HM2-PLATFORM-MULTICAST-MIB

All MIBs › HM2-PLATFORM-MULTICAST-MIB

Organization: Hirschmann Automation and Control GmbH

Last Updated: 2013-07-25

Category: Technology: Multicast, Vendor: Belden

Description: Hirschmann HiOS (HM2) platform multicast MIB for IP multicast routing and forwarding configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HM2-PLATFORM-MULTICAST-MIB?

HM2-PLATFORM-MULTICAST-MIB is a Hirschmann Automation and Control proprietary MIB (Platform2/HM2 family) configuring Layer 3 multicast — IGMP and PIM-SM — on Hirschmann industrial switches. It exposes IGMP administrative mode and IGMP-proxy operational status, PIM-SM administrative mode, and a group-to-RP (Rendezvous Point) static-mapping table recording group address, RP address, and mapping origin. As a configuration/protocol-status MIB it lets an administrator confirm PIM-SM and IGMP are enabled as expected and verify a specific multicast group's RP mapping. It is deployed on Hirschmann industrial switches routing Layer 3 multicast traffic. Engineers can download the HM2-PLATFORM-MULTICAST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HM2-PLATFORM-MULTICAST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Hirschmann industrial Ethernet switches (Platform2/HM2, Layer 3 multicast)

Monitoring Examples

An administrator checks hm2AgentMulticastPIMSMGroupMappingTable for a specific multicast group to confirm it's mapped to the correct Rendezvous Point before troubleshooting a PIM-SM join failure.

What Can Be Monitored

IGMP/PIM-SM admin mode
multicast group-to-RP mapping

Imported Objects

From HM2-TC-MIB

HmEnabledStatus
hm2PlatformMibs	OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From MGMD-STD-MIB

mgmdHostCacheAddress	OBJECT-TYPE
mgmdHostCacheAddressType	OBJECT-TYPE
mgmdHostCacheIfIndex	OBJECT-TYPE
mgmdHostInterfaceIfIndex	OBJECT-TYPE
mgmdHostInterfaceQuerierType	OBJECT-TYPE

From PIM-BSR-MIB

pimBsrCandidateBSREntry

OBJECT-TYPE

From PIM-STD-MIB

PimGroupMappingOriginType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

RowStatus

How to Use in IPNetwork Monitor

Example using hm2AgentMulticastMgmdNumberOfGroups OID:

Select a Hirschmann HiOS Platform2 industrial switch (Layer 3 IGMP/PIM-SM multicast) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hm2AgentMulticastMgmdNumberOfGroups into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of groups corresponding to the proxy interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate the underlying set of items changed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hm2PlatformMulticast	1.3.6.1.4.1.248.12.4			The Hirschmann Private Platform2 MIB for Layer3 Multicast. Copyright (C) 2013. All Rights Reserved.
hm2AgentMulticastIGMPConfigGroup	1.3.6.1.4.1.248.12.4.1
HME hm2AgentMulticastIGMPAdminMode	1.3.6.1.4.1.248.12.4.1.1	HmEnabledStatus	read-write	This enables or disables IGMP on the system.
HME hm2AgentMulticastIGMPProxyOperStatus	1.3.6.1.4.1.248.12.4.1.249	HmEnabledStatus	read-only	The operating status of IGMP proxy on this device.
hm2AgentMulticastPIMSMConfigGroup	1.3.6.1.4.1.248.12.4.3
HME hm2AgentMulticastPIMSMAdminMode	1.3.6.1.4.1.248.12.4.3.1	HmEnabledStatus	read-write	This enables or disables PIM Sparse Mode on the system.
hm2AgentPIMBsrCandidateConfTable	1.3.6.1.4.1.248.12.4.3.4		not-accessible	Provides Candidate-BSR-Advertisements interval information.
hm2AgentPIMBsrCandidateConfEntry	1.3.6.1.4.1.248.12.4.3.4.1		not-accessible	Information about a table entry.
U32 pimBsrCandidateBSRAdvInterval	1.3.6.1.4.1.248.12.4.3.4.1.1	Unsigned32	read-write	A Candidate BSR generates Candidate-BSR-Advertisements periodically. This object represents the time interval in seconds between two consecutive advertisements.
hm2AgentMulticastPIMSMGroupMappingTable	1.3.6.1.4.1.248.12.4.3.249		not-accessible	The (conceptual) table listing BSR-specific information about PIM group mappings learned via C-RP advertisements or created locally using configurations.
hm2AgentMulticastPIMSMGroupMappingEntry	1.3.6.1.4.1.248.12.4.3.249.1		not-accessible	An entry (conceptual row) in the hm2AgentMulticastPIMSMGroupMappingTable.
IPt hm2AgentMulticastPIMSMGroupMappingGrpAddrType	1.3.6.1.4.1.248.12.4.3.249.1.1	InetAddressType	not-accessible	The Inet address type of the IP multicast group prefix.
IP hm2AgentMulticastPIMSMGroupMappingGrpAddr	1.3.6.1.4.1.248.12.4.3.249.1.2	InetAddress	not-accessible	The IP multicast group address that, when combined with hm2AgentMulticastPIMSMGroupMappingGrpPrefixLen, gives the group prefix for this mapping. The InetAddressType is given by the hm2AgentMulticastPIMSMGroupMappingGrpAddrType object.
IPt hm2AgentMulticastPIMSMGroupMappingRPAddrType	1.3.6.1.4.1.248.12.4.3.249.1.3	InetAddressType	read-only	The Inet address type of the RP address.
IP hm2AgentMulticastPIMSMGroupMappingRPAddr	1.3.6.1.4.1.248.12.4.3.249.1.4	InetAddress	read-only	The IP address of the RP to be used for the given group. The InetAddressType is given by the hm2AgentMulticastPIMSMGroupMappingRPAddrType object.
NUM hm2AgentMulticastPIMSMGroupMappingOrigin	1.3.6.1.4.1.248.12.4.3.249.1.5	PimGroupMappingOriginType	read-only	The mechanism by which the RP for the group was learned.
ADR hm2AgentMulticastPIMSMGroupMappingGrpPrefixLen	1.3.6.1.4.1.248.12.4.3.249.1.6	InetAddressPrefixLength	read-only	The multicast group prefix length that, when combined with hm2AgentMulticastPIMSMGroupMappingGrpAddr, gives the group prefix for this mapping. If hm2AgentMulticastPIMSMGroupMappingGrpAddrType is 'ipv4' or 'ipv4z', this object must be in the range 4..32. If hm2AgentMulticastPIMSMGroupMappingGrpAddrType is 'ipv6' or 'ipv6z', this object must be in the range 8..128.
TIK hm2AgentMulticastPIMSMGroupMappingExpiryTime	1.3.6.1.4.1.248.12.4.3.249.1.7	TimeTicks	read-only	The minimum time remaining before this entry will be aged out. The value zero indicates that this entry will never be aged out.
hm2AgentMulticastPIMDMConfigGroup	1.3.6.1.4.1.248.12.4.4
HME hm2AgentMulticastPIMDMAdminMode	1.3.6.1.4.1.248.12.4.4.1	HmEnabledStatus	read-write	This enables or disables PIM Dense Mode on the system.
U32 hm2AgentMulticastPIMDMPruneAssertHoldtime	1.3.6.1.4.1.248.12.4.4.248	Unsigned32	read-write	The value inserted into the Holdtime field of a PIM-DM Prune message sent on any interface.
hm2AgentMulticastRoutingConfigGroup	1.3.6.1.4.1.248.12.4.5
HME hm2AgentMulticastRoutingAdminMode	1.3.6.1.4.1.248.12.4.5.1	HmEnabledStatus	read-write	This enables or disables Multicast Routing Mode on the system.
U32 hm2AgentMulticastSoftwareDSCP	1.3.6.1.4.1.248.12.4.5.248	Unsigned32	read-write	Configures the DSCP value that is written into multicast packets that are routed in software. If set to 64, the DSCP value of incoming packets is not changed.
hm2AgentMulticastDVMRPConfigGroup	1.3.6.1.4.1.248.12.4.6
HME hm2AgentMulticastDVMRPAdminMode	1.3.6.1.4.1.248.12.4.6.1	HmEnabledStatus	read-write	This enables or disables DVMRP on the system.
U32 hm2AgentMulticastDVMRPRouteExpiryTime	1.3.6.1.4.1.248.12.4.6.248	Unsigned32	read-write	TBD.
hm2AgentSnmpTrapFlagsConfigGroupMulticast	1.3.6.1.4.1.248.12.4.7
HME hm2AgentSnmpDVMRPTrapFlag	1.3.6.1.4.1.248.12.4.7.1	HmEnabledStatus	read-write	This enables or disables DVMRP Traps on the system.
HME hm2AgentSnmpPIMTrapFlag	1.3.6.1.4.1.248.12.4.7.2	HmEnabledStatus	read-write	This enables or disables PIM Traps on the system.
hm2AgentIpStaticMRouteTable	1.3.6.1.4.1.248.12.4.8		not-accessible	The table listing the Static Multicast Route Entries.
hm2AgentIpStaticMRouteEntry	1.3.6.1.4.1.248.12.4.8.1		not-accessible	Information about a table entry.
IPt hm2AgentIpStaticMRouteSrcAddressType	1.3.6.1.4.1.248.12.4.8.1.1	InetAddressType	not-accessible	The address type of this Multicast data source.
IP hm2AgentIpStaticMRouteSrcIpAddr	1.3.6.1.4.1.248.12.4.8.1.2	InetAddress	not-accessible	The address of the Multicast data source.
I32 hm2AgentIpStaticMRouteSrcNetMask	1.3.6.1.4.1.248.12.4.8.1.3	Integer32	not-accessible	The network mask for the IP address of the Multicast data source.
IP hm2AgentIpStaticMRouteRpfIpAddr	1.3.6.1.4.1.248.12.4.8.1.4	InetAddress	read-create	The RPF Address. This object has been deprecated, because it has no address type. It is replaced by hm2AgentIpStaticMRouteExtRpfIpAddr.
NUM hm2AgentIpStaticMRouteIfIndex	1.3.6.1.4.1.248.12.4.8.1.5	InterfaceIndex	read-create	The interface index is valid only for IPv6 and only if RPF address is link-local.
I32 hm2AgentIpStaticMRoutePreference	1.3.6.1.4.1.248.12.4.8.1.6	Integer32	read-create	The preference of this route entry.
ROW hm2AgentIpStaticMRouteStatus	1.3.6.1.4.1.248.12.4.8.1.7	RowStatus	read-create	The status of this row. The status object cannot be set to active(1) before a valid value has been written to hm2AgentIpStaticMRouteExtRpfIpAddr. All writeable objects in this entry can be modified when the status of this entry is active(1).
IPt hm2AgentIpStaticMRouteExtRpfIpAddrType	1.3.6.1.4.1.248.12.4.8.1.248	InetAddressType	read-create	The address type of the RPF Address.
IP hm2AgentIpStaticMRouteExtRpfIpAddr	1.3.6.1.4.1.248.12.4.8.1.249	InetAddress	read-create	The RPF Address.
hm2AgentMulticastMgmdExtConfigGroup	1.3.6.1.4.1.248.12.4.250
hm2AgentMulticastMgmdExtTable	1.3.6.1.4.1.248.12.4.250.10		not-accessible	The (conceptual) table listing the upstream interface of the router. This is also known as proxy interface.
hm2AgentMulticastMgmdExtEntry	1.3.6.1.4.1.248.12.4.250.10.1		not-accessible	An entry (conceptual row) representing the upstream interface of the router.
U32 hm2AgentMulticastMgmdUnsolicitRprtInterval	1.3.6.1.4.1.248.12.4.250.10.1.1	Unsigned32	read-write	Specify how often the system should send unsolicited reports to routers on the upstream interface.
I32 hm2AgentMulticastMgmdNumberOfGroupsEx	1.3.6.1.4.1.248.12.4.250.10.1.2	Integer32	read-only	Number of groups corresponding to the proxy interface.
hm2AgentMulticastMgmdHostCacheExtGroup	1.3.6.1.4.1.248.12.4.251
hm2AgentMulticastMgmdHostCacheExtTable	1.3.6.1.4.1.248.12.4.251.10		not-accessible	The (conceptual) table listing group addresses of the upstream interface of the router.
hm2AgentMulticastMgmdHostCacheExtEntry	1.3.6.1.4.1.248.12.4.251.10.1		not-accessible	An entry (conceptual row) representing a group of upstream interface of the router.
INT hm2AgentMulticastMgmdHostStatus	1.3.6.1.4.1.248.12.4.251.10.1.1	INTEGER	read-only	A variable that describes the state of the host in relation with an IP multicast group.
hm2AgentMulticastSNMPExtensionGroup	1.3.6.1.4.1.248.12.4.260
hm2AgentMulticastProtocolEnableErrorReturn	1.3.6.1.4.1.248.12.4.260.1			Cannot enable protocol x because protocol y is enabled.
hm2AgentMulticastNullGroupErrorReturn	1.3.6.1.4.1.248.12.4.260.2			The group address or the group address mask is zero.
hm2AgentMulticastBoundaryRangeEntriesErrorReturn	1.3.6.1.4.1.248.12.4.260.3			The group address is out of administratively scoped addresses range(239.x.x.x).
hm2AgentMulticastHostEntriesErrorReturn	1.3.6.1.4.1.248.12.4.260.4			The group address has host bits set.
hm2AgentMgmdHostInvalidEntryErrorReturn	1.3.6.1.4.1.248.12.4.260.5			The entry cannot be deleted because is not valid.
hm2AgentMulticastProtocolDeInitErrorReturn	1.3.6.1.4.1.248.12.4.260.6			The multicast routing protocol is deinitializing. Please retry later.
hm2AgentMulticastLocalAddressErrorReturn	1.3.6.1.4.1.248.12.4.260.7			The IP address is not local.
hm2AgentMulticastCandRPErrorReturn	1.3.6.1.4.1.248.12.4.260.8			Candidate RP is already configured on another interface.
hm2AgentMulticastUnicastValidationErrorReturn	1.3.6.1.4.1.248.12.4.260.9			The IP address is out of unicast range.
hm2AgentMulticastGroupValidationErrorReturn	1.3.6.1.4.1.248.12.4.260.10			The group address is out of multicast range.
hm2AgentMulticastSSMValidationErrorReturn	1.3.6.1.4.1.248.12.4.260.11			The group address is in SSM range.
hm2AgentMulticastStaticSourceErrorReturn	1.3.6.1.4.1.248.12.4.260.12			Source address is a directly connected address.
hm2AgentMulticastStaticRPFErrorReturn	1.3.6.1.4.1.248.12.4.260.13			The RPF address is a local address.
hm2AgentMulticastStaticHostErrorReturn	1.3.6.1.4.1.248.12.4.260.14			The source IP address has the host bit set.
hm2AgentMulticastCandRPPrimaryErrorReturn	1.3.6.1.4.1.248.12.4.260.15			The candidate RP address must be a primary IP address.
hm2AgentMulticastCandBSRPrimaryErrorReturn	1.3.6.1.4.1.248.12.4.260.16			The candidate BSR address must be a primary IP address.

RFC description

Manages Layer 3 multicast configurations including IGMP and PIM sparse mode for Hirschmann Platform switches.

Start monitoring Hirschmann HiOS Platform2 industrial switch (Layer 3 IGMP/PIM-SM multicast) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HM2-PLATFORM-MULTICAST-MIB