1		not-accessible	Bandwidth information entry.
I32 hpnicfIfQoSMaxBandwidth	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.1	Integer32	read-create	The maximum bandwidth of interface. Unit : Kbps
I32 hpnicfIfQoSReservedBandwidthPct	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.2	Integer32	read-create	Max reserved bandwidth of the interface for QoS.
ROW hpnicfIfQoSBandwidthRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.3	RowStatus	read-create	RowStatus.
hpnicfIfQoSQmtokenGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6
hpnicfIfQoSQmtokenTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1		not-accessible	A table of qmtoken information.
hpnicfIfQoSQmtokenEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1		not-accessible	Qmtoken information entry.
I32 hpnicfIfQoSQmtokenNumber	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1.1	Integer32	read-create	The number of tokens.
ROW hpnicfIfQoSQmtokenRosStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1.2	RowStatus	read-create	RowStatus
hpnicfIfQoSRTPQObject	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7
hpnicfIfQoSRTPQConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1
hpnicfIfQoSRTPQConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1		not-accessible	A table of Real-time protocol queue information.
hpnicfIfQoSRTPQConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1		not-accessible	The information of Real-time protocol queue entry.
I32 hpnicfIfQoSRTPQStartPort	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.1	Integer32	read-create	Minimum threshold of UDP destination port.
I32 hpnicfIfQoSRTPQEndPort	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.2	Integer32	read-create	Maximum threshold of UDP destination port.
I32 hpnicfIfQoSRTPQReservedBandwidth	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.3	Integer32	read-create	Maximum bandwidth. unit : kbps
U32 hpnicfIfQoSRTPQCbs	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.4	Unsigned32	read-create	Committed Burst Size. Unit: byte
ROW hpnicfIfQoSRTPQRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.5	RowStatus	read-create	RowStatus.
hpnicfIfQoSRTPQRunInfoGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2
hpnicfIfQoSRTPQRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1		not-accessible	A table of statistic information of Real-time protocol information.
hpnicfIfQoSRTPQRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1		not-accessible	Statistic information of Real-time protocol information entry.
I32 hpnicfIfQoSRTPQPacketNumber	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.1	Integer32	read-only	The number of packets in the Real-time protocol queue.
I32 hpnicfIfQoSRTPQPacketSize	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.2	Integer32	read-only	The size of Real-time protocol queue.
C64 hpnicfIfQoSRTPQOutputPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.3	Counter64	read-only	The number of output packets.
C64 hpnicfIfQoSRTPQDiscardPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.4	Counter64	read-only	The number of discard packets.
hpnicfIfQoSCarListObject	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8
hpnicfIfQoCarListGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1
hpnicfIfQoSCarlTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1		not-accessible	Committed Access Rate List(CARL) table.
hpnicfIfQoSCarlEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1		not-accessible	CARL configuration infomation.
I32 hpnicfIfQoSCarlListNum	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.1	Integer32	not-accessible	The index of the table, which is the CARL number.
INT hpnicfIfQoSCarlParaType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.2	INTEGER	read-create	Parameter type of the CARL number.
OCT hpnicfIfQoSCarlParaValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.3	OCTET STRING	read-create	Parameter value of the CARL table.
ROW hpnicfIfQoSCarlRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.4	RowStatus	read-create	RowStatus.
hpnicfIfQoSLineRateObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3
hpnicfIfQoSLRConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1		not-accessible	A table of line rate configuration information.
hpnicfIfQoSLRConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1		not-accessible	Line rate configuration information entry.
DIR hpnicfIfQoSLRDirection	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.1	Direction	not-accessible	Line rate on the inbound or outbound of data stream.
U32 hpnicfIfQoSLRCir	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.2	Unsigned32	read-create	Committed Information Rate.
U32 hpnicfIfQoSLRCbs	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.3	Unsigned32	read-create	Committed Burst Size.
U32 hpnicfIfQoSLREbs	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.4	Unsigned32	read-create	Excess Burst Size.
ROW hpnicfIfQoSRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.5	RowStatus	read-create	RowStatus.
U32 hpnicfIfQoSLRPir	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.6	Unsigned32	read-create	Peak Information Rate.
INT hpnicfIfQoSLRUnit	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.7	INTEGER	read-create	LR Unit: Absolute, Unit Kbps (1) Percent, Unit % (2)
hpnicfIfQoSLRRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2		not-accessible	A table of line rate run info information.
hpnicfIfQoSLRRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1		not-accessible	Line rate run info information entry.
C64 hpnicfIfQoSLRRunInfoPassedPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.1	Counter64	read-only	The number of passed packets.
C64 hpnicfIfQoSLRRunInfoPassedBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.2	Counter64	read-only	The number of passed bytes.
C64 hpnicfIfQoSLRRunInfoDelayedPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.3	Counter64	read-only	The number of delayed packets.
C64 hpnicfIfQoSLRRunInfoDelayedBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.4	Counter64	read-only	The number of delayed bytes.
INT hpnicfIfQoSLRRunInfoActiveShaping	1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.5	INTEGER	read-only	The flag of shaping.
hpnicfIfQoSCARObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4
hpnicfIfQoSAggregativeCarGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1
I32 hpnicfIfQoSAggregativeCarNextIndex	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.1	Integer32	read-only	This object contains an appropriate value to be used for hpnicfIfQoSAggregativeCarIndex when creating rows in the hpnicfIfQoSAggregativeCarConfigTable. Begin with 1.
hpnicfIfQoSAggregativeCarConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2		not-accessible	A table of aggregative car information.
hpnicfIfQoSAggregativeCarConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1		not-accessible	Aggregative car information.
I32 hpnicfIfQoSAggregativeCarIndex	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.1	Integer32	not-accessible	The index of aggregative car.
OCT hpnicfIfQoSAggregativeCarName	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.2	OCTET STRING	read-create	The name of aggregative car.
U32 hpnicfIfQoSAggregativeCarCir	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.3	Unsigned32	read-create	Committed-information-rate. Unit : kbps
U32 hpnicfIfQoSAggregativeCarCbs	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.4	Unsigned32	read-create	Committed-burst-size. Unit : byte
U32 hpnicfIfQoSAggregativeCarEbs	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.5	Unsigned32	read-create	Excess-burst-size. Unit : byte
U32 hpnicfIfQoSAggregativeCarPir	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.6	Unsigned32	read-create	Peak-information-rate. Unit : kbps
CAR hpnicfIfQoSAggregativeCarGreenActionType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.7	CarAction	read-create	Supported green action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS.
I32 hpnicfIfQoSAggregativeCarGreenActionValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.8	Integer32	read-create	The value is to remark When green action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
CAR hpnicfIfQoSAggregativeCarYellowActionType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.9	CarAction	read-create	Supported yellow action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS.
I32 hpnicfIfQoSAggregativeCarYellowActionValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.10	Integer32	read-create	The value is to remark When yellow action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
CAR hpnicfIfQoSAggregativeCarRedActionType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.11	CarAction	read-create	Supported red action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS.
I32 hpnicfIfQoSAggregativeCarRedActionValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.12	Integer32	read-create	The value is to remark When red action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
INT hpnicfIfQoSAggregativeCarType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.13	INTEGER	read-create	The type of aggregative CAR. The enumeration 'aggregative' indicates that the ports with a same aggregative CAR use one token bulk. The enumeration 'notAggregative' indicates that each port uses one token bulk.
ROW hpnicfIfQoSAggregativeCarRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.14	RowStatus	read-create	RowStatus.
hpnicfIfQoSAggregativeCarApplyTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3		not-accessible	A table of aggregative car instance.
hpnicfIfQoSAggregativeCarApplyEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1		not-accessible	Aggregative car instance information.
DIR hpnicfIfQoSAggregativeCarApplyDirection	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.1	Direction	not-accessible	Direction.
INT hpnicfIfQoSAggregativeCarApplyRuleType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.2	INTEGER	not-accessible	The type of class rule.
I32 hpnicfIfQoSAggregativeCarApplyRuleValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.3	Integer32	not-accessible	The number of class rule. ipv4acl : 2000..5999 ipv6acl : 2000..42767 carl : 1..16 other types: 0.
I32 hpnicfIfQoSAggregativeCarApplyCarIndex	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.4	Integer32	read-create	The index of aggregative car.
ROW hpnicfIfQoSAggregativeCarApplyRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.5	RowStatus	read-create	RowStatus.
hpnicfIfQoSAggregativeCarRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4		not-accessible	A table of aggregative car statistic information.
hpnicfIfQoSAggregativeCarRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1		not-accessible	Aggregative car statistic information.
C64 hpnicfIfQoSAggregativeCarGreenPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.1	Counter64	read-only	Number of packets conforming CIR.
C64 hpnicfIfQoSAggregativeCarGreenBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.2	Counter64	read-only	Number of bytes conforming CIR
C64 hpnicfIfQoSAggregativeCarYellowPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.3	Counter64	read-only	Number of yellow packets.
C64 hpnicfIfQoSAggregativeCarYellowBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.4	Counter64	read-only	Number of yellow bytes.
C64 hpnicfIfQoSAggregativeCarRedPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.5	Counter64	read-only	Number of packets exceeding CIR.
C64 hpnicfIfQoSAggregativeCarRedBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.6	Counter64	read-only	Number of bytes exceeding CIR.
hpnicfIfQoSTricolorCarGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2
hpnicfIfQoSTricolorCarConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1		not-accessible	A table of tricolor car configuration information.
hpnicfIfQoSTricolorCarConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1		not-accessible	Tricolor car configuration information entry.
DIR hpnicfIfQoSTricolorCarDirection	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.1	Direction	not-accessible	Direction.
INT hpnicfIfQoSTricolorCarType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.2	INTEGER	not-accessible	The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, carl, any.
I32 hpnicfIfQoSTricolorCarValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.3	Integer32	not-accessible	The index of the table. ipv4acl: the number is ipv4 acl number; ipv6acl: the number is ipv6 acl number; carl: the number is CARL number; any: the number is 0;
U32 hpnicfIfQoSTricolorCarCir	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.4	Unsigned32	read-create	Committed Information Rate. Unit: kbps.
U32 hpnicfIfQoSTricolorCarCbs	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.5	Unsigned32	read-create	Committed Burst Size. Unit: byte.
U32 hpnicfIfQoSTricolorCarEbs	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.6	Unsigned32	read-create	Excess Burst Size. Unit: byte.
U32 hpnicfIfQoSTricolorCarPir	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.7	Unsigned32	read-create	Peak Information Rate. Unit: kbps.
CAR hpnicfIfQoSTricolorCarGreenActionType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.8	CarAction	read-create	Green Action.
I32 hpnicfIfQoSTricolorCarGreenActionValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.9	Integer32	read-create	The value is to remark when green action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
CAR hpnicfIfQoSTricolorCarYellowActionType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.10	CarAction	read-create	Yellow Action.
I32 hpnicfIfQoSTricolorCarYellowActionValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.11	Integer32	read-create	The value is to remark when yellow action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
CAR hpnicfIfQoSTricolorCarRedActionType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.12	CarAction	read-create	Red Action
I32 hpnicfIfQoSTricolorCarRedActionValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.13	Integer32	read-create	The value is to remark when red action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
ROW hpnicfIfQoSTricolorCarRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.14	RowStatus	read-create	RowStatus.
hpnicfIfQoSTricolorCarRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2		not-accessible	A table of tricolor car statistic information.
hpnicfIfQoSTricolorCarRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1		not-accessible	Tricolor car statistic information entry.
C64 hpnicfIfQoSTricolorCarGreenPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.1	Counter64	read-only	The number of green packets.
C64 hpnicfIfQoSTricolorCarGreenBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.2	Counter64	read-only	The number of green bytes.
C64 hpnicfIfQoSTricolorCarYellowPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.3	Counter64	read-only	The number of yellow packets.
C64 hpnicfIfQoSTricolorCarYellowBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.4	Counter64	read-only	The number of yellow bytes.
C64 hpnicfIfQoSTricolorCarRedPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.5	Counter64	read-only	The number of red packets.
C64 hpnicfIfQoSTricolorCarRedBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.6	Counter64	read-only	The number of red bytes.
hpnicfIfQoSGTSObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5
hpnicfIfQoSGTSConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1		not-accessible	A table of generic traffic shaping information.
hpnicfIfQoSGTSConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1		not-accessible	Generic traffic shaping information entry.
INT hpnicfIfQoSGTSClassRuleType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.1	INTEGER	not-accessible	The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, any, queue.
I32 hpnicfIfQoSGTSClassRuleValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.2	Integer32	not-accessible	Value of type. ipv4acl : 2000..4999 ipv6acl : 2000..42767 any : 0 queue : 0..7
U32 hpnicfIfQoSGTSCir	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.3	Unsigned32	read-create	Committed Information Rate. Unit: kbps.
U32 hpnicfIfQoSGTSCbs	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.4	Unsigned32	read-create	Committed Burst Size. Unit: byte.
U32 hpnicfIfQoSGTSEbs	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.5	Unsigned32	read-create	Excess Burst Size. Unit: byte.
I32 hpnicfIfQoSGTSQueueLength	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.6	Integer32	read-create	The length of queue.
ROW hpnicfIfQoSGTSConfigRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.7	RowStatus	read-create	RowStatus.
hpnicfIfQoSGTSRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2		not-accessible	A table of generic traffic shaping's statistic information.
hpnicfIfQoSGTSRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1		not-accessible	Generic traffic shaping's statistic information entry.
I32 hpnicfIfQoSGTSQueueSize	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.1	Integer32	read-only	The number of packets in the queue.
C64 hpnicfIfQoSGTSPassedPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.2	Counter64	read-only	The number of passed packets.
C64 hpnicfIfQoSGTSPassedBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.3	Counter64	read-only	The number of passed bytes.
C64 hpnicfIfQoSGTSDiscardPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.4	Counter64	read-only	The number of discard packets.
C64 hpnicfIfQoSGTSDiscardBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.5	Counter64	read-only	The number of discard bytes.
C64 hpnicfIfQoSGTSDelayedPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.6	Counter64	read-only	The number of delayed packets.
C64 hpnicfIfQoSGTSDelayedBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.7	Counter64	read-only	The number of delayed bytes.
hpnicfIfQoSWREDObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6
hpnicfIfQoSWredGroupGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1
I32 hpnicfIfQoSWredGroupNextIndex	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.1	Integer32	read-only	This object contains an appropriate value to be used for hpnicfIfQoSWredGroupIndex when creating rows in the hpnicfIfQoSWredGroupTable. Begin with 0.
hpnicfIfQoSWredGroupTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2		not-accessible	A table of WRED group information.
hpnicfIfQoSWredGroupEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1		not-accessible	WRED group information.
I32 hpnicfIfQoSWredGroupIndex	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.1	Integer32	not-accessible	WRED group index.
OCT hpnicfIfQoSWredGroupName	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.2	OCTET STRING	read-create	WRED group name.
INT hpnicfIfQoSWredGroupType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.3	INTEGER	read-create	Type of WRED group.
I32 hpnicfIfQoSWredGroupWeightingConstant	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.4	Integer32	read-create	Exponent for WRED calculates the average length of queue. If 'hpnicfIfQoSWredGroupType' is 'queue', the object is ineffective. So, it must use the object, which is 'hpnicfIfQoSWredGroupExponent' of hpnicfIfQoSWredGroupContentTable, to indicate the exponent of each queue of the queue WRED group.
ROW hpnicfIfQoSWredGroupRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.6	RowStatus	read-create	RowStatus.
hpnicfIfQoSWredGroupContentTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3		not-accessible	A table of priority WRED information.
hpnicfIfQoSWredGroupContentEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1		not-accessible	Priority WRED information entry.
I32 hpnicfIfQoSWredGroupContentIndex	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.1	Integer32	not-accessible	The priority of a packet. Different type of packet has different priority. Type of priority Range of priority dot1p 0..7 ippre 0..7 dscp 0..63 atmclp 0..1 frde 0..1 exp 0..7 queue 0..7 ( defined by product ) dropLevel 0..2
I32 hpnicfIfQoSWredGroupContentSubIndex	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.2	Integer32	not-accessible	The sub index. Different type of packet has different value. Type of priority Range of value queue 0..2 other types : 0
I32 hpnicfIfQoSWredLowLimit	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.3	Integer32	read-create	Discard low limit.
I32 hpnicfIfQoSWredHighLimit	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.4	Integer32	read-create	Discard high limit.
I32 hpnicfIfQoSWredDiscardProb	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.5	Integer32	read-create	Discard probability.
I32 hpnicfIfQoSWredGroupExponent	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.6	Integer32	read-create	Exponent for WRED calculates the average length of queue. Only 'hpnicfIfQoSWredGroupType' is 'queue', the object is effective. This object is designed to indicate the exponent of each queue of the queue WRED group.
ROW hpnicfIfQoSWredRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.7	RowStatus	read-create	RowStatus.
hpnicfIfQoSWredGroupApplyIfTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4		not-accessible	A table of WRED group applied interface information.
hpnicfIfQoSWredGroupApplyIfEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1		not-accessible	WRED group applied interface information.
I32 hpnicfIfQoSWredGroupApplyIndex	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.1	Integer32	read-create	WRED group index.
OCT hpnicfIfQoSWredGroupApplyName	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.2	OCTET STRING	read-only	WRED group name.
ROW hpnicfIfQoSWredGroupIfRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.3	RowStatus	read-create	RowStatus.
hpnicfIfQoSWredApplyIfRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5		not-accessible	A table of WRED statistic information.
hpnicfIfQoSWredApplyIfRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1		not-accessible	WRED statistic information.
C64 hpnicfIfQoSWredPreRandomDropNum	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1.1	Counter64	read-only	The number of random drop.
C64 hpnicfIfQoSWredPreTailDropNum	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1.2	Counter64	read-only	The number of tail drop.
hpnicfIfQoSPortWredGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2
hpnicfIfQoSPortWredWeightConstantTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1		not-accessible	A table of port WRED configuration information.
hpnicfIfQoSPortWredWeightConstantEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1		not-accessible	Port WRED configuration information entry.
T/F hpnicfIfQoSPortWredEnable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.1	TruthValue	read-create	The object is used to enable or disable WRED function of the port. true: Enable WRED function of a port. false: Disable WRED function of a port.
I32 hpnicfIfQoSPortWredWeightConstant	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.2	Integer32	read-create	Weight constant.
ROW hpnicfIfQoSPortWredWeightConstantRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.3	RowStatus	read-create	RowStatus.
hpnicfIfQoSPortWredPreConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2		not-accessible	A table of weighted random early detect precedence configuration information.
hpnicfIfQoSPortWredPreConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1		not-accessible	Weighted random early detect precedence configuration information entry.
I32 hpnicfIfQoSPortWredPreID	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.1	Integer32	not-accessible	IP precedence, from 0 to 7.
I32 hpnicfIfQoSPortWredPreLowLimit	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.2	Integer32	read-create	Low Limit(number of packets)
I32 hpnicfIfQoSPortWredPreHighLimit	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.3	Integer32	read-create	High limit(number of packets)
I32 hpnicfIfQoSPortWredPreDiscardProbability	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.4	Integer32	read-create	Discard probability denominator
ROW hpnicfIfQoSPortWredPreRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.5	RowStatus	read-create	RowStatus.
hpnicfIfQoSPortWredRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3		not-accessible	A table of WRED statistic information.
hpnicfIfQoSPortWredRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1		not-accessible	WRED statistic information entry.
C64 hpnicfIfQoSWREDTailDropNum	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1.1	Counter64	read-only	The number of tail drop.
C64 hpnicfIfQoSWREDRandomDropNum	1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1.2	Counter64	read-only	The number of random drop.
hpnicfIfQoSPortPriorityObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.7
hpnicfIfQoSPortPriorityConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1
hpnicfIfQoSPortPriorityTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1		not-accessible	A table of port priority information.
hpnicfIfQoSPortPriorityEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1.1		not-accessible	Port priority information entry.
I32 hpnicfIfQoSPortPriorityValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1.1.1	Integer32	read-write	The priority of a port.
hpnicfIfQoSPortPirorityTrustTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2		not-accessible	A table of each port's trusted priority information.
hpnicfIfQoSPortPirorityTrustEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1		not-accessible	Per-port trusted priority information entry.
INT hpnicfIfQoSPortPriorityTrustTrustType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1.1	INTEGER	read-write	Trusted priority type of a port.
INT hpnicfIfQoSPortPriorityTrustOvercastType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1.2	INTEGER	read-write	The overcast type.
hpnicfIfQoSMapObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9
hpnicfIfQoSPriMapConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1
I32 hpnicfIfQoSPriMapGroupNextIndex	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.1	Integer32	read-only	This object contains an appropriate value to be used for hpnicfIfQoSPriMapGroupIndex when creating rows in the hpnicfIfQoSPriMapGroupTable. Begin with 64.
hpnicfIfQoSPriMapGroupTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2		not-accessible	A table of map group information.
hpnicfIfQoSPriMapGroupEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1		not-accessible	Map group information entry.
I32 hpnicfIfQoSPriMapGroupIndex	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.1	Integer32	not-accessible	The index of map, which are defined by system and user. The index of system defined map is 1 to 9. System defined map-name/map-index pairs like this: Map-index Map-name 1 dot1p-dp 2 dot1p-dscp 3 dot1p-lp 4 dscp-dot1p 5 dscp-dp 6 dscp-dscp 7 dscp-lp 8 exp-dp 9 exp-lp
INT hpnicfIfQoSPriMapGroupType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.2	INTEGER	read-create	The type of map group.
OCT hpnicfIfQoSPriMapGroupName	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.3	OCTET STRING	read-create	The name of map group.
ROW hpnicfIfQoSPriMapGroupRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.4	RowStatus	read-create	RowStatus.
hpnicfIfQoSPriMapContentTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3		not-accessible	A table of priority map configuration information.
hpnicfIfQoSPriMapContentEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1		not-accessible	Priority map configuration information entry.
I32 hpnicfIfQoSPriMapGroupImportValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.1	Integer32	not-accessible	Priority map table import value list. Different map has different hpnicfIfQoSPriMapConfigImportValue. Map-name Range of hpnicfIfQoSPriMapConfigImportValue dot1p-dp (0..7) dot1p-dscp (0..7) dot1p-lp (0..7) dscp-dot1p (0..63) dscp-dp (0..63) dscp-dscp (0..63) dscp-lp(7) (0..63) exp-dp(8) (0..7) exp-lp (0..7)
I32 hpnicfIfQoSPriMapGroupExportValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.2	Integer32	read-create	Priority map table output. Different map has different hpnicfIfQoSPriMapGroupExportValue. dot1p-dp: 0..7 dot1p-dscp: 0..63 dot1p-lp: 0..7 dscp-dot1p: 0..7 dscp-dp: 0..7 dscp-dscp: 0..63 dscp-lp: 0..7 exp-dp: 0..7 exp-lp: 0..7
ROW hpnicfIfQoSPriMapContentRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.3	RowStatus	read-create	RowStatus.
hpnicfIfQoSPrePriMapTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4		not-accessible	Pre-defined priority mapping table information.
hpnicfIfQoSPrePriMapEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1		not-accessible	Pre-defined priority mapping table entry.
INT hpnicfIfQoSPrePriMapTableType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.1	INTEGER	not-accessible	The type of pre-defined priority mapping table.
INT hpnicfIfQoSPrePriMapTableColor	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.2	INTEGER	not-accessible	The color of pre-defined priority mapping table.
INT hpnicfIfQoSPrePriMapTableDirection	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.3	INTEGER	not-accessible	The direction of pre-defined priority mapping table.
I32 hpnicfIfQoSPrePriMapTableImportValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.4	Integer32	not-accessible	Input value of priority mapping table. Different priority has different hpnicfIfQoSPrePriMapTableImportValue. Priority-type Range of hpnicfIfQoSPrePriMapTableImportValue dot1p (0..7) dscp (0..63) lp (0..7) exp (0..7) ipPrecedence (0..7) up (0..7) dot11e (0..7)
I32 hpnicfIfQoSPrePriMapTableExportValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.5	Integer32	read-write	Output value of priority mapping table. Different priority has different hpnicfIfQoSPrePriMapTableExportValue. Priority-type Range of hpnicfIfQoSPrePriMapTableExportValue dot1p (0..7) dscp (0..63) lp (0..7) exp (0..7) ipPrecedence (0..7) up (0..7) dp (0..2) fc (0..7) rpr (0..2)
hpnicfIfQoSL3PlusObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.10
hpnicfIfQoSPortBindingGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1
hpnicfIfQoSPortBindingTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1		not-accessible	A table of EACL sub-interface binding information for L3+ board .
hpnicfIfQoSPortBindingEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1		not-accessible	Binding information entry.
I32 hpnicfIfQoSBindingIf	1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1.1	Integer32	read-create	The binding interface.
ROW hpnicfIfQoSBindingRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1.2	RowStatus	read-create	RowStatus
hpnicfQoSTraStaObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11
hpnicfQoSTraStaConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1
hpnicfQoSIfTraStaConfigInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1		not-accessible	A table of traffic statistics configuration information.
hpnicfQoSIfTraStaConfigInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1		not-accessible	An entry of interface traffic statistics configuration information.
DIR hpnicfQoSIfTraStaConfigDirection	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.1	Direction	not-accessible	The direction of the traffic statistics.
OCT hpnicfQoSIfTraStaConfigQueue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.2	OCTET STRING	read-create	The bitmap of Queue ID. The octet specifies queues 0 through 7. If a bit has a value of '1', the corresponding queue is configured in the set of Queues; if a bit has a value of '0', the corresponding queue is not configured.
OCT hpnicfQoSIfTraStaConfigDot1p	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.3	OCTET STRING	read-create	The bitmap of Dot1p value. The octet specifies Dot1p values 0 through 7. If a bit has a value of '1', the corresponding Dot1p value is configured in the set of Dot1p values; if a bit has a value of '0', the corresponding Dot1p value is not configured.
OCT hpnicfQoSIfTraStaConfigDscp	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.4	OCTET STRING	read-create	The bitmap of Dscp value. Each octet within this value specifies a set of eight Dscp values, with the first octet specifying Dscp values 0 through 7, the second octet specifying Dscp values 8 through 15, etc. If a bit has a value of '1', the corresponding Dscp value is configured in the set of Dscp values; if a bit has a value of '0', the corresponding Dscp value is not configured.
OCT hpnicfQoSIfTraStaConfigVlan	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.5	OCTET STRING	read-create	The bitmap of VLAN ID. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 0 through 7, the second octet specifying VLANs 8 through 15, etc. If a bit has a value of '1', the corresponding VLAN is configured in the set of VLANs; if a bit has a value of '0', the corresponding VLAN is not configured.
ROW hpnicfQoSIfTraStaConfigStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.6	RowStatus	read-create	The row status of this table entry.
hpnicfQoSTraStaRunGroup	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2
hpnicfQoSIfTraStaRunInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1		not-accessible	A table of traffic statistics running information.
hpnicfQoSIfTraStaRunInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1		not-accessible	An entry of interface traffic statistics running information.
INT hpnicfQoSIfTraStaRunObjectType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.1	INTEGER	not-accessible	Type of statistics object.
I32 hpnicfQoSIfTraStaRunObjectValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.2	Integer32	not-accessible	Value range for the object type: for Queue: 0~7 for Dot1p: 0~7 for Dscp: 0~63 for VlanID: 1~4094
DIR hpnicfQoSIfTraStaRunDirection	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.3	Direction	not-accessible	The direction of the traffic statistics.
C64 hpnicfQoSIfTraStaRunPassPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.4	Counter64	read-only	Number of passed packets.
C64 hpnicfQoSIfTraStaRunDropPackets	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.5	Counter64	read-only	Number of dropped packets.
C64 hpnicfQoSIfTraStaRunPassBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.6	Counter64	read-only	Number of passed bytes.
C64 hpnicfQoSIfTraStaRunDropBytes	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.7	Counter64	read-only	Number of dropped bytes.
C64 hpnicfQoSIfTraStaRunPassPPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.8	Counter64	read-only	PPS (packets per second) of passed packets.
C64 hpnicfQoSIfTraStaRunPassBPS	1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.9	Counter64	read-only	BPS (bytes per second) of passed packets.
hpnicfQoSGlobalPriorityObject	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12
hpnicfQoSRemarkTcpPortPriTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1		not-accessible	A table of remarking TCP port priority information. The priority field of all packets with the specified TCP port will be remarked to the configured value.
hpnicfQoSRemarkTcpPortPriEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1		not-accessible	Remarking TCP port priority information entry.
I32 hpnicfQoSRemarkTcpPortStart	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.1	Integer32	not-accessible	Start value of TCP port range.
I32 hpnicfQoSRemarkTcpPortEnd	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.2	Integer32	read-create	End value of TCP port range. It can not be less than start value.
INT hpnicfQoSRemarkTcpPortType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.3	INTEGER	read-create	IPv4 packet, IPv6 packet, or all IP packet.
U32 hpnicfQoSRemarkTcpPortDot1p	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.4	Unsigned32	read-create	Dot1p value.
U32 hpnicfQoSRemarkTcpPortDscp	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.5	Unsigned32	read-create	DSCP value.
ROW hpnicfQoSRemarkTcpPortRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.6	RowStatus	read-create	Row status.
hpnicfQoSRemarkUdpPortPriTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2		not-accessible	A table of remarking UDP port priority information. The priority field of all packets with the specified UDP port will be remarked to the configured value.
hpnicfQoSRemarkUdpPortPriEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1		not-accessible	Remarking UDP port priority information entry.
I32 hpnicfQoSRemarkUdpPortStart	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.1	Integer32	not-accessible	Start value of UDP port range.
I32 hpnicfQoSRemarkUdpPortEnd	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.2	Integer32	read-create	End value of UDP port range. It can not be less than start value.
INT hpnicfQoSRemarkUdpPortType	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.3	INTEGER	read-create	IPv4 packet, IPv6 packet, or all IP packet.
U32 hpnicfQoSRemarkUdpPortDot1p	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.4	Unsigned32	read-create	Dot1p value.
U32 hpnicfQoSRemarkUdpPortDscp	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.5	Unsigned32	read-create	DSCP value.
ROW hpnicfQoSRemarkUdpPortRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.6	RowStatus	read-create	Row status.
hpnicfQoSRemarkIPv4AddrPriTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3		not-accessible	A table of remarking IPv4 address priority information.
hpnicfQoSRemarkIPv4AddrPriEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1		not-accessible	Remarking IPv4 address priority information entry. The priority field of all IPv4 packets with the specified IP address will be remarked to the configured value.
IP hpnicfQoSRemarkIPv4AddrValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.1	IpAddress	not-accessible	IPv4 address.
IP hpnicfQoSRemarkIPv4AddrMask	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.2	IpAddress	read-create	Mask of IPv4 address.
U32 hpnicfQoSRemarkIPv4AddrMaskLength	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.3	Unsigned32	read-create	Mask length of IPv4 address.
U32 hpnicfQoSRemarkIPv4AddrDot1p	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.4	Unsigned32	read-create	Dot1p value.
U32 hpnicfQoSRemarkIPv4AddrDscp	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.5	Unsigned32	read-create	DSCP value.
ROW hpnicfQoSRemarkIPv4AddrRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.6	RowStatus	read-create	Row status.
hpnicfQoSRemarkIPv6AddrPriTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4		not-accessible	A table of remarking IPv6 address priority information. The priority field of all IPv6 packets with the specified IP address will be remarked to the configured value.
hpnicfQoSRemarkIPv6AddrPriEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1		not-accessible	Remarking IPv6 address priority information entry.
ADR hpnicfQoSRemarkIPv6AddrValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.1	InetAddressIPv6	not-accessible	IPv6 address.
ADR hpnicfQoSRemarkIPv6AddrPrefixLength	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.2	InetAddressPrefixLength	read-create	Prefix length of IPv6 address.
U32 hpnicfQoSRemarkIPv6AddrDot1p	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.3	Unsigned32	read-create	Dot1p value.
U32 hpnicfQoSRemarkIPv6AddrDscp	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.4	Unsigned32	read-create	DSCP value.
ROW hpnicfQoSRemarkIPv6AddrRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.5	RowStatus	read-create	Row status.
hpnicfQoSRemarkProtocolPriTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5		not-accessible	A table of remarking layer 3 protocol priority information. The 802.1p priority field of all packets of the specified protocol will be remarked to the configured value.
hpnicfQoSRemarkProtocolPriEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1		not-accessible	Remarking layer 3 protocol priority information entry.
INT hpnicfQoSRemarkProtocolValue	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.1	INTEGER	not-accessible	Layer 3 protocol type.
U32 hpnicfQoSRemarkProtocolDot1p	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.2	Unsigned32	read-create	Dot1p value.
ROW hpnicfQoSRemarkProtocolRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.3	RowStatus	read-create	Row status.
hpnicfQoSRemarkVlanPriTable	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6		not-accessible	A table of remarking VLAN priority information. The priority field of all packets of the specified VLAN will be remarked to the configured value.
hpnicfQoSRemarkVlanPriEntry	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1		not-accessible	Remarking VLAN priority information entry.
I32 hpnicfQoSRemarkVlanStart	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.1	Integer32	not-accessible	Start VLAN ID.
I32 hpnicfQoSRemarkVlanEnd	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.2	Integer32	read-create	End VLAN ID. It can not be less than start value.
U32 hpnicfQoSRemarkVlanDot1p	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.3	Unsigned32	read-create	Dot1p value.
U32 hpnicfQoSRemarkVlanDscp	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.4	Unsigned32	read-create	DSCP value.
ROW hpnicfQoSRemarkVlanRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.5	RowStatus	read-create	Row status.
hpnicfQoSTypeOfServiceObjects	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.7
INT hpnicfQoSTypeOfServiceMode	1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.7.1	INTEGER	read-write	Global type of service. The type of service is disabled by default. When in ip-precedence mode, device uses ip-precedence value to determine the 802.1p priority of the packet and its outbound queue. When in DSCP mode, device uses DSCP value to determine the 802.1p priority of the packet and its outbound queue.

RFC description

Manages interface QoS configuration for Hewlett-Packard Network switches including queue scheduling.

Start monitoring HPE/H3C Comware switch or router (per-interface QoS/shaping/policing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-IFQOS2-MIB