HM2-PLATFORM-TIMERANGE-MIB

All MIBs › HM2-PLATFORM-TIMERANGE-MIB

Organization: Hirschmann Automation and Control GmbH

Last Updated: 2011-01-26

Category: Technology: Time Synchronization, Vendor: Belden

Description: Hirschmann HiOS (HM2) time range MIB for defining time-based scheduling objects used in ACL and policy rules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HM2-PLATFORM-TIMERANGE-MIB?

HM2-PLATFORM-TIMERANGE-MIB is a Hirschmann private HiOS MIB for defining named time ranges - absolute and, by structure, periodic - that are referenced by ACL and policy rules on Hirschmann managed switches to enforce time-based network policies. It exposes a time-range table with index, name, admin mode, operational state, and row status, plus an absolute sub-table carrying specific start dates and times, so it is largely configuration data. Its monitoring value is in confirming whether a scheduled ACL or policy is currently active (operational state) and that time-range rows are correctly provisioned, rather than physical hardware conditions. It is designed to work alongside the switch's ACL/policy features found elsewhere in Hirschmann's HM2 MIB family. It is deployed on Hirschmann industrial switches implementing scheduled, time-of-day-based access control policies. Engineers can download the HM2-PLATFORM-TIMERANGE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HM2-PLATFORM-TIMERANGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Hirschmann industrial Ethernet switch

Monitoring Examples

hm2AgentTimeRangeTable/Entry rows, keyed by hm2AgentTimeRangeIndex, carry hm2AgentTimeRangeName and hm2AgentTimeRangeOperState; polling the operational state reveals whether a time-based ACL is currently in force or dormant. The related hm2AgentTimeRangeAbsoluteTable/Entry rows, indexed by hm2AgentTimeRangeAbsoluteEntryIndex, hold hm2AgentTimeRangeAbsoluteStartDateAndTime values that an admin cross-checks against the switch clock to confirm a scheduled policy change fires at the intended time, while hm2AgentTimeRangeIndexNextFree indicates the next free index for provisioning a new range.

What Can Be Monitored

time range operational state
time range admin mode
named time range list
absolute start date/time entries
next free time range index

Imported Objects

From HM2-TC-MIB

hm2PlatformMibs

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hm2PlatformTimeRange	1.3.6.1.4.1.248.12.53			The Hirschmann MIB for Time Ranges. Copyright (C) 2011. All Rights Reserved.
hm2AgentTimeRangeGroup	1.3.6.1.4.1.248.12.53.1
I32 hm2AgentTimeRangeIndexNextFree	1.3.6.1.4.1.248.12.53.1.1	Integer32	read-only	This object contains an unused value for the hm2AgentTimeRangeIndex to be used when creating a new Hm2AgentTimeRange. A value of zero indicates the Hm2AgentTimeRange table is full.
hm2AgentTimeRangeTable	1.3.6.1.4.1.248.12.53.1.2		not-accessible	A table of Hm2AgentTimeRange instances.
hm2AgentTimeRangeEntry	1.3.6.1.4.1.248.12.53.1.2.1		not-accessible	hm2AgentTimeRangeIndex and hm2AgentTimeRangeName must be set to complete a new hm2AgentTimeRangeEntry instance
U32 hm2AgentTimeRangeIndex	1.3.6.1.4.1.248.12.53.1.2.1.1	Unsigned32	not-accessible	The Hm2AgentTimeRange table index this instance is associated with.
STR hm2AgentTimeRangeName	1.3.6.1.4.1.248.12.53.1.2.1.2	DisplayString	read-create	The name of this Hm2AgentTimeRange entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this Hm2AgentTimeRange. This object must be set to complete a new Hm2AgentTimeRange row instance.
INT hm2AgentTimeRangeOperState	1.3.6.1.4.1.248.12.53.1.2.1.3	INTEGER	read-only	Operating status of the time-range. It depends on the current time and the periodic and absolute time entries defined in the time-range
ROW hm2AgentTimeRangeStatus	1.3.6.1.4.1.248.12.53.1.2.1.4	RowStatus	read-create	Status of this instance. active(1) - this Hm2AgentTimeRange instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
hm2AgentTimeRangeAbsoluteTable	1.3.6.1.4.1.248.12.53.1.3		not-accessible	A table of absolute entries for time ranges
hm2AgentTimeRangeAbsoluteEntry	1.3.6.1.4.1.248.12.53.1.3.1		not-accessible	A table of absolute entries for time ranges. Atleast one of hm2AgentTimeRangeAbsoluteStartDateAndTime and hm2AgentTimeRangeAbsoluteEndDateAndTime must be set to complete a new Absolute entry instance.
I32 hm2AgentTimeRangeAbsoluteEntryIndex	1.3.6.1.4.1.248.12.53.1.3.1.1	Integer32	not-accessible	The index of this absolute time entry within time range.
HM2 hm2AgentTimeRangeAbsoluteStartDateAndTime	1.3.6.1.4.1.248.12.53.1.3.1.2	Hm2AgentTimeRangeAbsoluteDateAndTime	read-create	The start time for an absolute entry in the time range
HM2 hm2AgentTimeRangeAbsoluteEndDateAndTime	1.3.6.1.4.1.248.12.53.1.3.1.3	Hm2AgentTimeRangeAbsoluteDateAndTime	read-create	The end time for an absolute entry in the time range.
ROW hm2AgentTimeRangeAbsoluteStatus	1.3.6.1.4.1.248.12.53.1.3.1.4	RowStatus	read-create	Status of this instance. active(1) - this hm2AgentTimeRangeAbsoluteEntry is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
hm2AgentTimeRangePeriodicTable	1.3.6.1.4.1.248.12.53.1.4		not-accessible	A table periodic entries for time ranges
hm2AgentTimeRangePeriodicEntry	1.3.6.1.4.1.248.12.53.1.4.1		not-accessible	A table periodic entries for time ranges. All the objects in the periodic entry must be set to complete a new periodic entry instance. Objects hm2AgentTimeRangePeriodicStartDay and hm2AgentTimeRangePeriodicStartTime together forms the start dayandtime and objects hm2AgentTimeRangePeriodicEndDay and hm2AgentTimeRangePeriodicEndTime together forms end dayandtime. The time range to which the periodic entry belongs is active between start dayandtime and end dayandtime. If more than one day is specified in the hm2AgentTimeRangePeriodicStartDay, then the same days should be specified in the hm2AgentTimeRangePeriodicEndDay
I32 hm2AgentTimeRangePeriodicEntryIndex	1.3.6.1.4.1.248.12.53.1.4.1.1	Integer32	not-accessible	The index of this periodic entry within time range.
BIT hm2AgentTimeRangePeriodicStartDay	1.3.6.1.4.1.248.12.53.1.4.1.2	Bits	read-create	The starting day or days on which the configuration that referenced the time range starts going into effect. Same day can be set for both hm2AgentTimeRangePeriodicStartDay and hm2AgentTimeRangePeriodicEndDay objects
HM2 hm2AgentTimeRangePeriodicStartTime	1.3.6.1.4.1.248.12.53.1.4.1.3	Hm2AgentTimeRangePeriodicTime	read-create	The starting time for an periodic entry in the time range.
BIT hm2AgentTimeRangePeriodicEndDay	1.3.6.1.4.1.248.12.53.1.4.1.4	Bits	read-create	The ending day or days on which the configuration that referenced the time range is no longer in efect. Same day can be set for both hm2AgentTimeRangePeriodicStartDay and hm2AgentTimeRangePeriodicEndDay objects
HM2 hm2AgentTimeRangePeriodicEndTime	1.3.6.1.4.1.248.12.53.1.4.1.5	Hm2AgentTimeRangePeriodicTime	read-create	The end time for an periodic entry in the time range.
ROW hm2AgentTimeRangePeriodicStatus	1.3.6.1.4.1.248.12.53.1.4.1.6	RowStatus	read-create	Status of this instance. active(1) - this hm2AgentTimeRangePeriodicEntry is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
INT hm2AgentTimeRangeAdminMode	1.3.6.1.4.1.248.12.53.1.248	INTEGER	read-write	TimeRange admin mode: enable - enable TimeRange disable - disable TimeRange.

RFC description

Time range configuration MIB for Hirschmann industrial networking switches.

Start monitoring Hirschmann HiOS industrial switch (time-range scheduled ACL/policy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HM2-PLATFORM-TIMERANGE-MIB

What Is HM2-PLATFORM-TIMERANGE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description