A3COM-HUAWEI-LswQos-MIB

All MIBs › A3COM-HUAWEI-LswQos-MIB

Organization: HUAWEI LANSWITCH

Last Updated: 2002-11-19

Category: Quality of Service, Vendor: H3C/HH3C

Description: Manages QoS queuing policies, traffic classification, and marking on H3C LAN switch platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-LswQos-MIB?

A3COM-HUAWEI-LswQos-MIB is an H3C/3Com proprietary module defining QoS queuing policy, traffic classification, and marking objects, together with related ACL integration, for LAN switch platforms, per its terse module_desc as a "module node for qos and acl." It is expected to expose queue-scheduling configuration, traffic-classifier and marking rule definitions, and per-queue/per-class traffic counters. As a QoS-focused MIB it primarily supports monitoring of the switch's traffic-management software behavior, confirming that classification and marking policies are active and observing per-class packet/byte and drop counts to spot congestion, rather than physical hardware state. Dependency: it works alongside standard ACL constructs and the vendor's other Lsw-prefixed switch MIBs for a complete switch-management picture. Deployment is on H3C LAN switches at the access/distribution layer applying differentiated QoS treatment to classified traffic flows. Network engineers evaluating or troubleshooting this functionality can download the A3COM-HUAWEI-LswQos-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-LswQos-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/3Com LAN switches

Monitoring Examples

No specific object or table names were provided in the sampled source for this module, so a concrete OID-level scenario is not given here to avoid inventing identifiers. In a typical deployment an admin would poll per-class queue statistics and drop counters to confirm a configured QoS/ACL marking policy is correctly prioritizing traffic, with rising drop counts on a particular queue indicating that class is oversubscribed relative to its configured bandwidth.

What Can Be Monitored

QoS queue scheduling configuration
traffic classification/marking rules
per-class packet and drop counters

Imported Objects

From A3COM-HUAWEI-OID-MIB

lswCommon

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hwRateLimitMeterStatByteCount OID:

Select an H3C/3Com LAN switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwRateLimitMeterStatByteCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The counter of conform byte. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT hwBandwidthAclIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.1	INTEGER	read-create	Index of acl rule.
INT hwBandwidthDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.4	INTEGER	read-create	Direction of data stream.
hwBandwidthEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1		not-accessible	Configuration information of bandwidth of port.
INT hwBandwidthIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.2	INTEGER	read-create	ifIndex of port.
INT hwBandwidthIpAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.5	INTEGER	read-create	The number of Ip acl.
INT hwBandwidthIpAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.6	INTEGER	read-create	The subitem of ip acl.
INT hwBandwidthLinkAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.7	INTEGER	read-create	The number of link acl.
INT hwBandwidthLinkAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.8	INTEGER	read-create	The subitem of link acl.
INT hwBandwidthMaxGuaranteedWidth	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.10	INTEGER	read-write	The max width which is guaranteed.
INT hwBandwidthMinGuaranteedWidth	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.9	INTEGER	read-write	The min width which is guaranteed.
ROW hwBandwidthRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.13	RowStatus	read-write	RowStatus, now support three status: createAndGo, active, destroy.
T/F hwBandwidthRuntime	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.12	TruthValue	read-only	Is run or not.
hwBandwidthTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11		not-accessible	Bandwidth.
INT hwBandwidthVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.3	INTEGER	read-create	Vlan ID.
INT hwBandwidthWeight	1.3.6.1.4.1.43.45.1.2.23.1.16.2.11.1.11	INTEGER	read-write	Weight of bandwidth.
INT hwCosToDropPrecedenceMapCosIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.21.1.1	INTEGER	read-only	Index of the map.
INT hwCosToDropPrecedenceMapDropPrecedenceValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.21.1.2	INTEGER	read-write	Value of drop-precedence.
hwCosToDropPrecedenceMapEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.21.1		not-accessible	Configuration information of the map of the COS to drop-precedence.
hwCosToDropPrecedenceMapTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.21		not-accessible	The table of map of COS to drop-precedence.
I32 hwCosToDscpMapCosIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.35.1.1	Integer32	not-accessible	COS index of COS to DSCP map.
I32 hwCosToDscpMapDscpValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.35.1.2	Integer32	read-write	DSCP value of COS to DSCP map.
hwCosToDscpMapEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.35.1		not-accessible	COS to DSCP map information.
INT hwCosToDscpMapReSet	1.3.6.1.4.1.43.45.1.2.23.1.16.2.35.1.3	INTEGER	read-write	This object is used to reset COS to DSCP map to default value. Read operation is meaningless.
hwCosToDscpMapTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.35		not-accessible	COS to DSCP map information.
INT hwCosToLocalPrecedenceMapCosIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.20.1.1	INTEGER	read-only	Index of the map.
hwCosToLocalPrecedenceMapEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.20.1		not-accessible	Configuration information of map of the COS to local precedence.
INT hwCosToLocalPrecedenceMapLocalPrecedenceValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.20.1.2	INTEGER	read-write	Value of local precedence.
hwCosToLocalPrecedenceMapTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.20		not-accessible	Table of map of the COS to local-precedence.
hwDropModeEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.18.1		not-accessible	Configuration information of the drop-mode.
INT hwDropModeIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.18.1.1	INTEGER	read-only	ifIndex of port.
INT hwDropModeMode	1.3.6.1.4.1.43.45.1.2.23.1.16.2.18.1.2	INTEGER	read-write	Mode.
hwDropModeTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.18		not-accessible	The drop-mode table which contains drop-mode entry.
INT hwDropModeWredIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.18.1.3	INTEGER	read-write	The index of Wred table.
INT hwDscpMapConformLevel	1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.1	INTEGER	read-only	Conformable level of Dscp-map.
INT hwDscpMapCosValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.5	INTEGER	read-write	COS value.
INT hwDscpMapDropPrecedence	1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.7	INTEGER	read-write	The precedence of Drop.
INT hwDscpMapDscpIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.2	INTEGER	read-only	Index of dscp.
INT hwDscpMapDscpValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.3	INTEGER	read-write	Value of Dscp.
hwDscpMapEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1		not-accessible	Configuration information of Dscp map.
INT hwDscpMapExpValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.4	INTEGER	read-write	Exp value.
INT hwDscpMapLocalPrecedence	1.3.6.1.4.1.43.45.1.2.23.1.16.2.22.1.6	INTEGER	read-write	The precedence of local.
hwDscpMapTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.22		not-accessible	Table of dscp map.
I32 hwDscpToCosMapCosValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.38.1.2	Integer32	read-write	COS value of DSCP to COS map.
I32 hwDscpToCosMapDscpIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.38.1.1	Integer32	not-accessible	DSCP index of DSCP to COS map.
hwDscpToCosMapEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.38.1		not-accessible	DSCP to COS map information.
INT hwDscpToCosMapReset	1.3.6.1.4.1.43.45.1.2.23.1.16.2.38.1.3	INTEGER	read-write	This object is used to reset DSCP to COS map to default value. Read operation is meaningless.
hwDscpToCosMapTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.38		not-accessible	DSCP to COS map information.
I32 hwDscpToDropPreMapDropPreVal	1.3.6.1.4.1.43.45.1.2.23.1.16.2.37.1.2	Integer32	read-write	Drop-precedence value of DSCP to Drop-precedence map.
I32 hwDscpToDropPreMapDscpIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.37.1.1	Integer32	not-accessible	DSCP Index of DSCP to Drop-precedence map.
hwDscpToDropPreMapEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.37.1		not-accessible	DSCP to Drop-precedence map information.
INT hwDscpToDropPreMapReset	1.3.6.1.4.1.43.45.1.2.23.1.16.2.37.1.3	INTEGER	read-write	This object is used to reset DSCP to Drop-precedence map to default value. Read operation is meaningless.
hwDscpToDropPreMapTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.37		not-accessible	DSCP to Drop-precedence map information.
I32 hwDscpToDscpMapDscpIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.39.1.1	Integer32	not-accessible	DSCP index of DSCP to DSCP map.
I32 hwDscpToDscpMapDscpValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.39.1.2	Integer32	read-write	DSCP value of DSCP to DSCP map.
hwDscpToDscpMapEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.39.1		not-accessible	DSCP to DSCP map information.
INT hwDscpToDscpMapReset	1.3.6.1.4.1.43.45.1.2.23.1.16.2.39.1.3	INTEGER	read-write	This object is used to reset DSCP to DSCP map to default value. Read operation is meaningless.
hwDscpToDscpMapTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.39		not-accessible	DSCP to DSCP map information.
I32 hwDscpToLocalPreMapDscpIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.36.1.1	Integer32	not-accessible	DSCP Index of DSCP to Local-precedence map.
hwDscpToLocalPreMapEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.36.1		not-accessible	DSCP to Local-precedence map information.
I32 hwDscpToLocalPreMapLocalPreVal	1.3.6.1.4.1.43.45.1.2.23.1.16.2.36.1.2	Integer32	read-write	Local-precedence value of DSCP to Local-precedence map.
INT hwDscpToLocalPreMapReset	1.3.6.1.4.1.43.45.1.2.23.1.16.2.36.1.3	INTEGER	read-write	This object is used to reset DSCP to Local-precedence map to default value. Read operation is meaningless.
hwDscpToLocalPreMapTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.36		not-accessible	DSCP to Local-precedence map information.
INT hwExpMapConformLevel	1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.1	INTEGER	read-only	Conformable level of Exp-map.
INT hwExpMapCosValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.5	INTEGER	read-write	COS Value.
INT hwExpMapDropPrecedence	1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.7	INTEGER	read-write	The precedence of Drop.
INT hwExpMapDscpValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.3	INTEGER	read-write	Dscp value.
hwExpMapEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1		not-accessible	Configuration information of Exp-map.
INT hwExpMapExpIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.2	INTEGER	read-only	Index of Exp.
INT hwExpMapExpValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.4	INTEGER	read-write	Exp value.
INT hwExpMapLocalPrecedence	1.3.6.1.4.1.43.45.1.2.23.1.16.2.23.1.6	INTEGER	read-write	The precedence of local.
hwExpMapTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.23		not-accessible	The table of Exp-map
T/F hwFlowtempCos	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.24	TruthValue	read-create	802.1P priority.
T/F hwFlowtempDIp	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.14	TruthValue	read-create	The Ip of destination.
IP hwFlowtempDIpMask	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.15	IpAddress	read-create	The mask of destination-Ip.
T/F hwFlowtempDMac	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.19	TruthValue	read-create	The mac of destination.
MAC hwFlowtempDMacMask	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.20	MacAddress	read-create	The mask of destination-Mac.
T/F hwFlowtempDPort	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.5	TruthValue	read-create	The port of destination.
T/F hwFlowtempDscp	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.9	TruthValue	read-create	Dscp of IP packet.
hwFlowtempEnableEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.15.1		not-accessible	Enable entry of flow-template.
INT hwFlowtempEnableFlowtempIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.15.1.3	INTEGER	read-write	The index of Flowtemp table.
INT hwFlowtempEnableIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.15.1.1	INTEGER	read-create	ifIndex of port.
hwFlowtempEnableTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.15		not-accessible	The table of flow-template.
INT hwFlowtempEnableVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.15.1.2	INTEGER	read-create	Vlan ID.
hwFlowtempEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1		not-accessible	Configuration information of flow-template.
T/F hwFlowtempEthProtocol	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.16	TruthValue	read-create	Protocol type of Ethernet.
T/F hwFlowtempFragment	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.8	TruthValue	read-create	The flag of Fragment.
T/F hwFlowtempIcmpCode	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.7	TruthValue	read-create	The code of Icmp.
T/F hwFlowtempIcmpType	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.6	TruthValue	read-create	The type of Icmp.
INT hwFlowtempIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.1	INTEGER	read-only	Index of flow template.
T/F hwFlowtempIpPre	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.10	TruthValue	read-create	The Precedence of Ip packet.
T/F hwFlowtempIpProtocol	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.2	TruthValue	read-create	protocol-type of IP packet.
ROW hwFlowtempRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.22	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
T/F hwFlowtempSIp	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.12	TruthValue	read-create	The Ip of source.
IP hwFlowtempSIpMask	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.13	IpAddress	read-create	The mask of source-Ip.
T/F hwFlowtempSMac	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.17	TruthValue	read-create	The Mac of source.
MAC hwFlowtempSMacMask	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.18	MacAddress	read-create	The mask of source-Mac.
T/F hwFlowtempSPort	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.4	TruthValue	read-create	The port of source.
hwFlowtempTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14		not-accessible	Flow-template table which contains flow-template entry.
T/F hwFlowtempTcpFlag	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.3	TruthValue	read-create	The flag of Tcp paceket.
T/F hwFlowtempTos	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.11	TruthValue	read-create	Tos of IP packet.
T/F hwFlowtempVlanId	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.23	TruthValue	read-create	Source VLAN ID.
T/F hwFlowtempVpn	1.3.6.1.4.1.43.45.1.2.23.1.16.2.14.1.21	TruthValue	read-create	Vpn
INT hwLineRateDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.10.1.2	INTEGER	read-create	The direction of line rate.
hwLineRateEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.10.1		not-accessible	Configuration information of line-rate port.
INT hwLineRateIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.10.1.1	INTEGER	read-create	The ifIndex of port of line rate.
ROW hwLineRateRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.10.1.4	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
hwLineRateTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.10		not-accessible	Line Rate.
INT hwLineRateValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.10.1.3	INTEGER	read-create	The value of the line-rate.
INT hwLocalPrecedenceMapConformLevel	1.3.6.1.4.1.43.45.1.2.23.1.16.2.24.1.1	INTEGER	read-only	Conformable level of local-precedence map.
INT hwLocalPrecedenceMapCosValue	1.3.6.1.4.1.43.45.1.2.23.1.16.2.24.1.3	INTEGER	read-write	COS value.
hwLocalPrecedenceMapEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.24.1		not-accessible	Configuraion information of local-precedence map.
INT hwLocalPrecedenceMapLocalPrecedenceIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.24.1.2	INTEGER	read-write	Index of local-precedence.
hwLocalPrecedenceMapTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.24		not-accessible	The table of local-precedence map.
hwLswQosAclMib	1.3.6.1.4.1.43.45.1.2.23.1.16			Module node for qos and acl.
hwLswQosMibObject	1.3.6.1.4.1.43.45.1.2.23.1.16.2
INT hwMirrorAclIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.1	INTEGER	read-create	Index of acl rule.
INT hwMirrorDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.4	INTEGER	read-create	Direction of data stream.
hwMirrorEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1		not-accessible	Configuration information to be mirrored.
INT hwMirrorGroupDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1.2	INTEGER	read-write	Direction of data stream which would be mirrored.
hwMirrorGroupEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1		not-accessible	Configuration information of mirroring group.
INT hwMirrorGroupID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1.1	INTEGER	read-only	Group ID of mirroring group.
OCT hwMirrorGroupMirrorIfIndexList	1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1.3	OCTET STRING	read-write	ifIndex list of source port.
INT hwMirrorGroupMonitorIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1.4	INTEGER	read-write	ifIndex of destination port.
ROW hwMirrorGroupRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.13.1.5	RowStatus	read-write	RowStatus, now support three status: createAndGo, active, destroy.
hwMirrorGroupTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.13		not-accessible	Mirror Group.
INT hwMirrorIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.2	INTEGER	read-create	ifIndex of port.
hwMirroringGroupEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.26.1		not-accessible	Configuration information of MirrorGroup.
INT hwMirroringGroupID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.26.1.1	INTEGER	not-accessible	GroupID.
ROW hwMirroringGroupMirroMacStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.31.1.4	RowStatus	read-create	The status of this conceptual row.
hwMirroringGroupMirrorEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1		not-accessible	MirroringGroup mirroring-port information.
OCT hwMirroringGroupMirrorInboundIfIndexList	1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1.1	OCTET STRING	read-create	Inbound-Mirror ifIndex(for port) and slot number(for board) list. Example A describes the relation between values of hwMirroringGroupMirrorInboundIfIndexList and hwMirroringGroupMirrorInTypeList. Example A: hwMirroringGroupMirrorInboundIfIndexList: '00000002 0C000022 00000007' hwMirroringGroupMirrorInTypeList: '00000002 00000001 00000002' Every four octets represent an integer value. The first four octets of them should be same. Here the value '00000002' indicates there are two inbound mirror sources. The following every four octets of hwMirroringGroupMirrorInboundIfIndexList indicate an ifIndex or a slot number of mirror source. For '0C000022' and '00000007' in the value of hwMirroringGroupMirrorInboundIfIndexList above, the corresponding value of hwMirroringGroupMirrorInTypeList is '00000001' and '00000002'(00000001 means the mirror source is port, 00000002 means the mirror source is board, the meaning reference the object HwMirrorOrMonitorType), then '0C000022' indicates an ifIndex value 201326626(decimal), and '00000007' indicates a slot with number 7(decimal). Values with different types(port/board) should be set in separate set operations. If one value with port type and one value with board type are set with same hwMirroringGroupID separately, the result of get operation for that entry will be like the example A above. If hwMirroringGroupMirrorInTypeList is not supported, the first four octets of hwMirroringGroupMirrorInboundIfIndexList also indicates the number of mirror source, but the following octets are values for ifIndex(port type). hwMirroringGroupMirrorOutboundIfIndexList and hwMirroringGroupMirrorOutTypeList are a pair and have the same relations like hwMirroringGroupMirrorInboundIfIndexList and hwMirroringGroupMirrorInTypeList pair.
OCT hwMirroringGroupMirrorInTypeList	1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1.4	OCTET STRING	read-create	Inbound-Mirror type list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.
MAC hwMirroringGroupMirrorMac	1.3.6.1.4.1.43.45.1.2.23.1.16.2.31.1.2	MacAddress	read-create	The MAC address of the MirroringGroup.
hwMirroringGroupMirrorMacEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.31.1		not-accessible	MirroringGroup MAC information.
I32 hwMirroringGroupMirrorMacSeq	1.3.6.1.4.1.43.45.1.2.23.1.16.2.31.1.1	Integer32	not-accessible	The sequence MAC number of the same group.
hwMirroringGroupMirrorMacTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.31		not-accessible	MirroringGroup MAC information.
OCT hwMirroringGroupMirrorOutboundIfIndexList	1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1.2	OCTET STRING	read-create	Outbound-Mirror ifIndex and slot number list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.
OCT hwMirroringGroupMirrorOutTypeList	1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1.5	OCTET STRING	read-create	Outbound-Mirror type list. Please refer to the description of hwMirroringGroupMirrorInboundIfIndexList.
ROW hwMirroringGroupMirrorRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.27.1.3	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
hwMirroringGroupMirrorTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.27		not-accessible	MirroringGroup mirroring-port information.
INT hwMirroringGroupMirrorVlanDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.32.1.3	INTEGER	read-create	The vlan direction of MirroringGroup.
hwMirroringGroupMirrorVlanEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.32.1		not-accessible	MirroringGroup Vlan Information.
I32 hwMirroringGroupMirrorVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.32.1.2	Integer32	read-create	The vlan ID of MirroringGroup.
I32 hwMirroringGroupMirrorVlanSeq	1.3.6.1.4.1.43.45.1.2.23.1.16.2.32.1.1	Integer32	not-accessible	The sequence vlan number of the same group.
hwMirroringGroupMirrorVlanTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.32		not-accessible	MirroringGroup Vlan Information.
ROW hwMirroringGroupMirroVlanStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.32.1.4	RowStatus	read-create	The status of this conceptual row.
hwMirroringGroupMonitorEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.28.1		not-accessible	MirroringGroup monitor-port information.
INT hwMirroringGroupMonitorIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.28.1.1	INTEGER	read-create	If the monitor destination is port, the value means the ifIndex of this port. If the monitor destination is board, the value means the slot number of the board. Whether the value means ifIndex or slot number references the object hwMirroringGroupMonitorType.
ROW hwMirroringGroupMonitorRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.28.1.2	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
hwMirroringGroupMonitorTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.28		not-accessible	MirroringGroup monitor-port information.
HWM hwMirroringGroupMonitorType	1.3.6.1.4.1.43.45.1.2.23.1.16.2.28.1.3	HwMirrorOrMonitorType	read-create	Specify whether the monitor destination is port or board. If this object is not supported, then the value of hwMirroringGroupMonitorIfIndex means ifIndex.
hwMirroringGroupReflectorEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.29.1		not-accessible	MirroringGroup reflector-port information.
INT hwMirroringGroupReflectorIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.29.1.1	INTEGER	read-create	Only valid for remote-source MirroringGroup.
ROW hwMirroringGroupReflectorRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.29.1.2	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
hwMirroringGroupReflectorTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.29		not-accessible	MirroringGroup reflector-port information.
ROW hwMirroringGroupRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.26.1.4	RowStatus	read-create	RowStatus, Now support three status: createAndGo, active, destroy.
hwMirroringGroupRprobeVlanEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.30.1		not-accessible	MirroringGroup rprobe-vlan information.
INT hwMirroringGroupRprobeVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.30.1.1	INTEGER	read-create	Remote-Probe vlanID. 0 is invalid value. Only valid for remote-source and remote-destination MirroringGroup.
ROW hwMirroringGroupRprobeVlanRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.30.1.2	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
hwMirroringGroupRprobeVlanTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.30		not-accessible	MirroringGroup rprobe-vlan information.
INT hwMirroringGroupStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.26.1.3	INTEGER	read-only	MirroringGroup status.
hwMirroringGroupTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.26		not-accessible	The table of MirrorGroup.
INT hwMirroringGroupType	1.3.6.1.4.1.43.45.1.2.23.1.16.2.26.1.2	INTEGER	read-create	GroupType.
INT hwMirrorIpAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.7	INTEGER	read-create	The subitem of the user acl.
INT hwMirrorIpAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.8	INTEGER	read-create	The subitem of the IP acl.
INT hwMirrorLinkAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.9	INTEGER	read-create	The number of the link acl.
INT hwMirrorLinkAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.10	INTEGER	read-create	The subitem of the link acl.
I32 hwMirrorMacVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.31.1.3	Integer32	read-create	The vlan ID of MAC address .
ROW hwMirrorRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.14	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
T/F hwMirrorRuntime	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.13	TruthValue	read-only	Is run or not.
hwMirrorTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8		not-accessible	Mirror table which contains mirror entry.
T/F hwMirrorToCpu	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.12	TruthValue	read-create	Mirror to cpu.
I32 hwMirrorToGroup	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.15	Integer32	read-create	The destination of stream-based mirroring is the mirroring group.
INT hwMirrorToIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.11	INTEGER	read-create	The ifIndex of port that to be mirrored to.
INT hwMirrorUserAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.5	INTEGER	read-create	The number of the user acl.
INT hwMirrorUserAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.6	INTEGER	read-create	The subitem of the user acl.
INT hwMirrorVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.8.1.3	INTEGER	read-create	Vlan ID.
INT hwPortMirrorDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.9.1.2	INTEGER	read-create	The direction of mirror port.
hwPortMirrorEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.9.1		not-accessible	Configuration information of port mirroring.
INT hwPortMirrorIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.9.1.1	INTEGER	read-create	The ifIndex of mirror port.
ROW hwPortMirrorRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.9.1.3	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
hwPortMirrorTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.9		not-accessible	Port Mirror.
INT hwPortMonitorBothIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.2	INTEGER	read-write	The ifIndex of in/out monitor port.
hwPortQueueEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.17.1		not-accessible	Configuration information of port-queue.
INT hwPortQueueIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.17.1.1	INTEGER	read-only	ifIndex of port.
INT hwPortQueueQueueID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.17.1.2	INTEGER	read-only	ID of port-queue.
hwPortQueueTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.17		not-accessible	The port-queue table which contains port-queue entry.
INT hwPortQueueWeight	1.3.6.1.4.1.43.45.1.2.23.1.16.2.17.1.4	INTEGER	read-write	The weight of this queue.
INT hwPortQueueWrrPriority	1.3.6.1.4.1.43.45.1.2.23.1.16.2.17.1.3	INTEGER	read-write	The priority of Wrr.
hwPortTrustEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.33.1		not-accessible	Port trust information.
I32 hwPortTrustIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.33.1.1	Integer32	not-accessible	ifIndex of the port which port trust is configured.
INT hwPortTrustOvercastType	1.3.6.1.4.1.43.45.1.2.23.1.16.2.33.1.3	INTEGER	read-write	Overcast type of port trust.
INT hwPortTrustReset	1.3.6.1.4.1.43.45.1.2.23.1.16.2.33.1.4	INTEGER	read-write	This object is used to reset port trust to default value. Read operation is meaningless.
hwPortTrustTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.33		not-accessible	Port trust information.
INT hwPortTrustTrustType	1.3.6.1.4.1.43.45.1.2.23.1.16.2.33.1.2	INTEGER	read-write	Trust type of port trust.
hwPortWredEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.25.1		not-accessible	Configuration information of port Wred.
INT hwPortWredIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.25.1.1	INTEGER	read-only	ifIndex of port.
INT hwPortWredQueueID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.25.1.2	INTEGER	read-only	ID of port-Wred queue.
INT hwPortWredQueueProbability	1.3.6.1.4.1.43.45.1.2.23.1.16.2.25.1.4	INTEGER	read-write	Probability.
INT hwPortWredQueueStartLength	1.3.6.1.4.1.43.45.1.2.23.1.16.2.25.1.3	INTEGER	read-write	Queue length.
hwPortWredTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.25		not-accessible	The table of PortWred.
INT hwPriorityAclIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.1	INTEGER	read-create	Index of acl rule.
INT hwPriorityCos	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.14	INTEGER	read-create	Set vlan priority.
T/F hwPriorityCosFromIpPre	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.15	TruthValue	read-create	Set vlan priority according to IP precedence.
INT hwPriorityDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.4	INTEGER	read-create	Direction of data stream.
INT hwPriorityDscp	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.11	INTEGER	read-create	Set DSCP Value. Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
hwPriorityEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1		not-accessible	The configuration information of priority.
INT hwPriorityIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.2	INTEGER	read-create	ifIndex of the port.
INT hwPriorityIpAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.7	INTEGER	read-create	The number of Ip acl.
INT hwPriorityIpAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.8	INTEGER	read-create	The subitem of the IP acl.
INT hwPriorityIpPre	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.12	INTEGER	read-create	Set Ip precedence.
T/F hwPriorityIpPreFromCos	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.13	TruthValue	read-create	Set Ip precedence according to vlan priority.
INT hwPriorityLinkAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.9	INTEGER	read-create	The number of Link acl.
INT hwPriorityLinkAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.10	INTEGER	read-create	The subitem of the link acl.
INT hwPriorityLocalPre	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.16	INTEGER	read-create	Set local precedence.
INT hwPriorityPolicedServiceCos	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.20	INTEGER	read-create	The service COS of proliced Priority.
INT hwPriorityPolicedServiceDropPriority	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.22	INTEGER	read-create	The service drop priority of proliced Priority.
INT hwPriorityPolicedServiceDscp	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.18	INTEGER	read-create	The service Dscp of proliced Priority.
INT hwPriorityPolicedServiceExp	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.19	INTEGER	read-create	The service Exp of proliced Priority.
INT hwPriorityPolicedServiceLoaclPre	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.21	INTEGER	read-create	The service local pre of proliced Priority.
INT hwPriorityPolicedServiceType	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.17	INTEGER	read-create	The service type of proliced Priority.
ROW hwPriorityRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.24	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
T/F hwPriorityRuntime	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.23	TruthValue	read-only	Is run or not.
hwPriorityTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5		not-accessible	The priority table which contains priority entry.
INT hwPriorityTrustMode	1.3.6.1.4.1.43.45.1.2.23.1.16.2.1	INTEGER	read-write	Priority type of inbound queue.
INT hwPriorityUserAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.5	INTEGER	read-create	The number of user acl.
INT hwPriorityUserAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.6	INTEGER	read-create	The subitem of the user acl.
INT hwPriorityVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.5.1.3	INTEGER	read-create	Vlan ID.
hwQueueEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1		not-accessible	The configuration information of queue.
INT hwQueueIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.1	INTEGER	read-only	ifIndex of port.
INT hwQueueMaxDelay	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.7	INTEGER	read-write
INT hwQueueScheduleMode	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.2	INTEGER	read-write	The mode of the queue schedule.
hwQueueTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3		not-accessible	Queue table which contains queue entry.
INT hwQueueWeight1	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.3	INTEGER	read-write	If queue mode is wfq, then hwQueueWeight1 represent the bandwidth of queue 1. If queue mode is wrr, then hwQueueWeight1 represent the weight of queue 1.
INT hwQueueWeight2	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.4	INTEGER	read-write	If queue mode is wfq, then hwQueueWeight2 represent the bandwidth of queue 2. If queue mode is wrr, then hwQueueWeight2 represent the weight of queue 2.
INT hwQueueWeight3	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.5	INTEGER	read-write	If queue mode is wfq, then hwQueueWeight3 represent the bandwidth of queue 3. If queue mode is wrr, then hwQueueWeight3 represent the weight of queue 3.
INT hwQueueWeight4	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.6	INTEGER	read-write	If queue mode is wfq, then hwQueueWeight4 represent the bandwidth of queue 4. If queue mode is wrr, then hwQueueWeight4 represent the weight of queue 4.
INT hwQueueWeight5	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.8	INTEGER	read-write	If queue mode is wfq, then hwQueueWeight5 represent the bandwidth of queue 5. If queue mode is wrr, then hwQueueWeight5 represent the weight of queue 5.
INT hwQueueWeight6	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.9	INTEGER	read-write	If queue mode is wfq, then hwQueueWeight6 represent the bandwidth of queue 6. If queue mode is wrr, then hwQueueWeight6 represent the weight of queue 6.
INT hwQueueWeight7	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.10	INTEGER	read-write	If queue mode is wfq, then hwQueueWeight7 represent the bandwidth of queue 7. If queue mode is wrr, then hwQueueWeight7 represent the weight of queue 7.
INT hwQueueWeight8	1.3.6.1.4.1.43.45.1.2.23.1.16.2.3.1.11	INTEGER	read-write	If queue mode is wfq, then hwQueueWeight8 represent the bandwidth of queue 8. If queue mode is wrr, then hwQueueWeight8 represent the weight of queue 8.
INT hwRateLimitAclIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.1	INTEGER	read-create	Index of acl rule.
INT hwRateLimitCBS	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.15	INTEGER	read-create	Burst traffic of the rate-limited port.
INT hwRateLimitCIR	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.14	INTEGER	read-create	CIR of the rate-limited port.
INT hwRateLimitConformActionType	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.19	INTEGER	read-create	Conform action type.
INT hwRateLimitConformCos	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.25	INTEGER	read-create	If the user choose remark-cos value of the hwRateLimitConformActionType, This object can be used to set the conform COS value. There are a few enumerations as follows: background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6)
INT hwRateLimitConformDscp	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.26	INTEGER	read-create	If the user choose remark-dscp value of the hwRateLimitConformActionType, This object can be used to set the conform dscp value. There are a few enumerations as follows: Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
INT hwRateLimitConformLocalPre	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.18	INTEGER	read-create	Conform local pre.
INT hwRateLimitDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.4	INTEGER	read-create	Direction of the rate-limited port.
INT hwRateLimitEBS	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.16	INTEGER	read-create	Excess burst traffic of the rate-limited port.
hwRateLimitEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1		not-accessible	The configuration information of the rate-limited port.
INT hwRateLimitExceedActionType	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.20	INTEGER	read-create	Exceed action type.
INT hwRateLimitExceedCos	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.24	INTEGER	read-create	Exceeding COS of rate-limited port.
INT hwRateLimitExceedDscp	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.21	INTEGER	read-create	Exceed DSCP. Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
INT hwRateLimitIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.2	INTEGER	read-create	ifIndex of the rate-limited port.
INT hwRateLimitIpAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.7	INTEGER	read-create	The number of Ip acl.
INT hwRateLimitIpAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.8	INTEGER	read-create	The number of Ip acl-rule.
INT hwRateLimitLinkAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.9	INTEGER	read-create	The number of link acl.
INT hwRateLimitLinkAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.10	INTEGER	read-create	The number of link acl-rule.
C64 hwRateLimitMeterStatByteCountEx	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.27	Counter64	read-only	The counter of conform byte.
C64 hwRateLimitMeterStatByteXCount	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.28	Counter64	read-only	The counter of exceed byte.
INT hwRateLimitMeterStatState	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.29	INTEGER	read-create	The status of meter statistic.
INT hwRateLimitPeakRate	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.13	INTEGER	read-create	Peak rate of the rate-limited port.
INT hwRateLimitPIR	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.17	INTEGER	read-create	PIR of the rate-limited port.
ROW hwRateLimitRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.23	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
T/F hwRateLimitRuntime	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.22	TruthValue	read-only	Runtime.
hwRateLimitTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4		not-accessible	Rate limit table which contains limit entry.
INT hwRateLimitTargetRateKbps	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.12	INTEGER	read-create	Target rate: Kbps.
INT hwRateLimitTargetRateMbps	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.11	INTEGER	read-create	Target rate: Mbps.
INT hwRateLimitUserAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.5	INTEGER	read-create	The number of user acl.
INT hwRateLimitUserAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.6	INTEGER	read-create	The number of user acl-rule.
INT hwRateLimitVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.4.1.3	INTEGER	read-create	Vlan ID.
INT hwRedAclIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.1	INTEGER	read-create	Index of acl rule.
INT hwRedDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.4	INTEGER	read-create	Direction of data stream.
hwRedEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1		not-accessible	Configuration information of RED.
INT hwRedIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.2	INTEGER	read-create	ifIndex of port.
INT hwRedIpAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.5	INTEGER	read-create	The num of Ip acl.
INT hwRedIpAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.6	INTEGER	read-create	The subitem of Ip acl.
INT hwRedirectAclIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.1	INTEGER	read-create	Index of acl rule.
INT hwRedirectDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.4	INTEGER	read-create	Direction of data stream.
hwRedirectEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1		not-accessible	Configuration information of redirection.
INT hwRedirectIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.2	INTEGER	read-create	ifIndex of port.
INT hwRedirectIpAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.7	INTEGER	read-create	The num of the IP acl.
INT hwRedirectIpAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.8	INTEGER	read-create	The subitem of the IP acl.
INT hwRedirectLinkAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.9	INTEGER	read-create	The num of the link acl.
INT hwRedirectLinkAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.10	INTEGER	read-create	The subitem of the link acl.
INT hwRedirectMode	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.23	INTEGER	read-create	The node denotes the strategy adopted by the PBR. If strict-priority is configured, the most preferential IP address is use as redirected nexthop. If the mode is load-balance, any of the three IP addresses will be the nexthop and the traffic distributes in the three direction. Default value is strict-priority. When L3plus function is not supported, the default value would be set. It is optional.
INT hwRedirectRemarkedDSCP	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.18	INTEGER	read-create	DSCP of Policy-Based Routing. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
INT hwRedirectRemarkedPri	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.19	INTEGER	read-create	The priority of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
INT hwRedirectRemarkedTos	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.20	INTEGER	read-create	The TOS of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
ROW hwRedirectRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.16	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
T/F hwRedirectRuntime	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.15	TruthValue	read-only	Is run or not.
hwRedirectTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6		not-accessible	Redirect table which contains rediect entry.
INT hwRedirectTargetVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.22	INTEGER	read-create	The destination vlan ID for PBR. Default value is 0. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary when no nexthop is set.
T/F hwRedirectToCpu	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.11	TruthValue	read-create	Redirect to cpu.
INT hwRedirectToIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.12	INTEGER	read-create	The ifIndex of port to be redirect to.
I32 hwRedirectToModifiedVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.25	Integer32	read-create	The new vlan ID replaced the old one. Default value is 0. When the function is not supported, the default value would be set. It is optional.
I32 hwRedirectToNestedVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.24	Integer32	read-create	The nested vlan ID inserted before the original vlan tag. Default value is 0. When the function is not supported, the default value would be set. It is optional.
IP hwRedirectToNextHop1	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.13	IpAddress	read-create
IP hwRedirectToNextHop2	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.14	IpAddress	read-create
IP hwRedirectToNextHop3	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.21	IpAddress	read-create	The third IP address for PBR. Default value is 0xffffffff. When L3plus function is not supported, the default value would be set. The data stream can be redirected to three nexthops at most or one VLAN interface, one nexthop should be set at least if data packets are not redirected to VLAN interface for L3plus redirection function.
INT hwRedirectToSlotNo	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.17	INTEGER	read-create	The slot number to process redirection. Default value is 15. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary.
INT hwRedirectUserAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.5	INTEGER	read-create	The number of the user acl.
INT hwRedirectUserAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.6	INTEGER	read-create	The subitem of the user acl.
INT hwRedirectVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.6.1.3	INTEGER	read-create	Vlan ID.
INT hwRedLinkAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.7	INTEGER	read-create	The number of link acl.
INT hwRedLinkAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.8	INTEGER	read-create	The subitem of link acl.
INT hwRedProbability	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.11	INTEGER	read-write	Probability.
ROW hwRedRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.13	RowStatus	read-write	RowStatus, now support three status: createAndGo, active, destroy.
T/F hwRedRuntime	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.12	TruthValue	read-only	Is run or not.
INT hwRedStartQueueLen	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.9	INTEGER	read-write	The length of Starting queue.
INT hwRedStopQueueLen	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.10	INTEGER	read-write	The length of stopping queue.
hwRedTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12		not-accessible	Red table which contains RED entry.
INT hwRedVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.12.1.3	INTEGER	read-create	Vlan ID.
I32 hwRemarkVlanIDAclIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.1	Integer32	not-accessible	Action identifier, acl index.
INT hwRemarkVlanIDDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.4	INTEGER	not-accessible	Action identifier, direction of data stream.
hwRemarkVlanIDEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1		not-accessible	Remark vlan ID information.
I32 hwRemarkVlanIDIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.2	Integer32	not-accessible	Action identifier, ifIndex.
I32 hwRemarkVlanIDIpAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.7	Integer32	read-create	The num of the IP acl.
I32 hwRemarkVlanIDIpAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.8	Integer32	read-create	The subitem of the IP acl.
I32 hwRemarkVlanIDLinkAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.9	Integer32	read-create	The num of the link acl.
I32 hwRemarkVlanIDLinkAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.10	Integer32	read-create	The subitem of the link acl.
INT hwRemarkVlanIDPacketType	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.12	INTEGER	read-create	Packet type of the remarked vlan ID.
I32 hwRemarkVlanIDRemarkVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.11	Integer32	read-create	Remark vlan ID.
ROW hwRemarkVlanIDRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.13	RowStatus	read-create	The status of this conceptual row.
hwRemarkVlanIDTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34		not-accessible	Remark vlan ID information.
I32 hwRemarkVlanIDUserAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.5	Integer32	read-create	The number of the user acl.
I32 hwRemarkVlanIDUserAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.6	Integer32	read-create	The subitem of the user acl.
I32 hwRemarkVlanIDVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.34.1.3	Integer32	not-accessible	Action identifier, vlan ID.
INT hwStatisticAclIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.1	INTEGER	read-create	Index of acl rule.
C64 hwStatisticByteCount	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.13	Counter64	read-only	The counter of the byte which is matched.
C64 hwStatisticByteXCount	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.17	Counter64	read-only	The counter of the outprofile bytes.
INT hwStatisticCountClear	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.14	INTEGER	read-write	Clear the counter of the packets.
INT hwStatisticDirection	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.4	INTEGER	read-create	Direction of data stream.
hwStatisticEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1		not-accessible	Configuration about statistic information.
INT hwStatisticIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.2	INTEGER	read-create	ifIndex of port.
INT hwStatisticIpAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.7	INTEGER	read-create	The number of the IP acl.
INT hwStatisticIpAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.8	INTEGER	read-create	The subitem of the IP acl.
INT hwStatisticLinkAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.9	INTEGER	read-create	The number of the link acl.
INT hwStatisticLinkAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.10	INTEGER	read-create	The subitem of the link acl.
C64 hwStatisticPacketCount	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.12	Counter64	read-only	The counter of the packets which is matched.
C64 hwStatisticPacketXCount	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.16	Counter64	read-only	The counter of the outprofile packets.
ROW hwStatisticRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.15	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
T/F hwStatisticRuntime	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.11	TruthValue	read-only	Is run or not.
hwStatisticTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7		not-accessible	Statistic table which contains statistic entry.
INT hwStatisticUserAclNum	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.5	INTEGER	read-create	The number of the user acl.
INT hwStatisticUserAclRule	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.6	INTEGER	read-create	The subitem of the user acl.
INT hwStatisticVlanID	1.3.6.1.4.1.43.45.1.2.23.1.16.2.7.1.3	INTEGER	read-create	Vlan ID.
INT hwTrafficShapeBufferLimit	1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.5	INTEGER	read-create	The limit of buffer.
INT hwTrafficShapeBurstSize	1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.4	INTEGER	read-create	The size of burst.
hwTrafficShapeEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1		not-accessible	Configuration information of traffic-shape.
INT hwTrafficShapeIfIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.1	INTEGER	read-create	IfIdex of port.
INT hwTrafficShapeMaxRate	1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.3	INTEGER	read-create	The max rate.
INT hwTrafficShapeQueueId	1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.2	INTEGER	read-create	ID of queue which would be shaped.
ROW hwTrafficShapeRowStatus	1.3.6.1.4.1.43.45.1.2.23.1.16.2.16.1.6	RowStatus	read-create	RowStatus, now support three status: createAndGo, active, destroy.
hwTrafficShapeTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.16		not-accessible	The traffic-shape table which contains traffic-shape entry.
hwWredEntry	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1		not-accessible	Configuration information of Wred.
INT hwWredExponent	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.12	INTEGER	read-write	Exponent.
INT hwWredGreenMaxProb	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.5	INTEGER	read-write	The max prob of Green.
INT hwWredGreenMaxThreshold	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.4	INTEGER	read-write	The max threshold of Greem.
INT hwWredGreenMinThreshold	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.3	INTEGER	read-write	The min threshold of Green.
INT hwWredIndex	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.1	INTEGER	read-only	Index of wred.
INT hwWredQueueId	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.2	INTEGER	read-only	Queue ID.
INT hwWredRedMaxProb	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.11	INTEGER	read-write	The max prob of Red.
INT hwWredRedMaxThreshold	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.10	INTEGER	read-write	The max threshold of Red.
INT hwWredRedMinThreshold	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.9	INTEGER	read-write	The min threshold of Red.
hwWredTable	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19		not-accessible	The Wred table which contains wred Entry.
INT hwWredYellowMaxProb	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.8	INTEGER	read-write	The Prob threshold of Yellow.
INT hwWredYellowMaxThreshold	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.7	INTEGER	read-write	The max threshold of Yellow.
INT hwWredYellowMinThreshold	1.3.6.1.4.1.43.45.1.2.23.1.16.2.19.1.6	INTEGER	read-write	The min threshold of Yellow.

RFC description

Huawei/3COM proprietary MIB for LAN switch Quality of Service (QoS) configuration, including traffic policing, queue scheduling, and mirroring management.

Start monitoring H3C/3Com LAN switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-LswQos-MIB