All MIBs › HP-ACCT-MIB › hpSwitchAcctServiceMode
hpSwitchAcctServiceMode
Module: HP-ACCT-MIB
OID (symbolic): HP-ACCT-MIB::hpSwitchAcctServiceMode
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The mode of sending accounting messages to the server. A value of none (1) indicates that no accounting messages are sent to the server. A value of startStop (2) indicates that a start accounting message is sent to the server at the beginning of an event and a stop accounting message is sent at the end of the event. A value of stopOnly (3) indicates that a stop accounting message is sent at the end of an event. A value of interim update (4) indicates that an accounting message is sent to the server after the command is executed. This option can be set only if the value of hpSwitchAcctServiceIndex is set to 'commands.
What is hpSwitchAcctServiceMode?
This read-write INTEGER selects when accounting messages are sent for a service: none(1), startStop(2) sends both start and stop messages, stopOnly(3) sends only a stop message, and interimUpdate(4) sends a message after each command executes (only valid when hpSwitchAcctServiceIndex is 'commands'). Admins choose startStop for full session lifecycle tracking or interimUpdate for command-level auditing. For example, setting this to interimUpdate(4) on the commands service type logs every executed command to the accounting server individually.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.3 snmpwalk -v2c -c public <target> HP-ACCT-MIB::hpSwitchAcctServiceMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.3.1 snmpget -v2c -c public <target> HP-ACCT-MIB::hpSwitchAcctServiceMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.3.1 i <value>
Start monitoring HP Integrated Communication Facility (ICF) networking device (accounting service) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ACCT-MIB::hpSwitchAcctServiceMode OID value, configure state conditions and alerts, and monitor any HP Integrated Communication Facility (ICF) networking device (accounting service) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.17 | hpSwitchAccountingMIB | HP-ACCT-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.17.2 | hpSwitchAcctServiceTable | HP-ACCT-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.17.2.1 | hpSwitchAcctServiceEntry | HP-ACCT-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.3 | hpSwitchAcctServiceMode | HP-ACCT-MIB |