HP-ICF-GPPC-MIB

All MIBs › HP-ICF-GPPC-MIB

Organization: HP Networking

Last Updated: 2009-12-15

Category: Quality of Service, Technology: QoS, Vendor: HP/HPE

Description: HP ICF SNMP MIB for General Port Policy Control (GPPC) managing traffic policy application per port on HP ProCurve switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ICF-GPPC-MIB?

HP-ICF-GPPC-MIB is an HP proprietary MIB for General Purpose Packet Control (GPPC), an HP ProCurve feature for applying traffic-handling policy on a per-port basis, such as directing or filtering packets according to configured criteria. It exposes configuration data describing which policy is applied to a given port rather than live traffic counters. Its monitoring relevance is confirming the software/configuration status of per-port packet-control policy — verifying the correct policy is bound to each port — which matters for troubleshooting unexpected traffic filtering or forwarding behavior, though it doesn't expose hardware health metrics directly. It builds on general per-port policy concepts and complements the standard IF-MIB for port indexing. It was deployed on HP ProCurve switches where administrators needed fine-grained, per-port traffic control beyond standard ACLs, and the HP-ICF-GPPC-MIB download is available to administrators who want to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-GPPC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP ProCurve switches

Monitoring Examples

No sample objects were provided for this module, so specific object names cannot be cited. In general, an administrator would expect to poll per-port policy-assignment objects to confirm which GPPC policy is bound to a given switch port, and to detect a port whose policy assignment doesn't match the intended configuration. Without a captured schema, this remains an inferred rather than a verified monitoring workflow.

Imported Objects

From HP-ICF-OID

hpSwitch

OBJECT-IDENTITY

From Q-BRIDGE-MIB

PortList

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfGppcMIB	1.3.6.1.4.1.11.2.14.11.5.1.41			This MIB module is for HP proprietary General Purpose Packet Control (GPPC)
hpicfGppcConformance	1.3.6.1.4.1.11.2.14.11.5.1.41.1
hpicfGppcMIBCompliances	1.3.6.1.4.1.11.2.14.11.5.1.41.1.1
hpicfGppcMIBCompliance	1.3.6.1.4.1.11.2.14.11.5.1.41.1.1.1			The compliance statement for HP routers implementing the HP-ICF-GPPC-MIB.
hpicfGppcMIBGroups	1.3.6.1.4.1.11.2.14.11.5.1.41.1.2
hpicfGppcGroup	1.3.6.1.4.1.11.2.14.11.5.1.41.1.2.1			A collection of HP proprietary objects to support GPPC.
hpicfGppcAppControlTable	1.3.6.1.4.1.11.2.14.11.5.1.41.2		not-accessible	The application control table. This keeps track of the applications that use GPPC, the policies set by these applications, and information on where/when/how to apply these policies. This information includes the interfaces and VLANs where the policy should be applied, whether it should be applied at ingress or egress, and when it should expire.
hpicfGppcAppControlEntry	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1		not-accessible	An entry in the application control table.
STR hpicfGppcAcAppName	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.1	SnmpAdminString	not-accessible	Name of the application that last modified this row. All applications of the same type should use the same name and should use different instance identifiers to identify themselves uniquely. This is a printable string up to 16 bytes in size.
STR hpicfGppcAcAppInstance	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.2	SnmpAdminString	not-accessible	Instance identifier of the application. This is used to distinguish between different instances of the same application. This is a printable string up to 16 bytes in size.
HPI hpicfGppcAcPolicyName	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.3	HpicfGppcPolicyName	not-accessible	Name of the policy. Each policy is uniquely identified by its name. It is possible to apply the same policy in different manners to different interfaces and VLANs. This is a printable string up to 64 characters in size.
POR hpicfGppcAcIngressIfList	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.4	PortList	read-create	List of interfaces to which this policy applies at ingress.
OCT hpicfGppcAcIngressVlanMap1k	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.5	OCTET STRING	read-create	A string of octets containing one bit per VLAN for VLANS with vlan index values of 0 through 1023. The first octet corresponds to VLANs with vlan index values of 0 through 7, the second octet to VLANs 8 through 15, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at ingress, the corresponding bit is set to '1'.
OCT hpicfGppcAcIngressVlanMap2k	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.6	OCTET STRING	read-create	A string of octets containing one bit per VLAN for VLANS with vlan index values of 1024 through 2047. The first octet corresponds to VLANs with vlan index values of 1024 through 1031, the second octet to VLANs 1032 through 1039, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at ingress, the corresponding bit is set to '1'.
OCT hpicfGppcAcIngressVlanMap3k	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.7	OCTET STRING	read-create	A string of octets containing one bit per VLAN for VLANS with vlan index values of 2048 through 3071. The first octet corresponds to VLANs with vlan index values of 2048 through 2055, the second octet to VLANs 2056 through 2063, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at ingress, the corresponding bit is set to '1'.
OCT hpicfGppcAcIngressVlanMap4k	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.8	OCTET STRING	read-create	A string of octets containing one bit per VLAN for VLANS with vlan index values of 3072 through 4095. The first octet corresponds to VLANs with vlan index values of 3072 through 3079, the second octet to VLANs 3080 through 3087, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at ingress, the corresponding bit is set to '1'.
POR hpicfGppcAcEgressIfList	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.9	PortList	read-create	List of interfaces to which this policy applies at egress.
OCT hpicfGppcAcEgressVlanMap1k	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.10	OCTET STRING	read-create	A string of octets containing one bit per VLAN for VLANS with vlan index values of 0 through 1023. The first octet corresponds to VLANs with vlan index values of 0 through 7, the second octet to VLANs 8 through 15, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at egress, the corresponding bit is set to '1'.
OCT hpicfGppcAcEgressVlanMap2k	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.11	OCTET STRING	read-create	A string of octets containing one bit per VLAN for VLANS with vlan index values of 1024 through 2047. The first octet corresponds to VLANs with vlan index values of 1024 through 1031, the second octet to VLANs 1032 through 1039, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at egress, the corresponding bit is set to '1'.
OCT hpicfGppcAcEgressVlanMap3k	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.12	OCTET STRING	read-create	A string of octets containing one bit per VLAN for VLANS with vlan index values of 2048 through 3071. The first octet corresponds to VLANs with vlan index values of 2048 through 2055, the second octet to VLANs 2056 through 2063, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at egress, the corresponding bit is set to '1'.
OCT hpicfGppcAcEgressVlanMap4k	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.13	OCTET STRING	read-create	A string of octets containing one bit per VLAN for VLANS with vlan index values of 3072 through 4095. The first octet corresponds to VLANs with vlan index values of 3072 through 3079, the second octet to VLANs 3080 through 3087, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at egress, the corresponding bit is set to '1'.
INT hpicfGppcAcExpPolicy	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.14	INTEGER	read-create	Expiration policy. This indicates whether a policy should expire automatically. 'permanent' means a policy should never expire automatically.
OCT hpicfGppcAcExpString	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.15	OCTET STRING	read-create	Expiration string. This is used in conjuntion with hpicfGppcAcExpPolicy to indicate when a policy should expire automatically. The value stored in this object is interpreted differently for different expiration policies. When the expiration policy is 'permanent', this value is ignored.
INT hpicfGppcAcLastErrorCode	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.16	INTEGER	read-only	Error code of the last error that occurred. A non-zero value indicates that the last operation performed by this instance of the application on the named policy did not succeed. A detailed description of the error is available in hpicfGppcAcLastErrorString.
OCT hpicfGppcAcLastErrorString	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.17	OCTET STRING	read-only	Description of the last error that occurred. This is a printable ASCII string that describes the error in some detail.
INT hpicfGppcAcRowAdminStatus	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.18	INTEGER	read-create	Administrative status of this row. The named policy in this row is applied to the interfaces and/or VLANs by this instance of the application only when the administrative status is enabled. This is the main on/off switch for the row. The row status must be active for this switch to have an effect.
ROW hpicfGppcAcRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.19	RowStatus	read-create	Status of this row. Row status must be active, and the admin status (see hpicfGppcAcRowAdminStatus) must be enabled for this row to be activated.
hpicfGppcNamedPolicyTable	1.3.6.1.4.1.11.2.14.11.5.1.41.3		not-accessible	The named policy table. This table lists the name and type of all policies that are applied via GPPC.
hpicfGppcNamedPolicyEntry	1.3.6.1.4.1.11.2.14.11.5.1.41.3.1		not-accessible	An entry in the named policy table.
HPI hpicfGppcNpPolicyName	1.3.6.1.4.1.11.2.14.11.5.1.41.3.1.1	HpicfGppcPolicyName	not-accessible	Name of the policy. The name of a policy is its unique identification. It is a printable string in ASCII characters. It can be up to 64 characters in length
INT hpicfGppcNpPolicyType	1.3.6.1.4.1.11.2.14.11.5.1.41.3.1.2	INTEGER	read-create	Type of the policy. A policy type of 'mac-based-mirroring' indicates that the policy is used to mirror traffic based on the MAC address of the source or destination.
ROW hpicfGppcNpRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.41.3.1.3	RowStatus	read-create	Status of this row. The named policy must be active before rules can be added to it or removed from it. A newly created policy will remain in notReady state until it is given a valid policy type (see hpicfGppcNpPolicyType). A row in the named policy table can not be deleted if the named policy is referenced by a row in the application control table. The application control entries that refer to this row must be deleted before this row can be deleted.
hpicfGppcPolicyRulesTable	1.3.6.1.4.1.11.2.14.11.5.1.41.4		not-accessible	The policy rules table. A policy can consist of multiple rules. All of the rules of a policy are listed in this table. Each rule consists of a string and a numeric identifier - the rule id.
hpicfGppcPolicyRulesEntry	1.3.6.1.4.1.11.2.14.11.5.1.41.4.1		not-accessible	An entry in the policy rules table.
I32 hpicfGppcPrRuleId	1.3.6.1.4.1.11.2.14.11.5.1.41.4.1.1	Integer32	not-accessible	Numeric identifier of the rule. The rules in a policy are processed sequentially in increasing order of their rule ids. These numeric ids are generated by the application that creates the policy. Rules within a policy have unique rule ids.
OCT hpicfGppcPrPolicyRule	1.3.6.1.4.1.11.2.14.11.5.1.41.4.1.2	OCTET STRING	read-create	Rule string. This is a string that represents one rule in the policy. A policy can consist of one or many rules.
ROW hpicfGppcPrRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.41.4.1.3	RowStatus	read-create	Status of this row. A rule must have an active row status in order to take effect. Only active rules within the named policy are applied when an application applies the policy. It is possible to use this row status as an on/off switch for enabling or disabling selected rules within a policy. A newly created rule will remain in notReady state until it is given a valid rule string (see hpicfGppcPrPolicyRule).

RFC description

Manages General Purpose Packet Control (GPPC) policies for traffic control on HP network switches.

Start monitoring HP ProCurve switch (General Purpose Packet Control, per-port policy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-GPPC-MIB

What Is HP-ICF-GPPC-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description