All MIBs › HH3C-WLAN-FLEXAPP-CFG-MIB
Organization: New H3C Technologies Co., Ltd.
Last Updated: 2015-05-26
Category: Domain: Wireless, Technology: Wireless, Vendor: H3C/HH3C, Wireless and WLAN
Description: HH3C MIB for WLAN flexible application configuration managing advanced WLAN service policies on H3C ACs.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HH3C-WLAN-FLEXAPP-CFG-MIB?
HH3C-WLAN-FLEXAPP-CFG-MIB is a New H3C Technologies Co., Ltd. proprietary MIB configuring pluggable WLAN application modules (FlexApp) and IoT radio modules on H3C wireless access points. Its module-config table, keyed by AP serial ID/module ID, records module type/status, reset/reset-to-factory actions, firmware-update status, TX power, and a manual-update trigger, while an IoT-specific table records module model/hardware/software version and serial ID, and an IoT-configuration table records the associated management engine address/port. As a configuration/status MIB it lets an administrator confirm a pluggable WLAN/IoT module's firmware status and TX power on an H3C access point. It is deployed on New H3C Technologies wireless access points with pluggable FlexApp/IoT modules. Engineers can download the HH3C-WLAN-FLEXAPP-CFG-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-WLAN-FLEXAPP-CFG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- New H3C Technologies wireless access points (pluggable FlexApp/IoT modules)
Monitoring Examples
An administrator checks hh3cWlanModuleUpWareStatus and hh3cWlanModuleTxPower to confirm a pluggable WLAN module's firmware update completed and its transmit power is correct on an H3C access point.
What Can Be Monitored
- pluggable module firmware status and transmit power
This MIB depends on
Related MIBs
Imported Objects
From HH3C-DOT11-REF-MIB
| hh3cDot11 | MODULE-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| MacAddress | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| OCT hh3cDot11IOTAPSerialID | 1.3.6.1.4.1.25506.2.75.19.1.2.1.1 | OCTET STRING | not-accessible | This object represents the serial ID of an AP. |
| OCT hh3cDot11IOTModuleHwVersion | 1.3.6.1.4.1.25506.2.75.19.1.2.1.5 | OCTET STRING | read-only | This object represents the hardware version of a module. |
| I32 hh3cDot11IOTModuleID | 1.3.6.1.4.1.25506.2.75.19.1.2.1.2 | Integer32 | not-accessible | This object represents a module. |
| OCT hh3cDot11IOTModuleModel | 1.3.6.1.4.1.25506.2.75.19.1.2.1.4 | OCTET STRING | read-only | This object represents the model of a module. |
| OCT hh3cDot11IOTModuleSerialId | 1.3.6.1.4.1.25506.2.75.19.1.2.1.7 | OCTET STRING | read-only | This object represents the sequence ID of a module. |
| OCT hh3cDot11IOTModuleSwVersion | 1.3.6.1.4.1.25506.2.75.19.1.2.1.6 | OCTET STRING | read-only | This object represents the software version of a module. |
| INT hh3cDot11IOTModuleType | 1.3.6.1.4.1.25506.2.75.19.1.2.1.3 | INTEGER | read-only | This object represents the type of a module. |
| I32 hh3cWlanAEAPRadioID | 1.3.6.1.4.1.25506.2.75.19.5.2.1.2 | Integer32 | not-accessible | This object represents the ID of a radio. |
| OCT hh3cWlanAEAPSerialID | 1.3.6.1.4.1.25506.2.75.19.5.1.1.1 | OCTET STRING | not-accessible | This object represents the serial ID of an AP. |
| hh3cWlanAEConfigEntry | 1.3.6.1.4.1.25506.2.75.19.5.1.1 | not-accessible | Each entry contains AE location configuration information. | |
| hh3cWlanAEConfigGroup | 1.3.6.1.4.1.25506.2.75.19.5 | |||
| hh3cWlanAEConfigTable | 1.3.6.1.4.1.25506.2.75.19.5.1 | not-accessible | Administrators must configure AeroScout (AE) parameters. | |
| IP hh3cWlanAEEngineAddr | 1.3.6.1.4.1.25506.2.75.19.5.1.1.3 | IpAddress | read-write | This object represents the server's IPv4 address to which AE messages are sent. |
| INT hh3cWlanAEEngineDetection | 1.3.6.1.4.1.25506.2.75.19.5.1.1.9 | INTEGER | read-write | This object represents the location mode. |
| I32 hh3cWlanAEEnginePort | 1.3.6.1.4.1.25506.2.75.19.5.1.1.4 | Integer32 | read-write | This object represents the UDP port of the location server. |
| T/F hh3cWlanAEMUStatus | 1.3.6.1.4.1.25506.2.75.19.5.2.1.4 | TruthValue | read-write | This object represents the status of MU message reporting. |
| OCT hh3cWlanAERadioAPSerialID | 1.3.6.1.4.1.25506.2.75.19.5.2.1.1 | OCTET STRING | not-accessible | This object represents the serial ID of an AP. |
| hh3cWlanAERadioConfigEntry | 1.3.6.1.4.1.25506.2.75.19.5.2.1 | not-accessible | Each entry contains AE location configuration information. | |
| hh3cWlanAERadioConfigTable | 1.3.6.1.4.1.25506.2.75.19.5.2 | not-accessible | Administrators must configure AE parameters. | |
| T/F hh3cWlanAERadioStatus | 1.3.6.1.4.1.25506.2.75.19.5.2.1.3 | TruthValue | read-write | This object represents the enabled or disabled status of radio-based location. |
| INT hh3cWlanAEReportMode | 1.3.6.1.4.1.25506.2.75.19.5.1.1.10 | INTEGER | read-write | This object represents the report mode. |
| T/F hh3cWlanAEStatus | 1.3.6.1.4.1.25506.2.75.19.5.1.1.2 | TruthValue | read-write | This object represents the enabled or disabled status of AE location. |
| MAC hh3cWlanAETagMultiAddr | 1.3.6.1.4.1.25506.2.75.19.5.1.1.8 | MacAddress | read-write | This object represents Tag's multicast MAC address. |
| T/F hh3cWlanAETagStatus | 1.3.6.1.4.1.25506.2.75.19.5.2.1.5 | TruthValue | read-write | This object represents the status of Tag message reporting. |
| INT hh3cWlanAETimeStamp | 1.3.6.1.4.1.25506.2.75.19.5.1.1.6 | INTEGER | read-write | This object represents the enabled or disabled status of timestamp. |
| I32 hh3cWlanAEVendorPort | 1.3.6.1.4.1.25506.2.75.19.5.1.1.5 | Integer32 | read-write | This object represents the UDP port to listen for AE messages from the server. |
| INT hh3cWlanAEVersion | 1.3.6.1.4.1.25506.2.75.19.5.1.1.7 | INTEGER | read-write | This object represents the version of the AE protocol. |
| OCT hh3cWlanAPSerialID | 1.3.6.1.4.1.25506.2.75.19.1.1.1.1 | OCTET STRING | not-accessible | This object represents the serial ID of an AP. |
| I32 hh3cWlanBLEAdvMajorID | 1.3.6.1.4.1.25506.2.75.19.4.2.1.6 | Integer32 | read-write | This object represents the major ID of BLE advertisement packets. |
| I32 hh3cWlanBLEAdvMinorID | 1.3.6.1.4.1.25506.2.75.19.4.2.1.7 | Integer32 | read-write | This object represents the minor ID of BLE advertisement packets. |
| I32 hh3cWlanBLEAdvReportInterval | 1.3.6.1.4.1.25506.2.75.19.4.2.1.4 | Integer32 | read-write | This object represents the interval at which a BLE module sends advertisement packets. |
| T/F hh3cWlanBLEAdvReportStatus | 1.3.6.1.4.1.25506.2.75.19.4.2.1.3 | TruthValue | read-write | This object represents the enabled or disabled status of BLE advertisement reporting. |
| OCT hh3cWlanBLEAdvUUID | 1.3.6.1.4.1.25506.2.75.19.4.2.1.5 | OCTET STRING | read-write | This object represents the UUID of BLE advertisement packets. |
| I32 hh3cWlanBLEAgingTime | 1.3.6.1.4.1.25506.2.75.19.4.1.1.12 | Integer32 | read-write | This object represents the aging time for iBeacon devices. |
| OCT hh3cWlanBLEAPSerialID | 1.3.6.1.4.1.25506.2.75.19.4.1.1.1 | OCTET STRING | not-accessible | This object represents the serial ID of an AP. |
| OCT hh3cWlanBLECommandPassword | 1.3.6.1.4.1.25506.2.75.19.4.1.1.9 | OCTET STRING | read-write | This object represents the BLE module command password. |
| hh3cWlanBLEConfigEntry | 1.3.6.1.4.1.25506.2.75.19.4.1.1 | not-accessible | Each entry contains BLE location configuration information. | |
| hh3cWlanBLEConfigGroup | 1.3.6.1.4.1.25506.2.75.19.4 | |||
| hh3cWlanBLEConfigTable | 1.3.6.1.4.1.25506.2.75.19.4.1 | not-accessible | Administrators must configure Bluetooth Low Energy (BLE) parameters. | |
| OCT hh3cWlanBLEConnectPassword | 1.3.6.1.4.1.25506.2.75.19.4.1.1.8 | OCTET STRING | read-write | This object represents the BLE module connection password. |
| IP hh3cWlanBLEEngineAdd | 1.3.6.1.4.1.25506.2.75.19.4.1.1.3 | IpAddress | read-write | This object represents the server's IPv4 address to which BLE messages are sent. |
| I32 hh3cWlanBLEEnginePort | 1.3.6.1.4.1.25506.2.75.19.4.1.1.4 | Integer32 | read-write | This object represents the UDP port of the location server. |
| OCT hh3cWlanBLEModuleAPSerialID | 1.3.6.1.4.1.25506.2.75.19.4.2.1.1 | OCTET STRING | not-accessible | This object represents the serial ID of an AP. |
| hh3cWlanBLEModuleConfigEntry | 1.3.6.1.4.1.25506.2.75.19.4.2.1 | not-accessible | Each entry contains BLE module configuration information. | |
| hh3cWlanBLEModuleConfigTable | 1.3.6.1.4.1.25506.2.75.19.4.2 | not-accessible | Administrators must configure BLE module parameters. | |
| I32 hh3cWlanBLEModuleID | 1.3.6.1.4.1.25506.2.75.19.4.2.1.2 | Integer32 | not-accessible | This object represents the ID of a module. |
| OCT hh3cWlanBLERealTimePrefix | 1.3.6.1.4.1.25506.2.75.19.4.1.1.14 | OCTET STRING | read-write | This object represents the manufacturer prefix of BLE devices to be located. The prefix must be an even number. |
| T/F hh3cWlanBLERealTimeReportStatus | 1.3.6.1.4.1.25506.2.75.19.4.1.1.13 | TruthValue | read-write | This object represents the enabled or disabled status of BLE realtime reporting. |
| I32 hh3cWlanBLEReportInterval | 1.3.6.1.4.1.25506.2.75.19.4.1.1.11 | Integer32 | read-write | This object represents the interval at which an AP sends BLE messages to the server. |
| T/F hh3cWlanBLEReportStatus | 1.3.6.1.4.1.25506.2.75.19.4.1.1.10 | TruthValue | read-write | This object represents the enabled or disabled status of BLE location reporting. |
| T/F hh3cWlanBLERssiStatus | 1.3.6.1.4.1.25506.2.75.19.4.1.1.6 | TruthValue | read-write | This object represents the enabled or disabled status of BLE RSSI-based packet filtering. |
| I32 hh3cWlanBLERssiThreshold | 1.3.6.1.4.1.25506.2.75.19.4.1.1.7 | Integer32 | read-write | This object represents the max RSSI value of clients' packets. |
| T/F hh3cWlanBLEStatus | 1.3.6.1.4.1.25506.2.75.19.4.1.1.2 | TruthValue | read-write | This object represents the enabled or disabled status of BLE location. |
| I32 hh3cWlanBLEVendorPort | 1.3.6.1.4.1.25506.2.75.19.4.1.1.5 | Integer32 | read-write | This object represents the UDP port to listen for BLE messages from the server. |
| I32 hh3cWlanClientRateLimitCbs | 1.3.6.1.4.1.25506.2.75.19.6.1.1.11 | Integer32 | read-write | This object represents the CBS for receiving client packets. |
| I32 hh3cWlanClientRateLimitCir | 1.3.6.1.4.1.25506.2.75.19.6.1.1.10 | Integer32 | read-write | This object represents the CIR for receiving client packets. |
| T/F hh3cWlanClientRateLimitStatus | 1.3.6.1.4.1.25506.2.75.19.6.1.1.9 | TruthValue | read-write | This object represents the enabled or disabled status of client packet rate limiting. |
| OCT hh3cWlanCommonAPSerialID | 1.3.6.1.4.1.25506.2.75.19.6.1.1.1 | OCTET STRING | not-accessible | This object represents the serial ID of an AP. |
| hh3cWlanCommonConfigEntry | 1.3.6.1.4.1.25506.2.75.19.6.1.1 | not-accessible | Each entry contains common configuration information. | |
| hh3cWlanCommonConfigGroup | 1.3.6.1.4.1.25506.2.75.19.6 | |||
| hh3cWlanCommonConfigTable | 1.3.6.1.4.1.25506.2.75.19.6.1 | not-accessible | Administrators must configure common parameters. | |
| OCT hh3cWlanCupidAPSerialID | 1.3.6.1.4.1.25506.2.75.19.7.1.1.1 | OCTET STRING | not-accessible | This object represents the serial ID of an AP. |
| hh3cWlanCUPIDConfigEntry | 1.3.6.1.4.1.25506.2.75.19.7.1.1 | not-accessible | Each entry contains CUPID location configuration information. | |
| hh3cWlanCUPIDConfigGroup | 1.3.6.1.4.1.25506.2.75.19.7 | |||
| hh3cWlanCUPIDConfigTable | 1.3.6.1.4.1.25506.2.75.19.7.1 | not-accessible | Administrators must configure CUPID parameters. | |
| IP hh3cWlanCupidEngineAddr | 1.3.6.1.4.1.25506.2.75.19.7.1.1.3 | IpAddress | read-write | This object represents the IPv4 address of the CUPID location server. |
| I32 hh3cWlanCupidEnginePort | 1.3.6.1.4.1.25506.2.75.19.7.1.1.4 | Integer32 | read-write | This object represents the UDP port of the CUPID location server. |
| INT hh3cWlanCUPIDReportFormat | 1.3.6.1.4.1.25506.2.75.19.7.1.1.11 | INTEGER | read-write | This object represents the report format. |
| I32 hh3cWlanCupidReportInterval | 1.3.6.1.4.1.25506.2.75.19.7.1.1.7 | Integer32 | read-write | This object represents the interval for sending CUPID location packets. |
| INT hh3cWlanCupidReportMode | 1.3.6.1.4.1.25506.2.75.19.7.1.1.10 | INTEGER | read-write | This object represents the report mode. |
| T/F hh3cWlanCupidReportStatus | 1.3.6.1.4.1.25506.2.75.19.7.1.1.6 | TruthValue | read-write | This object represents the status of CUPID location reporting. |
| T/F hh3cWlanCupidStatus | 1.3.6.1.4.1.25506.2.75.19.7.1.1.2 | TruthValue | read-write | This object represents the status of CUPID location. |
| T/F hh3cWlanCupidUnassMeasureSta | 1.3.6.1.4.1.25506.2.75.19.7.1.1.9 | TruthValue | read-write | This object represents the status of CUPID location for unassociated clients. |
| T/F hh3cWlanCupidUnassSta | 1.3.6.1.4.1.25506.2.75.19.7.1.1.8 | TruthValue | read-write | This object represents the status of unassociated client information reporting for CUPID location. |
| I32 hh3cWlanCupidVendorPort | 1.3.6.1.4.1.25506.2.75.19.7.1.1.5 | Integer32 | read-write | This object represents the UDP port to listen for CUPID messages from the server. |
| I32 hh3cWlanDilutionFactor | 1.3.6.1.4.1.25506.2.75.19.6.1.1.3 | Integer32 | read-write | This object represents the packet dilution factor. |
| T/F hh3cWlanDilutionStatus | 1.3.6.1.4.1.25506.2.75.19.6.1.1.2 | TruthValue | read-write | This object represents the enabled or disabled status of packet dilution. |
| I32 hh3cWlanDilutionTimeout | 1.3.6.1.4.1.25506.2.75.19.6.1.1.4 | Integer32 | read-write | This object represents the packet dilution timeout. |
| hh3cWlanFlexAppCFG | 1.3.6.1.4.1.25506.2.75.19 | This MIB provides information about WLAN application configuration. | ||
| OCT hh3cWlanFPAPSerialID | 1.3.6.1.4.1.25506.2.75.19.8.1.1.1 | OCTET STRING | not-accessible | This object represents the serial ID of an AP. |
| hh3cWlanFPConfigEntry | 1.3.6.1.4.1.25506.2.75.19.8.1.1 | not-accessible | Each entry contains RF fingerprinting configuration information. | |
| hh3cWlanFPConfigGroup | 1.3.6.1.4.1.25506.2.75.19.8 | |||
| hh3cWlanFPConfigTable | 1.3.6.1.4.1.25506.2.75.19.8.1 | not-accessible | Administrators must configure RF fingerprinting parameters. | |
| IP hh3cWlanFPEngineAddr | 1.3.6.1.4.1.25506.2.75.19.8.1.1.3 | IpAddress | read-write | This object represents the IPv4 address of the RF fingerprinting server. |
| I32 hh3cWlanFPEnginePort | 1.3.6.1.4.1.25506.2.75.19.8.1.1.4 | Integer32 | read-write | This object represents the UDP port of the RF fingerprinting server. |
| T/F hh3cWlanFPMUReport | 1.3.6.1.4.1.25506.2.75.19.8.1.1.7 | TruthValue | read-write | This object represents the status of MU information reporting for RF fingerprinting. |
| T/F hh3cWlanFPRawFrameReport | 1.3.6.1.4.1.25506.2.75.19.8.1.1.6 | TruthValue | read-write | This object represents the status of raw frame reporting for RF fingerprinting. |
| INT hh3cWlanFPReportFormat | 1.3.6.1.4.1.25506.2.75.19.8.1.1.9 | INTEGER | read-write | This object represents the report format. |
| INT hh3cWlanFPReportMode | 1.3.6.1.4.1.25506.2.75.19.8.1.1.8 | INTEGER | read-write | This object represents the report mode. |
| T/F hh3cWlanFPStatus | 1.3.6.1.4.1.25506.2.75.19.8.1.1.2 | TruthValue | read-write | This object represents the enabled or disabled status of RF fingerprinting. |
| MAC hh3cWlanFPTagMultiAddr | 1.3.6.1.4.1.25506.2.75.19.8.1.1.10 | MacAddress | read-write | This object represents Tag's multicast MAC address. |
| I32 hh3cWlanFPVendorPort | 1.3.6.1.4.1.25506.2.75.19.8.1.1.5 | Integer32 | read-write | This object represents the UDP port to listen for RF fingerprinting packets from the server. |
| T/F hh3cWlanIgnoreApFrame | 1.3.6.1.4.1.25506.2.75.19.6.1.1.14 | TruthValue | read-write | This object represents the enabled or disabled status of AP packet ignoring. |
| T/F hh3cWlanIgnoreBeacon | 1.3.6.1.4.1.25506.2.75.19.6.1.1.5 | TruthValue | read-write | This object represents the enabled or disabled status of beacon ignoring. |
| OCT hh3cWlanIOTAPSerialID | 1.3.6.1.4.1.25506.2.75.19.2.1.1.1 | OCTET STRING | not-accessible | This object represents the serial ID of an AP. |
| hh3cWlanIOTConfigEntry | 1.3.6.1.4.1.25506.2.75.19.2.1.1 | not-accessible | Each entry contains module configuration information. | |
| hh3cWlanIOTConfigGroup | 1.3.6.1.4.1.25506.2.75.19.2 | |||
| hh3cWlanIOTConfigTable | 1.3.6.1.4.1.25506.2.75.19.2.1 | not-accessible | Administrators must configure IOT parameters. | |
| IP hh3cWlanIOTEngineAdd | 1.3.6.1.4.1.25506.2.75.19.2.1.1.2 | IpAddress | read-write | This object represents the IPv4 address of the location server. |
| I32 hh3cWlanIOTEnginePort | 1.3.6.1.4.1.25506.2.75.19.2.1.1.3 | Integer32 | read-write | This object represents the UDP port to listen for IOT messages from the server. |
| hh3cWlanModuleConfigEntry | 1.3.6.1.4.1.25506.2.75.19.1.1.1 | not-accessible | Each entry contains module configuration information. | |
| hh3cWlanModuleConfigGroup | 1.3.6.1.4.1.25506.2.75.19.1 | |||
| hh3cWlanModuleConfigTable | 1.3.6.1.4.1.25506.2.75.19.1.1 | not-accessible | Administrators must configure module parameters for a module to operate. | |
| I32 hh3cWlanModuleID | 1.3.6.1.4.1.25506.2.75.19.1.1.1.2 | Integer32 | not-accessible | This object represents the module ID of a module. |
| hh3cWlanModuleInfoEntry | 1.3.6.1.4.1.25506.2.75.19.1.2.1 | not-accessible | Each entry contains IOT module information. | |
| hh3cWlanModuleInfoTable | 1.3.6.1.4.1.25506.2.75.19.1.2 | not-accessible | The table contains information about each module of an AP. | |
| NTF hh3cWlanModuleInsertTrap | 1.3.6.1.4.1.25506.2.75.19.3.0.1 | This notification will be generated when an IOT module is inserted. | ||
| OCT hh3cWlanModuleManualUpdate | 1.3.6.1.4.1.25506.2.75.19.1.1.1.9 | OCTET STRING | read-write | This object represents the file path for module firmware updating. |
| NTF hh3cWlanModuleMissMatch | 1.3.6.1.4.1.25506.2.75.19.3.0.3 | This notification will be generated when the configured type doesn't match the module type. | ||
| hh3cWlanModuleNotifyGroup | 1.3.6.1.4.1.25506.2.75.19.3 | |||
| INT hh3cWlanModuleReset | 1.3.6.1.4.1.25506.2.75.19.1.1.1.5 | INTEGER | read-write | When read the value from the node none: Represents the module has been rebooted and the status of the module is normal. When write the value to the node reboot: Represents module rebooting. Other values are not supported. |
| NTF hh3cWlanModuleRomveTrap | 1.3.6.1.4.1.25506.2.75.19.3.0.2 | This notification will be generated when an IOT module is removed. | ||
| INT hh3cWlanModuleRstFac | 1.3.6.1.4.1.25506.2.75.19.1.1.1.6 | INTEGER | read-write | When read the value from the node none: Represents the module has been restored and the status of the module is normal. When write the value to the node restore: Represents module restoring. Other values are not supported. |
| T/F hh3cWlanModuleStatus | 1.3.6.1.4.1.25506.2.75.19.1.1.1.4 | TruthValue | read-write | This object represents the enabled or disabled status of a module. |
| hh3cWlanModuleTraps | 1.3.6.1.4.1.25506.2.75.19.3.0 | |||
| hh3cWlanModuleTrapVarObjects | 1.3.6.1.4.1.25506.2.75.19.3.1 | |||
| I32 hh3cWlanModuleTxPower | 1.3.6.1.4.1.25506.2.75.19.1.1.1.8 | Integer32 | read-write | This object represents the packet transmit power. |
| INT hh3cWlanModuleType | 1.3.6.1.4.1.25506.2.75.19.1.1.1.3 | INTEGER | read-write | This object represents the type of a module. |
| T/F hh3cWlanModuleUpWareStatus | 1.3.6.1.4.1.25506.2.75.19.1.1.1.7 | TruthValue | read-write | This object represents the enabled or disabled status of module auto update. |
| I32 hh3cWlanRateLimitCbs | 1.3.6.1.4.1.25506.2.75.19.6.1.1.8 | Integer32 | read-write | This object represents the CBS for sending location packets. |
| I32 hh3cWlanRateLimitCir | 1.3.6.1.4.1.25506.2.75.19.6.1.1.7 | Integer32 | read-write | This object represents the CIR for sending location packets. |
| T/F hh3cWlanRateLimitStatus | 1.3.6.1.4.1.25506.2.75.19.6.1.1.6 | TruthValue | read-write | This object represents the enabled or disabled status of location packet rate limiting. |
| T/F hh3cWlanRssiStatus | 1.3.6.1.4.1.25506.2.75.19.6.1.1.12 | TruthValue | read-write | This object represents the enabled or disabled status of RSSI-based packet filtering. |
| I32 hh3cWlanRssiThreshold | 1.3.6.1.4.1.25506.2.75.19.6.1.1.13 | Integer32 | read-write | This object represents the max RSSI value of clients' packets. |
| MAC hh3cWlanTrapAPMacAddress | 1.3.6.1.4.1.25506.2.75.19.3.1.1 | MacAddress | accessible-for-notify | This object represents the MAC address of an AP. |
| INT hh3cWlanTrapModuleCfgType | 1.3.6.1.4.1.25506.2.75.19.3.1.3 | INTEGER | accessible-for-notify | This object represents the configuration type of a module. |
| OCT hh3cWlanTrapModuleHwVersion | 1.3.6.1.4.1.25506.2.75.19.3.1.6 | OCTET STRING | accessible-for-notify | This object represents the hardware version of a module. |
| I32 hh3cWlanTrapModuleID | 1.3.6.1.4.1.25506.2.75.19.3.1.2 | Integer32 | accessible-for-notify | This object represents the ID of a module. |
| OCT hh3cWlanTrapModuleModel | 1.3.6.1.4.1.25506.2.75.19.3.1.5 | OCTET STRING | accessible-for-notify | This object represents the model of a module. |
| INT hh3cWlanTrapModulePhyType | 1.3.6.1.4.1.25506.2.75.19.3.1.4 | INTEGER | accessible-for-notify | This object represents the physical type of a module. |
| OCT hh3cWlanTrapModuleSequenceId | 1.3.6.1.4.1.25506.2.75.19.3.1.8 | OCTET STRING | accessible-for-notify | This object represents the sequence ID of a module. |
| OCT hh3cWlanTrapModuleSwVersion | 1.3.6.1.4.1.25506.2.75.19.3.1.7 | OCTET STRING | accessible-for-notify | This object represents the software version of a module. |
RFC description
Provides configuration for WLAN flexible application modules including BLE, AE, CUPID, and fingerprinting.
Start monitoring New H3C Technologies wireless access point (pluggable FlexApp/IoT modules) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.