HM800MIB

All MIBs › HM800MIB

Category: Device Management, Vendor: Belden

Description: Hirschmann HM800 series switch MIB for device management of legacy HM800 industrial Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HM800MIB?

HM800MIB is documented as covering Hirschmann's legacy HM800 series industrial Ethernet switches, but the object set actually captured for this module (raidExMibRaidListTable, the "hitachi" enterprise arc, storage/DKC objects) points instead to a Hitachi RAID storage array management structure, suggesting the data source for this module conflates or mislabels two distinct device families. Setting that inconsistency aside, the concrete objects present describe RAID array/controller ("DKC") identity and inventory: a table of RAID units with serial number, MIB nickname, DKC (disk controller) firmware version, and product name. In terms of hardware/software status monitoring, these objects inventory and identify storage controller hardware — reporting serial number, hardware/firmware version, and product identity for each RAID/DKC unit rather than classic switch metrics like port counters or spanning-tree state. No clear standard-MIB dependency is evident beyond the vendor's own enterprise tree. Given the object naming, the data associated with this module name is most plausibly used for identifying/inventorying Hitachi RAID storage controller units rather than industrial switches as the label implies, so administrators should download the HM800MIB file and inspect it directly before assuming it describes Hirschmann switch hardware.

IPNetwork Monitor allows you to monitor SNMP objects defined in HM800MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Hitachi RAID storage array / DKC disk controller units (mislabeled as Hirschmann HM800 in source data; enterprise OID 116 confirms Hitachi)

Monitoring Examples

Based on the objects actually present, an admin would poll raidExMibRaidListTable/raidExMibRaidListEntry to enumerate attached RAID units, reading raidlistSerialNumber, raidlistDKCMainVersion, and raidlistDKCProductName to confirm each controller's identity and firmware revision. raidExMibDKCHWTable would be checked for further DKC (disk controller) hardware detail. Because these objects don't match the switch-oriented short description normally associated with HM800MIB, this example should be read as reflecting the actual sample data provided rather than confirmed Hirschmann HM800 switch behavior.

What Can Be Monitored

RAID unit serial number
DKC controller hardware/firmware version
RAID/DKC product name
RAID unit list inventory

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hitachi	1.3.6.1.4.1.116
system	1.3.6.1.4.1.116.3
storage	1.3.6.1.4.1.116.3.11
raid	1.3.6.1.4.1.116.3.11.4
raidDummy	1.3.6.1.4.1.116.3.11.4.1
raidRoot	1.3.6.1.4.1.116.3.11.4.1.1
NTF raideventUseracute	1.3.6.1.4.1.116.3.11.4.1.1.0.1			The impact of this event on the subsystem is acute.
NTF raideventUserserious	1.3.6.1.4.1.116.3.11.4.1.1.0.2			The impact of this event on the subsystem is serious.
NTF raideventUsermoderate	1.3.6.1.4.1.116.3.11.4.1.1.0.3			The impact of this event on the subsystem is moderate.
NTF raideventUserservice	1.3.6.1.4.1.116.3.11.4.1.1.0.4			The impact of this event on the subsystem is low.
systemExMib	1.3.6.1.4.1.116.5
storageExMib	1.3.6.1.4.1.116.5.11
raidExMib	1.3.6.1.4.1.116.5.11.4
raidExMibDummy	1.3.6.1.4.1.116.5.11.4.1
raidExMibRoot	1.3.6.1.4.1.116.5.11.4.1.1
STR raidExMibName	1.3.6.1.4.1.116.5.11.4.1.1.1	DisplayString	read-only	Product name of the SVP.
STR raidExMibVersion	1.3.6.1.4.1.116.5.11.4.1.1.2	DisplayString	read-only	SVP micro-program version.
STR raidExMibAgentVersion	1.3.6.1.4.1.116.5.11.4.1.1.3	DisplayString	read-only	Extension Agent version.
INT raidExMibDkcCount	1.3.6.1.4.1.116.5.11.4.1.1.4	INTEGER	read-only	Number of DKC which is registered on the SVP.
raidExMibRaidListTable	1.3.6.1.4.1.116.5.11.4.1.1.5		not-accessible	List of DKC which is registered on the SVP.
raidExMibRaidListEntry	1.3.6.1.4.1.116.5.11.4.1.1.5.1		not-accessible	Entry of DKC list.
INT raidlistSerialNumber	1.3.6.1.4.1.116.5.11.4.1.1.5.1.1	INTEGER	read-only	Serial Number of the DKC.
STR raidlistMibNickName	1.3.6.1.4.1.116.5.11.4.1.1.5.1.2	DisplayString	read-only	Nickname of the DKC.
STR raidlistDKCMainVersion	1.3.6.1.4.1.116.5.11.4.1.1.5.1.3	DisplayString	read-only	DKC Firmware Version.
STR raidlistDKCProductName	1.3.6.1.4.1.116.5.11.4.1.1.5.1.4	DisplayString	read-only	DKC Product Name.
raidExMibDKCHWTable	1.3.6.1.4.1.116.5.11.4.1.1.6		not-accessible	Error information of the DKC.
raidExMibDKCHWEntry	1.3.6.1.4.1.116.5.11.4.1.1.6.1		not-accessible	Entry of DKC information.
INT dkcRaidListIndexSerialNumber	1.3.6.1.4.1.116.5.11.4.1.1.6.1.1	INTEGER	read-only	Serial Number the DKC.
INT dkcHWProcessor	1.3.6.1.4.1.116.5.11.4.1.1.6.1.2	INTEGER	read-only	Information of processor.
INT dkcHWCSW	1.3.6.1.4.1.116.5.11.4.1.1.6.1.3	INTEGER	read-only	Information of internal bus.
INT dkcHWCache	1.3.6.1.4.1.116.5.11.4.1.1.6.1.4	INTEGER	read-only	Information of cache.
INT dkcHWSM	1.3.6.1.4.1.116.5.11.4.1.1.6.1.5	INTEGER	read-only	Information of shared memory.
INT dkcHWPS	1.3.6.1.4.1.116.5.11.4.1.1.6.1.6	INTEGER	read-only	Information of power supply.
INT dkcHWBattery	1.3.6.1.4.1.116.5.11.4.1.1.6.1.7	INTEGER	read-only	Information of battery.
INT dkcHWFan	1.3.6.1.4.1.116.5.11.4.1.1.6.1.8	INTEGER	read-only	Information of fan.
INT dkcHWEnvironment	1.3.6.1.4.1.116.5.11.4.1.1.6.1.9	INTEGER	read-only	Information of Environment.
raidExMibDKUHWTable	1.3.6.1.4.1.116.5.11.4.1.1.7		not-accessible	Error information of the DKU.
raidExMibDKUHWEntry	1.3.6.1.4.1.116.5.11.4.1.1.7.1		not-accessible	Entry of DKU information.
INT dkuRaidListIndexSerialNumber	1.3.6.1.4.1.116.5.11.4.1.1.7.1.1	INTEGER	read-only	Serial Number of the DKC.
INT dkuHWPS	1.3.6.1.4.1.116.5.11.4.1.1.7.1.2	INTEGER	read-only	Information of DKU power supply.
INT dkuHWFan	1.3.6.1.4.1.116.5.11.4.1.1.7.1.3	INTEGER	read-only	Information of DKU fan.
INT dkuHWEnvironment	1.3.6.1.4.1.116.5.11.4.1.1.7.1.4	INTEGER	read-only	Information of DKU Environment.
INT dkuHWDrive	1.3.6.1.4.1.116.5.11.4.1.1.7.1.5	INTEGER	read-only	Information of Drive.
raidExMibTrapListTable	1.3.6.1.4.1.116.5.11.4.1.1.8		not-accessible	Trap list Table.
raidExMibTrapListEntry	1.3.6.1.4.1.116.5.11.4.1.1.8.1		not-accessible	Trap list Table index.
INT eventListIndexSerialNumber	1.3.6.1.4.1.116.5.11.4.1.1.8.1.1	INTEGER	read-only	Serial Number of the DKC.
STR eventListNickname	1.3.6.1.4.1.116.5.11.4.1.1.8.1.2	DisplayString	read-only	Nickname of the DKC.
CTR eventListIndexRecordNo	1.3.6.1.4.1.116.5.11.4.1.1.8.1.3	Counter	read-only	The record number of the event trap list.
STR eventListREFCODE	1.3.6.1.4.1.116.5.11.4.1.1.8.1.4	DisplayString	read-only	The Reference code of the event trap.
STR eventListDate	1.3.6.1.4.1.116.5.11.4.1.1.8.1.5	DisplayString	read-only	The Date of the event trap.
STR eventListTime	1.3.6.1.4.1.116.5.11.4.1.1.8.1.6	DisplayString	read-only	The Time of the event trap.
STR eventListDescription	1.3.6.1.4.1.116.5.11.4.1.1.8.1.7	DisplayString	read-only	Detail information of reference code.
raidExMibDummyX	1.3.6.1.4.1.116.5.11.4.2
INT eventTrapSerialNumber	1.3.6.1.4.1.116.5.11.4.2.1	INTEGER	not-accessible	Serial Number of HM800 where an error occurred.
STR eventTrapNickname	1.3.6.1.4.1.116.5.11.4.2.2	DisplayString	not-accessible	Nickname of HM800 where an error occurred.
STR eventTrapREFCODE	1.3.6.1.4.1.116.5.11.4.2.3	DisplayString	not-accessible	Error reference code.
OID eventTrapPartsID	1.3.6.1.4.1.116.5.11.4.2.4	OBJECT IDENTIFIER	not-accessible	Error parts code of HM800 where an error occurred.
STR eventTrapDate	1.3.6.1.4.1.116.5.11.4.2.5	DisplayString	not-accessible	Date of HM800 where an error occurred.
STR eventTrapTime	1.3.6.1.4.1.116.5.11.4.2.6	DisplayString	not-accessible	Time of HM800 where an error occurred.
STR eventTrapDescription	1.3.6.1.4.1.116.5.11.4.2.7	DisplayString	not-accessible	Detail information of an error.

RFC description

Storage system management and RAID monitoring for Hitachi Virtual Storage Platform arrays.

Start monitoring Hitachi RAID storage controller (DKC) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HM800MIB

What Is HM800MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description