HPN-ICF-DOT11-LIC-MIB

All MIBs › HPN-ICF-DOT11-LIC-MIB

Last Updated: 2012-04-25

Category: Technology: Wireless, Vendor: H3C/HH3C, Vendor: HP/HPE, Wireless and WLAN

Description: HP Networking ICF SNMP MIB for 802.11 wireless access point license management and capacity control on HP WLAN devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-DOT11-LIC-MIB?

HPN-ICF-DOT11-LIC-MIB is an HPE/H3C Comware ICF private MIB for managing 802.11 wireless licensing on an Access Controller (AC) that centrally manages "Fit" access points in a wireless LAN deployment. It exposes the AC's license serial number and keys (hpnicfDot11LICSerialNumber, LicenseKey, ActivationKey), the default/current/maximum permitted AP counts (DefautAPNumPermit, CurrentAPNumPermit, MaxAPNumPermit), and a per-license table (hpnicfDot11LICApNumLicTable/Entry) tracking individual license entries and their AP allotment. Rather than hardware sensors, its monitoring role is software/licensing status: confirming how many APs are currently licensed versus the maximum allowed, and detecting when an AC approaches or exceeds its licensed AP capacity. This matters operationally because an AC at its license ceiling will refuse to bring additional access points online. It depends on the broader 802.11 WLAN management framework used by HPE/H3C Comware ACs and is deployed in centralized WLAN controller architectures with Fit APs. Engineers can download the HPN-ICF-DOT11-LIC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-DOT11-LIC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HPE/H3C Comware WLAN Access Controllers

Monitoring Examples

A wireless administrator polls hpnicfDot11LICCurrentAPNumPermit against hpnicfDot11LICMaxAPNumPermit to see how close the controller is to its licensed AP capacity, and checks hpnicfDot11LICApNumLicTable to review individual license keys and their allotted AP counts. If CurrentAPNumPermit approaches MaxAPNumPermit, that signals the need to apply an additional hpnicfDot11LICLicenseKey before new APs can join. hpnicfDot11LICSerialNumber and hpnicfDot11LICActivationKey would also be checked to confirm the AC's license was activated correctly.

What Can Be Monitored

current vs. maximum licensed AP count
license key/serial number status
per-license AP allotment
license activation status

Imported Objects

From HPN-ICF-DOT11-REF-MIB

hpnicfDot11

MODULE-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfDot11LIC	1.3.6.1.4.1.11.2.14.11.15.2.75.14			This MIB provides information for WLAN license configuration in AC. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
hpnicfDot11LICConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.14.1
OCT hpnicfDot11LICSerialNumber	1.3.6.1.4.1.11.2.14.11.15.2.75.14.1.1	OCTET STRING	read-only	The device serial number.
T/F hpnicfDot11LicApNumGroupSupport	1.3.6.1.4.1.11.2.14.11.15.2.75.14.1.2	TruthValue	read-only	Represents support hpnicfDot11LicApNumGroup 'ture': device spport hpnicfDot11LicApNumGroup. 'false': device not spport hpnicfDot11LicApNumGroupp.
hpnicfDot11LICApNumGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2
hpnicfDot11LICApNumAttrTable	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.1
I32 hpnicfDot11LICDefautAPNumPermit	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.1.1	Integer32	read-only	Represents the number of AP connection permitted for one AC without license.
I32 hpnicfDot11LICCurrentAPNumPermit	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.1.2	Integer32	read-only	Represents the total number of AP connection permitted for one AC, include default number and the licenses that installed.
I32 hpnicfDot11LICMaxAPNumPermit	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.1.3	Integer32	read-only	Represents the maximum number of AP to support connection permitted for one AC, include default number and full licenses.
hpnicfDot11LICApNumLicTable	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2		not-accessible	Each entry contains license information of ap number.
hpnicfDot11LICApNumLicEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2.1		not-accessible	Each entry contains association information of each station.
I32 hpnicfDot11LICLicenseKeyIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2.1.1	Integer32	read-only	Licensed key index value.
OCT hpnicfDot11LICLicenseKey	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2.1.2	OCTET STRING	read-only	Specifies a certain license key.
OCT hpnicfDot11LICActivationKey	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2.1.3	OCTET STRING	read-only	Specifies a certain activation key.
I32 hpnicfDot11LICApNum	1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2.1.4	Integer32	read-only	Represents support connect ap number of the license.
hpnicfDot11LICFeatureGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3
hpnicfDot11LICFeatureAttrTable	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1		not-accessible	Each entry contains attribute information of wlan feature.
hpnicfDot11LICFeatureAttrEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1.1		not-accessible	Each entry contains feature attribute information of licensetypename.
I32 hpnicfDot11LICAttrIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1.1.1	Integer32	read-only	Attribute index value.
OCT hpnicfDot11LICAttrTypeName	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1.1.2	OCTET STRING	read-only	Represents attribute type name
I32 hpnicfDot11LICAttrDefVal	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1.1.3	Integer32	read-only	Represents the default value of the license type.
I32 hpnicfDot11LICAttrMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1.1.4	Integer32	read-only	Represents the maximum value of the license type.
hpnicfDot11LICFeatureLicTable	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2		not-accessible	Each entry contains license information of wlan feature.
hpnicfDot11LICFeatureLicEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1		not-accessible	Each entry contains wlan feature information of license.
I32 hpnicfDot11LICKeyIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1.1	Integer32	read-only	Licensed key index value.
OCT hpnicfDot11LICTypeName	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1.2	OCTET STRING	read-only	Represents the type name of the license entry.
OCT hpnicfDot11LICKey	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1.3	OCTET STRING	read-only	Specifies a certain license key.
I32 hpnicfDot11LICTimeLimit	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1.4	Integer32	read-only	Represents available time left of the license entry.
I32 hpnicfDot11LICValue	1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1.5	Integer32	read-only	Represents the value of the license entry. If hpnicfDot11LICFeatureTypeName is 'AP', this meaning of ap number, and so no.

RFC description

Provides WLAN license configuration and management for wireless access controllers (AC).

Start monitoring HPE/H3C Comware WLAN Access Controller (AP license management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-DOT11-LIC-MIB

What Is HPN-ICF-DOT11-LIC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description