HP-ICF-DEVICE-MONITOR-MIB

All MIBs › HP-ICF-DEVICE-MONITOR-MIB

Organization: HPE Networking

Last Updated: 2021-01-04

Category: Device Management, Hardware and Environment, Technology: Network Monitoring, Vendor: HP/HPE

Description: HP ICF SNMP MIB for device health monitoring including CPU, memory, and environment threshold alerts on HP ProCurve switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ICF-DEVICE-MONITOR-MIB?

HP-ICF-DEVICE-MONITOR-MIB is an HP proprietary MIB for the Device Monitoring feature within the HPE/HP Integrated Communication Facility product line, providing threshold-based health monitoring on HP ProCurve and Aruba switches. It is expected to expose objects for configuring and reporting CPU utilization, memory usage, and environmental (e.g. temperature) thresholds, along with alert or notification status when a configured threshold is crossed. This is explicitly a hardware/software health-monitoring MIB, used to watch CPU load, memory consumption, and environmental conditions and to raise proactive alerts before a device becomes overloaded or overheated. It likely works alongside HP-ICF-CHASSIS for underlying sensor data and general host-resource concepts. It is deployed on HPE/HP ProCurve and Aruba switches where administrators want proactive alerting on CPU, memory, or environmental thresholds. Engineers can download the HP-ICF-DEVICE-MONITOR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-DEVICE-MONITOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HPE/HP ProCurve switch
HP Aruba (ICF-based) switch

Monitoring Examples

No specific object or table names were captured in the sampled data for this module, so a concrete OID-level example cannot be given; consistent with its description, an administrator would configure CPU, memory, and environmental thresholds and then receive an alert when one is exceeded - for example, a sustained high-CPU condition on a switch's control plane triggering a notification before the device becomes unresponsive.

What Can Be Monitored

CPU utilization threshold
memory usage threshold
environmental threshold alerts
device health alert status

Imported Objects

From HP-ICF-OID

hpSwitch

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfDeviceFingerPrintMIB	1.3.6.1.4.1.11.2.14.11.5.1.138			This MIB module describes objects for managing the Device Monitoring feature of devices in the HPE Integrated Communication Facility product line.
hpicfDevFingerPrinNotifications	1.3.6.1.4.1.11.2.14.11.5.1.138.0
hpicfDevFingerPrinObjects	1.3.6.1.4.1.11.2.14.11.5.1.138.1
hpicfDevFingerPrinConfigObjects	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1
hpicfDevFingerPrinScalarObjects	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.1
hpicfDevFingerPrinProfileTable	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.2		not-accessible	This table is to create device monitor profile. There can be a maximum of 32 profiles.
hpicfDevFingerPrinProfileEntry	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.2.1		not-accessible	This table is to create device monitor profile. There can be a maximum of 32 profiles.
STR hpicfDevFingerPrinProfileName	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.2.1.1	DisplayString	not-accessible	Name of the device monitor profile. A name can have maximum 32 characters.
ROW hpicfDFPProfRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.2.1.2	RowStatus	read-create	Status of this row, by which new entries may be created or existing entries deleted from this table.
hpicfDFPProfOptionTable	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.3		not-accessible	This table stores the possible configuration option for a device monitor profile.
hpicfDFPProfOptionEntry	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.3.1		not-accessible	This table stores the possible configuration option allowed for a device monitor profile.
INT hpicfDFPProfOptionType	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.3.1.1	INTEGER	not-accessible	This object specifies the possible option available for device monitor profile: apply(1) To apply this profile on a port. dhcp(2) Configure device monitor filter using DHCP protocol option for this profile. http(3) Configure device monitor filter using HTTP protocol option for this profile. lldp(4) Configure device monitor filter using LLDP protocol TLVs for this profile. cdp(5) Configure device monitor filter using CDP protocol TLVs for this profile. protocol(6) Configure device monitor filter using protocol connection type and port for this profile.
ROW hpicfDFPProfOptionRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.3.1.2	RowStatus	read-create	Status of this row, by which new entries may be created or existing entries deleted from this table.
hpicfDFPProfProtoEncodTable	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.4		not-accessible	This table stores device monitor filter for DHCP, HTTP, LLDP and CDP protocol attribute for this device monitor profile.
hpicfDFPProfProtoEncodEntry	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.4.1		not-accessible	This table stores device monitor filter for DHCP, HTTP, LLDP and CDP protocol attribute for this device monitor profile.
INT hpicfDFPProfProtoEncodType	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.4.1.1	INTEGER	not-accessible	This object specifies protocol encoding scheme used by protocol. optionNumber(1) Configure protocol filter using Option number. optionName(2) Configure protocol filter using Option name. tlvNumber(3) Configure protocol filter using TLV number. tlvName(4) Configure protocol filter using TLV name. optionsList(5) Configure the collection of options list.
ROW hpicfDFPProfProtoEncodRowStat	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.4.1.2	RowStatus	read-create	Status of this row, by which new entries may be created or existing entries deleted from this table.
hpicfDFPProfAttrEncodTable	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.5		not-accessible	This table stores device monitor filter for DHCP, HTTP, LLDP and CDP protocol attribute for this device monitor profile.
hpicfDFPProfAttrEncodEntry	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.5.1		not-accessible	This table stores device monitor filter for DHCP, HTTP, LLDP and CDP protocol attribute for this device monitor profile.
I32 hpicfDFPProfProtoAttr	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.5.1.1	Integer32	not-accessible	This object specifies protocol attribute to monitor for this profile.
ROW hpicfDFPProfAttrEncodRowStat	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.5.1.2	RowStatus	read-create	Status of this row, by which new entries may be created or existing entries deleted from this table.
hpicfDFPProfApplyTable	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.6		not-accessible	This table stores the port and subscriber IP this device monitor profile is associated.
hpicfDFPProfApplyEntry	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.6.1		not-accessible	This table stores the port and subscriber IP this device monitor profile is associated. There can be maximum of 32 records.
NUM hpicfDFPProfApplyPort	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.6.1.1	InterfaceIndex	not-accessible	This object specifies the switch port to apply this profile.
ROW hpicfDFPProfApplyRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.6.1.2	RowStatus	read-create	Status of this row, by which new entries may be created or existing entries deleted from this table.
hpicfDFPProfProtoConnTable	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.7		not-accessible	This table stores device monitor filter using protocol connection type and port for this profile.
hpicfDFPProfProtoConnEntry	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.7.1		not-accessible	This table stores protocol attribute for device monitor profile using connection type and port.
INT hpicfDFPProfProtoConnType	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.7.1.1	INTEGER	not-accessible	This object specifies protocol connection type.
I32 hpicfDFPProfProtoConnPort	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.7.1.2	Integer32	not-accessible	This object specifies protocol port used during connection.
I32 hpicfDFPProfProtoConnOffset	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.7.1.3	Integer32	not-accessible	This object specifies the protocol offset for device monitor filter.
I32 hpicfDFPProfProtoConnWidth	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.7.1.4	Integer32	not-accessible	This object specifies the protocol width for device monitor filter.
ROW hpicfDFPProfProtoConnRowStat	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.7.1.5	RowStatus	read-create	Status of this row, by which new entries may be created or existing entries deleted from this table.
hpicfDevFingerPrinPortTable	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.8		not-accessible	This table is to create device monitor timer.
hpicfDevFingerPrinPortEntry	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.8.1		not-accessible	This table is to create device monitor Port.
NUM hpicfDevFingerPrinPortNumber	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.8.1.1	InterfaceIndex	not-accessible	Each port number to be set with the number of clients supported in that port.
I32 hpicfDevFingerPrinMaxNumber	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.8.1.2	Integer32	not-accessible	Max allowed interface number to be set.
ROW hpicfDFPPortRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.8.1.3	RowStatus	read-create	Status of this row, by which new entries may be created or existing entries deleted from this table.
hpicfDFPClientConfigTable	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.9		not-accessible	This table is to create configuration used to manage clients when Device finger priniting is enabled.
hpicfDFPClientConfigEntry	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.9.1		not-accessible	The configuration information on port.
NUM hpicfDFPConfigPort	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.9.1.1	InterfaceIndex	not-accessible	This object specifies the switch port for configuration.
INT hpicfDFPConfigIncomingClients	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.9.1.2	INTEGER	read-write	This object is to start fingerprinting for the clients that comes in after enabling fingerprinting feature.
I32 hpicfDFPConfigClientLimit	1.3.6.1.4.1.11.2.14.11.5.1.138.1.1.9.1.3	Integer32	read-write	This object specifies the number of client limit supported on the port.
hpicfDevFingerPrinStatsObjects	1.3.6.1.4.1.11.2.14.11.5.1.138.1.2
hpicfDFPClientStatsTable	1.3.6.1.4.1.11.2.14.11.5.1.138.1.2.1		not-accessible	A table that contains client details and the protocol attributes monitored on the client protocol packets.
hpicfDFPClientStatsEntry	1.3.6.1.4.1.11.2.14.11.5.1.138.1.2.1.1		not-accessible	A table that contains client details and the protocol attributes monitored on the client protocol packets.
NUM hpicfDevFingerPrinClientPort	1.3.6.1.4.1.11.2.14.11.5.1.138.1.2.1.1.1	InterfaceIndex	not-accessible	This object specifies the port were the client is monitored.
MAC hpicfDevFingerPrinClientMacAddr	1.3.6.1.4.1.11.2.14.11.5.1.138.1.2.1.1.2	MacAddress	not-accessible	This object specifies the MAC address of the client.
STR hpicfDevFingerPrinClientProfile	1.3.6.1.4.1.11.2.14.11.5.1.138.1.2.1.1.3	DisplayString	read-only	This object specifies the name of the device monitor profile applied to the client.
STR hpicfDFPClientDevCategory	1.3.6.1.4.1.11.2.14.11.5.1.138.1.2.1.1.4	DisplayString	read-only	This object specifies the device category the client belongs too.
STR hpicfDFPClientDevOsFamily	1.3.6.1.4.1.11.2.14.11.5.1.138.1.2.1.1.5	DisplayString	read-only	This object specifies the device operating system the client belongs too.
STR hpicfDFPClientDevName	1.3.6.1.4.1.11.2.14.11.5.1.138.1.2.1.1.6	DisplayString	read-only	This object specifies the device name of the client.
INT hpicfDFPClientStatus	1.3.6.1.4.1.11.2.14.11.5.1.138.1.2.1.1.7	INTEGER	read-only	This object specifies the current status of the client.
hpicfDevFingerPrinGlobalObjects	1.3.6.1.4.1.11.2.14.11.5.1.138.1.3
U32 hpicfDevFingerPrinTimer	1.3.6.1.4.1.11.2.14.11.5.1.138.1.3.1	Unsigned32	read-write	The time interval to sync with finger printing server.
hpicfDevFingerPrinConformance	1.3.6.1.4.1.11.2.14.11.5.1.138.2
hpicfDevFingerPrinCompliances	1.3.6.1.4.1.11.2.14.11.5.1.138.2.1
hpicfDevFingerPrinCompliance1	1.3.6.1.4.1.11.2.14.11.5.1.138.2.1.1			The compliance statement
hpicfDevFingerPrinCompliance2	1.3.6.1.4.1.11.2.14.11.5.1.138.2.1.2			The compliance statement
hpicfDevFingerPrinCompliance3	1.3.6.1.4.1.11.2.14.11.5.1.138.2.1.3			The compliance statement
hpicfDevFingerPrinGroups	1.3.6.1.4.1.11.2.14.11.5.1.138.2.2
hpicfDevFingerPrinProfileGroup	1.3.6.1.4.1.11.2.14.11.5.1.138.2.2.1			These objects are used for managing Device Monitor configuration parameters.
hpicfDFPClientStatsGroup	1.3.6.1.4.1.11.2.14.11.5.1.138.2.2.2			A collection of objects providing statistics about current client device type learned using device monitor.
hpicfDFPClientStatsGroup1	1.3.6.1.4.1.11.2.14.11.5.1.138.2.2.3			A collection of objects providing statistics about current client device type learned using device monitor.
hpicfDFPClientConfigGroup	1.3.6.1.4.1.11.2.14.11.5.1.138.2.2.4			These objects are used for managing the incoming clients when Device fingerprinting is enabled.
hpicfDevFingerPrinProfileGroup1	1.3.6.1.4.1.11.2.14.11.5.1.138.2.2.5			These objects are used for managing Device Monitor configuration parameters.
hpicfDFPClientConfigGroup1	1.3.6.1.4.1.11.2.14.11.5.1.138.2.2.6			These objects are used for managing the incoming clients when Device fingerprinting is enabled.

RFC description

HPE Integrated Communication Facility MIB for device fingerprinting and monitoring client identity and protocol configuration on switches.

Start monitoring HPE/HP ProCurve/Aruba switch (CPU/memory/environmental threshold alerting) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-DEVICE-MONITOR-MIB

What Is HP-ICF-DEVICE-MONITOR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description