HM2-FILEMGMT-MIB

All MIBs › HM2-FILEMGMT-MIB

Organization: Hirschmann Automation and Control GmbH

Last Updated: 2011-03-16

Category: Device Management, Vendor: Belden

Description: Hirschmann HiOS (HM2) file management MIB for firmware upgrades, configuration file transfers, and storage management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HM2-FILEMGMT-MIB?

HM2-FILEMGMT-MIB is a Hirschmann Automation and Control GmbH proprietary MIB (HiOS/HM2 platform) managing configuration/firmware file operations — upload, download, backup, activation. Its action table, keyed by index, records action type/item type, source/destination type and data, an activate trigger, activation/action result and result text, percent-ready, an activation key, container password, a parameter, and source interface, while a profile table (storage type, index, name, date/time) tracks saved configuration profiles. As a configuration/status MIB it lets an administrator trigger a configuration backup/restore and watch its completion percentage on a Hirschmann HM2-based device. It is deployed on Hirschmann Automation and Control (HM2/HiOS) industrial networking equipment. Engineers can download the HM2-FILEMGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HM2-FILEMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Hirschmann Automation and Control (HM2/HiOS) industrial networking equipment

Monitoring Examples

An administrator monitors hm2FMActionPercentReady after triggering hm2FMActionActivate to track a configuration restore's progress on a Hirschmann HM2-based device.

What Can Be Monitored

configuration/firmware file operation progress and results

Imported Objects

From HM2-TC-MIB

HmEnabledStatus
HmTimeSeconds1970
hm2ConfigurationMibs	OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hm2FileMgmtMib	1.3.6.1.4.1.248.11.21			Hirschmann File Management MIB. Copyright (C) 2011. All Rights Reserved.
hm2FileMgmtNotifications	1.3.6.1.4.1.248.11.21.0
NTF hm2ConfigurationSavedTrap	1.3.6.1.4.1.248.11.21.0.1			This trap is sent after the configuration of the agent was successfully saved.
NTF hm2ConfigurationChangedTrap	1.3.6.1.4.1.248.11.21.0.2			This trap is sent if there is a change in the synchronization status between currently running and the saved configuration so that the value of hm2FMNvmState changes.
hm2FileMgmtMibObjects	1.3.6.1.4.1.248.11.21.1
hm2FileMgmtProfileGroup	1.3.6.1.4.1.248.11.21.1.1
hm2FMProfileTable	1.3.6.1.4.1.248.11.21.1.1.1		not-accessible	A list of profiles stored in NV memory.
hm2FMProfileEntry	1.3.6.1.4.1.248.11.21.1.1.1.1		not-accessible	A profile entry.
INT hm2FMProfileStorageType	1.3.6.1.4.1.248.11.21.1.1.1.1.1	INTEGER	read-only	Type of storage of the profile entry.
I32 hm2FMProfileIndex	1.3.6.1.4.1.248.11.21.1.1.1.1.2	Integer32	read-only	Index of the profile entry.
STR hm2FMProfileName	1.3.6.1.4.1.248.11.21.1.1.1.1.3	DisplayString	read-only	Name of the entry consisting of alphanumeric characters plus hyphen and underscore.
HMT hm2FMProfileDateTime	1.3.6.1.4.1.248.11.21.1.1.1.1.4	HmTimeSeconds1970	read-only	Time and date of last write access using the content of the variable hm2SystemTime.
INT hm2FMProfileActive	1.3.6.1.4.1.248.11.21.1.1.1.1.5	INTEGER	read-write	Setting the variable to active(1) enables the profile so that it will be used the next time the configuration is reloaded. Setting the value to inactive(2) is not allowed since there must be always at least one profile with the state set to active(1).
INT hm2FMProfileAction	1.3.6.1.4.1.248.11.21.1.1.1.1.6	INTEGER	read-write	Action to be performed on the profile entry. Setting the value to delete(2) erases the profile. It is not possible to delete the currently active profile.
OID hm2FMProfileDeviceType	1.3.6.1.4.1.248.11.21.1.1.1.1.7	OBJECT IDENTIFIER	read-only	Manufacturer-defined product identifier (product family + product ID). Example: Object-ID 1.3.6.1.4.1.248.11.2.1.1 is the hm2ProductFamily EES and Object-ID 1.3.6.1.4.1.248.11.2.1.1.2 is the Product ID for ees25-0600
T/F hm2FMProfileEncryptionActive	1.3.6.1.4.1.248.11.21.1.1.1.1.8	TruthValue	read-only	The profile is encrypted if this variable is set to active(true). It is not encrypted in case of inactive(false).
T/F hm2FMProfileEncryptionVerified	1.3.6.1.4.1.248.11.21.1.1.1.1.9	TruthValue	read-only	This variable indicates true if an encrypted profile can be successfully decrypted by the device. In case of an encryption password mismatch, the verification fails the value is false. If the corresponding profile is not encrypted, this variable is set to true.
I32 hm2FMProfileSwMajorRelNum	1.3.6.1.4.1.248.11.21.1.1.1.1.10	Integer32	read-only	Shows the major release number of the firmware, the profile was created on.
I32 hm2FMProfileSwMinorRelNum	1.3.6.1.4.1.248.11.21.1.1.1.1.11	Integer32	read-only	Shows the minor release number of the firmware, the profile was created on.
I32 hm2FMProfileSwBugfixRelNum	1.3.6.1.4.1.248.11.21.1.1.1.1.12	Integer32	read-only	Shows the bugfix release number of the firmware, the profile was created on.
STR hm2FMProfileFingerprint	1.3.6.1.4.1.248.11.21.1.1.1.1.13	DisplayString	read-only	HEX String representation of profile content fingerprint. Consists of characters (0..9A..F) to represent a hexadecimal number. It will contain the string invalid, if the corresponding file does not contain a correct formatted SHA1 hash as fingerprint.
T/F hm2FMProfileFingerprintVerified	1.3.6.1.4.1.248.11.21.1.1.1.1.14	TruthValue	read-only	This variable indicates true if the configuration profiles fingerprint matches the profile's configuration data. In case of a fingerprint, the variable is set to false.
hm2FileMgmtActionGroup	1.3.6.1.4.1.248.11.21.1.2
hm2FMActionTable	1.3.6.1.4.1.248.11.21.1.2.1		not-accessible	A list of profiles stored in NV memory.
hm2FMActionEntry	1.3.6.1.4.1.248.11.21.1.2.1.1		not-accessible	A profile entry.
INT hm2FMActionType	1.3.6.1.4.1.248.11.21.1.2.1.1.1	INTEGER	not-accessible	Type of the action to be performed.
INT hm2FMActionItemType	1.3.6.1.4.1.248.11.21.1.2.1.1.2	INTEGER	not-accessible	Type of the item to be processed.
INT hm2FMActionSourceType	1.3.6.1.4.1.248.11.21.1.2.1.1.3	INTEGER	not-accessible	Type of the source object to be processed.
INT hm2FMActionDestinationType	1.3.6.1.4.1.248.11.21.1.2.1.1.4	INTEGER	not-accessible	Type of the destination object to be processed.
I32 hm2FMActionActivate	1.3.6.1.4.1.248.11.21.1.2.1.1.5	Integer32	read-write	In case of a set operation: If the value to be written matches with the result of hm2FMActionActivateKey, the action is started. In case of a read operation, it will always reflect the key of the last successful operation.
STR hm2FMActionSourceData	1.3.6.1.4.1.248.11.21.1.2.10	DisplayString	read-write	Additional data for the source object. This could, for example, be a profile name or URL
STR hm2FMActionDestinationData	1.3.6.1.4.1.248.11.21.1.2.11	DisplayString	read-write	Additional data for the source object. This could be for example a profile name or URL
INT hm2FMActionActivateResult	1.3.6.1.4.1.248.11.21.1.2.12	INTEGER	read-only	Either returns ok(1) if the action is successfully started, param-error(2) if there is some problem with the given parameters or busy(3) if there is still an action in progress.
STR hm2FMActionActivateResultText	1.3.6.1.4.1.248.11.21.1.2.13	DisplayString	read-only	Text describing why the start of the operation has failed.
INT hm2FMActionStatus	1.3.6.1.4.1.248.11.21.1.2.14	INTEGER	read-only	Returns the running status of the action.
I32 hm2FMActionPercentReady	1.3.6.1.4.1.248.11.21.1.2.15	Integer32	read-only	Estimation of how many percent of the operation is done.
INT hm2FMActionResult	1.3.6.1.4.1.248.11.21.1.2.16	INTEGER	read-only	Error status of the last action which has been performed.
STR hm2FMActionResultText	1.3.6.1.4.1.248.11.21.1.2.17	DisplayString	read-only	Either OK or a descriptive text giving a reason why the last operation failed
I32 hm2FMActionActivateKey	1.3.6.1.4.1.248.11.21.1.2.18	Integer32	read-only	An advisory lock used to ensure that different management entities can not interfere with each others actions. The value read from this variable must be used to start the action by applying to the object hm2FMActionActivate.
STR hm2FMActionContainerPassword	1.3.6.1.4.1.248.11.21.1.2.19	DisplayString	read-write	.
INT hm2FMActionParameter	1.3.6.1.4.1.248.11.21.1.2.20	INTEGER	read-write	This variable defines what acion to be done based on the value. By default it has value as none.
NUM hm2FMActionSourceInterface	1.3.6.1.4.1.248.11.21.1.2.21	InterfaceIndexOrZero	read-write	This variable defines the interface from which the source IP address will be taken for the file transfer session. The frames will not necessarily be sent on this interface, only the IP address of the interface will be used as source. By default it has value 0.
hm2FileMgmtStatusGroup	1.3.6.1.4.1.248.11.21.1.3
INT hm2FMNvmState	1.3.6.1.4.1.248.11.21.1.3.1	INTEGER	read-only	This variable returns ok(1) if the contents of the currently used configuration is the same as that stored in NV memory or outOfsync(2) if there are any differences. The variable returns busy(3) if the process to determine a possible state change is currently running.
INT hm2FMEnvmState	1.3.6.1.4.1.248.11.21.1.3.2	INTEGER	read-only	This variable returns ok(1) if the contents of the currently used configuration on the active external non-volatile memory is the same than that stored in NV memory, outOfsync(2) if there are any differences. If the value is absent(3), then the external memory device is not connected.
INT hm2FMBootParamState	1.3.6.1.4.1.248.11.21.1.3.3	INTEGER	read-only	Returns outOfSync(2) if the boot parameters that were applied during startup are not in sync with the currently stored boot parameters, otherwise ok(1).
hm2FileMgmtConfigGroup	1.3.6.1.4.1.248.11.21.1.4
hm2FileMgmtConfigWatchdogControl	1.3.6.1.4.1.248.11.21.1.4.1
HME hm2ConfigWatchdogAdminStatus	1.3.6.1.4.1.248.11.21.1.4.1.1	HmEnabledStatus	read-write	Administrative status of the configuration watchdog. enable(1): start/trigger the watchdog timer disable(2): turn off the watchdog This feature provides recovery from situations where the device cannot be reached by the management station anymore. Whenever this variable is set to enable(1), the value of hm2ConfigWatchdogTimeInterval is loaded into the watchdog timer. This timer must be triggered before hm2ConfigWatchdogTimerValue reaches 0. If the watchdog timer expires, the last saved configuration of the device will be reapplied. The watchdog is triggered by MIB read and write accesses.
HME hm2ConfigWatchdogOperStatus	1.3.6.1.4.1.248.11.21.1.4.1.2	HmEnabledStatus	read-only	Operational status of the configuration watchdog. enable(1): watchdog up and running disable(2): watchdog inactive
I32 hm2ConfigWatchdogTimeInterval	1.3.6.1.4.1.248.11.21.1.4.1.3	Integer32	read-write	Period of the watchdog timer in seconds.
I32 hm2ConfigWatchdogTimerValue	1.3.6.1.4.1.248.11.21.1.4.1.4	Integer32	read-only	Current countdown value of the watchdog timer in seconds.
IPt hm2ConfigWatchdogIPAddressType	1.3.6.1.4.1.248.11.21.1.4.1.5	InetAddressType	read-only	IP address type of station that triggers the watchdog.
IP hm2ConfigWatchdogIPAddress	1.3.6.1.4.1.248.11.21.1.4.1.6	InetAddress	read-only	IP address of station that currently triggers the watchdog.
hm2FileMgmtServerAccessGroup	1.3.6.1.4.1.248.11.21.1.4.2
STR hm2FMServerUserName	1.3.6.1.4.1.248.11.21.1.4.2.1	DisplayString	read-write	Login name for the used file transport protocol.
STR hm2FMServerPassword	1.3.6.1.4.1.248.11.21.1.4.2.2	DisplayString	read-write	Password for the used file transport protocol.
hm2FileMgmtSecurityGroup	1.3.6.1.4.1.248.11.21.1.4.4
T/F hm2FileMgmtConfigPasswordStatus	1.3.6.1.4.1.248.11.21.1.4.4.1	TruthValue	read-only	Returns 'true' if a configuration password is set, otherwise 'false'.
STR hm2FileMgmtConfigPasswordChange	1.3.6.1.4.1.248.11.21.1.4.4.2	DisplayString	read-write	Password to encrypt confidential information in the configuration file. Format: '[old password]\|[new password]' set password: '\|[new password]' change password: '[old password]\|[new password]' remove password: '[old password]\|' Valid password characters are any DisplayString characters except '\|'. When this object is read, the zero-length (empty) string is returned. Setting the zero-length string has no effect.
NUM hm2FileMgmtGlobalSourceInterface	1.3.6.1.4.1.248.11.21.1.4.9	InterfaceIndexOrZero	read-write	This variable defines the global source-interface used by file-transfers in case hm2FMActionSourceInterface is not configured by the user. The frames will not necessarily be sent on this interface, only the IP address of the interface will be used as source. By default it has value 0.
INT hm2FileMgmtConfigCompatibilityMode	1.3.6.1.4.1.248.11.21.1.4.10	INTEGER	read-write	Set 'hiosV1V2' only if a configuration file needs to be migrated to a device running HiOS 01.x.xx / 02.x.xx software. Otherwise for normal operation it is recommended to set the compatibility mode to the default 'disable'.
hm2FileMgmtSNMPExtensionGroup	1.3.6.1.4.1.248.11.21.3
hm2FileMgmtSESCfgActivateSuccessSetFailuresReturn	1.3.6.1.4.1.248.11.21.3.1			Indicates a configuration profile was activated succesfully, but several config items failed to initialize.
hm2FileMgmtSESCfgActivateErrorReturn	1.3.6.1.4.1.248.11.21.3.2			Indicates a configuration profile could not be activated.
hm2FileMgmtSESCfgActivateIncomlpeteReturn	1.3.6.1.4.1.248.11.21.3.3			Indicates an incomlete activation of a configuration profile.
hm2FileMgmtSESCfgMgrCopyCommandErrorReturn	1.3.6.1.4.1.248.11.21.3.4			Indicates a failure of a COPY command given to the Config-Manager's command engine.
hm2FileMgmtSESCfgMgrClearCommandErrorReturn	1.3.6.1.4.1.248.11.21.3.5			Indicates a failure of a CLEAR command given to the Config-Manager's command engine.
hm2FileMgmtSESCfgMgrSwapCommandErrorReturn	1.3.6.1.4.1.248.11.21.3.6			Indicates a failure of a SWAP command given to the Config-Manager's command engine.
hm2FileMgmtSESCfgErrorReturn	1.3.6.1.4.1.248.11.21.3.7			Indicates a CFG test error.
hm2FileMgmtSESCfgMgrCommandActivateErrorReturn	1.3.6.1.4.1.248.11.21.3.8			Indicates a failure because other Config-Manager command is running.

RFC description

Hirschmann file management MIB supporting file operations and configuration management for industrial switches.

Start monitoring Hirschmann HiOS industrial switch (config/firmware file management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HM2-FILEMGMT-MIB

What Is HM2-FILEMGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description