All MIBs › HH3C-STORAGE-SNAP-MIB
Organization: H3C Technologies Co., Ltd.
Last Updated: 2007-09-14
Category: Domain: Storage, Vendor: H3C/HH3C
Description: HH3C MIB for storage snapshot management configuring and monitoring point-in-time snapshots on H3C storage systems.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HH3C-STORAGE-SNAP-MIB?
HH3C-STORAGE-SNAP-MIB is an H3C (Hangzhou Huawei-3Com / New H3C) proprietary MIB for managing point-in-time snapshot functionality on H3C storage arrays, covering configuration of snapshot logical-volume space and the reserve/snap areas used to hold snapshot data. It exposes configuration objects for snapshot area sizing, auto-expansion behavior, thresholds, and increment sizes, along with status and notification objects for each snapshot logical volume. Its monitoring value is centered on storage capacity/health status rather than CPU or chassis sensors - specifically watching whether snapshot reserve space is nearing capacity, whether auto-expand is functioning, and the operational status of each snap area, which is critical to preventing snapshot failures due to exhausted space. It depends on H3C's broader storage device MIB framework for the underlying logical-volume identifiers referenced by hh3cSnapLvIndex. It is deployed on H3C enterprise storage arrays/SANs where administrators use snapshots for backup or point-in-time recovery. Engineers can download the HH3C-STORAGE-SNAP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-STORAGE-SNAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C enterprise storage array/SAN
Monitoring Examples
A storage administrator can poll hh3cSnapConfigTable / hh3cSnapConfigEntry to check hh3cSnapAreaThreshold against the current usage implied by hh3cSnapAreaMaxSize and hh3cSnapAreaIncSize, catching a snapshot area approaching capacity before hh3cSnapAreaFullDeleteTM triggers automatic deletion of old snapshots. The hh3cSnapAreaAutoExpand flag reveals whether the area is configured to grow automatically, and hh3cSnapAreaStatus (combined with hh3cSnapAreaNotify) shows the current health/notification state of each snapshot area on a given hh3cSnapLvIndex logical volume. hh3cAddtionalSpaceMaxSize gives a global ceiling on additional space that can be allocated for snapshots across the system.
What Can Be Monitored
- snapshot area capacity usage
- auto-expand configuration
- capacity threshold
- snapshot area status
- full-delete timing
- additional space allocation limit
This MIB depends on
Related MIBs
Imported Objects
From ENTITY-MIB
| entPhysicalIndex | OBJECT-TYPE |
From HH3C-STORAGE-REF-MIB
| Hh3cExtendSelectPolicy | |
| Hh3cLvIDType | |
| Hh3cRaidIDType | |
| Hh3cStorageActionType | |
| Hh3cStorageEnableState | |
| Hh3cStorageOnlineState | |
| hh3cStorageRef | MODULE-IDENTITY |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DateAndTime | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hh3cStorageSnap | 1.3.6.1.4.1.25506.10.2 | This MIB describes the general information about snap of storage device. | ||
| hh3cSnapMibObjects | 1.3.6.1.4.1.25506.10.2.1 | |||
| hh3cGlobalSnapSettingsObject | 1.3.6.1.4.1.25506.10.2.1.1 | |||
| I32 hh3cAddtionalSpaceMaxSize | 1.3.6.1.4.1.25506.10.2.1.1.1 | Integer32 | read-only | This object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource . |
| hh3cSnapConfigTable | 1.3.6.1.4.1.25506.10.2.1.2 | not-accessible | This table contains some entity to config the snapshot resources for special logic volumes. | |
| hh3cSnapConfigEntry | 1.3.6.1.4.1.25506.10.2.1.2.1 | not-accessible | An entry containing configuration about the snapshot resource. | |
| HH3 hh3cSnapLvIndex | 1.3.6.1.4.1.25506.10.2.1.2.1.1 | Hh3cLvIDType | not-accessible | This object identifies the index of hh3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of hh3cLvIndex. |
| HH3 hh3cSnapAreaId | 1.3.6.1.4.1.25506.10.2.1.2.1.2 | Hh3cLvIDType | read-only | This object identifies the snapshot resource of the logic volume. |
| HH3 hh3cSnapAreaAutoExpand | 1.3.6.1.4.1.25506.10.2.1.2.1.3 | Hh3cStorageEnableState | read-create | This object describes if the space of snapshot resource can be expanded automatically. |
| I32 hh3cSnapAreaThreshold | 1.3.6.1.4.1.25506.10.2.1.2.1.4 | Integer32 | read-create | If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaThreshold' means the threshold of the snapshot resource. |
| I32 hh3cSnapAreaIncSize | 1.3.6.1.4.1.25506.10.2.1.2.1.5 | Integer32 | read-create | If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the amount of space to be allocated for each expansion. |
| I32 hh3cSnapAreaMaxSize | 1.3.6.1.4.1.25506.10.2.1.2.1.6 | Integer32 | read-create | If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the max size of snapshot resource. |
| INT hh3cSnapAreaFullDeleteTM | 1.3.6.1.4.1.25506.10.2.1.2.1.7 | INTEGER | read-create | This object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not. |
| HH3 hh3cSnapAreaNotify | 1.3.6.1.4.1.25506.10.2.1.2.1.8 | Hh3cStorageEnableState | read-create | This object describes if a snapshot notification should be send to the client when the system create a timemark. |
| HH3 hh3cSnapAreaStatus | 1.3.6.1.4.1.25506.10.2.1.2.1.9 | Hh3cStorageOnlineState | read-only | This object describes the state of the snapshot resource. |
| HH3 hh3cSnapRaidUuid | 1.3.6.1.4.1.25506.10.2.1.2.1.10 | Hh3cRaidIDType | read-create | This object describes the raid where the snapshot resource is created. |
| I32 hh3cSnapRaidSize | 1.3.6.1.4.1.25506.10.2.1.2.1.11 | Integer32 | read-only | This object describes the size designated when the snapshot resource is created. |
| HH3 hh3cSnapRaidSelectPolicy | 1.3.6.1.4.1.25506.10.2.1.2.1.12 | Hh3cExtendSelectPolicy | read-create | This object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated hh3cSnapRaidUuid object is equal to null. |
| I32 hh3cSnapAreaTotalSize | 1.3.6.1.4.1.25506.10.2.1.2.1.13 | Integer32 | read-only | This object identifies the current total size of the snapshot resource. |
| I32 hh3cSnapAreaFreeSize | 1.3.6.1.4.1.25506.10.2.1.2.1.14 | Integer32 | read-only | This object identifies the free size of the snapshot resource. |
| I32 hh3cSnapExtendTimes | 1.3.6.1.4.1.25506.10.2.1.2.1.15 | Integer32 | read-only | This object identifies the times the snapshot resource extended. |
| ROW hh3cSnapRowStatus | 1.3.6.1.4.1.25506.10.2.1.2.1.16 | RowStatus | read-create | This object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the TimeMark is enabled, or the replication is enabled. |
| hh3cSnapExpandTable | 1.3.6.1.4.1.25506.10.2.1.3 | not-accessible | This table contains some entity to expand a snapshot resource. | |
| hh3cSnapExpandEntry | 1.3.6.1.4.1.25506.10.2.1.3.1 | not-accessible | An entry containing expand information applicable to the snapshot resource. | |
| HH3 hh3cSAExpRaidUuid | 1.3.6.1.4.1.25506.10.2.1.3.1.1 | Hh3cRaidIDType | not-accessible | This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. |
| I32 hh3cSAExpSize | 1.3.6.1.4.1.25506.10.2.1.3.1.2 | Integer32 | read-create | This object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read. |
| I32 hh3cSAExpRaidSize | 1.3.6.1.4.1.25506.10.2.1.3.1.3 | Integer32 | read-only | This object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read. |
| ROW hh3cSnapAreaExpRowStatus | 1.3.6.1.4.1.25506.10.2.1.3.1.4 | RowStatus | read-create | This object describes the actions to expand the size for snap. |
| hh3cSnapCopyTable | 1.3.6.1.4.1.25506.10.2.1.4 | not-accessible | This table contains some entity about snapshot copy. | |
| hh3cSnapCopyEntry | 1.3.6.1.4.1.25506.10.2.1.4.1 | not-accessible | An entry containing snapshot copy information applicable. | |
| HH3 hh3cSnapCopyLvIndex | 1.3.6.1.4.1.25506.10.2.1.4.1.1 | Hh3cLvIDType | read-write | This object identifies the index of destination logic volume for snapshot copy. |
| I32 hh3cSnapCopyPercentage | 1.3.6.1.4.1.25506.10.2.1.4.1.2 | Integer32 | read-only | This object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equal to '100'. |
| DAT hh3cSnapCopyStartTime | 1.3.6.1.4.1.25506.10.2.1.4.1.3 | DateAndTime | read-only | This object identifies the time to start the snapshot copy. |
| INT hh3cSnapCopySwitch | 1.3.6.1.4.1.25506.10.2.1.4.1.4 | INTEGER | read-write | This object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source logic volume has not been created, the action of snapshot copy will be refused by agent. |
| hh3cTimeMarkConfigTable | 1.3.6.1.4.1.25506.10.2.1.5 | not-accessible | This table contains some entity to config a TimeMark on a special logic volume. | |
| hh3cTimeMarkConfigEntry | 1.3.6.1.4.1.25506.10.2.1.5.1 | not-accessible | An entry containing config information applicable to the TimeMark. | |
| I32 hh3cTimeMarkCounts | 1.3.6.1.4.1.25506.10.2.1.5.1.1 | Integer32 | read-write | This object identifies the max num of TimeMark which can be configed. |
| DAT hh3cTimeMarkInitializeTime | 1.3.6.1.4.1.25506.10.2.1.5.1.2 | DateAndTime | read-write | This object identifies the date and time when the first TimeMark is created on the logic volume. |
| I32 hh3cTimeMarkInterval | 1.3.6.1.4.1.25506.10.2.1.5.1.3 | Integer32 | read-write | This object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min value is 10 seconds. |
| DAT hh3cTimeMarkLastTime | 1.3.6.1.4.1.25506.10.2.1.5.1.4 | DateAndTime | read-write | This object identifies the date and time when the latest TimeMark is created on the logic volume. |
| I32 hh3cTimeMarkTotal | 1.3.6.1.4.1.25506.10.2.1.5.1.5 | Integer32 | read-only | This object identifies the current num of TimeMark. |
| HH3 hh3cTimeMarkSwitch | 1.3.6.1.4.1.25506.10.2.1.5.1.6 | Hh3cStorageEnableState | read-create | This object describes enable or disable TimeMark. |
| hh3cTimeMarkCreateTable | 1.3.6.1.4.1.25506.10.2.1.6 | not-accessible | This table contains some entity to create a TimeMark on a special logic volume. | |
| hh3cTimeMarkCreateEntry | 1.3.6.1.4.1.25506.10.2.1.6.1 | not-accessible | An entry containing create information applicable to the TimeMark. | |
| DAT hh3cTimeMarkStamp | 1.3.6.1.4.1.25506.10.2.1.6.1.1 | DateAndTime | not-accessible | This object identifies the date and time the TimeMark is created. |
| OCT hh3cTimeMarkComment | 1.3.6.1.4.1.25506.10.2.1.6.1.2 | OCTET STRING | read-only | This object identifies the comment of the TimeMark. |
| I32 hh3cTimeMarkSize | 1.3.6.1.4.1.25506.10.2.1.6.1.3 | Integer32 | read-only | This object identifies the current size of the TimeMark. |
| ROW hh3cTimeMarkRowStatus | 1.3.6.1.4.1.25506.10.2.1.6.1.4 | RowStatus | read-create | This object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using. |
| hh3cTimeMarkCopyTable | 1.3.6.1.4.1.25506.10.2.1.7 | not-accessible | This table contains some entity about a TimeMark copy. | |
| hh3cTimeMarkCopyEntry | 1.3.6.1.4.1.25506.10.2.1.7.1 | not-accessible | An entry containing config information applicable to the TimeMark copy. | |
| HH3 hh3cTMCopyDestLvId | 1.3.6.1.4.1.25506.10.2.1.7.1.1 | Hh3cLvIDType | read-only | This object identifies the index of destination logic volume for TimeMark copy. |
| I32 hh3cTMCopyPercentage | 1.3.6.1.4.1.25506.10.2.1.7.1.2 | Integer32 | read-only | This object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equal to '100'. |
| DAT hh3cTMCopyStartTime | 1.3.6.1.4.1.25506.10.2.1.7.1.3 | DateAndTime | read-only | This object identifies the time to start the TimeMark copy. |
| INT hh3cTMCopySwitch | 1.3.6.1.4.1.25506.10.2.1.7.1.4 | INTEGER | read-write | This object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get. |
| hh3cTimeMarkRollbackTable | 1.3.6.1.4.1.25506.10.2.1.8 | not-accessible | This table contains some entity to use a TimeMark to rollback the logic volume. | |
| hh3cTimeMarkRollbackEntry | 1.3.6.1.4.1.25506.10.2.1.8.1 | not-accessible | An entry containing config information applicable to use a TimeMark to rollback the logic volume. | |
| I32 hh3cTMRollbackPercentage | 1.3.6.1.4.1.25506.10.2.1.8.1.1 | Integer32 | read-only | This object identifies the percentage of rollback. |
| DAT hh3cTMRollbackStartTime | 1.3.6.1.4.1.25506.10.2.1.8.1.2 | DateAndTime | read-only | This object identifies the time to start the rollback. |
| HH3 hh3cTMRollbackSwitch | 1.3.6.1.4.1.25506.10.2.1.8.1.3 | Hh3cStorageActionType | read-write | This object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark behind it will be deleted. |
| hh3cTimeViewTable | 1.3.6.1.4.1.25506.10.2.1.9 | not-accessible | This table contains some entity to config a TimeView on a special TimeMark. | |
| hh3cTimeViewEntry | 1.3.6.1.4.1.25506.10.2.1.9.1 | not-accessible | An entry containing config information applicable to the TimeView. | |
| DAT hh3cTimeViewStamp | 1.3.6.1.4.1.25506.10.2.1.9.1.1 | DateAndTime | not-accessible | This object identifies the TimeView. The object identified by this index is the same object as identified by the same value of hh3cTimeMarkStamp. |
| HH3 hh3cTimeViewID | 1.3.6.1.4.1.25506.10.2.1.9.1.2 | Hh3cLvIDType | read-only | This object identifies the TimeView. |
| OCT hh3cTimeViewName | 1.3.6.1.4.1.25506.10.2.1.9.1.3 | OCTET STRING | read-create | This object identifies the name of the TimeView. |
| ROW hh3cTimeViewRowStatus | 1.3.6.1.4.1.25506.10.2.1.9.1.4 | RowStatus | read-create | This object describes the actions to create or delete the TimeView. |
| hh3cReplicaConfigTable | 1.3.6.1.4.1.25506.10.2.1.10 | not-accessible | This table contains some entity to config replication for a logic volume. | |
| hh3cReplicaConfigEntry | 1.3.6.1.4.1.25506.10.2.1.10.1 | not-accessible | An entry containing config information applicable to the replication for a logic volume. | |
| HH3 hh3cRepLocalLvIndex | 1.3.6.1.4.1.25506.10.2.1.10.1.1 | Hh3cLvIDType | not-accessible | This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of hh3cSnapLvIndex. |
| INT hh3cLvRepLocalWay | 1.3.6.1.4.1.25506.10.2.1.10.1.2 | INTEGER | read-only | The value of 'outgoing' means the hh3cRepLocalLvIndex is the primary logic volume of replication, and the hh3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming' means the hh3cRepLocalLvIndex is the replica logic volume of replication. , and the hh3cRepRemoteLvIndex is the primary logic volume. |
| IP hh3cRepLocalServerIP | 1.3.6.1.4.1.25506.10.2.1.10.1.3 | InetAddress | read-create | This object identifies the ip address of local server. |
| IPt hh3cRepLocalServerIPType | 1.3.6.1.4.1.25506.10.2.1.10.1.4 | InetAddressType | read-create | This object identifies the ip address type of local server. |
| OCT hh3cRepLocalServerName | 1.3.6.1.4.1.25506.10.2.1.10.1.5 | OCTET STRING | read-only | This object identifies the name of local server. |
| OCT hh3cRepLocalServerUsername | 1.3.6.1.4.1.25506.10.2.1.10.1.6 | OCTET STRING | read-create | This object identifies the username of local server. |
| OCT hh3cRepLocalServerPassword | 1.3.6.1.4.1.25506.10.2.1.10.1.7 | OCTET STRING | read-create | This object identifies the password of local server. |
| IP hh3cRepRemoteServerIP | 1.3.6.1.4.1.25506.10.2.1.10.1.8 | InetAddress | read-create | This object identifies the ip address of remote server. |
| IPt hh3cRepRemoteServerIPType | 1.3.6.1.4.1.25506.10.2.1.10.1.9 | InetAddressType | read-create | This object identifies the ip address type of remote server. |
| OCT hh3cRepRemoteServerName | 1.3.6.1.4.1.25506.10.2.1.10.1.10 | OCTET STRING | read-only | This object identifies the name of remote server. |
| OCT hh3cRepRemoteServerUsername | 1.3.6.1.4.1.25506.10.2.1.10.1.11 | OCTET STRING | read-create | This object identifies the username of remote server. |
| OCT hh3cRepRemoteServerPassword | 1.3.6.1.4.1.25506.10.2.1.10.1.12 | OCTET STRING | read-create | This object identifies the password of remote server. |
| HH3 hh3cRepRemoteLvIndex | 1.3.6.1.4.1.25506.10.2.1.10.1.13 | Hh3cLvIDType | read-create | This object identifies the logic volume of remote server. |
| INT hh3cReplicaMode | 1.3.6.1.4.1.25506.10.2.1.10.1.14 | INTEGER | read-create | This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system determines it is not practical or possible. The value of 'remote' means that a snapshot is taken of the primary resource at prescribed intervals based on the criteria you set (schedule and/or watermark value). Note that the associated Continuous Replication Resource can not be created if the value of this boject is not equal to 'adaptive'. |
| I32 hh3cReplicaWatermark | 1.3.6.1.4.1.25506.10.2.1.10.1.15 | Integer32 | read-create | This object identifies the size of watermark which means a replication is scheduled. |
| I32 hh3cReplicaWatermarkRetry | 1.3.6.1.4.1.25506.10.2.1.10.1.16 | Integer32 | read-create | If the 'hh3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute. |
| DAT hh3cReplicaInitializeTime | 1.3.6.1.4.1.25506.10.2.1.10.1.17 | DateAndTime | read-create | This object identifies the time to start an initial replication. |
| I32 hh3cReplicaInterval | 1.3.6.1.4.1.25506.10.2.1.10.1.18 | Integer32 | read-create | This object identifies how often the replication should be repeated after initial replication. The units is minute. |
| HH3 hh3cReplicaEncrypt | 1.3.6.1.4.1.25506.10.2.1.10.1.19 | Hh3cStorageEnableState | read-create | This object identifies the encrypt option is enable or diable. |
| HH3 hh3cReplicaCompress | 1.3.6.1.4.1.25506.10.2.1.10.1.20 | Hh3cStorageEnableState | read-create | This object identifies the compress option is enable or diable. |
| HH3 hh3cReplicaUseExistTM | 1.3.6.1.4.1.25506.10.2.1.10.1.21 | Hh3cStorageEnableState | read-create | This object identifies if using the exist TimeMark to replicate or not. |
| INT hh3cReplicaProtocol | 1.3.6.1.4.1.25506.10.2.1.10.1.22 | INTEGER | read-create | This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol. |
| T/F hh3cReplicaScanDiff | 1.3.6.1.4.1.25506.10.2.1.10.1.23 | TruthValue | read-create | This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized. |
| INT hh3cReplicaStatSwitch | 1.3.6.1.4.1.25506.10.2.1.10.1.24 | INTEGER | read-create | This object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication relation and promote the remote copy on the target server. The value of 'sync' means synchronize mannually (force a replication that is not scheduled.) The value of 'scan' means scan the delta data between primary resource and replica resource. The value of 'reversal' means switch the roles of the primary resource and replica resource. The replication configuration is maintained. The primary and replica must be synchronized in order to reverse a replica. The value of 'stop' means stop a replication that is currently in progress. The value of 'suspend' means suspend future replications from automatically being triggered by replication policies (watermark, interval, time). This will not stop a replication that is currently in progress. The value of 'resume' means resume the replication status from suspended to normal. Note that if the action of 'upgrade' is executed successfully, this replica resource will become a normal logic volume, and this entry will be deleted automatically. Note that if the action of 'reversal' is executed successfully, Clients will be disconnected from the former primary resource. |
| ROW hh3cReplicaRowStatus | 1.3.6.1.4.1.25506.10.2.1.10.1.25 | RowStatus | read-create | This object identifies the action to enable or disable the replication. |
| hh3cReplicaStateTable | 1.3.6.1.4.1.25506.10.2.1.11 | not-accessible | This table contains some entity to show replication state. | |
| hh3cReplicaStateEntry | 1.3.6.1.4.1.25506.10.2.1.11.1 | not-accessible | An entry containing show information applicable to the replication state. | |
| I32 hh3cReplicaDelta | 1.3.6.1.4.1.25506.10.2.1.11.1.1 | Integer32 | read-only | This object identifies the size of delta data after last sync. |
| DAT hh3cReplicaLastSyncTime | 1.3.6.1.4.1.25506.10.2.1.11.1.2 | DateAndTime | read-only | This object identifies the date and time when last sync is taken. |
| DAT hh3cReplicaNextSyncTime | 1.3.6.1.4.1.25506.10.2.1.11.1.3 | DateAndTime | read-only | This object identifies the date and time when next sync will be taken. |
| I32 hh3cReplicaSyncTotalSize | 1.3.6.1.4.1.25506.10.2.1.11.1.4 | Integer32 | read-only | This object identifies how much data need to be synchronized to the replica resource for current replication. |
| I32 hh3cReplicaSyncCurPercentage | 1.3.6.1.4.1.25506.10.2.1.11.1.5 | Integer32 | read-only | This object identifies how much data has been synchronized to the replica resource for current replication. |
| I32 hh3cReplicaSyncPerformance | 1.3.6.1.4.1.25506.10.2.1.11.1.6 | Integer32 | read-only | This object identifies the performance of the synchronize. The unit is MB/s. |
| INT hh3cReplicaRunStatus | 1.3.6.1.4.1.25506.10.2.1.11.1.7 | INTEGER | read-only | This object identifies the state of the replica. |
| hh3cCDRConfigTable | 1.3.6.1.4.1.25506.10.2.1.12 | not-accessible | This table contains some entity to config Continuous Replication Resource. | |
| hh3cCDRConfigEntry | 1.3.6.1.4.1.25506.10.2.1.12.1 | not-accessible | An entry containing some information applicable to Continuous Replication Resource of the logic volume. | |
| HH3 hh3cCDRLvIndex | 1.3.6.1.4.1.25506.10.2.1.12.1.1 | Hh3cLvIDType | not-accessible | This object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by the same value of hh3cRepLocalLvIndex. Note that an entry of hh3cCDRConfigTable can be created only when the associated hh3cCDRDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cCDRDistributeTable objects should be deleted automatically. |
| I32 hh3cCDRID | 1.3.6.1.4.1.25506.10.2.1.12.1.2 | Integer32 | read-only | This object identifies the Continuous Replication Resource. |
| HH3 hh3cCDRStatus | 1.3.6.1.4.1.25506.10.2.1.12.1.3 | Hh3cStorageOnlineState | read-only | This object identifies the state of the Continuous Replication Resource. |
| I32 hh3cCDRTotalSize | 1.3.6.1.4.1.25506.10.2.1.12.1.4 | Integer32 | read-only | This object identifies the total size of the Continuous Replication Resource. |
| I32 hh3cCDRFreeSize | 1.3.6.1.4.1.25506.10.2.1.12.1.5 | Integer32 | read-only | This object identifies the free size of the Continuous Replication Resource. |
| HH3 hh3cCDRSelectPolicy | 1.3.6.1.4.1.25506.10.2.1.12.1.6 | Hh3cExtendSelectPolicy | read-create | This object describes the policy about allocating the space for Continuous Replication Resource. |
| ROW hh3cCDRRowStatus | 1.3.6.1.4.1.25506.10.2.1.12.1.7 | RowStatus | read-create | This object identifies the action to create or delete the Continuous Replication Resource. |
| hh3cCDRDistributeTable | 1.3.6.1.4.1.25506.10.2.1.13 | not-accessible | This table contains some entity to config the distribution of Continuous Replication Resource. | |
| hh3cCDRDistributeEntry | 1.3.6.1.4.1.25506.10.2.1.13.1 | not-accessible | An entry containing some information applicable to the distribution of Continuous Replication Resource. | |
| HH3 hh3cCDRDistLvIndex | 1.3.6.1.4.1.25506.10.2.1.13.1.1 | Hh3cLvIDType | not-accessible | This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. |
| HH3 hh3cCDRRaidUuid | 1.3.6.1.4.1.25506.10.2.1.13.1.2 | Hh3cRaidIDType | not-accessible | This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. |
| I32 hh3cCDRRaidSize | 1.3.6.1.4.1.25506.10.2.1.13.1.3 | Integer32 | read-create | This object identifies the size on the special raid distributed for the Continuous Replication Resource. |
| ROW hh3cCDRExtRowStatus | 1.3.6.1.4.1.25506.10.2.1.13.1.4 | RowStatus | read-create | This object identifies the action to create the distribution for the Continuous Replication Resource. |
| hh3cSafeCacheConfigTable | 1.3.6.1.4.1.25506.10.2.1.14 | not-accessible | This table contains some entity to config SafeCache. | |
| hh3cSafeCacheConfigEntry | 1.3.6.1.4.1.25506.10.2.1.14.1 | not-accessible | An entry containing some information applicable to SafeCache of the logic volume. | |
| HH3 hh3cSafeCacheLvIndex | 1.3.6.1.4.1.25506.10.2.1.14.1.1 | Hh3cLvIDType | not-accessible | This object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cSafeCacheConfigTable can be created only when the associated hh3cSafeCacheDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cSafeCacheDistributeTable objects should be deleted automatically. |
| I32 hh3cSafeCacheID | 1.3.6.1.4.1.25506.10.2.1.14.1.2 | Integer32 | read-only | This object identifies a SafeCache. |
| HH3 hh3cSafeCacheStatus | 1.3.6.1.4.1.25506.10.2.1.14.1.3 | Hh3cStorageOnlineState | read-only | This object identifies the state of the SafeCache. |
| I32 hh3cSafeCacheTotalSize | 1.3.6.1.4.1.25506.10.2.1.14.1.4 | Integer32 | read-only | This object identifies the total size of the SafeCache. The units is million bytes. |
| I32 hh3cSafeCacheFreeSize | 1.3.6.1.4.1.25506.10.2.1.14.1.5 | Integer32 | read-only | This object identifies the free size of the SafeCache. The units is million bytes. |
| HH3 hh3cSafeCacheSelectPolicy | 1.3.6.1.4.1.25506.10.2.1.14.1.6 | Hh3cExtendSelectPolicy | read-create | This object describes the policy about allocating the space for SafeCache. |
| I32 hh3cSafeCacheThreshold | 1.3.6.1.4.1.25506.10.2.1.14.1.7 | Integer32 | read-create | This object identifies the maximal percentage of date changed before data flushing. |
| I32 hh3cSafeCacheFlushTime | 1.3.6.1.4.1.25506.10.2.1.14.1.8 | Integer32 | read-create | This object identifies the period during which the date can stay in cache before data flushing. The units is second. |
| I32 hh3cSafeCacheFlushCommand | 1.3.6.1.4.1.25506.10.2.1.14.1.9 | Integer32 | read-create | This object identifies the number of commands when data flushing. |
| INT hh3cSafeCacheSkipDupWrite | 1.3.6.1.4.1.25506.10.2.1.14.1.10 | INTEGER | read-create | This object identifies skip duplicate write commands or not. |
| INT hh3cSafeCacheRunStatus | 1.3.6.1.4.1.25506.10.2.1.14.1.11 | INTEGER | read-only | This object identifies the run state of the SafeCache. |
| INT hh3cSafeCacheSwitch | 1.3.6.1.4.1.25506.10.2.1.14.1.12 | INTEGER | read-create | This object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache. |
| ROW hh3cSafeCacheRowStatus | 1.3.6.1.4.1.25506.10.2.1.14.1.13 | RowStatus | read-create | This object identifies the action to create or delete the SafeCache. |
| hh3cSafeCacheDistributeTable | 1.3.6.1.4.1.25506.10.2.1.15 | not-accessible | This table contains some entity to config the SafeCache resource. | |
| hh3cSafeCacheDistributeEntry | 1.3.6.1.4.1.25506.10.2.1.15.1 | not-accessible | An entry containing some information applicable to SafeCache resource of the logic volume. | |
| HH3 hh3cSafeCacheDistLvIndex | 1.3.6.1.4.1.25506.10.2.1.15.1.1 | Hh3cLvIDType | not-accessible | This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. |
| HH3 hh3cSafeCacheRaidUuid | 1.3.6.1.4.1.25506.10.2.1.15.1.2 | Hh3cRaidIDType | not-accessible | This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. |
| I32 hh3cSafeCacheRaidSize | 1.3.6.1.4.1.25506.10.2.1.15.1.3 | Integer32 | read-create | This object identifies the size on the special raid distributed for the SafeCache resource. |
| ROW hh3cSafeCacheExtRowStatus | 1.3.6.1.4.1.25506.10.2.1.15.1.4 | RowStatus | read-create | This object identifies the action to create the distribution for the SafeCache resource. |
| hh3cMirrorConfigTable | 1.3.6.1.4.1.25506.10.2.1.16 | not-accessible | This table contains some entity to config mirror. | |
| hh3cMirrorConfigEntry | 1.3.6.1.4.1.25506.10.2.1.16.1 | not-accessible | An entry containing some information applicable to mirror for the logic volume. | |
| HH3 hh3cMirrorLvIndex | 1.3.6.1.4.1.25506.10.2.1.16.1.1 | Hh3cLvIDType | not-accessible | This object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cMirrorConfigTable can be created only when the associated hh3cMirrorDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cMirrorDistributeTable objects should be deleted automatically. |
| INT hh3cMirrorType | 1.3.6.1.4.1.25506.10.2.1.16.1.2 | INTEGER | read-only | This object identifies the type of the mirror. |
| HH3 hh3cMirrorStatus | 1.3.6.1.4.1.25506.10.2.1.16.1.3 | Hh3cStorageOnlineState | read-only | This object identifies the state of the mirror resource. |
| OCT hh3cMirrorName | 1.3.6.1.4.1.25506.10.2.1.16.1.4 | OCTET STRING | read-create | This object identifies the name of the mirror resource. it is used when promote mirror resource. |
| I32 hh3cMirrorSyncPercentage | 1.3.6.1.4.1.25506.10.2.1.16.1.5 | Integer32 | read-only | This object identifies the percentage of the mirror sync. |
| I32 hh3cMirrorSyncPerformance | 1.3.6.1.4.1.25506.10.2.1.16.1.6 | Integer32 | read-only | This object identifies the performance of the mirror sync. The unit is MB/S |
| I32 hh3cMirrorDelta | 1.3.6.1.4.1.25506.10.2.1.16.1.7 | Integer32 | read-only | This object identifies size of delta data after the last mirror sync. |
| INT hh3cMirrorRaidType | 1.3.6.1.4.1.25506.10.2.1.16.1.8 | INTEGER | read-create | This object identifies the raid type of the mirror resource. |
| HH3 hh3cMirrorSelectPolicy | 1.3.6.1.4.1.25506.10.2.1.16.1.9 | Hh3cExtendSelectPolicy | read-create | This object describes the policy about allocating the space for mirror resource. |
| INT hh3cMirrorSwitch | 1.3.6.1.4.1.25506.10.2.1.16.1.10 | INTEGER | read-create | This object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary resource and mirror resource. The value of 'promte' means break the mirrored pair and convert the mirror resource into an independent logic volume. The new logic volume will have all of the properties of a regular logic volume. Note that if the action of 'promte' is executed successfully, this mirror resource will become a primary logic volume, and this entry will be deleted automatically. |
| HH3 hh3cMirrorExtendRaidUuid | 1.3.6.1.4.1.25506.10.2.1.16.1.11 | Hh3cRaidIDType | read-create | This object identifies the raid of the mirror resource when the primary logic volume resource is extended. |
| ROW hh3cMirrorRowStatus | 1.3.6.1.4.1.25506.10.2.1.16.1.12 | RowStatus | read-create | This object identifies the action to create or delete the mirror resource. |
| hh3cMirrorDistributeTable | 1.3.6.1.4.1.25506.10.2.1.17 | not-accessible | This table contains some entity to config the mirror resource. | |
| hh3cMirrorDistributeEntry | 1.3.6.1.4.1.25506.10.2.1.17.1 | not-accessible | An entry containing some information applicable to mirror resource for the logic volume. | |
| HH3 hh3cMirrorDistLvIndex | 1.3.6.1.4.1.25506.10.2.1.17.1.1 | Hh3cLvIDType | not-accessible | This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. |
| HH3 hh3cMirrorRaidUuid | 1.3.6.1.4.1.25506.10.2.1.17.1.2 | Hh3cRaidIDType | not-accessible | This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. |
| I32 hh3cMirrorRaidSize | 1.3.6.1.4.1.25506.10.2.1.17.1.3 | Integer32 | read-create | This object identifies the size on the special raid distributed for the mirror resource. |
| ROW hh3cMirrorExtRowStatus | 1.3.6.1.4.1.25506.10.2.1.17.1.4 | RowStatus | read-create | This object identifies the action to create or delete the distribution for the mirror resource. |
RFC description
Huawei H3C vendor-private MIB for storage system snapshot and copy management.
Start monitoring H3C enterprise storage array/SAN (snapshot management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.