HP-ACCT-MIB

All MIBs › HP-ACCT-MIB

Organization: HP Networking

Last Updated: 2014-08-04

Category: Domain: Security, RADIUS and AAA, Vendor: HP/HPE

Description: HP SNMP MIB for accounting management on HP networking devices, tracking session and usage records for AAA accounting.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ACCT-MIB?

HP-ACCT-MIB is an HP proprietary MIB from the HP Integrated Communication Facility (ICF) product line, providing objects for managing accounting services — tracking usage/session records typically associated with dial-up, AAA, or similar access services on HP networking devices. It exposes configuration and status data related to accounting record generation rather than interface or environmental telemetry. Its monitoring relevance is software/service status — confirming the accounting service itself is enabled and functioning so that usage records are reliably captured for billing, auditing, or compliance purposes, rather than hardware health metrics like temperature or fan speed. It depends conceptually on general AAA/accounting frameworks (similar to RADIUS accounting) though implemented as an HP-private schema. It was typically deployed on older HP ICF-based access/communication devices where administrators needed visibility into whether usage accounting was actively being recorded. Engineers can download the HP-ACCT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ACCT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Integrated Communication Facility (ICF) networking devices

Monitoring Examples

No sample objects were provided for this module, so specific object names cannot be cited. In general, an administrator would expect to poll accounting-service status objects to confirm the accounting feature is enabled and actively generating usage records, and check for any accounting-record generation failures. Without a captured schema, this remains an inferred rather than a verified monitoring workflow.

Imported Objects

From HP-ICF-OID

hpSwitch

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpSwitchAccountingMIB	1.3.6.1.4.1.11.2.14.11.5.1.17			This MIB module describes objects for managing the Accounting service features of devices in the HP Integrated Communication Facility product line.
hpSwitchAccountingConfig	1.3.6.1.4.1.11.2.14.11.5.1.17.1
I32 hpSwitchAcctUpdateInterval	1.3.6.1.4.1.11.2.14.11.5.1.17.1.1	Integer32	read-write	Defines periodic intervals to send accounting update records (in minutes).
INT hpSwitchAcctSuppressNullUserName	1.3.6.1.4.1.11.2.14.11.5.1.17.1.2	INTEGER	read-write	An indication of whether accounting records need to be generated for users, whose username string is NULL. If yes(1), then prevent accounting records from being generated.
INT hpSwitchAcctSessionIdentification	1.3.6.1.4.1.11.2.14.11.5.1.17.1.3	INTEGER	read-write	Specifies how accounting sessions for different accounting service types will be identified. unique - use a unique accounting session identifier in accounting records for each accounting service type (network, exec, system, commands). common - use identical accounting session identifier in all accounting records sent out of switch for a given user's access session, irrespective to the accounting service type that generates the records within the session.
hpSwitchAcctServiceTable	1.3.6.1.4.1.11.2.14.11.5.1.17.2		not-accessible	This table lists the accounting service types, accounting methods and the way of how accounting sessions should be initiated or terminated.
hpSwitchAcctServiceEntry	1.3.6.1.4.1.11.2.14.11.5.1.17.2.1		not-accessible	An accounting service table entry.
INT hpSwitchAcctServiceIndex	1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.1	INTEGER	not-accessible	Specifies the accounting service type configured on the switch.
INT hpSwitchAcctServiceMethod	1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.2	INTEGER	read-write	The method used for accounting. A value of none (1) indicates that accounting is not performed. A value of radius (2) indicates that accounting is performed using RADIUS. A value of syslog (3) indicates that accounting is performed using SYSLOG. A value of tacacs (4) indicates that accounting is performed using TACACS+.
INT hpSwitchAcctServiceMode	1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.3	INTEGER	read-write	The mode of sending accounting messages to the server. A value of none (1) indicates that no accounting messages are sent to the server. A value of startStop (2) indicates that a start accounting message is sent to the server at the beginning of an event and a stop accounting message is sent at the end of the event. A value of stopOnly (3) indicates that a stop accounting message is sent at the end of an event. A value of interim update (4) indicates that an accounting message is sent to the server after the command is executed. This option can be set only if the value of hpSwitchAcctServiceIndex is set to 'commands.
STR hpSwitchAcctServiceServerGroupName	1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.4	DisplayString	read-write	The name that defines the RADIUS server group that this authentication method is associated with. See the documentation for the maximum length of the group name.
hpSwitchAccountingMIBConformance	1.3.6.1.4.1.11.2.14.11.5.1.17.3
hpSwitchAccountingMIBCompliances	1.3.6.1.4.1.11.2.14.11.5.1.17.3.1
hpSwitchAccountingMIBCompliance	1.3.6.1.4.1.11.2.14.11.5.1.17.3.1.1			The compliance statement for devices implementing the HP Accounting Mib.
hpSwitchAccountingMIBGroups	1.3.6.1.4.1.11.2.14.11.5.1.17.3.2
hpSwitchAccountingConfigGroup	1.3.6.1.4.1.11.2.14.11.5.1.17.3.2.1			A collection of objects for configuring the accounting features.

RFC description

MIB for managing accounting service features on HP ICF network switches.

Start monitoring HP Integrated Communication Facility (ICF) networking device (accounting service) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ACCT-MIB

What Is HP-ACCT-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description