BCS-IDENT-MIB

All MIBs › BCS-IDENT-MIB

Organization: Motorola Broadband Home Solutions

Last Updated: 2010-08-25

Category: Hardware and Environment

Description:

Provides device identification and inventory objects for Belden/Hirschmann industrial Ethernet switches.

Imported Objects

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

What Is BCS-IDENT-MIB?

BCS-IDENT-MIB is an industrial-networking identification module (originating from Motorola's BCS line and carried forward through Belden/Hirschmann industrial Ethernet products) providing common device identification and inventory objects. It exposes basic identity data such as device model, hardware/firmware version, and similar inventory attributes rather than deep performance counters. Its monitoring role is centered on software/hardware inventory visibility — confirming what firmware or hardware revision a switch is running, which supports asset tracking and helps flag devices that need a firmware update or that don't match an expected baseline. It underlies other BCS-family MIB modules that provide fuller status and configuration data, serving as the common identity layer for that vendor's industrial switch product line. It underpins BCS-IDENT-MIB SNMP monitoring wherever it is deployed, on Belden/Hirschmann (formerly Motorola BCS) industrial Ethernet switches used in factory automation, utility, and other ruggedized networking environments.

IPNetwork Monitor allows you to monitor SNMP objects defined in BCS-IDENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

device model identification
hardware/firmware version
inventory/identity attributes

Supported Devices

Hirschmann BOBCAT BRS40 Series — current industrial full-gigabit Ethernet switch with TSN support

Monitoring Examples

No sample objects were captured for this module in this batch, so specific object names cannot be cited verbatim; conceptually, an administrator would poll this MIB's identity objects to confirm a switch's model and firmware version match the expected inventory baseline, useful for detecting devices running outdated or unexpected firmware across an industrial network.

OIDs

OID symbolic	OID numeric	Type	Access	Description
acBsi	1.3.6.1.4.1.1166.9.4
acc4000d	1.3.6.1.4.1.1166.1.1
acCommon	1.3.6.1.4.1.1166.9.1
acOperations	1.3.6.1.4.1.1166.9.5
acpStatus	1.3.6.1.4.1.1166.1.11
acSecurity	1.3.6.1.4.1.1166.9.2
acServices	1.3.6.1.4.1.1166.9.3
acTopology	1.3.6.1.4.1.1166.9.6
addressablecontrol	1.3.6.1.4.1.1166.9
adm	1.3.6.1.4.1.1166.1.64
agb	1.3.6.1.4.1.1166.1.37
anicd	1.3.6.1.4.1.1166.1.2
ap	1.3.6.1.4.1.1166.1.406
apex	1.3.6.1.4.1.1166.1.31
apex1500	1.3.6.1.4.1.1166.1.36
arpd	1.3.6.1.4.1.1166.1.14
b3	1.3.6.1.4.1.1166.1.63
bcs	1.3.6.1.4.1.1166.7
bcsDatabase	1.3.6.1.4.1.1166.7.11
bcsIdent	1.3.6.1.4.1.1166.7.1
bcsLogs	1.3.6.1.4.1.1166.7.4
bcsMsgGeneration	1.3.6.1.4.1.1166.7.21
bcsRedundancy	1.3.6.1.4.1.1166.7.12
bcsSimulcrypt	1.3.6.1.4.1.1166.7.9
bcsSimulcryptMux	1.3.6.1.4.1.1166.7.8
bcsSimulcryptScs	1.3.6.1.4.1.1166.7.7
bnc	1.3.6.1.4.1.1166.1.102
bsiAdapter	1.3.6.1.4.1.1166.1.72
bti	1.3.6.1.4.1.1166.1.200
btiIntMIB	1.3.6.1.4.1.1166.1.202
cableCard	1.3.6.1.4.1.1166.1.350
chsInternal	1.3.6.1.4.1.1166.10
corvusMIB	1.3.6.1.4.1.1166.1.312
cpms	1.3.6.1.4.1.1166.1.405
cs1000	1.3.6.1.4.1.1166.1.401
dac6000	1.3.6.1.4.1.1166.1.403
dct5000	1.3.6.1.4.1.1166.1.300
dct5100	1.3.6.1.4.1.1166.1.301
dct5200	1.3.6.1.4.1.1166.1.302
dem	1.3.6.1.4.1.1166.1.83
drmenginecm	1.3.6.1.4.1.1166.1.103
drmengineecmg	1.3.6.1.4.1.1166.1.78
drmenginekskdc	1.3.6.1.4.1.1166.1.76
drmenginerte	1.3.6.1.4.1.1166.1.77
drmengineskgpkg	1.3.6.1.4.1.1166.1.79
dsr350f	1.3.6.1.4.1.1166.1.321
ecmg	1.3.6.1.4.1.1166.1.71
edfaMIB	1.3.6.1.4.1.1166.1.311
emLogin	1.3.6.1.4.1.1166.10.1
entitlementKey	1.3.6.1.4.1.1166.1.13
erm	1.3.6.1.4.1.1166.1.17
gi	1.3.6.1.4.1.1166			The SMIv2 MIB module for the MOTOROLA BCS common ident objects. The MIB Tree for this is shown below.
gicommon	1.3.6.1.4.1.1166.4
giproducts	1.3.6.1.4.1.1166.1
giproxies	1.3.6.1.4.1.1166.3
gom	1.3.6.1.4.1.1166.1.62
gsrm	1.3.6.1.4.1.1166.1.61
hdd2000	1.3.6.1.4.1.1166.1.40
heartbeat	1.3.6.1.4.1.1166.1.12
hfcEms	1.3.6.1.4.1.1166.1.101
STR identAgentVersion	1.3.6.1.4.1.1166.7.1.12	DisplayString	read-only	The version number of the Agent.
STR identChassisNumber	1.3.6.1.4.1.1166.7.1.2	DisplayString	read-only	This contains the chassis number of the unit. This is applicable only to a limited number of products, currently, only the ITEM-1000. For products for which this is not applicable, this will be a null object. There is no specification of the internal format of the chassis number. The means by which any product determines its chassis number is to be determined by each individual product.
INT identCommand	1.3.6.1.4.1.1166.7.1.13	INTEGER	read-write	This is the command to be executed by the resource managed by the agent. The value unspecified is always returned on SNMP Get/GetNext while the resource is running. If the restart(1) command is given, currentlyRestarting(2) is returned while the resource is preparing to restart (reboot).
STR identHardwareFeatures	1.3.6.1.4.1.1166.7.1.5	DisplayString	read-only	This contains a display string that defines the features of this particular unit. There is no specification of the internal format of the hardware features. The hardware features is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
STR identHardwareVersion	1.3.6.1.4.1.1166.7.1.4	DisplayString	read-only	This contains a display string that defines the hardware version of this particular unit. There is no specification of the internal format of the hardware version. The hardware version is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
INT identIfAdministrativeState	1.3.6.1.4.1.1166.7.1.14.1.12	INTEGER	read-write	The current Adminsitrative state of the interface as defined in ISO/IEC 10164-2.
INT identIfAlarmStatus	1.3.6.1.4.1.1166.7.1.14.1.14	INTEGER	read-write	This object defines the Alarm status of the interface as defined in ISO/IEC 10164-2 and state-machine
INT identIfAvailabilityStatus	1.3.6.1.4.1.1166.7.1.14.1.15	INTEGER	read-only	This object controls the Availability status of the interface as defined in ISO/IEC 10164-2 and state-machine
INT identIfCommand	1.3.6.1.4.1.1166.7.1.14.1.11	INTEGER	read-write	This is the command to be executed by the resource managed by the agent. The value unspecified(10 is always returned on SNMP Get/GetNext while the other values are set by the manager and executed by the resource.
ENT identIfEntryStatus	1.3.6.1.4.1.1166.7.1.14.1.17	EntryStatus	read-write	This object is used to create, delete or modify a row in this table. To create a a new network element, this object is initially set to 'createRequest'. After completion of the configuration of the new entry, the manager must set the appropriate instance of this object to the value valid(1) or aborts, setting this object to invalid(4). This object must not be set to 'active' unless the following columnar objects exist in this row: identIfExtensionIndex identIfSerialNumber identIfHardwareVersion identIfInventoryCode identIfFirmwareVersion1 identIfSpecific To delete an existing entry in this table, the manager must set the appropriate instance of this object to the value invalid(4). Creation of an instance of this object has the effect of creating the supplemental object instances to complete the conceptual row. An existing instance of this entry cannot be created. If circumstances occur which cause an entry to become invalid, the agent modifies the value of the appropriate instance of this object to invalid(4). Whenever, the value of this object for a particular entry becomes invalid(4), the conceptual row for that instance may be removed from the table at any time, either immediately or subsequently.
identIfExtensionEntry	1.3.6.1.4.1.1166.7.1.14.1		not-accessible	An entry (conceptual row) in the Board Table.
INT identIfExtensionIndex	1.3.6.1.4.1.1166.7.1.14.1.1	INTEGER	read-only	Same value as ifIndex of MIB II for the same board.
identIfExtensionTable	1.3.6.1.4.1.1166.7.1.14		not-accessible	This table contains extensions to the MIB II ifTable which contains the definitions of all interfaces. An ifTable entry may be a board or just a port on a board. Any ifTable entry can have an extension in the identIfExtensionTable. The corrsponding entry in that table will have the identIfIndex = ifIndex. Within the ifTable the presence of such an entry is indicated by setting the variable ifSpecific to the OBJECT IDENTIFIER value of identIfExtensionTable. Otherwise iFSpecific is set to {0 0}. The ifType - other - is used for all board types not envisoned by MIB II.
STR identIfFirmwareVersion1	1.3.6.1.4.1.1166.7.1.14.1.6	DisplayString	read-only	Within a product, there may be several identifiers of such firmware, boot proms, kernel versions, flash versions, etc. This field (and the 3 that follow) are used to hold the identification of these items. These values must be entered into the board at the time of manufacturing. Unused fields are reported as null values. These fields are available to the network manager for applications that keep track of the firmware related identification. There is no specification of the internal format of firmware version identifiers.
STR identIfFirmwareVersion2	1.3.6.1.4.1.1166.7.1.14.1.7	DisplayString	read-only	Firmware related identification field # 2.
STR identIfFirmwareVersion3	1.3.6.1.4.1.1166.7.1.14.1.8	DisplayString	read-only	Firmware related identification field # 3.
STR identIfFirmwareVersion4	1.3.6.1.4.1.1166.7.1.14.1.9	DisplayString	read-only	Firmware related identification field # 4
STR identIfHardwareFeatures	1.3.6.1.4.1.1166.7.1.14.1.4	DisplayString	read-only	This contains a display string that defines the features of this particular board. There is no specification of the internal format of the hardware features. The hardware features is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
STR identIfHardwareVersion	1.3.6.1.4.1.1166.7.1.14.1.3	DisplayString	read-only	This contains a display string that defines the version of this particular board. There is no specification of the internal format of the hardware version. The hardware version is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
INT identIfIndex	1.3.6.1.4.1.1166.7.1.3	INTEGER	read-only	This contains the IfIndex of the OAM&P port.
STR identIfInventoryCode	1.3.6.1.4.1.1166.7.1.14.1.5	DisplayString	read-write	This contains a display string that defines the inventory code for this board. This is an optional value; if there is no inventory code, The unit will respond with a null string. Once an inventory code has been set, it should be kept in non-volatile memory. The unit should only allow this object to be set when it is in the 'configuration' mode. There is no specification of the internal format of the inventory Code.
INT identIfOperationalState	1.3.6.1.4.1.1166.7.1.14.1.13	INTEGER	read-only	The current Operational state of the interface as defined in ISO/IEC 10164-2
STR identIfSerialNumber	1.3.6.1.4.1.1166.7.1.14.1.2	DisplayString	read-only	This contains the serial number of the board. There is no specification of the internal format of the serial number. The serial number is entered into either permanent or non-volatile memory of the unit at the time of manufacture. Note - the unit itself supplies the serial number.
INT identIfSlotId	1.3.6.1.4.1.1166.7.1.14.1.10	INTEGER	read-write	This variable identifies the board slot.
OID identIfSpecific	1.3.6.1.4.1.1166.7.1.14.1.16	OBJECT IDENTIFIER	read-only	The object identifier of a board type specific extension to the ifTable if necessary. Otherwise, identIfSpecific is set to {0 0}.
STR identInventoryCode	1.3.6.1.4.1.1166.7.1.6	DisplayString	read-write	This contains a display string that defines the inventory code for this unit. Once an inventory code has been set, it should be kept in non-volatile memory. The unit should only allow this object to be set when it is in the 'configuration' mode. There is no specification of the internal format of the inventory Code.
identity	1.3.6.1.4.1.1166.4.1
STR identLocationArea	1.3.6.1.4.1.1166.7.1.8	DisplayString	read-write	This is different from the MIB II sysLocation variable as it contains only the location area and does not describe the precise location. This contains a display string that defines the area in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.
STR identLocationRack	1.3.6.1.4.1.1166.7.1.9	DisplayString	read-write	This contains a display string that defines the rack in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.
STR identLocationShelf	1.3.6.1.4.1.1166.7.1.10	DisplayString	read-write	This contains a display string that defines the shelf in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.
STR identMIBVersion	1.3.6.1.4.1.1166.7.1.11	DisplayString	read-only	The version number of this MIB.
STR identSerialNumber	1.3.6.1.4.1.1166.7.1.1	DisplayString	read-only	This contains the serial number of the unit. There is no specification of the internal format of the serial number. The serial number is entered into either permanent or non- volatile memory of the unit at the time of manufacture. Note - the unit itself supplies the serial number.
STR identSoftwareVersion	1.3.6.1.4.1.1166.7.1.7	DisplayString	read-only	This contains a display string that defines the current version of the software for this unit. The format of the software version is a fully qualified directory name. This value is received by a unit as within a BOOTP response from the BOOTP server. It is available to the network manager for applications that track the installed software. Once the software version has been set, it should be kept in non-volatile memory.
STR identUnitModel	1.3.6.1.4.1.1166.7.1.15	DisplayString	read-only	This contains the model of the product. For example, the ITEM-1000 would contain 'ITEM1000'.
im1000	1.3.6.1.4.1.1166.1.8
ird4500x	1.3.6.1.4.1.1166.1.610
ird4520x	1.3.6.1.4.1.1166.1.620
irt1000	1.3.6.1.4.1.1166.1.5
item1000	1.3.6.1.4.1.1166.1.4
kls	1.3.6.1.4.1.1166.1.402
lmm	1.3.6.1.4.1.1166.1.86
logs	1.3.6.1.4.1.1166.4.4
mea	1.3.6.1.4.1.1166.8
merlin	1.3.6.1.4.1.1166.1.50
motoIPNSprodID	1.3.6.1.4.1.1166.1.450
motproxies	1.3.6.1.4.1.1166.6
mpe	1.3.6.1.4.1.1166.1.33
mps	1.3.6.1.4.1.1166.1.9
mwtea200	1.3.6.1.4.1.1166.1.151
nc1500	1.3.6.1.4.1.1166.1.6
ncs	1.3.6.1.4.1.1166.1.84
ne	1.3.6.1.4.1.1166.1.74
ne2000	1.3.6.1.4.1.1166.1.35
ne2500	1.3.6.1.4.1.1166.1.38
netSentry	1.3.6.1.4.1.1166.1.99
oa600	1.3.6.1.4.1.1166.1.313
oles	1.3.6.1.4.1.1166.1.73
om1000	1.3.6.1.4.1.1166.1.7
ponEm870	1.3.6.1.4.1.1166.1.210
ponOa	1.3.6.1.4.1.1166.1.150
prs	1.3.6.1.4.1.1166.1.81
ps	1.3.6.1.4.1.1166.1.407
radd6000	1.3.6.1.4.1.1166.1.400
radiusClient	1.3.6.1.4.1.1166.10.2
rc	1.3.6.1.4.1.1166.1.88
rem	1.3.6.1.4.1.1166.1.32
rfModMIB	1.3.6.1.4.1.1166.1.201
rpa	1.3.6.1.4.1.1166.1.250
rpc	1.3.6.1.4.1.1166.1.251
rpd1000	1.3.6.1.4.1.1166.1.10
rsr	1.3.6.1.4.1.1166.1.60
saDANIS	1.3.6.1.4.1.1166.1.30
sb2000	1.3.6.1.4.1.1166.1.21
sb2100	1.3.6.1.4.1.1166.1.19
sb2100D	1.3.6.1.4.1.1166.1.20
sdi	1.3.6.1.4.1.1166.1.404
sdm	1.3.6.1.4.1.1166.1.100
se2000	1.3.6.1.4.1.1166.1.82
se4000	1.3.6.1.4.1.1166.1.87
sem	1.3.6.1.4.1.1166.1.70
sg4000	1.3.6.1.4.1.1166.1.203
spe	1.3.6.1.4.1.1166.1.34
state	1.3.6.1.4.1.1166.4.2
stdc	1.3.6.1.4.1.1166.1.104
surfBbnh	1.3.6.1.4.1.1166.1.18
svm	1.3.6.1.4.1.1166.1.16
svom	1.3.6.1.4.1.1166.1.15
tmx	1.3.6.1.4.1.1166.1.80
tmxCommTrap	1.3.6.1.4.1.1166.1.75
traps	1.3.6.1.4.1.1166.4.3
tview	1.3.6.1.4.1.1166.1.105
ucs	1.3.6.1.4.1.1166.1.85

OID symbolic	OID numeric	Type	Access	Description
gi	1.3.6.1.4.1.1166			The SMIv2 MIB module for the MOTOROLA BCS common ident objects. The MIB Tree for this is shown below.
giproducts	1.3.6.1.4.1.1166.1
acc4000d	1.3.6.1.4.1.1166.1.1
anicd	1.3.6.1.4.1.1166.1.2
item1000	1.3.6.1.4.1.1166.1.4
irt1000	1.3.6.1.4.1.1166.1.5
nc1500	1.3.6.1.4.1.1166.1.6
om1000	1.3.6.1.4.1.1166.1.7
im1000	1.3.6.1.4.1.1166.1.8
mps	1.3.6.1.4.1.1166.1.9
rpd1000	1.3.6.1.4.1.1166.1.10
acpStatus	1.3.6.1.4.1.1166.1.11
heartbeat	1.3.6.1.4.1.1166.1.12
entitlementKey	1.3.6.1.4.1.1166.1.13
arpd	1.3.6.1.4.1.1166.1.14
svom	1.3.6.1.4.1.1166.1.15
svm	1.3.6.1.4.1.1166.1.16
erm	1.3.6.1.4.1.1166.1.17
surfBbnh	1.3.6.1.4.1.1166.1.18
sb2100	1.3.6.1.4.1.1166.1.19
sb2100D	1.3.6.1.4.1.1166.1.20
sb2000	1.3.6.1.4.1.1166.1.21
saDANIS	1.3.6.1.4.1.1166.1.30
apex	1.3.6.1.4.1.1166.1.31
rem	1.3.6.1.4.1.1166.1.32
mpe	1.3.6.1.4.1.1166.1.33
spe	1.3.6.1.4.1.1166.1.34
ne2000	1.3.6.1.4.1.1166.1.35
apex1500	1.3.6.1.4.1.1166.1.36
agb	1.3.6.1.4.1.1166.1.37
ne2500	1.3.6.1.4.1.1166.1.38
hdd2000	1.3.6.1.4.1.1166.1.40
merlin	1.3.6.1.4.1.1166.1.50
rsr	1.3.6.1.4.1.1166.1.60
gsrm	1.3.6.1.4.1.1166.1.61
gom	1.3.6.1.4.1.1166.1.62
b3	1.3.6.1.4.1.1166.1.63
adm	1.3.6.1.4.1.1166.1.64
sem	1.3.6.1.4.1.1166.1.70
ecmg	1.3.6.1.4.1.1166.1.71
bsiAdapter	1.3.6.1.4.1.1166.1.72
oles	1.3.6.1.4.1.1166.1.73
ne	1.3.6.1.4.1.1166.1.74
tmxCommTrap	1.3.6.1.4.1.1166.1.75
drmenginekskdc	1.3.6.1.4.1.1166.1.76
drmenginerte	1.3.6.1.4.1.1166.1.77
drmengineecmg	1.3.6.1.4.1.1166.1.78
drmengineskgpkg	1.3.6.1.4.1.1166.1.79
tmx	1.3.6.1.4.1.1166.1.80
prs	1.3.6.1.4.1.1166.1.81
se2000	1.3.6.1.4.1.1166.1.82
dem	1.3.6.1.4.1.1166.1.83
ncs	1.3.6.1.4.1.1166.1.84
ucs	1.3.6.1.4.1.1166.1.85
lmm	1.3.6.1.4.1.1166.1.86
se4000	1.3.6.1.4.1.1166.1.87
rc	1.3.6.1.4.1.1166.1.88
netSentry	1.3.6.1.4.1.1166.1.99
sdm	1.3.6.1.4.1.1166.1.100
hfcEms	1.3.6.1.4.1.1166.1.101
bnc	1.3.6.1.4.1.1166.1.102
drmenginecm	1.3.6.1.4.1.1166.1.103
stdc	1.3.6.1.4.1.1166.1.104
tview	1.3.6.1.4.1.1166.1.105
ponOa	1.3.6.1.4.1.1166.1.150
mwtea200	1.3.6.1.4.1.1166.1.151
bti	1.3.6.1.4.1.1166.1.200
rfModMIB	1.3.6.1.4.1.1166.1.201
btiIntMIB	1.3.6.1.4.1.1166.1.202
sg4000	1.3.6.1.4.1.1166.1.203
ponEm870	1.3.6.1.4.1.1166.1.210
rpa	1.3.6.1.4.1.1166.1.250
rpc	1.3.6.1.4.1.1166.1.251
dct5000	1.3.6.1.4.1.1166.1.300
dct5100	1.3.6.1.4.1.1166.1.301
dct5200	1.3.6.1.4.1.1166.1.302
edfaMIB	1.3.6.1.4.1.1166.1.311
corvusMIB	1.3.6.1.4.1.1166.1.312
oa600	1.3.6.1.4.1.1166.1.313
dsr350f	1.3.6.1.4.1.1166.1.321
cableCard	1.3.6.1.4.1.1166.1.350
radd6000	1.3.6.1.4.1.1166.1.400
cs1000	1.3.6.1.4.1.1166.1.401
kls	1.3.6.1.4.1.1166.1.402
dac6000	1.3.6.1.4.1.1166.1.403
sdi	1.3.6.1.4.1.1166.1.404
cpms	1.3.6.1.4.1.1166.1.405
ap	1.3.6.1.4.1.1166.1.406
ps	1.3.6.1.4.1.1166.1.407
motoIPNSprodID	1.3.6.1.4.1.1166.1.450
ird4500x	1.3.6.1.4.1.1166.1.610
ird4520x	1.3.6.1.4.1.1166.1.620
giproxies	1.3.6.1.4.1.1166.3
gicommon	1.3.6.1.4.1.1166.4
identity	1.3.6.1.4.1.1166.4.1
state	1.3.6.1.4.1.1166.4.2
traps	1.3.6.1.4.1.1166.4.3
logs	1.3.6.1.4.1.1166.4.4
motproxies	1.3.6.1.4.1.1166.6
bcs	1.3.6.1.4.1.1166.7
bcsIdent	1.3.6.1.4.1.1166.7.1
STR identSerialNumber	1.3.6.1.4.1.1166.7.1.1	DisplayString	read-only	This contains the serial number of the unit. There is no specification of the internal format of the serial number. The serial number is entered into either permanent or non- volatile memory of the unit at the time of manufacture. Note - the unit itself supplies the serial number.
STR identChassisNumber	1.3.6.1.4.1.1166.7.1.2	DisplayString	read-only	This contains the chassis number of the unit. This is applicable only to a limited number of products, currently, only the ITEM-1000. For products for which this is not applicable, this will be a null object. There is no specification of the internal format of the chassis number. The means by which any product determines its chassis number is to be determined by each individual product.
INT identIfIndex	1.3.6.1.4.1.1166.7.1.3	INTEGER	read-only	This contains the IfIndex of the OAM&P port.
STR identHardwareVersion	1.3.6.1.4.1.1166.7.1.4	DisplayString	read-only	This contains a display string that defines the hardware version of this particular unit. There is no specification of the internal format of the hardware version. The hardware version is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
STR identHardwareFeatures	1.3.6.1.4.1.1166.7.1.5	DisplayString	read-only	This contains a display string that defines the features of this particular unit. There is no specification of the internal format of the hardware features. The hardware features is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
STR identInventoryCode	1.3.6.1.4.1.1166.7.1.6	DisplayString	read-write	This contains a display string that defines the inventory code for this unit. Once an inventory code has been set, it should be kept in non-volatile memory. The unit should only allow this object to be set when it is in the 'configuration' mode. There is no specification of the internal format of the inventory Code.
STR identSoftwareVersion	1.3.6.1.4.1.1166.7.1.7	DisplayString	read-only	This contains a display string that defines the current version of the software for this unit. The format of the software version is a fully qualified directory name. This value is received by a unit as within a BOOTP response from the BOOTP server. It is available to the network manager for applications that track the installed software. Once the software version has been set, it should be kept in non-volatile memory.
STR identLocationArea	1.3.6.1.4.1.1166.7.1.8	DisplayString	read-write	This is different from the MIB II sysLocation variable as it contains only the location area and does not describe the precise location. This contains a display string that defines the area in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.
STR identLocationRack	1.3.6.1.4.1.1166.7.1.9	DisplayString	read-write	This contains a display string that defines the rack in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.
STR identLocationShelf	1.3.6.1.4.1.1166.7.1.10	DisplayString	read-write	This contains a display string that defines the shelf in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.
STR identMIBVersion	1.3.6.1.4.1.1166.7.1.11	DisplayString	read-only	The version number of this MIB.
STR identAgentVersion	1.3.6.1.4.1.1166.7.1.12	DisplayString	read-only	The version number of the Agent.
INT identCommand	1.3.6.1.4.1.1166.7.1.13	INTEGER	read-write	This is the command to be executed by the resource managed by the agent. The value unspecified is always returned on SNMP Get/GetNext while the resource is running. If the restart(1) command is given, currentlyRestarting(2) is returned while the resource is preparing to restart (reboot).
identIfExtensionTable	1.3.6.1.4.1.1166.7.1.14		not-accessible	This table contains extensions to the MIB II ifTable which contains the definitions of all interfaces. An ifTable entry may be a board or just a port on a board. Any ifTable entry can have an extension in the identIfExtensionTable. The corrsponding entry in that table will have the identIfIndex = ifIndex. Within the ifTable the presence of such an entry is indicated by setting the variable ifSpecific to the OBJECT IDENTIFIER value of identIfExtensionTable. Otherwise iFSpecific is set to {0 0}. The ifType - other - is used for all board types not envisoned by MIB II.
identIfExtensionEntry	1.3.6.1.4.1.1166.7.1.14.1		not-accessible	An entry (conceptual row) in the Board Table.
INT identIfExtensionIndex	1.3.6.1.4.1.1166.7.1.14.1.1	INTEGER	read-only	Same value as ifIndex of MIB II for the same board.
STR identIfSerialNumber	1.3.6.1.4.1.1166.7.1.14.1.2	DisplayString	read-only	This contains the serial number of the board. There is no specification of the internal format of the serial number. The serial number is entered into either permanent or non-volatile memory of the unit at the time of manufacture. Note - the unit itself supplies the serial number.
STR identIfHardwareVersion	1.3.6.1.4.1.1166.7.1.14.1.3	DisplayString	read-only	This contains a display string that defines the version of this particular board. There is no specification of the internal format of the hardware version. The hardware version is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
STR identIfHardwareFeatures	1.3.6.1.4.1.1166.7.1.14.1.4	DisplayString	read-only	This contains a display string that defines the features of this particular board. There is no specification of the internal format of the hardware features. The hardware features is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
STR identIfInventoryCode	1.3.6.1.4.1.1166.7.1.14.1.5	DisplayString	read-write	This contains a display string that defines the inventory code for this board. This is an optional value; if there is no inventory code, The unit will respond with a null string. Once an inventory code has been set, it should be kept in non-volatile memory. The unit should only allow this object to be set when it is in the 'configuration' mode. There is no specification of the internal format of the inventory Code.
STR identIfFirmwareVersion1	1.3.6.1.4.1.1166.7.1.14.1.6	DisplayString	read-only	Within a product, there may be several identifiers of such firmware, boot proms, kernel versions, flash versions, etc. This field (and the 3 that follow) are used to hold the identification of these items. These values must be entered into the board at the time of manufacturing. Unused fields are reported as null values. These fields are available to the network manager for applications that keep track of the firmware related identification. There is no specification of the internal format of firmware version identifiers.
STR identIfFirmwareVersion2	1.3.6.1.4.1.1166.7.1.14.1.7	DisplayString	read-only	Firmware related identification field # 2.
STR identIfFirmwareVersion3	1.3.6.1.4.1.1166.7.1.14.1.8	DisplayString	read-only	Firmware related identification field # 3.
STR identIfFirmwareVersion4	1.3.6.1.4.1.1166.7.1.14.1.9	DisplayString	read-only	Firmware related identification field # 4
INT identIfSlotId	1.3.6.1.4.1.1166.7.1.14.1.10	INTEGER	read-write	This variable identifies the board slot.
INT identIfCommand	1.3.6.1.4.1.1166.7.1.14.1.11	INTEGER	read-write	This is the command to be executed by the resource managed by the agent. The value unspecified(10 is always returned on SNMP Get/GetNext while the other values are set by the manager and executed by the resource.
INT identIfAdministrativeState	1.3.6.1.4.1.1166.7.1.14.1.12	INTEGER	read-write	The current Adminsitrative state of the interface as defined in ISO/IEC 10164-2.
INT identIfOperationalState	1.3.6.1.4.1.1166.7.1.14.1.13	INTEGER	read-only	The current Operational state of the interface as defined in ISO/IEC 10164-2
INT identIfAlarmStatus	1.3.6.1.4.1.1166.7.1.14.1.14	INTEGER	read-write	This object defines the Alarm status of the interface as defined in ISO/IEC 10164-2 and state-machine
INT identIfAvailabilityStatus	1.3.6.1.4.1.1166.7.1.14.1.15	INTEGER	read-only	This object controls the Availability status of the interface as defined in ISO/IEC 10164-2 and state-machine
OID identIfSpecific	1.3.6.1.4.1.1166.7.1.14.1.16	OBJECT IDENTIFIER	read-only	The object identifier of a board type specific extension to the ifTable if necessary. Otherwise, identIfSpecific is set to {0 0}.
ENT identIfEntryStatus	1.3.6.1.4.1.1166.7.1.14.1.17	EntryStatus	read-write	This object is used to create, delete or modify a row in this table. To create a a new network element, this object is initially set to 'createRequest'. After completion of the configuration of the new entry, the manager must set the appropriate instance of this object to the value valid(1) or aborts, setting this object to invalid(4). This object must not be set to 'active' unless the following columnar objects exist in this row: identIfExtensionIndex identIfSerialNumber identIfHardwareVersion identIfInventoryCode identIfFirmwareVersion1 identIfSpecific To delete an existing entry in this table, the manager must set the appropriate instance of this object to the value invalid(4). Creation of an instance of this object has the effect of creating the supplemental object instances to complete the conceptual row. An existing instance of this entry cannot be created. If circumstances occur which cause an entry to become invalid, the agent modifies the value of the appropriate instance of this object to invalid(4). Whenever, the value of this object for a particular entry becomes invalid(4), the conceptual row for that instance may be removed from the table at any time, either immediately or subsequently.
STR identUnitModel	1.3.6.1.4.1.1166.7.1.15	DisplayString	read-only	This contains the model of the product. For example, the ITEM-1000 would contain 'ITEM1000'.
bcsLogs	1.3.6.1.4.1.1166.7.4
bcsSimulcryptScs	1.3.6.1.4.1.1166.7.7
bcsSimulcryptMux	1.3.6.1.4.1.1166.7.8
bcsSimulcrypt	1.3.6.1.4.1.1166.7.9
bcsDatabase	1.3.6.1.4.1.1166.7.11
bcsRedundancy	1.3.6.1.4.1.1166.7.12
bcsMsgGeneration	1.3.6.1.4.1.1166.7.21
mea	1.3.6.1.4.1.1166.8
addressablecontrol	1.3.6.1.4.1.1166.9
acCommon	1.3.6.1.4.1.1166.9.1
acSecurity	1.3.6.1.4.1.1166.9.2
acServices	1.3.6.1.4.1.1166.9.3
acBsi	1.3.6.1.4.1.1166.9.4
acOperations	1.3.6.1.4.1.1166.9.5
acTopology	1.3.6.1.4.1.1166.9.6
chsInternal	1.3.6.1.4.1.1166.10
emLogin	1.3.6.1.4.1.1166.10.1
radiusClient	1.3.6.1.4.1.1166.10.2

DisplayString (20)
STR identAgentVersion	1.3.6.1.4.1.1166.7.1.12	DisplayString	read-only	The version number of the Agent.
STR identChassisNumber	1.3.6.1.4.1.1166.7.1.2	DisplayString	read-only	This contains the chassis number of the unit. This is applicable only to a limited number of products, currently, only the ITEM-1000. For products for which this is not applicable, this will be a null object. There is no specification of the internal format of the chassis number. The means by which any product determines its chassis number is to be determined by each individual product.
STR identHardwareFeatures	1.3.6.1.4.1.1166.7.1.5	DisplayString	read-only	This contains a display string that defines the features of this particular unit. There is no specification of the internal format of the hardware features. The hardware features is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
STR identHardwareVersion	1.3.6.1.4.1.1166.7.1.4	DisplayString	read-only	This contains a display string that defines the hardware version of this particular unit. There is no specification of the internal format of the hardware version. The hardware version is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
STR identIfFirmwareVersion1	1.3.6.1.4.1.1166.7.1.14.1.6	DisplayString	read-only	Within a product, there may be several identifiers of such firmware, boot proms, kernel versions, flash versions, etc. This field (and the 3 that follow) are used to hold the identification of these items. These values must be entered into the board at the time of manufacturing. Unused fields are reported as null values. These fields are available to the network manager for applications that keep track of the firmware related identification. There is no specification of the internal format of firmware version identifiers.
STR identIfFirmwareVersion2	1.3.6.1.4.1.1166.7.1.14.1.7	DisplayString	read-only	Firmware related identification field # 2.
STR identIfFirmwareVersion3	1.3.6.1.4.1.1166.7.1.14.1.8	DisplayString	read-only	Firmware related identification field # 3.
STR identIfFirmwareVersion4	1.3.6.1.4.1.1166.7.1.14.1.9	DisplayString	read-only	Firmware related identification field # 4
STR identIfHardwareFeatures	1.3.6.1.4.1.1166.7.1.14.1.4	DisplayString	read-only	This contains a display string that defines the features of this particular board. There is no specification of the internal format of the hardware features. The hardware features is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
STR identIfHardwareVersion	1.3.6.1.4.1.1166.7.1.14.1.3	DisplayString	read-only	This contains a display string that defines the version of this particular board. There is no specification of the internal format of the hardware version. The hardware version is entered into the either permanent or non-volatile memory of the unit at the time of manufacture.
STR identIfInventoryCode	1.3.6.1.4.1.1166.7.1.14.1.5	DisplayString	read-write	This contains a display string that defines the inventory code for this board. This is an optional value; if there is no inventory code, The unit will respond with a null string. Once an inventory code has been set, it should be kept in non-volatile memory. The unit should only allow this object to be set when it is in the 'configuration' mode. There is no specification of the internal format of the inventory Code.
STR identIfSerialNumber	1.3.6.1.4.1.1166.7.1.14.1.2	DisplayString	read-only	This contains the serial number of the board. There is no specification of the internal format of the serial number. The serial number is entered into either permanent or non-volatile memory of the unit at the time of manufacture. Note - the unit itself supplies the serial number.
STR identInventoryCode	1.3.6.1.4.1.1166.7.1.6	DisplayString	read-write	This contains a display string that defines the inventory code for this unit. Once an inventory code has been set, it should be kept in non-volatile memory. The unit should only allow this object to be set when it is in the 'configuration' mode. There is no specification of the internal format of the inventory Code.
STR identLocationArea	1.3.6.1.4.1.1166.7.1.8	DisplayString	read-write	This is different from the MIB II sysLocation variable as it contains only the location area and does not describe the precise location. This contains a display string that defines the area in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.
STR identLocationRack	1.3.6.1.4.1.1166.7.1.9	DisplayString	read-write	This contains a display string that defines the rack in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.
STR identLocationShelf	1.3.6.1.4.1.1166.7.1.10	DisplayString	read-write	This contains a display string that defines the shelf in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory.
STR identMIBVersion	1.3.6.1.4.1.1166.7.1.11	DisplayString	read-only	The version number of this MIB.
STR identSerialNumber	1.3.6.1.4.1.1166.7.1.1	DisplayString	read-only	This contains the serial number of the unit. There is no specification of the internal format of the serial number. The serial number is entered into either permanent or non- volatile memory of the unit at the time of manufacture. Note - the unit itself supplies the serial number.
STR identSoftwareVersion	1.3.6.1.4.1.1166.7.1.7	DisplayString	read-only	This contains a display string that defines the current version of the software for this unit. The format of the software version is a fully qualified directory name. This value is received by a unit as within a BOOTP response from the BOOTP server. It is available to the network manager for applications that track the installed software. Once the software version has been set, it should be kept in non-volatile memory.
STR identUnitModel	1.3.6.1.4.1.1166.7.1.15	DisplayString	read-only	This contains the model of the product. For example, the ITEM-1000 would contain 'ITEM1000'.
EntryStatus (1)
ENT identIfEntryStatus	1.3.6.1.4.1.1166.7.1.14.1.17	EntryStatus	read-write	This object is used to create, delete or modify a row in this table. To create a a new network element, this object is initially set to 'createRequest'. After completion of the configuration of the new entry, the manager must set the appropriate instance of this object to the value valid(1) or aborts, setting this object to invalid(4). This object must not be set to 'active' unless the following columnar objects exist in this row: identIfExtensionIndex identIfSerialNumber identIfHardwareVersion identIfInventoryCode identIfFirmwareVersion1 identIfSpecific To delete an existing entry in this table, the manager must set the appropriate instance of this object to the value invalid(4). Creation of an instance of this object has the effect of creating the supplemental object instances to complete the conceptual row. An existing instance of this entry cannot be created. If circumstances occur which cause an entry to become invalid, the agent modifies the value of the appropriate instance of this object to invalid(4). Whenever, the value of this object for a particular entry becomes invalid(4), the conceptual row for that instance may be removed from the table at any time, either immediately or subsequently.
INTEGER (9)
INT identCommand	1.3.6.1.4.1.1166.7.1.13	INTEGER	read-write	This is the command to be executed by the resource managed by the agent. The value unspecified is always returned on SNMP Get/GetNext while the resource is running. If the restart(1) command is given, currentlyRestarting(2) is returned while the resource is preparing to restart (reboot).
INT identIfAdministrativeState	1.3.6.1.4.1.1166.7.1.14.1.12	INTEGER	read-write	The current Adminsitrative state of the interface as defined in ISO/IEC 10164-2.
INT identIfAlarmStatus	1.3.6.1.4.1.1166.7.1.14.1.14	INTEGER	read-write	This object defines the Alarm status of the interface as defined in ISO/IEC 10164-2 and state-machine
INT identIfAvailabilityStatus	1.3.6.1.4.1.1166.7.1.14.1.15	INTEGER	read-only	This object controls the Availability status of the interface as defined in ISO/IEC 10164-2 and state-machine
INT identIfCommand	1.3.6.1.4.1.1166.7.1.14.1.11	INTEGER	read-write	This is the command to be executed by the resource managed by the agent. The value unspecified(10 is always returned on SNMP Get/GetNext while the other values are set by the manager and executed by the resource.
INT identIfExtensionIndex	1.3.6.1.4.1.1166.7.1.14.1.1	INTEGER	read-only	Same value as ifIndex of MIB II for the same board.
INT identIfIndex	1.3.6.1.4.1.1166.7.1.3	INTEGER	read-only	This contains the IfIndex of the OAM&P port.
INT identIfOperationalState	1.3.6.1.4.1.1166.7.1.14.1.13	INTEGER	read-only	The current Operational state of the interface as defined in ISO/IEC 10164-2
INT identIfSlotId	1.3.6.1.4.1.1166.7.1.14.1.10	INTEGER	read-write	This variable identifies the board slot.
OBJECT IDENTIFIER (1)
OID identIfSpecific	1.3.6.1.4.1.1166.7.1.14.1.16	OBJECT IDENTIFIER	read-only	The object identifier of a board type specific extension to the ifTable if necessary. Otherwise, identIfSpecific is set to {0 0}.
No type (121)
acBsi	1.3.6.1.4.1.1166.9.4
acc4000d	1.3.6.1.4.1.1166.1.1
acCommon	1.3.6.1.4.1.1166.9.1
acOperations	1.3.6.1.4.1.1166.9.5
acpStatus	1.3.6.1.4.1.1166.1.11
acSecurity	1.3.6.1.4.1.1166.9.2
acServices	1.3.6.1.4.1.1166.9.3
acTopology	1.3.6.1.4.1.1166.9.6
addressablecontrol	1.3.6.1.4.1.1166.9
adm	1.3.6.1.4.1.1166.1.64
agb	1.3.6.1.4.1.1166.1.37
anicd	1.3.6.1.4.1.1166.1.2
ap	1.3.6.1.4.1.1166.1.406
apex	1.3.6.1.4.1.1166.1.31
apex1500	1.3.6.1.4.1.1166.1.36
arpd	1.3.6.1.4.1.1166.1.14
b3	1.3.6.1.4.1.1166.1.63
bcs	1.3.6.1.4.1.1166.7
bcsDatabase	1.3.6.1.4.1.1166.7.11
bcsIdent	1.3.6.1.4.1.1166.7.1
bcsLogs	1.3.6.1.4.1.1166.7.4
bcsMsgGeneration	1.3.6.1.4.1.1166.7.21
bcsRedundancy	1.3.6.1.4.1.1166.7.12
bcsSimulcrypt	1.3.6.1.4.1.1166.7.9
bcsSimulcryptMux	1.3.6.1.4.1.1166.7.8
bcsSimulcryptScs	1.3.6.1.4.1.1166.7.7
bnc	1.3.6.1.4.1.1166.1.102
bsiAdapter	1.3.6.1.4.1.1166.1.72
bti	1.3.6.1.4.1.1166.1.200
btiIntMIB	1.3.6.1.4.1.1166.1.202
cableCard	1.3.6.1.4.1.1166.1.350
chsInternal	1.3.6.1.4.1.1166.10
corvusMIB	1.3.6.1.4.1.1166.1.312
cpms	1.3.6.1.4.1.1166.1.405
cs1000	1.3.6.1.4.1.1166.1.401
dac6000	1.3.6.1.4.1.1166.1.403
dct5000	1.3.6.1.4.1.1166.1.300
dct5100	1.3.6.1.4.1.1166.1.301
dct5200	1.3.6.1.4.1.1166.1.302
dem	1.3.6.1.4.1.1166.1.83
drmenginecm	1.3.6.1.4.1.1166.1.103
drmengineecmg	1.3.6.1.4.1.1166.1.78
drmenginekskdc	1.3.6.1.4.1.1166.1.76
drmenginerte	1.3.6.1.4.1.1166.1.77
drmengineskgpkg	1.3.6.1.4.1.1166.1.79
dsr350f	1.3.6.1.4.1.1166.1.321
ecmg	1.3.6.1.4.1.1166.1.71
edfaMIB	1.3.6.1.4.1.1166.1.311
emLogin	1.3.6.1.4.1.1166.10.1
entitlementKey	1.3.6.1.4.1.1166.1.13
erm	1.3.6.1.4.1.1166.1.17
gi	1.3.6.1.4.1.1166			The SMIv2 MIB module for the MOTOROLA BCS common ident objects. The MIB Tree for this is shown below.
gicommon	1.3.6.1.4.1.1166.4
giproducts	1.3.6.1.4.1.1166.1
giproxies	1.3.6.1.4.1.1166.3
gom	1.3.6.1.4.1.1166.1.62
gsrm	1.3.6.1.4.1.1166.1.61
hdd2000	1.3.6.1.4.1.1166.1.40
heartbeat	1.3.6.1.4.1.1166.1.12
hfcEms	1.3.6.1.4.1.1166.1.101
identIfExtensionEntry	1.3.6.1.4.1.1166.7.1.14.1		not-accessible	An entry (conceptual row) in the Board Table.
identIfExtensionTable	1.3.6.1.4.1.1166.7.1.14		not-accessible	This table contains extensions to the MIB II ifTable which contains the definitions of all interfaces. An ifTable entry may be a board or just a port on a board. Any ifTable entry can have an extension in the identIfExtensionTable. The corrsponding entry in that table will have the identIfIndex = ifIndex. Within the ifTable the presence of such an entry is indicated by setting the variable ifSpecific to the OBJECT IDENTIFIER value of identIfExtensionTable. Otherwise iFSpecific is set to {0 0}. The ifType - other - is used for all board types not envisoned by MIB II.
identity	1.3.6.1.4.1.1166.4.1
im1000	1.3.6.1.4.1.1166.1.8
ird4500x	1.3.6.1.4.1.1166.1.610
ird4520x	1.3.6.1.4.1.1166.1.620
irt1000	1.3.6.1.4.1.1166.1.5
item1000	1.3.6.1.4.1.1166.1.4
kls	1.3.6.1.4.1.1166.1.402
lmm	1.3.6.1.4.1.1166.1.86
logs	1.3.6.1.4.1.1166.4.4
mea	1.3.6.1.4.1.1166.8
merlin	1.3.6.1.4.1.1166.1.50
motoIPNSprodID	1.3.6.1.4.1.1166.1.450
motproxies	1.3.6.1.4.1.1166.6
mpe	1.3.6.1.4.1.1166.1.33
mps	1.3.6.1.4.1.1166.1.9
mwtea200	1.3.6.1.4.1.1166.1.151
nc1500	1.3.6.1.4.1.1166.1.6
ncs	1.3.6.1.4.1.1166.1.84
ne	1.3.6.1.4.1.1166.1.74
ne2000	1.3.6.1.4.1.1166.1.35
ne2500	1.3.6.1.4.1.1166.1.38
netSentry	1.3.6.1.4.1.1166.1.99
oa600	1.3.6.1.4.1.1166.1.313
oles	1.3.6.1.4.1.1166.1.73
om1000	1.3.6.1.4.1.1166.1.7
ponEm870	1.3.6.1.4.1.1166.1.210
ponOa	1.3.6.1.4.1.1166.1.150
prs	1.3.6.1.4.1.1166.1.81
ps	1.3.6.1.4.1.1166.1.407
radd6000	1.3.6.1.4.1.1166.1.400
radiusClient	1.3.6.1.4.1.1166.10.2
rc	1.3.6.1.4.1.1166.1.88
rem	1.3.6.1.4.1.1166.1.32
rfModMIB	1.3.6.1.4.1.1166.1.201
rpa	1.3.6.1.4.1.1166.1.250
rpc	1.3.6.1.4.1.1166.1.251
rpd1000	1.3.6.1.4.1.1166.1.10
rsr	1.3.6.1.4.1.1166.1.60
saDANIS	1.3.6.1.4.1.1166.1.30
sb2000	1.3.6.1.4.1.1166.1.21
sb2100	1.3.6.1.4.1.1166.1.19
sb2100D	1.3.6.1.4.1.1166.1.20
sdi	1.3.6.1.4.1.1166.1.404
sdm	1.3.6.1.4.1.1166.1.100
se2000	1.3.6.1.4.1.1166.1.82
se4000	1.3.6.1.4.1.1166.1.87
sem	1.3.6.1.4.1.1166.1.70
sg4000	1.3.6.1.4.1.1166.1.203
spe	1.3.6.1.4.1.1166.1.34
state	1.3.6.1.4.1.1166.4.2
stdc	1.3.6.1.4.1.1166.1.104
surfBbnh	1.3.6.1.4.1.1166.1.18
svm	1.3.6.1.4.1.1166.1.16
svom	1.3.6.1.4.1.1166.1.15
tmx	1.3.6.1.4.1.1166.1.80
tmxCommTrap	1.3.6.1.4.1.1166.1.75
traps	1.3.6.1.4.1.1166.4.3
tview	1.3.6.1.4.1.1166.1.105
ucs	1.3.6.1.4.1.1166.1.85

RFC description

Motorola Broadband Communications Systems (BCS) vendor-private MIB (enterprise OID 1166) defining product and device identification OID registrations for broadband access equipment.

Start monitoring Hirschmann BOBCAT BRS40 Series industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BCS-IDENT-MIB

This MIB depends on

Related MIBs

What Is BCS-IDENT-MIB?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description