All MIBs › HP-ICF-RPVST-MIB
Organization: HP Networking
Last Updated: 2017-08-08
Category: Technology: Switching/L2, VLAN and Bridging, Vendor: HP/HPE
Description: HP ICF SNMP MIB for Rapid Per-VLAN Spanning Tree (RPVST+) configuration and port state on HP ProCurve switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HP-ICF-RPVST-MIB?
HP-ICF-RPVST-MIB is part of HP's ICF (Internetworking Core Facility) private enterprise MIB family, covering Rapid Per-VLAN Spanning Tree Plus (RPVST+) configuration and per-port state on HP ProCurve switches. It exposes per-port, per-VLAN spanning tree data through a dedicated port table, letting an administrator see how each switch port is participating in spanning tree on a VLAN-by-VLAN basis. Although RPVST+ is a Layer 2 protocol rather than a physical sensor, the data it exposes is used for software-level health monitoring of the switch: detecting ports stuck in blocking state, unexpected topology changes, or loop-prevention failures that would otherwise degrade or take down the network. It extends the concepts of the standard IEEE 802.1D/802.1w spanning tree and Q-BRIDGE-MIB world into HP's own per-VLAN instance model, so it depends conceptually on those standards even though it is implemented as an HP-private extension. It is deployed on HP ProCurve (and later Aruba-branded) enterprise LAN switches in campus networks that use per-VLAN spanning tree for loop prevention. Engineers can download the HP-ICF-RPVST-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-RPVST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- HP ProCurve switches
- HP ICF-based enterprise LAN switches
Monitoring Examples
An administrator would poll hpicfRpvstPortTable (and its implied hpicfRpvstPortEntry rows) to see the RPVST+ state of each switch port on each VLAN, checking for ports that remain in a blocking or discarding state longer than expected. A port unexpectedly transitioning between forwarding and blocking repeatedly would reveal an unstable or flapping spanning-tree topology, often caused by a bad cable, a misconfigured trunk, or an accidental physical loop.
What Can Be Monitored
- per-VLAN spanning tree port state (forwarding/blocking/listening)
- RPVST+ port role per VLAN
- VLAN-to-spanning-tree-instance mapping
- port participation in per-VLAN STP
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| BridgeId |
From HP-ICF-OID
| hpSwitch | OBJECT-IDENTITY |
From HP-ICF-TC
| StpPortRole |
From Q-BRIDGE-MIB
| VlanIndex |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using hpicfRpvstVlanRootChangeCounter OID:
Select an HP ProCurve/Aruba switch (Rapid Per-VLAN Spanning Tree Plus) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpicfRpvstVlanRootChangeCounter into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of times the root has changed for this VLAN. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hpicfRpvstMIB | 1.3.6.1.4.1.11.2.14.11.5.1.88 | The MIB module Rapid Per VLAN Spanning Tree(RPVST). | ||
| hpicfRpvstNotifications | 1.3.6.1.4.1.11.2.14.11.5.1.88.0 | |||
| INT hpicfRpvstErrantBpduDetector | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.1 | INTEGER | accessible-for-notify | The identifier of the feature generating Errant BPDU trap. |
| MAC hpicfRpvstErrantBpduSrcMac | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.2 | MacAddress | accessible-for-notify | The source MAC address of the port sending Errant BPDU. |
| BRI hpicfRpvstNewRootBridgeId | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.3 | BridgeId | accessible-for-notify | Bridge ID of the new Root. Bridge Id consists of priority and MAC address. |
| BRI hpicfRpvstPreviousRootBridgeId | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.4 | BridgeId | accessible-for-notify | Bridge ID of the previous Root. Bridge Id consists of priority and MAC address. |
| STR hpicfRpvstDesignatedPort | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.5 | DisplayString | accessible-for-notify | Designated Port of the Bridge. |
| VLA hpicfRpvstVlanIndex | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.6 | VlanIndex | accessible-for-notify | VLAN ID |
| I32 hpicfRpvstPortNumber | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.7 | Integer32 | accessible-for-notify | Port number |
| DAT hpicfRpvstRootBridgeChangeTimeStamp | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.8 | DateAndTime | accessible-for-notify | Time when the root changed |
| MAC hpicfRpvstSuperiorBpduSrcMac | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.9 | MacAddress | accessible-for-notify | The source MAC address of the port sending superior BPDU. |
| I32 hpicfRpvstSuperiorBpduSrcPort | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.10 | Integer32 | accessible-for-notify | Port belonging to the Bridge from which the superior BPDU was received. |
| NTF hpicfRpvstErrantBpduReceived | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.11 | This trap generated when an unexpected (errant) BPDU has been received on a port. hpicfRpvstVlanIndex - VLAN instance to which BPDU belongs. hpicfRpvstPortNumber - Port ID on which BPDU received. hpicfRpvstPortVlanErrantBpduRxCount - Total number of errant BPDU received on the port which belongs to VLAN hpicfRpvstVlanId. hpicfRpvstPortState - State of this port. hpicfRpvstPortVlanDesigBridge - Designated Bridge that transmitted this BPDU. hpicfRpvstDesignatedPort - Designated port of the Bridge that transmitted this BPDU. hpicfRpvstErrantBpduSrcMac- Source MAC address of the port sending this Errant trap. hpicfRpvstErrantBpduDetector - The identifier of the feature generating Errant BPDU Trap. | ||
| NTF hpicfRpvstNewRoot | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.12 | Trap generated when sending agent has become the new root of spanning Tree for the specified VLAN; the notification is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. hpicfRpvstVlanIndex - VLAN instance in which new root is elected. hpicfRpvstNewRootBridgeId - Bridge ID of the new root elected. hpicfRpvstPreviousRootBridgeId - Bridge ID of the previous root. hpicfRpvstRootBridgeChangeTimeStamp - Time when the root bridge changed. | ||
| NTF hpicfRpvstRootGuardInconsistency | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.13 | Trap generated when a Root Guard feature enabled port receives superior BPDUs on its interface for a given VLAN instance. hpicfRpvstVlanIndex - Vlan Instance to which BPDU belongs. hpicfRpvstPortNumber - Port ID where root-inconsistency occurred. hpicfRpvstSuperiorBpduSrcMac - The source MAC address of the port sending superior BPDU. hpicfRpvstSuperiorBpduSrcPort - Port belonging to the Bridge, which transmitted the superior BPDU. | ||
| NTF hpicfRpvstLoopGuardInconsistency | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.14 | Trap generated when a Loop Guard feature enabled port stops receiving BPDUs from its designated port for a given VLAN instance but keeps the port in blocked state. hpicfRpvstVlanIndex - Vlan Instance in which no BPDU received. hpicfRpvstPortNumber - Port ID where loop-inconsistency occurred. hpicfRpvstPortVlanDesigBridge - Designated Bridge this port was expecting to receive the BPDU. | ||
| I32 hpicfRpvstOldPortRole | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.15 | Integer32 | accessible-for-notify | Old Port state |
| I32 hpicfRpvstNewPortRole | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.16 | Integer32 | accessible-for-notify | new port state |
| DAT hpicfRpvstTopoChangeTime | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.17 | DateAndTime | accessible-for-notify | topo change time |
| NTF hpicfRpvstTopologyChange | 1.3.6.1.4.1.11.2.14.11.5.1.88.0.18 | Trap generated whenever topology change detected on this port- vlan pair. hpicfRpvstVlanIndex - Vlan Instance for which topology change detected. hpicfRpvstPortNumber - Port ID for which topology change detected. hpicfRpvstOldPortRole - Old role of this port before topology change. hpicfRpvstNewPortRole - New state of this port after topology change. hpicfRpvstTopoChangeTime - Time at which the topology change happened for this port. | ||
| hpicfRpvstObjects | 1.3.6.1.4.1.11.2.14.11.5.1.88.1 | |||
| hpicfRpvstGeneralGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.1 | |||
| T/F hpicfRpvstResetCounters | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.1.1 | TruthValue | read-write | Setting this object to true(1) will reset all the RPVST counters. Setting this to false(2) is no operation. |
| T/F hpicfRpvstExtendedSystemID | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.1.2 | TruthValue | read-write | Indicates whether Extended System ID feature is enabled or not. |
| T/F hpicfRpvstIgnorePVIDInconsistency | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.1.3 | TruthValue | read-write | Setting this object to True(1) will enable RPVST to run on mismatched PVID links.Once set it will apply to all RPVST instances |
| INT hpicfRpvstPathCostMode | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.1.5 | INTEGER | read-write | hpicfRpvstPathCostMode controls which pathcost mode to use. A device can function in one of the 2 modes defined below. pathCost8021d - The device calculates the default path cost for ports based on IEEE 802.1d. pathCost8021t - The device calculates the default path cost for ports based on IEEE 802.1t. proprietary -The device calculates the default path cost for ports based on the proprietary standard. Link Speed Vs Pathcost Table ---------------------------------------------------------- |Link speed| Pathcost in | Pathcost in | Pathcost in | | | IEEE802.1d | IEEE 802.1t | private standard| ---------------------------------------------------------- | 0 | 65535 | 200,000,000 | 200,000 | ---------------------------------------------------------- | 10 Mbps | 100 | 2,000,000 | 2,000 | ---------------------------------------------------------- | 100 Mbp | 19 | 200,000 | 200 | ---------------------------------------------------------- | 1000 Mbp | 4 | 20,000 | 20 | ---------------------------------------------------------- | 10 Gbps | 2 | 2,000 | 2 | ---------------------------------------------------------- |
| hpicfRpvstVlanTable | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2 | not-accessible | Information describing the RPVST configuration and statistics of the VLANs. | |
| hpicfRpvstVlanEntry | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1 | not-accessible | Information describing the RPVST configuration and statistics of each of the VLANs. | |
| VLA hpicfRpvstVlanId | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.1 | VlanIndex | not-accessible | A VLAN ID to uniquely identifying the entries. |
| I32 hpicfRpvstVlanHelloTime | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.2 | Integer32 | read-write | The amount of time between the transmission of configuration BPDUs by this node on any port in this VLAN when it is root of the spanning tree, or trying to become so for this VLAN. |
| I32 hpicfRpvstVlanForwardDelay | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.3 | Integer32 | read-write | The amount of time between transitioning from listening to learning and learning to forwarding by this node on any port when it is acting as a root for this VLAN. |
| I32 hpicfRpvstVlanMaxAge | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.4 | Integer32 | read-write | The maximum age of RPVST information learned from the network on any port before it is discarded. |
| I32 hpicfRpvstVlanPriority | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.5 | Integer32 | read-write | The value of the write-able portion of the Bridge ID (i.e., the first two octets of the (8 octet long) Bridge ID). The other (last) 6 octets of the Bridge ID are given by the value dot1dBridgeBaseAddress. |
| INT hpicfRpvstVlanRoot | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.6 | INTEGER | read-write | To explicitly configure this switch to be primary/secondary root for this VLAN. |
| INT hpicfRpvstVlanRpvstStatus | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.7 | INTEGER | read-write | To enable/disable RPVST on the VLAN. |
| T/F hpicfRpvstVlanResetCounters | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.8 | TruthValue | read-write | Setting this object to true(1) will reset the RPVST counters for this VLAN. |
| I32 hpicfRpvstVlanOperHelloTime | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.9 | Integer32 | read-only | The amount of time between the transmission of BPDUs by this node on any port in this VLAN when it is root of the spanning tree, or trying to become so for this VLAN. This is the actual value that this bridge is using. |
| I32 hpicfRpvstVlanRootPriority | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.10 | Integer32 | read-only | The priority of root bridge in this VLAN. |
| I32 hpicfRpvstVlanRootPort | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.11 | Integer32 | read-only | The root port for this VLAN. |
| I32 hpicfRpvstVlanRootPathCost | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.12 | Integer32 | read-only | The path cost to the Root from this bridge in this VLAN. |
| MAC hpicfRpvstVlanRootMacAddress | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.13 | MacAddress | read-only | MAC address of the Root in this VLAN. |
| C32 hpicfRpvstVlanRootChangeCounterEx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.14 | Counter32 | read-only | The number of times the root has changed for this VLAN. |
| TIK hpicfRpvstVlanTimeSinceLastTopoChange | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.15 | TimeTicks | read-only | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity for this VLAN. |
| C32 hpicfVlanTopoChangeCount | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.16 | Counter32 | read-only | The total number of topology changes detected by this bridge in this VLAN since the management entity was last reset or initialized. |
| T/F hpicfRpvstSendTopoChangeCtrl | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.17 | TruthValue | read-write | Setting this object to true(1) will enable sending of SNMP notifications for all topology change events on this VLAN. |
| T/F hpicfRpvstLogPortStateTransitions | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.2.1.18 | TruthValue | read-write | Setting this object to true(1) will enable event logging of PVST port state transitions for this VLAN. |
| hpicfRpvstPortTable | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3 | not-accessible | Information describing the RPVST specific configuration and statistics of the ports. | |
| hpicfRpvstPortEntry | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1 | not-accessible | Information describing the RPVST specific configuration and statistics of the ports. | |
| I32 hpicfRpvstPortIndex | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.1 | Integer32 | not-accessible | The port number |
| T/F hpicfRpvstPortAdminEdge | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.2 | TruthValue | read-write | The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port. Note that even when this object's value is true(1), the hpicfRpvstOperEdgePort can be false(2) if a BPDU has been received. |
| NUM hpicfRpvstPortAdminPointToPoint | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.3 | PointToPoint | read-write | Refer the PointToPoint textual-convention. |
| T/F hpicfRpvstPortAutoEdge | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.4 | TruthValue | read-write | It is used by the Bridge detection state machine for the automatic identification of edge ports. |
| T/F hpicfRpvstPortBpduFiltering | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.5 | TruthValue | read-write | This value indicates whether or not BPDUs need to be filtered on this port. If the value is true(1) the received BPDUs will be dropped and no BPDUs will be transmitted on the port. If the value is false (2) the BPDUs will be processed as usual. |
| T/F hpicfRpvstPortRestrictedTcn | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.6 | TruthValue | read-write | This value indicates whether or not to propagate topology changes to other ports. true(1) causes the port not to propagate topology changes to other ports. |
| T/F hpicfRpvstPortRootGuard | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.7 | TruthValue | read-write | Setting this object to true(1) forces port to not to be selected as root port even if this port has best spanning-tree. |
| T/F hpicfRpvstPortLoopGuard | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.8 | TruthValue | read-write | Setting this object to true(1) causes the forwarding port to move to the blocking state and prevent the blocking port to move to forwarding state when no BPDUs are received, instead goes to loop inconsistent state. |
| T/F hpicfRpvstPortBpduProtection | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.9 | TruthValue | read-write | Setting this true (1) indicates that no BPDUs are expected to be received on this port. At the reception of BPDUs the BPDU protection mechanism will disable this port and port will transition into bpduError state. |
| T/F hpicfRpvstPortIeeeRstBpdu | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.10 | TruthValue | read-write | The hpicfRpvstPortIeeeRstBpdu controls, on a per port basis, whether or not IEEE RST BPDUs will be transmitted and received on VLANs that the port is an untagged member of. The value true(1) means that the port will allow transmission and reception of IEEE RST BPDUs on ports untagged to a VLAN while false(2) means it will not. |
| hpicfRpvstPortVlanTable | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4 | not-accessible | Information describing the RPVST configuration and statistics of the ports in the given VLAN. | |
| hpicfRpvstPortVlanEntry | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1 | not-accessible | Information describing the RPVST configuration and statistics of the ports in the given VLAN. | |
| I32 hpicfRpvstPortVlanPathCost | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.1 | Integer32 | read-write | The contribution of this port to the path cost of paths towards the root which include this port. auto(0) |
| I32 hpicfRpvstPortVlanPriority | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.2 | Integer32 | read-write | The value of the port priority field that is contained in the first (in network byte order) octet of the (2 octet long) Port ID. |
| T/F hpicfRpvstPortVlanResetCounters | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.3 | TruthValue | read-write | Setting this object to true(1) will reset the RPVST counters for this port-vlan pair. Get on this object will always return false(2) |
| STP hpicfRpvstPortVlanRole | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.4 | StpPortRole | read-only | Role played by the port in a given VLAN. |
| INT hpicfRpvstPortVlanState | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.5 | INTEGER | read-only | The port's current state. This state controls what action a port takes on reception of a frame. |
| MAC hpicfRpvstPortVlanDesigBridge | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.6 | MacAddress | read-only | The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment. |
| T/F hpicfRpvstPortVlanOperPointToPoint | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.7 | TruthValue | read-only | true : This value indicates that the MAC is connected to a point-to-point LAN segment; i.e., there is at most one other system attached to the LAN segment. false: This value indicates that the MAC is connected to a non-point-to-point LAN segment; i.e., there can be more than one other system attached to the LAN segment. |
| T/F hpicfRpvstPortVlanOperEdge | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.8 | TruthValue | read-only | The operational status of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port. |
| INT hpicfRpvstPortVlanInconsistencyReason | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.4.1.9 | INTEGER | read-only | The reason for which port is blocked by spanning tree protection function. |
| hpicfRpvstPortVlanRxCountersTable | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5 | not-accessible | A table which contains information about each port-vlan pair. | |
| hpicfRpvstPortVlanRxCountersEntry | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1 | not-accessible | Statistics for each port-vlan pair. | |
| C32 hpicfRpvstPortVlanRpvstBpduRx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.1 | Counter32 | read-only | The number of RPVST BPDUs received on this port-vlan pair. |
| DAT hpicfRpvstPortVlanRpvstBpduRxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.2 | DateAndTime | read-only | Time when hpicfRpvstPortVlanRpvstBpduRxCount counter was last updated. |
| C32 hpicfRpvstPortVlanRstBpduRx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.3 | Counter32 | read-only | The number of RSTP BPDUs received on this port-vlan pair. |
| DAT hpicfRpvstPortVlanRstBpduRxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.4 | DateAndTime | read-only | Time when hpicfRpvstPortVlanRstBpduRxCount counter was last updated. |
| C32 hpicfRpvstPortVlanConfigBpduRx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.5 | Counter32 | read-only | The number of STP config BPDUs received on this port-vlan pair. |
| DAT hpicfRpvstPortVlanConfigBpduRxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.6 | DateAndTime | read-only | Time when hpicfRpvstPortVlanConfigBpduRxCount counter was last updated. |
| C32 hpicfRpvstPortVlanTcnBpduRx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.7 | Counter32 | read-only | The number of Topology Change Notification BPDUs received on this port-vlan pair. |
| DAT hpicfRpvstPortVlanTcnBpduRxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.8 | DateAndTime | read-only | Time when hpicfRpvstPortVlanTcnBpduRxCount counter was last updated. |
| C32 hpicfRpvstPortVlanTcDetectCount | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.9 | Counter32 | read-only | The number of times Topology Change detected on this port-vlan pair. |
| DAT hpicfRpvstPortVlanTcDetectCountLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.10 | DateAndTime | read-only | Time when hpicfRpvstPortVlanTcDetectCount counter was last updated. |
| C32 hpicfRpvstPortVlanTcFlagRx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.11 | Counter32 | read-only | The number of times Topology Change bit was set in the BPDUs received on this port-vlan pair. |
| DAT hpicfRpvstPortVlanTcFlagRxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.12 | DateAndTime | read-only | Time when hpicfRpvstPortVlanTcFlagRxCount counter was last updated. |
| C32 hpicfRpvstPortVlanTcAckFlagRx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.13 | Counter32 | read-only | The number of times TC-ACK bit was set in the BPDUs received on this port-vlan pair. |
| DAT hpicfRpvstPortVlanTcAckFlagRxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.14 | DateAndTime | read-only | Time when hpicfRpvstPortVlanTcAckFlagRxCount counter was last updated. |
| C32 hpicfRpvstPortVlanStarvedBpduCount | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.15 | Counter32 | read-only | The number of times BPDU was not received at scheduled time on this port-vlan pair. |
| DAT hpicfRpvstPortVlanStarvedBpduCountLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.16 | DateAndTime | read-only | Time when hpicfRpvstPortVlanStarvedBpduRxCount counter was last updated. |
| C32 hpicfRpvstPortVlanInvalidBpduRx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.17 | Counter32 | read-only | The number of invalid BPDUs received on this port-vlan pair. |
| DAT hpicfRpvstPortVlanInvalidBpduRxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.18 | DateAndTime | read-only | Time when hpicfRpvstPortVlanInvalidBpduRxCount counter was last updated. |
| C32 hpicfRpvstPortVlanLoopedBackBpduRx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.19 | Counter32 | read-only | The number of times a BPDU is received on the same port from where it was sent on the same VLAN. |
| DAT hpicfRpvstPortVlanLoopedBackBpduRxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.20 | DateAndTime | read-only | Time when hpicfRpvstPortVlanLoopedBackBpduRxCount counter was last updated. |
| C32 hpicfRpvstPortVlanErrantBpduRxCount | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.21 | Counter32 | read-only | The number of BPDUs received on a BPDU-filtering or BPDU-protected enabled port. |
| DAT hpicfRpvstPortVlanErrantBpduRxCountLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.22 | DateAndTime | read-only | Time when hpicfRpvstPortVlanErrantBpduRxCount counter was last updated. |
| C32 hpicfRpvstPortVlanAgedBpduRx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.23 | Counter32 | read-only | The number of aged BPDUs received on this port-vlan pair. |
| DAT hpicfRpvstPortVlanAgedBpduRxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.5.1.24 | DateAndTime | read-only | Time when hpicfRpvstPortVlanAgedBpduRx counter was last updated. |
| hpicfRpvstPortVlanTxCountersTable | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6 | not-accessible | A table which contains statistics for each port-vlan pair. | |
| hpicfRpvstPortVlanTxCountersEntry | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1 | not-accessible | A list of statistics for each port-vlan pair. | |
| C32 hpicfRpvstPortVlanRpvstBpduTx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.1 | Counter32 | read-only | The number of RPVST BPDUs sent on this port-vlan pair. |
| DAT hpicfRpvstPortVlanRpvstBpduTxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.2 | DateAndTime | read-only | The time when hpicfRpvstPortVlanBpduTx counter was last updated. |
| C32 hpicfRpvstPortVlanRstBpduTx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.3 | Counter32 | read-only | The number of RSTP BPDUs sent on this port-vlan pair. |
| DAT hpicfRpvstPortVlanRstBpduTxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.4 | DateAndTime | read-only | Time when hpicfRpvstPortVlanRstBpduTx was last updated. |
| C32 hpicfRpvstPortVlanConfigBpduTx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.5 | Counter32 | read-only | The number of STP config BPDUs sent on this port-vlan pair. |
| DAT hpicfRpvstPortVlanConfigBpduTxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.6 | DateAndTime | read-only | Time when hpicfRpvstPortVlanConfigBpduTx counter was last updated. |
| C32 hpicfRpvstPortVlanTcnBpduTx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.7 | Counter32 | read-only | The number of Topology Change Notification BPDUs sent on this port-vlan pair. |
| DAT hpicfRpvstPortVlanTcnBpduTxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.8 | DateAndTime | read-only | Time when hpicfRpvstPortVlanTcnBpduTx counter was last updated. |
| C32 hpicfRpvstPortVlanTcFlagTx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.9 | Counter32 | read-only | The number of times Topology Change bit was set in BPDUs sent on this port-vlan pair. |
| DAT hpicfRpvstPortVlanTcFlagTxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.10 | DateAndTime | read-only | Time when hpicfRpvstPortVlanTcFlagTx counter was last updated. |
| C32 hpicfRpvstPortVlanTcAckFlagTx | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.11 | Counter32 | read-only | The number of times TC-ACK bit was set in BPDUs sent on this port-vlan pair. |
| DAT hpicfRpvstPortVlanTcAckFlagTxLastUpdated | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.6.1.12 | DateAndTime | read-only | Time when hpicfRpvstPortVlanTcAckFlagTx Counter was last updated. |
| hpicfRpvstVlanRootHistoryTable | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.7 | not-accessible | A table containing the information describing the RPVST root history for each VLAN. | |
| hpicfRpvstVlanRootHistoryEntry | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.7.1 | not-accessible | History of the Roots for the VLANs. | |
| I32 hpicfRpvstVlanRootHistoryIndex | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.7.1.1 | Integer32 | not-accessible | An index which uniquely identifies a row in root history table.The lowest numerical index always holds the most recent root entry.Currently last 10 entries are supported. |
| BRI hpicfRpvstVlanRootBridgeId | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.7.1.2 | BridgeId | read-only | Root bridge Id consisting of Root priority and Root MAC address. |
| DAT hpicfRpvstVlanRootHistoryTime | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.7.1.3 | DateAndTime | read-only | Time when a new root was elected. |
| hpicfRpvstVlanTopologyChangeRxTable | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.8 | not-accessible | A list of entries,one for every topology change event that the switch received on per vlan basis. This table holds entries for last 10 topology change events received on the switch. | |
| hpicfRpvstVlanTopologyChangeRxEntry | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.8.1 | not-accessible | Set of parameters corresponding to topology change event that the switch received on per vlan basis. | |
| I32 hpicfRpvstVlanTopologyChangeRxIndex | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.8.1.1 | Integer32 | not-accessible | An index which uniquely identifies a row in VLAN TC history table. Currently only last 10 entries are supported. |
| DAT hpicfRpvstVlanTopologyChangeRxTime | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.8.1.2 | DateAndTime | read-only | Time at which topology change event was received . |
| MAC hpicfRpvstVlanTopologyChangeRxMacAddress | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.8.1.3 | MacAddress | read-only | MAC address form which TC change is received. |
| I32 hpicfRpvstVlanTopologyChangeRxPortId | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.8.1.4 | Integer32 | read-only | Port on which an RPVST topology change message is recieved. |
| hpicfRpvstVlanTopologyChangeTxTable | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.9 | not-accessible | A list of entries,one for every topology change event that switch originated on per vlan basis . This table holds for last 10 topology change events originated on switch | |
| hpicfRpvstVlanTopologyChangeTxEntry | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1 | not-accessible | Set of parameters corresponding to topology change event that switch originated on per vlan basis. | |
| I32 hpicfRpvstVlanTopologyChangeTxIndex | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1.1 | Integer32 | not-accessible | Agent assigned index to uniquely identify an entry in this table. The lowest numerical index always holds the most recent topoogy change event entry. Currently only last 10 entries are supported. |
| STP hpicfRpvstVlanTopologyChangeTxCurrentPortRole | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1.2 | StpPortRole | read-only | Current port Role in the topology. |
| STP hpicfRpvstVlanTopologyChangeTxPreviousPortRole | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1.3 | StpPortRole | read-only | Previous port Role in the topology |
| DAT hpicfRpvstVlanTopologyChangeTxTime | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1.4 | DateAndTime | read-only | Time at which topology change event was generated. |
| I32 hpicfRpvstVlanTopologyChangeTxPortId | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.9.1.5 | Integer32 | read-only | Port on which an RPVST topology change message originated. |
| hpicfRpvstPortRoleChangeTable | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.10 | not-accessible | A table containing the information describing the RPVST port change history. | |
| hpicfRpvstPortRoleChangeEntry | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.10.1 | not-accessible | History of the port change state. | |
| I32 hpicfRpvstPortRoleChangeIndex | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.10.1.1 | Integer32 | not-accessible | An index which uniquely identifies a row in port role change table. Currently only last 10 entries are supported. |
| STP hpicfRpvstPortRoleChangeCurrentPortRole | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.10.1.2 | StpPortRole | read-only | Current port Role. |
| STP hpicfRpvstPortRoleChangePreviousPortRole | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.10.1.3 | StpPortRole | read-only | Previous port Role . |
| DAT hpicfRpvstPortRoleChangeTime | 1.3.6.1.4.1.11.2.14.11.5.1.88.1.10.1.4 | DateAndTime | read-only | Time when port role changed took place. |
| hpicfRpvstConformance | 1.3.6.1.4.1.11.2.14.11.5.1.88.2 | |||
| hpicfRpvstGroups | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1 | |||
| hpicfRpvstGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.1 | These objects are used for managing/monitoring RPVST global parameters. | ||
| hpicfRpvstVlanGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.2 | These objects are used for managing/monitoring RPVST VLAN parameters. | ||
| hpicfRpvstPortVlanGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.3 | These objects are used for managing/monitoring RPVST port parameters for the VLANs. | ||
| hpicfRpvstPortGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.4 | These objects are used for managing/monitoring RPVST port parameters | ||
| hpicfRpvstPortVlanCounterGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.5 | Group of port-vlan counter objects. | ||
| hpicfRpvstRootHistoryGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.6 | Group of VLAN Root history objects. | ||
| hpicfRpvstNotificationObjectGrp | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.7 | Group of objects required for notifications. | ||
| hpicfRpvstNotificationGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.8 | Group of notifications. | ||
| hpicfRpvstPvst1 | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.9 | Group of object added part of pvst1. | ||
| hpicfRpvstNotificationGroupPvst1 | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.10 | Group of notifications. | ||
| hpicfRpvstNotificationObjectGrpPvst1 | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.11 | Group of objects required for notifications. | ||
| hpicfRpvstTopologyRxGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.12 | Group of objects required for vlan topo change rx. | ||
| hpicfRpvstTopologyTxGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.13 | Group of objects required for vlan topo change tx. | ||
| hpicfRpvstPortRoleChangeGroup | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.14 | Group of objects required for port role change. | ||
| hpicfRpvstPortGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.1.15 | These objects are used for managing/monitoring RPVST port parameters | ||
| hpicfRpvstCompliances | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.2 | |||
| hpicfRpvstCompliance1 | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.2.1 | The compliance statement | ||
| hpicfRpvstCompliance2 | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.2.2 | The compliance statement | ||
| hpicfRpvstCompliance3 | 1.3.6.1.4.1.11.2.14.11.5.1.88.2.2.3 | The compliance statement |
RFC description
Manages Rapid Per VLAN Spanning Tree (RPVST) protocol for HP network switches, tracking port states and topology changes.
Start monitoring HP ProCurve/Aruba switch (Rapid Per-VLAN Spanning Tree Plus) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.