HP-OPENCALL-SS7SNMPAGENT-BASE-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HP-OPENCALL-SS7SNMPAGENT-BASE-MIB

Organization: Hewlett Packard Company, OpenCall Business Unit

Last Updated: 2004-09-09

Category: Domain: Telephony/VoIP, Vendor: HP/HPE

Description: HP OpenCall SS7 SNMP agent base MIB defining objects for managing the HP OpenCall signaling platform connected to SS7 telecom networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-OPENCALL-SS7SNMPAGENT-BASE-MIB?

HP-OPENCALL-SS7SNMPAGENT-BASE-MIB is a Hewlett-Packard private MIB for the HP OpenCall SS7 signaling platform, a telecom middleware product connecting to SS7 (Signaling System 7) networks for services like ISUP call control. Rather than tabular counters, it is built almost entirely around NOTIFICATION-TYPE trap definitions carrying a fixed set of alarm objects — sourcePlatformEntity, sourceObjectID, perceveidSeverity, alarmText, probableCause, correctiveAction, and htimeStamp — used to report platform and protocol-stack faults. Defined traps cover conditions such as ISUP continuity test failures (hHPOC-3100155), FTC (fault-tolerant control) process switch-overs and process-down events (hHPOC-8400084 through hHPOC-8400088), and MTP Level 3 synchronization aborts in the ss7Stack-mtp component (hHPOC-9000332/9000334). It depends on the underlying OpenCall platform's process-pair redundancy model and SS7 stack, and is deployed on HP OpenCall signaling nodes in carrier telecom networks where administrators use HP-OPENCALL-SS7SNMPAGENT-BASE-MIB download packages to integrate these traps into their fault management systems.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-OPENCALL-SS7SNMPAGENT-BASE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • HP OpenCall SS7 signaling gateways

Monitoring Examples

An operator subscribes to hHPOC-8400085/hHPOC-8400086 traps to detect when the active or standby FTC process goes down, cross-referencing perceveidSeverity and probableCause; repeated hHPOC-9000332 MTPL3 SYNCHRO ABORTED traps alongside a Major severity would indicate SS7 link-level synchronization problems threatening call signaling availability.

What Can Be Monitored

  • ISUP continuity test failure traps
  • FTC process switch-over/down/active/hotstandby state traps
  • MTP Level 3 synchronization abort traps
  • trap severity and probable-cause fields
  • source platform/object identification fields
Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
OIDs

RFC description

Manages OpenCall SS7 SNMP agent event traps and alarm notifications.

Start monitoring HP OpenCall SS7 signaling gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-OPENCALL-SS7SNMPAGENT-BASE-MIB